Epson Moverio BT-30C Safety Instructions and Notices

CPD-57212

© 2019 Epson America, Inc., 3/19

Printed in XXXXXX

Safety Instructions and Notices

Safety instructions

For your safety, read the attached documents carefully to use the product

correctly. After you have read the documents, keep them in a safe place so that

you can refer to them quickly at a later date.

■

Safety symbols

Warning

This symbol indicates information that, if ignored, could

possibly result in serious personal injury or even death due

to incorrect handling.

Caution

This symbol indicates information that, if ignored, could

possibly result in personal injury or physical damage due

to incorrect handling.

■

General information symbols

Indicates procedures which may result in damage or injury

if sufficient care is not taken.

Indicates additional information and points which may be

useful to know regarding a topic.

Warning

Usage environment and condition precautions

Only use this product at the stated power-supply voltage.

For your own safety, disconnect the product’s cable from the smart device when

you are not using this product. The insulation may deteriorate, which may result

in electric shock, fire, or malfunction.

Do not leave this product in locations subject to temperatures beyond the

specified operating range, such as cars with the windows closed, in direct

sunlight, or in front of air-conditioning or heater outlets. Also, avoid locations

subject to sudden changes in temperature. Doing so may result in fire,

breakdown, malfunction, or failure.

This product is not waterproof. Do not touch the connectors and cables for each

of the connector ports with wet hands. Failure to comply with these precautions

could result in fire, burns, or electric shock.

Do not use the product in locations where it may get wet or is subject to high

levels of humidity such as in a bath or shower. Failure to comply with these

precautions could result in fire or electric shock.

Do not place this product in locations subject to smoke, steam, high humidity,

or dust such as kitchen counters or near humidifiers. Doing so may result in fire,

electric shock, or deterioration in image quality.

Do not cover this product with a cloth or similar material during use. Doing so

may cause heat to change the case’s shape or result in fire.

The controller may become hot during operation. Note the following points to

prevent low temperature burns.

• Except when operating the brightness/volume buttons, attach the clip to your

clothing so that the controller does not come into direct contact with your

skin.

• When operating the buttons, do not hold down the same button continuously

for one minute or more.

• Do not allow the controller to be in contact with your skin for too long, even

if it is over clothing.

Do not expose the lens to direct sunlight for a long time. Doing so may result in

fire or explosion due to condensed beams of light from the lens.

Warning

Product usage precautions

The headset and shade use a powerful magnet. For your own safety, do not use

the shade if you have electronic implants such as a pacemaker.

For your own safety, note the following points when connecting this product to

a smart device.

• Laws and regulations prohibit viewing smart device screens while driving a

car, motorbike, or riding a bicycle.

• Be sure to follow all safety precautions provided with your smart device,

cautions on usage, and any other important warnings.

Do not start using this product at a high volume. Doing so may result in

hearing impairment. Lower the volume before turning off the product,

and gradually increase the volume after turning on the product. To

prevent possible hearing damage, do not listen at high volume for

prolonged periods of time.

Do not allow any conductive foreign objects to touch the USB Type-C connector

or earphone microphone socket, and do not put any conductive foreign objects

into the connection ports. Doing so may cause a short circuit and result in fire

or electric shock.

Do not allow solvents such as alcohol, benzene, or thinner to touch the product.

Also, do not clean this product with a wet cloth or solvents. Doing so may warp

or crack the product housing and may result in electric shock, malfunction, or

fire.

The product housing should only be opened by qualified service personnel.

Also, do not disassemble or remodel the product. Many of the parts inside the

product carry a high voltage and could cause fire, electric shock, accident, or

poisoning.

Do not subject the lens of the product to strong shocks or knock it against hard

objects. If the lens is damaged, it could splinter and cause serious injuries to your

eyes and face.

Do not throw the product into a fire and do not heat the product. Do not place

flaming objects, such as candles, on this product. Doing so may result in heat,

fire, or explosion.

Warning

Viewing image precautions

Do not wear this product while driving a car, riding a motorbike or bicycle, or

performing any other dangerous tasks. Doing so may result in accident or injury.

Do not use this product in unstable locations such as stairs or at altitude. Also,

do not use the product while walking in dangerous locations such as near

machinery or equipment that might get caught on the cables, where there is a

lot of traffic, or where it is dark. Doing so may result in accident or injury.

Be aware of your surroundings when walking and viewing images with the

product. If you are too focused on the image, you may get into an accident, fall

down, or collide with other people.

When viewing in dark locations, it is difficult to see your surroundings due to the

brightness of the image. Be aware of your surroundings.

Section	Page
Safety instructions	1
Where to get help	4

Epson Moverio BT-30C Safety Instructions and Notices

Epson Moverio BT-30C Manual

Epson Moverio BT-30C manual content summary: