Epson LightScene EV-110 Users Guide

Epson LightScene EV-110 Manual

Get Epson LightScene EV-110 PDF manuals and user guides View all Epson LightScene EV-110 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson LightScene EV-110 manual content summary:

  • Epson LightScene EV-110 | Users Guide - Page 1
    LightScene EV-110/115 User's Guide
  • Epson LightScene EV-110 | Users Guide - Page 2
  • Epson LightScene EV-110 | Users Guide - Page 3
    Contents LightScene EV-110/115 User's Guide ...9 Introduction to Your Projector ...10 Projector Features...10 the Documentation 14 Where to Go for Additional Information 15 Additional Projector Software and Manuals 15 Projector Part Locations ...16 Projector Parts - Front ...17 Projector Parts
  • Epson LightScene EV-110 | Users Guide - Page 4
    ...41 Connecting to a Wired Network ...41 Selecting Wired Network Settings 42 Wireless Network Projection ...45 Selecting Wireless Network Settings Manually 46 Wireless LAN Menu Settings ...49 Selecting Wireless Network Settings in Windows 52 Selecting Wireless Network Settings on Mac 52 Setting
  • Epson LightScene EV-110 | Users Guide - Page 5
    106 Setting the Projector ID ...107 Setting the Remote Control ID 107 Adjusting the Projector's Brightness Level 108 Adjusting Color Uniformity ...110 Blending the Image Edges ...112 Matching the Image Colors ...113 Scaling an Image...115 Projecting One Image Simultaneously (Synchronized Playback
  • Epson LightScene EV-110 | Users Guide - Page 6
    Selecting a Test Pattern Using the Remote Control 118 Selecting a Test Pattern Using the Menus 119 Scheduling Projector Events ...120 Saving a Scheduled Event...120 Viewing Scheduled Events ...121 Editing a Scheduled Event...122 Projector Security...123 Password Security Types ...123 Setting a
  • Epson LightScene EV-110 | Users Guide - Page 7
    Projector Light Status ...167 Solving Image or Sound Problems 170 Solutions When No Image Appears 170 Solutions When "No Signal" Message Appears 171 Displaying From a PC Laptop 172 Displaying From a Mac Laptop 172 Solutions When "Not Supported" Message Appears 173 Solutions When Only a Partial
  • Epson LightScene EV-110 | Users Guide - Page 8
    Specifications 191 Projector Safety and Approvals Specifications 191 Supported Video Display Formats...192 Notices ...194 Recycling (U.S. and Canada) ...194 Important Safety Information ...194 Laser Safety Information ...194 Important Safety Instructions...197 Restriction of Use ...200 List of
  • Epson LightScene EV-110 | Users Guide - Page 9
    LightScene EV-110/115 User's Guide Welcome to the LightScene EV-110/115 User's Guide. For a printable PDF copy of this guide, click here. 9
  • Epson LightScene EV-110 | Users Guide - Page 10
    Additional Projector Software and Manuals Projector Part Locations Projector Features The LightScene EV-110/115 projector includes these special Wired and wireless network support for projection, monitoring, and control via remote network computer • Use Epson iProjection software (Windows/Mac)
  • Epson LightScene EV-110 | Users Guide - Page 11
    distances • 2,500,000:1 contrast ratio and Dynamic Contrast control for sharp, detailed images • Epson's Direct Power On and Auto Power On features for quick and easy setup • Support for Crestron Connected network monitoring systems • Network message broadcast system to project timely messages to
  • Epson LightScene EV-110 | Users Guide - Page 12
    Make sure your projector box included all of these parts: 1 Projector 2 Remote control 3 Remote control batteries (2 AA alkaline) 4 Power cord 5 Cable cover 6 Direct mount 7 Cable clips 12
  • Epson LightScene EV-110 | Users Guide - Page 13
    type HDMI Additional component necessary Compatible HDMI cable Available for purchase from Epson or an authorized Epson reseller. Audio out USB Note: Older Mac computers (2009 and earlier) may not support HDMI audio. Commercially available 3.5 mm mini jack stereo cable Compatible USB cable
  • Epson LightScene EV-110 | Users Guide - Page 14
    projector. Note: Availability varies by region. Register your product online at this site: epson.com/webreg Registering also lets you receive special updates on new accessories, products, and services. Parent topic: Projector Features Notations Used in the Documentation Follow the guidelines in
  • Epson LightScene EV-110 | Users Guide - Page 15
    can install the projector software programs listed here and view their manuals for instructions on using them. Note: If you still need help after checking this manual and the sources listed here, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help
  • Epson LightScene EV-110 | Users Guide - Page 16
    Manual Description Epson iProjection app Instructions are included with the app (instructions included with the app available only in English) Lets you project from an iOS or Android device if your projector is connected to a network that includes a wireless access point. Visit epson.com/support
  • Epson LightScene EV-110 | Users Guide - Page 17
    Projector Parts - Rear Projector Parts - Interface Panel Projector Parts - Top Projector Parts - Remote Control Parent topic: Introduction to Your Projector Projector Parts - Front 1 Projection lens 2 Remote control receiver 3 Status lights 4 Ball joint adjustment screw 5 Ball joint 6 Air intake
  • Epson LightScene EV-110 | Users Guide - Page 18
    Related references Projector Light Status Related tasks Adjusting the Projection Angle Cleaning the Air Vents Projector Parts - Rear 1 Air exhaust vent 2 Interface panel 3 Power button 4 Cable clip attachment point 5 Power inlet 6 Cable cover Parent topic: Projector Part Locations 18
  • Epson LightScene EV-110 | Users Guide - Page 19
    Related references Projector Parts - Interface Panel Related tasks Cleaning the Air Vents Attaching and Removing the Cable Clips Projector Parts - Interface Panel 1 Network (LAN) port 2 HDMI port 3 SD card slot 4 Audio Out port 5 DC Out (2.0A)/GPI In port (Supplies power to a connected device or
  • Epson LightScene EV-110 | Users Guide - Page 20
    Related references Art-Net Channel Definitions Related tasks Connecting to a Computer for HDMI Video and Audio Connecting to an HDMI Video Source Connecting to External Speakers Inserting an SD Card Connecting to External Sensor Devices Connecting to a Streaming Media Player Connecting to Bluetooth
  • Epson LightScene EV-110 | Users Guide - Page 21
    3 Optional floor stand holes (6) Parent topic: Projector Part Locations Related concepts Projector Placement Related references Optional Equipment and Replacement Parts 21
  • Epson LightScene EV-110 | Users Guide - Page 22
    Projector Parts - Remote Control 1 Power button 2 HDMI button (selects HDMI video source) 3 LAN button (connects to a network source) 4 Numeric buttons (select playlist assigned to each numeric button) 22
  • Epson LightScene EV-110 | Users Guide - Page 23
    5 ID button (selects a projector to use with the remote control) 6 Menu button (accesses projector menu system) 7 Arrow buttons (move through on-screen options) 8 Enter button (selects options) 9 User button (customizable for different functions) 10 Focus button (adjusts projector focus) 11
  • Epson LightScene EV-110 | Users Guide - Page 24
