Epson PriorityFAX 1000 Product Support Bulletin(s)
Epson PriorityFAX 1000 Manual
 |
View all Epson PriorityFAX 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PriorityFAX 1000 manual content summary:
- Epson PriorityFAX 1000 | Product Support Bulletin(s) - Page 1
Support Bulletin Subject: Priority Fax 1000 Maintenance Switch Function Tables Date: 8/8/90 Page: 1 of 7 PSB No: P-0071 Originator: VB The purpose of this document is to describe the PriorityFax IO00 maintenance soft switch functions and to supply instructions mode call Epson Product Support at - Epson PriorityFAX 1000 | Product Support Bulletin(s) - Page 2
functions in Table 1 marked "NOT USED" are either not available or require specialized equipment. They should only be accessed by an authorized Epson Customer Care Center. EEPROM PARAMETER INITIALIZATION Function Sets the EEPROM memory content, user switch data, and soft switch data to the factory - Epson PriorityFAX 1000 | Product Support Bulletin(s) - Page 3
second level of soft switch functions is accessed through switch 10 of the initial level of function switches. Refer to Figure 2 for instructions on accessing and changing these functions. SECOND LEVEL SOFT SWITCH DATA PRINTOUT 1. To print the "System Configuration List" which contains the Second - Epson PriorityFAX 1000 | Product Support Bulletin(s) - Page 4
"START/COPY" key is pressed, regardless of whether the hand set is on- hook or off- hook. This mode is used for cross testing two fax machines when they are connected directly to each other. TABLE 3 - Switches 1 - 4: Stan/End Transmission speed in 63 mode The starting and ending transmission speed - Epson PriorityFAX 1000 | Product Support Bulletin(s) - Page 5
PSB No: P-0071 Page: 5 of 7 TABLE 4 - Switches 3 & 4: Modem Equalizer These switches are used for setting the modem equalizer to compensate for line loss. The function section of Table 4 lists the relationship between the line loss and the appropriate switch setting that compensates for that loss. - Epson PriorityFAX 1000 | Product Support Bulletin(s) - Page 6
PSB No: P-0071 Page: 6 of 7 To enter Inttlal Halntenance Mode, Hold down the FINE/PHOTO and START/COPY buttons while aoDlYlng Dower. Initial Maintenance Mode , I Press FINE/PHOTO 1 time Press START/COPY 10 times Press FINE/PHOTO 1 time Sets second digit to 1 Sets first digit to 0 Completes - Epson PriorityFAX 1000 | Product Support Bulletin(s) - Page 7
I ISuitch' Faction Naber Dercriptim I I I01 EEPR# PMMETER lYfTlAlIzATlw I OATA lYtllALl2ATlw PSB No: P-0071 Page: 7 of 7 I I Switch nuler Dorcriptim Ructch ' IRotting I O V E R S E A S -ICATlOR 0 'Off RODE (Rraption) I 10I1 Fuwxion DIRECT CONYECTIOll #OE I 1 S-8 1 ROT USED I 0 OFF - Epson PriorityFAX 1000 | Product Support Bulletin(s) - Page 8
EPSON EPSON AMERICA, INC. Product Support Bulletin Subject: PriorityFax 1000 Equipment Error Codes Date: 3/7/90 Page: 1 of 3 PSB No: P-0061 Originator: VB This product support bulletin explains the procedure for reading and interpreting PriorityFax 1000 (PF1000) error codes. The PF1000 - Epson PriorityFAX 1000 | Product Support Bulletin(s) - Page 9
PSB No: P-0061 Page: 2 of 3 For example, if a document is being sent and is not detected by document sensor 2, the PF1000 will go into error mode. Simultaneously pressing and holding the FINE/PHOTO and the START/COPY buttons until the buzzer stops sounding, sets the PF1000 into an error code display - Epson PriorityFAX 1000 | Product Support Bulletin(s) - Page 10
PSB No: P-0061 Page: 3 of 3 Table 1 EQUIPMENT ERROR CODES 1 .STATE ON RDIFN(PH *SD = SENDING DOCUMENT LED *RD = RECEIVING DOCUMENT LED *FN = FINE LED *PH = PHOTO LED Error Codes I 1 0 0 0 1 0 0 0 Paper jam error 1 0 0 0 1 0 0 1 Auto cutter jam error 1 0 0 0 1 0 1 0 Head connector open error
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
EPSON
EPSON AMERICA, INC.
INFORMATION
Product Support Bulletin
Subject: Priority Fax 1000 Maintenance Switch Function Tables
Date: 8/8/90
PSB No: P-0071
Page:
1 of 7
Originator: VB
The purpose of this document is to describe the PriorityFax IO00 maintenance
soft switch functions and to supply instructions for accessing them.
ACCESSING THE MAINTENANCE MODE
1.
2.
3.
4.
To enter the maintenance mode, apply AC power while pressing the
“FINE/PHOTO” and the “START/COPY” keys.
The unit will output a long beep and the “ERROR” LED will blink,
indicating the unit is in maintenance mode. If the unit does not enter
the maintenance mode call Epson Product Support at 213- 539 - 9955
for assistance.
There are 2 levels of soft switch functions accessible in the
maintenance mode. Table 1 lists the initial level functions. Tables 2,
3, and 4 list the second level functions. The tables are located at the
end of this document.
The following operations explain how to execute the first level soft
switch functions listed in Table 1.
A. In Table 1, the second digit of the “Switch Number” is the number
on the left. To enter a “1” as the second digit of the “Switch
Number”, press the “FINE/ PHOTO” key once. At this point, If the
“FINE/PHOTO” key is not pressed before the “START/COPY’ key,
the second digit remains as zero.
B. To Enter the first digit of the “Switch Number” press the
“START/COPY’ key the number of times equal to the first digit of
the “Switch Number” to be selected. To enter zero press the
“START/COPY” key10 times.
C. To complete the code entry, press the “FINE/PHOTO” key one time.
D. The unit returns to the initial maintenance mode when the number
entered does not correspond to a function listed in Table 1.