Epson Moverio BT-40S Users Guide
Epson Moverio BT-40S Manual
 |
View all Epson Moverio BT-40S manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson Moverio BT-40S manual content summary:
- Epson Moverio BT-40S | Users Guide - Page 1
Clip Ambient light sensor USB Type-C connector Safety Instructions Dedicated controller (Intelligent Controller BO-IC400) *The Intelligent Controller BO-IC400 is supplied with the BT-40S. For more information about the BO-IC400, see the "BO-IC400 User's Guide". SD card slot pin USB cable BO-IC400 - Epson Moverio BT-40S | Users Guide - Page 2
supports images output in USB Type-C DisplayPort Alternate Mode. 3 If you are using an Android device, you can adjust the brightness of the headset's screen as well as other parameters by using the dedicated app. BT-40: Install the app "MOVERIO Link" on your smart device using Google Play. BT-40S - Epson Moverio BT-40S | Users Guide - Page 3
When replacing the nose pad, be sure to purchase the option for the BT-40. Pull the nose pad straight towards you to remove and replace them. Support Information The following Website provides information on app development and firmware updates for this product. https://tech.moverio.epson.com/en/ - Epson Moverio BT-40S | Users Guide - Page 4
BO-IC400, see the "BO-IC400 User's Guide". Model number BT-40 (H969A) Display format Si-OLED Panel size 0.453" wide panel (16:9) Resolution 1920 x 1080 Angle of view Approximately 34 degrees (diagonally) Virtual screen size 60" support (virtual viewing distance 2.5 m [8.2 feet]) Color
-
1 -
2 -
3 -
4
 |
 |
Earphone jack
USB Type-C connector
Headset
Temples
Lens
Nose pad
Ambient light sensor
Sensors
Shade
Clip
Dedicated controller
(Intelligent Controller BO-IC400)
*The Intelligent Controller BO-IC400
is supplied with the BT-40S. For more
information about the BO-IC400, see
the “BO-IC400 User's Guide”.
SD card slot pin
USB cable
BO-IC400 User's Guide
User's Guide (this document)
Safety Instructions
© 2020 Seiko Epson Corporation
414016900 EN 2020.07
Please read this guide first. Also, make sure you read the “Safety Instructions” sheet
supplied before using this product.
See the following website for additional information:
User's Guide
Included Items and Headset Part Names
This product is only for use with USB Type-C DisplayPort Alternate Mode.
Optional Items
The following optional items are available. These optional items are available as of July 2020. Availability and part numbers vary by region and are
subject to change without notice.
• Intelligent Controller BO-IC400*
• Shade Pack BO-SP400
• Nose Pad Pack BO-NP350
• Nose Pad Pack BO-NP300
*Supplied with the BT-40S.
•
This product is powered using the battery in your smart device or the Intelligent Controller (hereinafter, these are collectively referred to as the "connected
device"). While using the product, keep an eye on the battery level of your connected device.
•
The BT-40 does not come with an Intelligent Controller. You need to provide a smart device that supports USB Type-C DisplayPort Alternate Mode.