    Using the Projector's Menus Focusing the Image Using the Focus Buttons Zooming Into and Out of Images Selecting a Test Pattern Using the Remote Control Using Spotlight Mode Shutting Off the Picture and Sound Temporarily 24
  • Epson LightScene EV-110 | Users Guide - Page 25
    lighting track (with the optional lighting track mount). Keep these considerations in mind as you select a projector location: • Follow the instructions in the Installation Guide to install the projector on a wall or ceiling. • If installing on a lighting track, use only the optional lighting track
  • Epson LightScene EV-110 | Users Guide - Page 26
    Projection Distance Parent topic: Setting Up the Projector Related references Optional Equipment and Replacement Parts Projector Setup and Installation Options You can set up or install your projector in the following ways: Mounted on a ceiling or lighting track Mounted on a wall 26
  • Epson LightScene EV-110 | Users Guide - Page 27
    Placed on the floor or on a table or portable cart Note: Use the direct mount (included) only for mounting the projector on a wall or ceiling. If installing on a lighting track, use only the optional lighting track mount (ELPMB66). If you do not mount the projector, use only the optional floor stand
  • Epson LightScene EV-110 | Users Guide - Page 28
    If you are installing multiple projectors next to each other, be sure to leave at least 20 inches (50 cm) of space between the projectors. Also make sure heated air from an exhaust vent does not go into the air intake vent of another projector. You can rotate the projection unit 360 degrees
  • Epson LightScene EV-110 | Users Guide - Page 29
    using the ball joint on the projection unit. 1. Turn the projector on. 2. Loosen the ball joint screw using the supplied hexagonal wrench. Make sure to support the projection unit while loosening the screw so that it does not move suddenly. Warning: Do not grip the ball joint with your fingers while
  • Epson LightScene EV-110 | Users Guide - Page 30
    tighten the ball joint screw using the supplied hexagonal wrench. Make sure to support the projection unit so that it does not move. Caution: Do not ratio, and other settings. Refer to the tables in the Installation Guide to determine approximately how far to place the projector from the screen
  • Epson LightScene EV-110 | Users Guide - Page 31
    Attaching and Removing the Cable Clips You can install the cable clips that came with your projector to provide additional support to the power cord and HDMI cable. 1. Connect the power cord and HDMI cable to the projector. 2. Insert the end of each cable clip anchor
  • Epson LightScene EV-110 | Users Guide - Page 32
    a stereo analog signal if you are connecting to external speakers. (Make sure the HDMI audio playback device on your computer's audio settings is set to EPSON PJ.) Parent topic: Setting Up the Projector 32
  • Epson LightScene EV-110 | Users Guide - Page 33
    Related references Projector Setup Settings - Extended Menu Connecting to an HDMI Video Source If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable. The HDMI connection provides the best image quality. Note: Do not turn on the video source before
  • Epson LightScene EV-110 | Users Guide - Page 34
    output audio to Bluetooth audio devices, select On as the Bluetooth Audio setting in the projector's Settings menu. Note: Use only Bluetooth audio devices that support the SCMS-T standard. There may be a delay in the audio output to any Bluetooth audio devices. Bluetooth audio devices are not
  • Epson LightScene EV-110 | Users Guide - Page 35
    as the Bluetooth Audio setting. 6. Turn on pairing mode on the Bluetooth audio device you want to connect to. (See your Bluetooth audio device manual for details.) 7. Select Search Bluetooth Device and press Enter. 8. Select the Bluetooth audio device you want to connect to and press Enter. 9. Press
  • Epson LightScene EV-110 | Users Guide - Page 36
    alarms. Electromagnetic interference from the device may cause such equipment to malfunction and cause an accident. Note: • Connect a Bluetooth device that supports copyright protection (SCMS-T). • You may not be able to connect depending on the standard and type of device. • Even when connecting
  • Epson LightScene EV-110 | Users Guide - Page 37
    a USB cable to receive the input signal from the sensor devices. See the EV-115/EV-110 External Sensors Setup Guide at epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Caribbean) for details. Caution: Incorrect connection could damage the product. Contact a qualified
  • Epson LightScene EV-110 | Users Guide - Page 38
    Connecting to External Speakers To play the sound from your presentation, you can connect the projector to external self-powered speakers. You can control the volume using the projector's remote control. You can also connect the projector to an amplifier with speakers. Warning: Do not connect
  • Epson LightScene EV-110 | Users Guide - Page 39
    slot. Note: An SD card is required to project from a playlist created using the Epson Projector Content Manager software. Make sure you use an SDHC card of Class 10 or only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. 1.
  • Epson LightScene EV-110 | Users Guide - Page 40
    2. Insert the batteries with the + and - ends facing as shown. Warning: Make sure the batteries are inserted in the correct positions. If the batteries are not inserted correctly, they could explode or leak, causing a fire, injury, or damage to the product. 3. Replace the battery cover and press it
  • Epson LightScene EV-110 | Users Guide - Page 41
    Network Follow the instructions in these it from a software CD, if included, or download the software and manuals as necessary. Note: If your projector is connected via a LAN projector wirelessly through the access point using the Epson network software. Connecting to a Wired Network Selecting
  • Epson LightScene EV-110 | Users Guide - Page 42
    2. Connect the other end of the cable to the projector's LAN port. Parent topic: Wired Network Projection Selecting Wired Network Settings Before you can project from computers on your network, you must select the network settings for the projector using its menu system. Note: Make sure you already
  • Epson LightScene EV-110 | Users Guide - Page 43
    3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Basic menu and press Enter. 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the
  • Epson LightScene EV-110 | Users Guide - Page 44
    not to display a projector keyword on the projected image when using the Epson iProjection (Windows/Mac) software to access the projector. • Display LAN code that lets you quickly connect your iOS or Android devices using the Epson iProjection app. Note: Use the displayed keyboard to enter the name,
  • Epson LightScene EV-110 | Users Guide - Page 45
    IP Settings and turn on the DHCP setting. • If you must set addresses manually, select IP Settings, turn off DHCP, and then enter the projector's IP When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. 13. Press the LAN
  • Epson LightScene EV-110 | Users Guide - Page 46
    Related tasks Setting the Date and Time Selecting Wireless Network Settings Manually Before you can project from your wireless network, you must select the network settings for the projector using its menu system. 1. Turn on the projector. 2.
  • Epson LightScene EV-110 | Users Guide - Page 47
    projector by anyone not in the room with it. You must enter a displayed, randomized keyword from a computer using the Epson iProjection (Windows/Mac) software or the Epson iProjection app to access the projector. • Display Keyword lets you select whether or not to display a projector keyword on the
  • Epson LightScene EV-110 | Users Guide - Page 48
    code that lets you quickly connect your iOS or Android devices using the Epson iProjection app. Note: Use the displayed keyboard to enter the name, you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. After you complete the
  • Epson LightScene EV-110 | Users Guide - Page 49
    . Advanced: lets you connect to multiple devices and computers via a wireless network access point Search for available wireless network access points in Advanced connection mode Manually set the SSID (network name) of the wireless LAN system the projector is connecting to 49
  • Epson LightScene EV-110 | Users Guide - Page 50
    Setting Security Passphrase Options Open WPA2-PSK WPA3-PSK WPA2/WPA3-PSK WPA3-EAP WPA2/WPA3-EAP Various passphrases from 8 to 63 characters Description Selects the type of security used on the wireless network WPA2-PSK: uses WPA2 security with AES for encryption in Quick connection mode. Use the
  • Epson LightScene EV-110 | Users Guide - Page 51
    IP Address Subnet Mask Gateway Address On Off On Off IPv6 Auto Configuration Use Temporary Address Parent topic: Selecting Wireless Network Settings Manually Description Sets the EAP settings for WPA3EAP and WPA2/WPA3-EAP security In Quick connection mode, selects the frequency band (channel) used
  • Epson LightScene EV-110 | Users Guide - Page 52
    Selecting Wireless Network Settings in Windows Before connecting to the projector, select the correct wireless network on your computer. 1. To access your wireless utility software, access the Desktop and double-click the network icon on the Windows taskbar. 2. Do one of the following: • If your
  • Epson LightScene EV-110 | Users Guide - Page 53
    finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent and use it to connect a mobile device using the Epson iProjection app. 1. Download the latest version of the Epson iProjection app from the App Store or Google Play and
  • Epson LightScene EV-110 | Users Guide - Page 54
    3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Basic menu and press Enter. 6. Set the Display LAN Info setting to Text & QR Code. 7. Select Complete and follow the on-screen instructions to save your settings and exit the menus. 54
  • Epson LightScene EV-110 | Users Guide - Page 55
    enough so that the projected code fits into the guide of the mobile device's QR code reader. If Epson iProjection app. Parent topic: Wireless Network Projection Setting Up Projector Network E-Mail Alerts You can set up the projector to send you an e-mail alert over the network if there is a problem
  • Epson LightScene EV-110 | Users Guide - Page 56
    as the Notified IP Address setting. 11. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert. Network Projector E-mail Alert
  • Epson LightScene EV-110 | Users Guide - Page 57
    : • The email address entered as the From setting • Epson Projector on the subject line • The name of the projector experiencing a problem • The IP address of the affected projector • Detailed information about the problem Note: If a critical problem causes a projector to shut down, you may not
  • Epson LightScene EV-110 | Users Guide - Page 58
    4. Select the Notifications menu and press Enter. 5. Turn on the SNMP setting. 6. Enter up to two IP addresses to receive SNMP notifications as the Trap IP Address settings, using 0 to 255 for each address field. Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where
  • Epson LightScene EV-110 | Users Guide - Page 59
    on the Message Broadcasting setting. Administrators can broadcast messages over the network using the Epson Projector Management software. 14. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Using the
  • Epson LightScene EV-110 | Users Guide - Page 60
    in Advanced connection mode. The web setup and control features support Microsoft Internet Explorer 11.0 or later, Microsoft Edge, Google Projecting. You can also control the projector using a Web browser through the Epson iProjection (iOS/Android) app. 1. Make sure the projector is turned on.
  • Epson LightScene EV-110 | Users Guide - Page 61
    You see the Epson Web Control screen. 4. To control projection remotely, select the Remote option from the Web Control screen. Note: If you see a log in window, enter your user name and password. (The default user name is EPSONWEB and the default password is admin.) 61
  • Epson LightScene EV-110 | Users Guide - Page 62
    8 Volume button controls 5. Select the icon corresponding to the projector function you want to control. 6. To select projector menu settings, select Advanced on the Epson Web Control screen. Note: If you see a log in window, enter your user name and password. (The default user name is EPSONWEB and
  • Epson LightScene EV-110 | Users Guide - Page 63
    Select the name of the menu and follow the on-screen instructions. Parent topic: Using the Projector on a Network Related web browser. Note: You cannot use the Message Broadcasting feature in the Epson Projector Management software when you use Crestron Connected. For additional information on
  • Epson LightScene EV-110 | Users Guide - Page 64
    be detected. Note: Enabling Crestron Connected disables the Message Broadcasting feature in the Epson Projector Management software. 6. When you are finished selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. 7. Turn off the projector
  • Epson LightScene EV-110 | Users Guide - Page 65
    The following table lists the channel definitions used to control the projector in Art-Net. Channel/Function 1 Adjusting light (dimming) 2 Shutter control 3 Switch source 7 Zoom 8 Electronic focus Operation 0% to 100% Parameters 0 to 255 (default is 0) Shutter open 0 to 63 (default is 128) Non
  • Epson LightScene EV-110 | Users Guide - Page 66
    Channel/Function Operation 10 Content playback Non-operational Playlist 1 Playlist 2 Playlist 3 Playlist 4 Playlist 5 Playlist 6 Playlist 7 Playlist 8 Playlist 9 Playlist 10 Playlist 11 Playlist 12 Playlist 13 Playlist 14 Playlist 15 Parameters 0 to 3 (default is 0) 4 to 7 8 to 11 12 to 15 16 to 19
  • Epson LightScene EV-110 | Users Guide - Page 67
    Channel/Function Operation 10 Content playback Playlist 16 Playlist 17 Playlist 18 Playlist 19 Playlist 20 Playlist 21 Playlist 22 Playlist 23 Playlist 24 Playlist 25 Playlist 26 Playlist 27 Playlist 28 Playlist 29 Playlist 30 Playlist 31 Playlist 32 Playlist 33 Playlist 34 Playlist 35 Playlist 36
  • Epson LightScene EV-110 | Users Guide - Page 68
    Channel/Function Operation 10 Content playback Playlist 41 Playlist 42 Playlist 43 Playlist 44 Playlist 45 Playlist 46 Playlist 47 Playlist 48 Playlist 49 Playlist 50 Non-operational 11 Power control Power off Non-operational Power on 13 Lock Cannot control Can control Parameters
  • Epson LightScene EV-110 | Users Guide - Page 69
    Epson Web Control from your Web browser. 2. Select Developer's Menu. 3. Set the Enable API setting to On. 4. Enter one of the following Web APIs to operate the projector: URL Supported in the field. For example, a URL instructing a projector with the IP address 192.168.0.2 to playback
  • Epson LightScene EV-110 | Users Guide - Page 70
    Importing a Web Server Certificate Using the Projector Menus You can create your web server certificate and import it using the projector menus and an SD card. Note: You can also register digital certificates from your web browser. Make sure to only register once, or the certificate may not install
  • Epson LightScene EV-110 | Users Guide - Page 71
    11. Enter the password and press Enter. The certificate is imported and a completion message appears. Parent topic: Registering a Digital Certificate on the Projector Registering Digital Certificates from a Web Browser You can register the digital certificates on the projector for wireless LAN
  • Epson LightScene EV-110 | Users Guide - Page 72
    You see a screen like this: 8. Click the Browse button, select the certificate file, and click Open. 9. Enter a password in the Password box, and click Send. 10. When you finish registering the certificate, click Apply to finalize your changes and complete the registration. Parent topic: Registering
  • Epson LightScene EV-110 | Users Guide - Page 73
    Specification Format Extension Encryption Hashes Key length Password Description PKCS#12 PFX, P12 RSA MD5/SHA-1/SHA-256/SHA-384/SHA-512 512/1024/2048/4096 bit Up to 32 alphanumeric characters; required CA Certificate (PEAP/PEAP-TLS/EAP-TLS/EAP-FAST) Specification Format Extension Encryption
  • Epson LightScene EV-110 | Users Guide - Page 74
    Note: You can set a password of up to 64 characters if you use a web browser to enter the text. Parent topic: Registering a Digital Certificate on the Projector 74
  • Epson LightScene EV-110 | Users Guide - Page 75
    Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the Projector Menus Setting
  • Epson LightScene EV-110 | Users Guide - Page 76
    1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an electrical outlet. The projector's On/Standby light turns blue. This indicates that the projector is receiving power. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. Note:
  • Epson LightScene EV-110 | Users Guide - Page 77
    . 2. Press the power button again. (To leave it on, press any other button.) The laser turns off and the Status light turns off. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary). 77
  • Epson LightScene EV-110 | Users Guide - Page 78
    Caution: Do not turn the projector on immediately after turning it off. Turning the projector on and off frequently may shorten the life of the laser. 3. To transport or store the projector, make sure the Status light is off, then unplug the power cord. Note: If you use the projector continuously
  • Epson LightScene EV-110 | Users Guide - Page 79
    3. Select the Extended menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Setting the Date and Time You can set the date and time for the
  • Epson LightScene EV-110 | Users Guide - Page 80
    You see a screen like this: 5. Select the Date & Time setting and press Enter. 6. Select your date and time settings. Then select Set and press 7. When you are finished, press the Menu button to exit. Parent topic: Using Basic Projector Features Enter to confirm your changes. Image Shape You can
  • Epson LightScene EV-110 | Users Guide - Page 81
    Correcting Image Shape with H/V Keystone You can use the projector's Keystone setting to correct the shape of an image that is unevenly rectangular on the sides. Note: You cannot combine Keystone correction with other image shape correction methods. You can correct horizontal keystone distortion up
  • Epson LightScene EV-110 | Users Guide - Page 82
    3. Select the Settings menu and press Enter. Note: You can also press the Keystone button on the remote control to display the Keystone adjustment screen. 4. Select the Keystone setting and press Enter. 5. Select H/V Keystone and press Enter. Then press Enter again. 6. Use the arrow buttons on the
  • Epson LightScene EV-110 | Users Guide - Page 83
    H-Keystone 7. When you are finished, press Esc. After correction, your image is slightly smaller. Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and
  • Epson LightScene EV-110 | Users Guide - Page 84
    1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. Note: You can also display the pattern by pressing the Pattern button on the remote control. 2. Press the Menu button. 3. Select the menu and press Enter.
  • Epson LightScene EV-110 | Users Guide - Page 85
    You see the Quick Corner adjustment screen: Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a reset screen. Then select Yes. 6. Use the arrow buttons on the remote control to select the corner of the image you want to adjust. Then press Enter. 7.
  • Epson LightScene EV-110 | Users Guide - Page 86
    2. Press the Focus arrow buttons on the projector's remote control to adjust the focus. 3. Press the Esc button when finished. Parent topic: Using Basic Projector Features Zooming Into and Out of Images You can resize the image using the remote control. 1. Turn on the projector and display an image.
  • Epson LightScene EV-110 | Users Guide - Page 87
    Adjusting the Image Position You can use the Image Shift feature to adjust the image position without moving the projector. Note: This feature is not available if the digital zoom is set to the widest setting. 1. Turn on the projector and display an image. 2. Adjust the image size using the Zoom
  • Epson LightScene EV-110 | Users Guide - Page 88
    Shutting Off the Picture and Sound Temporarily You can temporarily turn off the projected picture and sound if you want to redirect your audience's attention during a presentation. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it.
  • Epson LightScene EV-110 | Users Guide - Page 89
    Make sure that you aim the remote control at the projector's receiver within the angles listed here. 1 ±60° 2 ±15° 3 23 feet (7 m) Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not
  • Epson LightScene EV-110 | Users Guide - Page 90
    3. Press the button for the source you want on the remote control. 1 HDMI source (switches to images from a connected computer or other HDMI video source) 2 Network source (switches to images from a computer or mobile device connected over a network) 3 SD card source (switches to images on an
  • Epson LightScene EV-110 | Users Guide - Page 91
    SD card. You can then insert the SD card into the projector and select the playlist you want to project. Note: See the Epson Projector Content Manager Operation Guide for information about creating playlists and exporting them to an SD card. 1. Insert an SD card containing content playlists into the
  • Epson LightScene EV-110 | Users Guide - Page 92
    2. To select a playlist, do one of the following: • Press the SD button on the projector's remote control to project the playlist on the SD card that was played last. If there is a timetable assigned, the playlist will play back according to the schedule in the timetable. 92
  • Epson LightScene EV-110 | Users Guide - Page 93
    • Press the SD Viewer button on the projector's remote control and use the arrow buttons to select a playlist from the displayed list. 93
  • Epson LightScene EV-110 | Users Guide - Page 94
    the projector's remote control using the Epson Projector Content Manager software. See the Epson Projector Content Manager Operation Guide for details. Parent topic: Using Basic Projector Features Related references Additional Projector Software and Manuals Overlay Effects and Shape Filters You can
  • Epson LightScene EV-110 | Users Guide - Page 95
    Selecting a Shape Effect You can select a standard or customized shape effect filter and apply it to the spotlight or playlist. 1. Press the Effect button on the projector's remote control. You see this screen: 2. Set the Overlay Effect setting to On. 3. Select Shape Filter and press Enter. You see
  • Epson LightScene EV-110 | Users Guide - Page 96
    Note: The standard shape effect filters are Circle 1 to Circle 3 and Rectangle 1 to Rectangle 3. You can also create custom shapes using the Epson Projector Content Manager software. 5. To apply a filter to the effect, select Filter Effect, press Enter, select a filter effect option, and press Menu
  • Epson LightScene EV-110 | Users Guide - Page 97
    2. Set the Overlay Effect setting to On. 3. Select Color Filter and press Enter. You see this screen: 4. Select Color Filter, press Enter, and use the left and right arrow buttons to select a color for the overlay effect. Press Menu to exit. 5. To assign a color that is not available in the Color
  • Epson LightScene EV-110 | Users Guide - Page 98
    You see this screen: 2. Set the Overlay Effect setting to On. 3. Select Lightness and press Enter. 4. Use the left and right arrow buttons to lighten or darken the effect. 5. Press Menu to exit. Parent topic: Overlay Effects and Shape Filters Projection Modes Depending on how you positioned the
  • Epson LightScene EV-110 | Users Guide - Page 99
    Changing the Projection Mode Using the Remote Control You can change the projection mode to flip the image over top-to-bottom. 1. Turn on the projector and display an image. 2. Hold down the A/V Mute button on the remote control for 5 to 10 seconds. The image disappears briefly and reappears flipped
  • Epson LightScene EV-110 | Users Guide - Page 100
    3. Select the Extended menu and press Enter. 4. Select the Projection setting and press Enter. 5. Select a projection mode and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Projection Modes Related references Projector Setup Settings - Extended Menu Turning On Dynamic Contrast
  • Epson LightScene EV-110 | Users Guide - Page 101
    3. Select the Image menu and press Enter. 4. Select the Dynamic Contrast setting, choose one of the following options, and press • Normal to adjust brightness at the standard speed. • High Speed to adjust brightness as soon as the scene changes. 5. Press Menu or Esc to exit the menus. Parent topic:
  • Epson LightScene EV-110 | Users Guide - Page 102
    Related references Image Quality Settings - Image Menu Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it. Note: For HDMI sources, the input signal determines the image's aspect ratio. 1. Turn on the projector and switch to the image source you want
  • Epson LightScene EV-110 | Users Guide - Page 103
    Available Image Aspect Ratios You can select the following image aspect ratios, depending on the input signal from your image source. Aspect ratio setting Auto 16:9 Full Zoom Native Description Automatically sets the aspect ratio according to the input signal. Converts the aspect ratio of the
  • Epson LightScene EV-110 | Users Guide - Page 104
    3. Press the Menu button on the remote control. 4. Select the Image menu and press Enter. 5. Select Color Mode and press Enter. 6. Press the arrow buttons to select a color mode setting and press 7. When you are finished, press Menu or Esc. Parent topic: Color Mode Related references Image Quality
  • Epson LightScene EV-110 | Users Guide - Page 105
    Controlling the Volume with the Volume Buttons The volume buttons control any external speakers you connected to the projector. You can also control the volume for Bluetooth audio devices connected to the projector. You must adjust the volume separately for each connected input source. Warning: Do
  • Epson LightScene EV-110 | Users Guide - Page 106
    Using Multiple Projectors You can combine the projected images from two or more projectors to create one large image. Follow the instructions in these sections to set up and project from multiple projectors. Projector Identification System for Multiple Projector Control Adjusting the Projector
  • Epson LightScene EV-110 | Users Guide - Page 107
    Setting the Remote Control ID Parent topic: Using Multiple Projectors Setting the Projector ID If you want to control multiple projectors from a remote control, give each projector a unique ID. 1. Press the Menu button. 2. Select the Extended menu and press Enter. 3. Select the Multi-Projection menu
  • Epson LightScene EV-110 | Users Guide - Page 108
    Note: You must set the remote control ID to match the projector ID each time you turn on the projector you have set it to control. 1. Turn on the projector you want the remote control to operate with exclusively. 2. Aim the remote control at that projector and press the ID button on the remote
  • Epson LightScene EV-110 | Users Guide - Page 109
    2. Press the Menu button. 3. Select the Settings menu and press Enter. 4. Select Brightness Settings and press Enter. 5. Select the Light Source Mode setting and press Enter. Note: You may need to turn off Multi-Projection (Multi-Projection > Off) in order to see the Light Source Mode setting
  • Epson LightScene EV-110 | Users Guide - Page 110
    setting and press Enter. 3. Select the Color Uniformity setting and press Enter. 4. Select On as the Color Uniformity setting and press Enter, then press Esc. 110
  • Epson LightScene EV-110 | Users Guide - Page 111
    5. Select Adjustment Level and press Enter. 6. Select an adjustment level and press Esc. 7. Select Start Adjustments and press Enter. 8. Select the area you want to adjust and press Enter. 9. Select Red, Green, or Blue and press the left arrow button to weaken the color tone or the right arrow
  • Epson LightScene EV-110 | Users Guide - Page 112
    Select the Multi-Projection setting and press Enter. 4. Select the Edge Blending setting and press Enter. 5. Turn on the Edge Blending, Line Guide, and Pattern Guide settings. 6. Select the edge you want to blend on each projector and press Enter. You see a screen like this: 7. Select the Blending
  • Epson LightScene EV-110 | Users Guide - Page 113
    Blend Curve setting and select a gradient for the shaded area on the projectors. 12. When the edges are blended, turn off the Line Guide and Pattern Guide settings on each projector to check the final settings. 13. When you are finished, press the Menu button. Parent topic: Using Multiple Projectors
  • Epson LightScene EV-110 | Users Guide - Page 114
    2. Select the Extended menu and press Enter. 3. Select the Multi-Projection setting and press 4. Select the Color Matching setting and press You see this screen: Enter. Enter. 5. Press the left or right arrow buttons to select a value for the Adjustment Level setting. Note: There are several
  • Epson LightScene EV-110 | Users Guide - Page 115
    Scaling an Image You can project the same image from multiple projectors and use the Scale feature to crop and combine them into one large image. 1. Press the Menu button. 2. Select the Extended menu and press Enter. 3. Select the Multi-Projection setting and press Enter. 4. Select the Scale setting
  • Epson LightScene EV-110 | Users Guide - Page 116
