Epson Moverio BT-35ES Users Guide
Epson Moverio BT-35ES Manual
 |
View all Epson Moverio BT-35ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson Moverio BT-35ES manual content summary:
- Epson Moverio BT-35ES | Users Guide - Page 1
User's Guide © 2018 Epson America, Inc., 9/18 CPD-55906R1 Information on the Moverio Website Provides technical information. https://tech.moverio.epson.com/en/bt-35e/ - Epson Moverio BT-35ES | Users Guide - Page 2
Instructions Glasses 21 Using the Shade 21 Using the Belt Clip/Cable Retainer 22 Replacing the Parts 24 Attaching and Removing the Shield 24 Replacing the Temple Grip 25 Replacing the Nose Pads 26 Supported Equipment and Software 27 Updating the Firmware 28 Maintenance 29 Troubleshooting - Epson Moverio BT-35ES | Users Guide - Page 3
safely using this product, basic operating methods, and troubleshooting. Make sure you read this guide before using the product. Start Guide Explains procedures for using this product for the first time. Symbols Used in this Guide ■■Safety symbols Warning This symbol indicates information that - Epson Moverio BT-35ES | Users Guide - Page 4
burns if it is in contact with your skin for too long, even if it is in a pocket or over clothing. Do not expose the camera lens to direct sunlight for a long time. Doing so may result in fire or explosion due to condensed beams of light from the lens. - Epson Moverio BT-35ES | Users Guide - Page 5
Safety Instructions Warning Product usage precautions Do not start using this product result in electric shock, malfunction, or fire. The product housing should only be opened by qualified service personnel. Also, do not disassemble or remodel the product (including consumable items). Many of the - Epson Moverio BT-35ES | Users Guide - Page 6
Safety Instructions When using this product in small locations, be aware of your Product abnormality precautions In the following situations, unplug the power supply cable, and contact the Epson service call center. Continuing to use under these conditions may result in fire or electric shock. - Epson Moverio BT-35ES | Users Guide - Page 7
Instructions product may result in injury due to glass fragments. When wearing this product, the manuals. Doing so may result in injury. If a problem 3D image is perceived varies depending on the individual. Stop using the 3D function if you feel strange or cannot see in 3D. Continuing to view the 3D - Epson Moverio BT-35ES | Users Guide - Page 8
0N1o_tCeshoapntUersatigtlee 01_Head A This product uses an Si-OLED display panel. Due to the characteris- tics of the Si-OLED, you may notice burn-in or decreasing luminance o02n_t_hleeapdanel. This is not a malfunction. To reduce the burn-in, do the following. • Do not display the same image for a - Epson Moverio BT-35ES | Users Guide - Page 9
0In1c_luCdheadptIeter mtitsle 01_Head A Headset 02__lead ➡➡"Headset" p.11 Interface unit ➡➡"Interface Unit" p.10 AC adapter with plug attachment ➡➡"Inputs and Outputs" p.12 Dedicated micro-USB power supply cable ➡➡"Inputs and Outputs" p.12 Clear and shaded safety shields ➡➡"Attaching and - Epson Moverio BT-35ES | Users Guide - Page 10
HDMI" p.13 ➡➡"Connecting by USB Type-C" p.14 USB-C port Connects to external devices that support USB Type-C. You can input video signals and supply power from the connected device. You can also output camera data and sensor data from the headset to the connected device. ➡➡"Connecting by USB TypeC - Epson Moverio BT-35ES | Users Guide - Page 11
the Temple Grip" p.25 Ambient light sensor Senses the brightness of your surroundings and automatically adjusts the brightness of the screen. Camera Captures images and movies. Remove the protective film before use. Interface unit connector Inserts into the interface unit. ➡➡"Connecting by HDMI - Epson Moverio BT-35ES | Users Guide - Page 12
Outputs 0T2h_e_lienatderface unit and external devices input/output the following data and power supply. Port Name Input/Output USB-C • Outputs camera or sensor data. • Inputs video signals. • Supplies power. HDMI Inputs video signals. Micro-B Only supplies power. (Connects the AC adapter - Epson Moverio BT-35ES | Users Guide - Page 13
to the USB-C port. Video signals from the HDMI port have priority over video signals from the USB-C port. ➡➡"When using the headset sensors or camera" p.15 • Make sure you connect the headset before you connect the power supply. • Do not connect or disconnect the headset while it is operating - Epson Moverio BT-35ES | Users Guide - Page 14