    5. Set the Scale setting to On. 6. Select the Scale Mode setting and select one of these options: • Zoom Display to maintain the image aspect ratio as you scale the image • Full Display to adjust the image to the projector's screen size as you scale the image 7. Use the arrow buttons to adjust each
  • Epson LightScene EV-110 | Users Guide - Page 117
    can create playlists and set timetables for them using the Epson Projector Content Manager software. See the Epson Projector Content Manager Operation Guide for details. You can also create playlists using Epson Creative Projection, Epson iProjection (Android/iOS), or a Web browser. Make sure the
  • Epson LightScene EV-110 | Users Guide - Page 118
    1. Insert an SD card containing playlists into each projector's SD card slot. 2. Press the SD button on the remote control for each projector. Synchronized playback starts at the time specified in the playlist timetables. Parent topic: Using Multiple Projectors Related concepts Wireless Network
  • Epson LightScene EV-110 | Users Guide - Page 119
    2. Press the Pattern button on the remote control. 3. Press the left and right arrow buttons on the remote control to select a pattern from the displayed list. 4. Press Esc to clear the test pattern. Parent topic: Adjusting Projector Features Selecting a Test Pattern Using the Menus You can display
  • Epson LightScene EV-110 | Users Guide - Page 120
    4. Select a test pattern and press Enter. 5. Press Menu or Esc to exit the menus. Parent topic: Adjusting Projector Features Related references Projector Feature Settings - Settings Menu Scheduling Projector Events You can save a projector command, such as turning the projector on or off or
  • Epson LightScene EV-110 | Users Guide - Page 121
    9. To schedule more events, repeat the previous steps as necessary. 10. Select Setup complete and select Yes to save your changes. Parent topic: Scheduling Projector Events Viewing Scheduled Events You can view your scheduled events on the calendar displayed on the Schedule Settings screen. 1. Press
  • Epson LightScene EV-110 | Users Guide - Page 122
    Parent topic: Scheduling Projector Events Editing a Scheduled Event You can edit any currently scheduled event. 1. Press the Menu button. 2. Select the Extended menu and press Enter. 3. Select the Schedule Settings setting and press You see a screen like this: Enter. 4. Press the left or right
  • Epson LightScene EV-110 | Users Guide - Page 123
    Projector Security You can secure your projector to deter theft or prevent unintended use. You can set up passwords to prevent the projector from being turned on, and prevent changes to the startup screen and other settings. Password Security Types Parent topic: Adjusting Projector Features Password
  • Epson LightScene EV-110 | Users Guide - Page 124
    1. Hold down the Effect button on the remote control for about five seconds or until you see this menu. 2. Press the down arrow to select Password and press Enter. You see the prompt "Change the password?". 3. Select Yes and press Enter. 4. Press the number buttons to set a four-digit password. The
  • Epson LightScene EV-110 | Users Guide - Page 125
    Selecting Password Security Types After setting a password, you see this menu, allowing you to select the password security types you want to use. If you do not see this menu, hold down the Effect button on the remote control for about five seconds or until the menu appears. • To prevent
  • Epson LightScene EV-110 | Users Guide - Page 126
    correct password to proceed. • If you have forgotten the password, make note of the Request Code: xxxxx number that appears on the screen and contact Epson Support. 126
  • Epson LightScene EV-110 | Users Guide - Page 127
    an incorrect password 30 times in succession, the projector displays a request code and a message to contact Epson Support. Do not attempt to enter the password again. When you contact Epson Support, provide the displayed request code and proof of ownership for assistance in unlocking the projector
  • Epson LightScene EV-110 | Users Guide - Page 128
    2. Press the Menu button, select the Extended menu, and press Enter. 3. Select the User's Logo setting and press Enter. 4. Select Yes and press Enter. You see a selection box overlaying your image. Note: When you select User's Logo, adjustments such as Keystone or Aspect are temporarily canceled. 5.
  • Epson LightScene EV-110 | Users Guide - Page 129
    You see the User's Logo zoom factor menu. 7. Select a zoom percentage and press Enter. You see a prompt asking if you want to save the image as the User's Logo. 8. Select Yes and press Enter. You see a completion message. 9. Press Esc to exit the message screen. 10. Select the Extended menu and
  • Epson LightScene EV-110 | Users Guide - Page 130
    Mute • Start Playlist/Stop Playlist • Source Select • Light Source Mode: Normal/Light Source Mode: Quiet See the EV-115/EV-110 External Sensors Setup Guide for details. Caution: Incorrect connection could damage the product. Contact a qualified technician to connect the external sensor device. Note
  • Epson LightScene EV-110 | Users Guide - Page 131
    the projector will transfer to the other projector. Caution: If the copy process fails due to a power failure, communication error, or for any other reason, Epson will not be responsible for any repair costs incurred. 131
  • Epson LightScene EV-110 | Users Guide - Page 132
    Operation Guide for instructions. You can download the latest software and documentation from the Epson website. Saving Settings to an SD Card Transferring Settings from an SD Card Parent topic: Adjusting Projector Features Related references Additional Projector Software and Manuals Saving
  • Epson LightScene EV-110 | Users Guide - Page 133
    2. Insert the SD card into the projector's card slot. Note: Insert the SD card directly into the projector. Do not use a hub or your settings may not be saved correctly. 3. Press and hold the Esc button on the remote control as you connect the power cord to the projector's power inlet. 4. When the
  • Epson LightScene EV-110 | Users Guide - Page 134
    Transferring Settings from an SD Card After saving projector settings to an SD card, you can transfer them to another projector of the same model. Note: Make sure the SD card contains only one settings transfer file from another projector of the same model. The settings are contained in a file
  • Epson LightScene EV-110 | Users Guide - Page 135
    4. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release the Menu button. The lights flash as settings transfer to the SD card. When the lights stop flashing, the On/Standby light turns blue and the projector enters standby mode. Caution: Do not unplug the
  • Epson LightScene EV-110 | Users Guide - Page 136
    Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Using the Displayed Keyboard Image Quality Settings - Image
  • Epson LightScene EV-110 | Users Guide - Page 137
    You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the
  • Epson LightScene EV-110 | Users Guide - Page 138
    1. Use the arrow buttons on the remote control to highlight the number or character you want to enter and press Enter. Note: Each time you select the CAPS key, the characters change between upper case and lower case. Each time you select the SYM1/2 key, the symbols enclosed by the frame change. 2.
  • Epson LightScene EV-110 | Users Guide - Page 139
    Parent topic: Using the Displayed Keyboard Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input
  • Epson LightScene EV-110 | Users Guide - Page 140
    Setting Sharpness White Balance Advanced Dynamic Contrast Options Varying levels available Color Temp. Custom Gamma Off Normal High Speed Description Adjusts the sharpness or softness of image details Sets the overall color tone of the image Color Temp.: sets the color temperature according to the
  • Epson LightScene EV-110 | Users Guide - Page 141
    Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source. To change settings for an input source,
  • Epson LightScene EV-110 | Users Guide - Page 142
    Setting Advanced Options HDMI Video Range Scale Varying levels available Reset - Parent topic: Adjusting the Menu Settings Related references Available Image Aspect Ratios Description Sets the video range to match the setting of the device connected to the HDMI input port • Auto: detects the
  • Epson LightScene EV-110 | Users Guide - Page 143
    Options H/V Keystone Quick Corner Varying levels available Description Adjusts image shape to rectangular (horizontally and vertically) H/V Keystone: lets you manually correct horizontal and vertical sides Quick Corner: select to correct image shape and alignment using an on-screen display Adjusts
  • Epson LightScene EV-110 | Users Guide - Page 144
    Setting Bluetooth Brightness Settings Options Search Bluetooth Device Bluetooth Audio Connected Device Light Source Mode Brightness Level Description Selects various Bluetooth settings Search Bluetooth Device: searches for available Bluetooth audio devices and lists them Bluetooth Audio: enables
  • Epson LightScene EV-110 | Users Guide - Page 145
    Setting Remote Receiver User Button Test Pattern Content Playback Options On Off Light Source Mode Multi-Projection Info Display the QR Code Messages Brightness Level - Overlay Effect SD Viewer Description Turns off reception of remote control signals by the receiver To reset this setting to On,
  • Epson LightScene EV-110 | Users Guide - Page 146
    Setting Reset Options - Description Resets all the adjustment values back to their default, except the User Button function Parent topic: Adjusting the Menu Settings Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that
  • Epson LightScene EV-110 | Users Guide - Page 147
    Setting Display User's Logo Projection Options Messages Display Background Startup Screen Standby Confirmation Color Uniformity - Front Front/Ceiling Rear Rear/Ceiling Description Selects various message display options Messages: controls whether messages, such as projector ID, no signal, warnings
  • Epson LightScene EV-110 | Users Guide - Page 148
    Setting Operation Options Direct Power On High Altitude Mode Auto Power On Indicators Startup Source HDMI EQ Setting Advanced Date & Time Description Selects various operation options Direct Power On: lets you turn on the projector without pressing the power button by plugging in to ac outlet High
  • Epson LightScene EV-110 | Users Guide - Page 149
    Setting Standby Mode Options Standby Mode Port DC Out (2.0A)/GPI In Settings DC Out (2.0A)/GPI In Description Selects the following when the projector is in standby mode (turned off): Standby Mode: Communication On indicates that the projector can be monitored and controlled over a network when
  • Epson LightScene EV-110 | Users Guide - Page 150
    Setting DC Out (2.0A)/GPI In Settings (continued) Options GPI-1 Settings GPI-2 Settings GPI Info. Description GPI-1 Settings/GPI-2 Settings: set the operation to be executed when the sensor signal exceeds or falls below a certain voltage. Select the Low -> High setting to select the operation for
  • Epson LightScene EV-110 | Users Guide - Page 151
    Setting Multi-Projection Schedule Settings Language Options Multi-Projection Projector ID Color Mode Color Uniformity Edge Blending Scale Brightness Settings Color Matching Reset Schedule Schedule Reset Setup Complete Various languages available Description Selects the following when you use
  • Epson LightScene EV-110 | Users Guide - Page 152
    Setting Reset Options - Description Resets all adjustment values on the Extended menu to their default settings Note: You cannot reset the following settings using the Reset option in the Extended menu: • Color Uniformity • User's Logo • Projection • High Altitude Mode • HDMI EQ Setting • Date &
  • Epson LightScene EV-110 | Users Guide - Page 153
    Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network. Setting Wireless LAN Power Options On Off Description Enables or disables wireless communication 153
  • Epson LightScene EV-110 | Users Guide - Page 154
    ) IPv6 Address (Auto) Projector Name DHCP IP Address Subnet Mask Gateway Address MAC Address IPv6 Address (Manual) IPv6 Address (Auto) - Network Configuration Accesses additional network menus Parent topic: Adjusting the Menu Settings Description Displays wireless network status and details
  • Epson LightScene EV-110 | Users Guide - Page 155
    source Displays the resolution of the current input source Displays the refresh rate of the current input source Displays information that may be needed by a service technician 155
  • Epson LightScene EV-110 | Users Guide - Page 156
    item Status Serial Number Event ID Description Displays information about projector problems that may be needed by a service technician Displays the projector's serial number Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes Event ID Code
  • Epson LightScene EV-110 | Users Guide - Page 157
    Network menus. A communication error has occurred. Try restarting the network software and restarting your projector. If that does not solve the problem, contact Epson for help. The EAP authentication type does not match the network. Check the wireless LAN security settings and make sure that the
  • Epson LightScene EV-110 | Users Guide - Page 158
    Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset All Config option on the Reset menu. Setting Refresh Mode Options - Description Projects a black image for a selected amount of time to maintain projector image quality;
  • Epson LightScene EV-110 | Users Guide - Page 159
    Setting Light Source Calibration Options Run Now Run Periodically Schedule Settings Last Run Description Schedules Light Source Calibration to correct the white balance of the light source Run Now: starts Light Source Calibration immediately Note: You cannot use the Run Now function within 20
  • Epson LightScene EV-110 | Users Guide - Page 160
    • Color Matching • Schedule Settings • Language • Date & Time • Network menu items (Wireless LAN Power) • Password • Operation Hours • Light Source Info Parent topic: Adjusting the Menu Settings 160
  • Epson LightScene EV-110 | Users Guide - Page 161
    Epson servicer. This projector uses a sealed laser light source which does not need servicing and cannot be replaced. Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual
  • Epson LightScene EV-110 | Users Guide - Page 162
    • To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Do not spray any liquid directly on the lens. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. Caution: Do not use
  • Epson LightScene EV-110 | Users Guide - Page 163
    two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. 163
  • Epson LightScene EV-110 | Users Guide - Page 164
    1. Remove the battery cover as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3. Insert the batteries with the + and - ends facing
  • Epson LightScene EV-110 | Users Guide - Page 165
    for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector. Mark the box "Fragile." Note: Epson shall not be liable for any damages incurred during transportation. Parent topic: Maintaining and Transporting the Projector 165
  • Epson LightScene EV-110 | Users Guide - Page 166
    The lights on the projector may indicate what the problem is. • The solutions in this manual can help you solve many problems. If none of these solutions help, you can contact Epson for technical support. Parent topic: Solving Problems Related references Projector Light Status Related tasks Turning
  • Epson LightScene EV-110 | Users Guide - Page 167
    Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the tables here. 1 On/Standby light 2 Status light 3 Laser light 4 Temp (