device with USB Type-C, you can use data from the headset sensors and camera as well as view the images. Also, since it can be used as USB Type-C cable before unplugging the headset cable. • The connected equipment must support USB 2.0/3.0. • Make sure you use a genuine USB-IF certified USB-C 3.1 - Epson Moverio BT-35ES | Users Guide - Page 15
Equipment and Software" p.27 • To display images using USB Type-C, the connected device must support video output by USB Type-C. • Depending on the device, displaying images may not be supported. See the manual supplied with the equipment you want to connect for more information. Notes on supplying - Epson Moverio BT-35ES | Users Guide - Page 16
0Tu1r_nCihnagpOtenr/Dtitisleplaying Images 0W1he_nHpoewaedr isAsupplied from the Micro-B port or USB-C port, this product turns on. Also, when a video signal is 0b2e_in_lgeaidnput, the video is displayed automatically. When no video signal is being input, is shown on the display. While viewing - Epson Moverio BT-35ES | Users Guide - Page 17
Standby Mode and AV Mute Although standby mode and AV mute will hide the images and mute the audio, there are a few differences. Select the appropriate mode to suit your needs. Setting Time to Display Power Images Consumed Standby Hold down the [ ] Long mode button (approx. 8 secs.) Low power - Epson Moverio BT-35ES | Users Guide - Page 18
extended features in the display or by using the LED indicators. 02__lead Switching between 2D and 3D display This product uses the side-by-side 3D display format. To switch between 2D and 3D mode, hold down the [ ] and the [ ] keys at the same time. Adjusting the screen brightness automatically - Epson Moverio BT-35ES | Users Guide - Page 19
Extended Features Changing the mode setting The following three modes are available. To switch the mode, hold down the [ ] key and the [ ] button at the same time. Power saving feature*1 [ ] button*2 Mode 1 (Default setting) Mode 2 Enabled Disabled Operations available Operations available - Epson Moverio BT-35ES | Users Guide - Page 20
0W1e_aCrhinagptehretHiteleadset 0A1U_sHe beoathdhaAnds to open the temples, and then put 02__olenatdhe headset. Do not use too much force when opening the temples of the headset. B Adjust the position of the headset so that you can see the image. • How an image is perceived varies depending on the - Epson Moverio BT-35ES | Users Guide - Page 21
and the lens of the headset when wearing. • You may not be able to wear the headset over the glasses depending on the shape of your glasses. Using the Shaded Shield If the surrounding ambient light is too bright to view the screen when wearing the headset, attach the shaded shield. ➡➡"Attaching - Epson Moverio BT-35ES | Users Guide - Page 22
0U1s_inCghtahpeteBretlittlCelip/Cable Retainer Y0o1u_caHneatatadchAthe interface unit to the belt by using a belt clip or cable retainer. Y02o_u_lceaand also secure extra cables to the cable retainer by using a commercially available band. B Connect the cables. A Attach the belt clip to the - Epson Moverio BT-35ES | Users Guide - Page 23
Using the Belt Clip/Cable Retainer Use the same procedure to attach the cable retainer to the belt. You can secure other cables using commercially available bands and so on so that they do not catch on anything in the surrounding area. Caution • Keep the cables as close to your body as possible. - Epson Moverio BT-35ES | Users Guide - Page 24
0R1e_pClahcainpgtetrhteitPlearts A01tt_aHcehaindgAand Removing the Shield T02h_is_lperaodduct includes clear and shaded safety shields. If it is too bright to view the screen when wearing the headset, attach the shaded shield. ■■Attaching the shield Hold the shield at an angle and press it against - Epson Moverio BT-35ES | Users Guide - Page 25
01_Chapter title 0R1e_pHlaecaindgAthe Temple Grip 02__lead A Press the part indicated by the circle ( ) and remove the tip of the temple grip. Replacing the Parts C Slide the replacement temple grip into the groove in the headset. B Slide off the remaining temple grip. D While pressing the part - Epson Moverio BT-35ES | Users Guide - Page 26
Replacing the Nose Pads A Pull the nose pads towards you to remove them. B Attach the replacement nose pads. Replacing the Parts 26 - Epson Moverio BT-35ES | Users Guide - Page 27
), 640 x 480 (60 Hz) Computers and smart devices with USB Type-C ports that support DisplayPort Alternate Mode on USB Type-C*1 1920 x SDK (Software Development Kit) to control the sensor, camera, and display from your application. See the Developer's Guide (https://tech.moverio.epson. com/en/bt-35e - Epson Moverio BT-35ES | Users Guide - Page 28
0U1p_dCahtianpgtethr etitFliermware D0o1w_nHloaedatdheAfirmware to your computer from the following download site, and then update it using the E02p_s_olenaBdT-35E Update Tool. See the firmware release notes for more information. https://tech.moverio.epson.com/en/bt-35e/download. html 28 - Epson Moverio BT-35ES | Users Guide - Page 29
a soft cloth. When wiping the lenses, do not use lens cleaning liquids or organic solvents. • If the camera is dirty, wipe it carefully with a soft cloth. • If any parts other than the lens or camera are dirty, wipe them with a wet tissue. Cleaning the connector ports • If the connectors on the - Epson Moverio BT-35ES | Users Guide - Page 30
while, and then reconnect. • If images are not displayed by a USB Type-C connection, check that the connected equipment supports video output by USB Type-C. This product supports DisplayPort Alternate mode (DP ALT mode) for USB Type-C. Images are fuzzy • Reconnect the cables. • Restart the connected - Epson Moverio BT-35ES | Users Guide - Page 31
Color reproduction Supported 3D Connector ports Operating temperature Storage temperature Model Number AC adapter Manufacturer Rated output voltage/current Exterior dimensions Headset (W x D x H) Interface unit Mass Headset Interface unit Camera Earphone output Sensors BT-35E (H935A - Epson Moverio BT-35ES | Users Guide - Page 32
-C HDMI Resolution (frame rate) EDID CEC HDCP 3D formats HDMI Data Transfer Video interface Resolution (frame 60 Hz/59.94 Hz), 1280 x 720 (30Hz), 640 x 480 (60 Hz) Supported Not supported Rev. 1.4 Not supported Not supported DisplayPort Alternate Mode (DP Alt Mode) 1920 x 1080 (60 Hz/59.94 Hz), 1280 - Epson Moverio BT-35ES | Users Guide - Page 33
0In1t_eCllhecatputaelrPtirtoleperty Rights 01_Head A Notations In this guide, the Microsoft® Windows® 10 operating system is referred to as "Windows 10". 02__lead Trademarks "EPSON" is a registered trademark of the Seiko Epson Corporation. "EXCEED YOUR VISION" is a registered trademark or a - Epson Moverio BT-35ES | Users Guide - Page 34
of sale. When using this product outside the country of sale, contact your nearest support center. When this product is used for applications requiring high reliability/safety such as a statistical basis as required by 47CFR 2.909. Trade Name : EPSON Type of Product : Smart Glasses Model : H935A 34 - Epson Moverio BT-35ES | Users Guide - Page 35
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there the importer in accordance with requirements of EU directive Manufacturer: SEIKO EPSON CORPORATION Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan - Epson Moverio BT-35ES | Users Guide - Page 36
General Notes List of Safety Symbols The following table lists the meaning of the safety symbols labeled on the equipment. No. Symbol mark A Approved standards IEC60417 No. 5007 Meaning "ON" (power) To indicate connection to the mains. B IEC60417 "OFF" (power) No. 5008 To indicate - Epson Moverio BT-35ES | Users Guide - Page 37
No. Symbol mark Approved standards K IEC60417 No. 5172 L ISO 3864 M ISO 3864 N IEC60417 No. 5266 Meaning Class II equipment To identify equipment meeting the safety requirements specified for Class II equipment according to IEC 61140. General prohibition To identify actions or operations - Epson Moverio BT-35ES | Users Guide - Page 38
.com AUSTRIA Epson Deutschland GmbH http://www.epson.at BULGARIA Epson Service Center Bulgaria http://www.kolbis.com CROATIA MR servis d.o.o. http://www.mrservis.hr DENMARK Epson Denmark http://www.epson.dk ESTONIA Epson Service Center Estonia http://www.epson.ee GERMANY Epson Deutschland GmbH - Epson Moverio BT-35ES | Users Guide - Page 39
.co.il LITHUANIA Epson Service Center Lithuania http://www.epson.lt NORWAY Epson Norway http://www.epson.no RUSSIA Epson CIS http://www.epson.ru ITALY Epson Italia s.p.a. http://www.epson.it LUXEMBURG Epson Europe B.V. Branch office Belgium http://www.epson.be POLAND Epson Europe B.V. Branch Office - Epson Moverio BT-35ES | Users Guide - Page 40
Ltd. http://www.epson.com.au CHINA Epson (China) Co., Ltd. http://www.epson.com.cn MEXICO Epson Mexico, S.A. de C.V. http://www.epson.com.mx CHILE Epson Chile S.A. http://www.epson.cl HONG KONG Epson Hong Kong Ltd. http://www.epson.com.hk 40 ECUADOR Epson Ecuador http://www.epson.com.ec COLOMBIA - Epson Moverio BT-35ES | Users Guide - Page 41
Co.,Ltd. http://www.epson.co.th JAPAN Seiko Epson Co. Toyoshina Plant http://www.epson.jp PHILIPPINES Epson Philippines Co. http://www.epson.com.ph KOREA Epson Korea Co., Ltd. http://www.epson.co.kr SINGAPORE Epson Singapore Pte. Ltd. http://www.epson.com.sg MALAYSIA Epson Malaysia Sdn. Bhd. http
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
 |
 |
© 2018 Epson America, Inc., 9/18
User's Guide
CPD-55906R1
Information on the Moverio Website
Provides technical information.