  • Epson LightScene EV-110 | Users Guide - Page 168
    or obstructed by nearby objects. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Laser has a problem. • Make sure that the vents are not clogged with dust or obstructed by nearby objects. • If the
  • Epson LightScene EV-110 | Users Guide - Page 169
    . Note: If the lights display a pattern not listed in the tables above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems Related references Projector Setup Settings - Extended Menu Where to Get Help (U.S. and Canada) Where to Get Help (Latin America
  • Epson LightScene EV-110 | Users Guide - Page 170
    problems with projected images or sound. Solutions When No Image Appears Solutions When "No Signal" Message Appears Solutions When "Not Supported in the projector. Contact Epson for help. • Press the Menu button. If the projector menu displays, there may be a problem with the connected video source
  • Epson LightScene EV-110 | Users Guide - Page 171
    videos that you play back on a computer. For details, see the manual supplied with your computer. • If you are projecting from the SD card a different video cable. • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu. Displaying
  • Epson LightScene EV-110 | Users Guide - Page 172
    HDMI Video and Audio Inserting an SD Card Related topics Solving Image or Sound Problems Displaying From a PC Laptop If you see the "No Signal" message when desktop mode is disabled. (See your computer or Windows manual for instructions.) 3. If necessary, check your video card settings and set
  • Epson LightScene EV-110 | Users Guide - Page 173
    If the "Not Supported" message appears, try as necessary. Parent topic: Solving Image or Sound Problems Related references Input Signal Settings - Signal Menu Solutions the resolution within the projector's limits. (See your computer manual for details.) • Check the resolution assigned to your
  • Epson LightScene EV-110 | Users Guide - Page 174
    type on the SD card is supported. • Make sure you use SDHC cards of Class 10 or higher with a maximum of 32 GB or SD cards in FAT16 or FAT32 format. Note: See the Epson Projector Content Manager Operation Guide for details. Parent topic: Solving Image or Sound Problems Related tasks Inserting an SD
  • Epson LightScene EV-110 | Users Guide - Page 175
    topic: Solving Image or Sound Problems Related references Input Signal Settings - Signal Menu Supported Video Display Formats Related tasks Connecting projector to your projection surface meets the specifications in the Installation Guide included with your mount. • Position the projector so the
  • Epson LightScene EV-110 | Users Guide - Page 176
    between the projectors. Parent topic: Solving Image or Sound Problems Related references Image Quality Settings - Image Menu Input Signal Settings Connecting to an HDMI Video Source Inserting an SD Card Solutions to Sound Problems If there is no sound from the external speaker when you expect it
  • Epson LightScene EV-110 | Users Guide - Page 177
    's volume (when using Epson iProjection [Windows/Mac]). • HDMI audio is only supported using PCM. Make sure Problems Related tasks Shutting Off the Picture and Sound Temporarily Solving Bluetooth Audio Problems another device. See your bluetooth device's guide for information about how to reset and
  • Epson LightScene EV-110 | Users Guide - Page 178
    Problems Solutions to Remote Control Problems Solutions When a Battery Message Appears Solutions to Password Problems Parent topic: Solving Problems Solutions to Projector Power or Shut-Off Problems that doesn't work, disconnect the cord and contact Epson. • The cooling fans may run in standby status
  • Epson LightScene EV-110 | Users Guide - Page 179
    all projectors. • If you lose the remote control, you can purchase another from an authorized Epson reseller. Parent topic: Solving Projector or Remote Control Operation Problems Related references Projector Feature Settings - Settings Menu Remote Control Operation Related tasks Replacing the Remote
  • Epson LightScene EV-110 | Users Guide - Page 180
    Problems If you cannot enter or remember a password, try the following solutions: • You may have turned on password protection without first setting a password. Try entering 0000 using the remote control. If you lose the remote control, you cannot enter a password. Order a new one from Epson Epson
  • Epson LightScene EV-110 | Users Guide - Page 181
    your Web browser is set up to connect via a proxy server, the Epson Web Control screen cannot be displayed. Make settings for a connection without using and password are case sensitive. Parent topic: Solving Network Problems Related references Projector Network Settings - Network Menu Solutions When
  • Epson LightScene EV-110 | Users Guide - Page 182
    card of Class 10 or higher with a maximum capacity of 32GB, or an SD card formatted in FAT16 or FAT32. Parent topic: Solving Network Problems Related tasks Controlling a Networked Projector Using a Web Browser Inserting an SD Card Solutions When Network Alert E-Mails are Not Received If you do not
  • Epson LightScene EV-110 | Users Guide - Page 183
    See the EV-115/EV-110 External Sensors Setup Guide for details. • Check that the cable or lead connecting the external sensor device is not damaged. • Make sure you are using the external sensor device as instructed in the manual supplied with the device. Parent topic: Solving Network Problems Where
  • Epson LightScene EV-110 | Users Guide - Page 184
    Epson for technical support services, use the following support options. Internet Support Visit Epson's support website at latin.epson.com/support and select your product for solutions to common problems with your projector. You can download utilities and documentation, get FAQs and troubleshooting
  • Epson LightScene EV-110 | Users Guide - Page 185
    Country Argentina Bolivia* Brazil Chile Colombia Costa Rica Dominican Republic* Ecuador* El Salvador* Guatemala* Mexico Nicaragua* Panama* Paraguay Peru Uruguay Venezuela Telephone (54 11) 5167-0300 0800-288-37766 800-100-116 State capitals and metropolitan areas: 3004-6627 Other areas: 0800-377-
  • Epson LightScene EV-110 | Users Guide - Page 186
    Purchase Supplies and Accessories You can purchase optional accessories and replacement parts from an Epson authorized reseller. To find the nearest reseller, go to latin.epson.com. Or you can contact your nearest sales office as described in "Where to Get Help." Parent topic: Solving Problems 186
  • Epson LightScene EV-110 | Users Guide - Page 187
    Specifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specifications Projector Safety and Approvals Specifications Supported Video Display Formats General Projector Specifications Type of display Resolution Lens Color reproduction Brightness
  • Epson LightScene EV-110 | Users Guide - Page 188
    Projection methods Ceiling-mounted, wall-mounted, table-mounted, floor-mounted, lighting track Optical aspect ratio 16:10 (width-to-height) Focus adjustment Powered Zoom adjustment Powered Zoom ratio 1 to 2.21 (Tele-to-Wide) Noise level 34 dB (Normal Light Source Mode) 22 dB (Quiet
  • Epson LightScene EV-110 | Users Guide - Page 189
    Wavelength Light source life 449 to 461 nm Normal or Quiet Light Source mode: Up to about 20000 hours Extended Light Source mode: Up to about 30000 hours Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary depending upon mode selected,
  • Epson LightScene EV-110 | Users Guide - Page 190
    Depth Weight Projection unit: (excluding feet) 10.2 inches (260 mm) Power supply unit: 4.3 inches (110 mm) 11.0 lb (4.9 kg) Parent topic: Technical Specifications Projector Electrical Specifications Rated frequency Power supply Power consumption (100 to 120 V) Power consumption (220 to 240 V)
  • Epson LightScene EV-110 | Users Guide - Page 191
    (cTUVus Mark) Notice for Argentina Wireless Module Model: WLU5630B-D101 (RoHS) Brand: EPSON CONTIENE RAMATEL ID: C-23113 Notice for Mexico Operation is subject to the following two device. Product Model: HA22A (LightScene EV-110/LightScene EV-115)] Wireless Module Model: WLU5630B-D101 (RoHS) 191
  • Epson LightScene EV-110 | Users Guide - Page 192
    -Ken 392-8502, Japan Brand: EPSON Product Model: LightScene EV-110/LightScene EV-115 (HA22A)] This product uses the following wireless module: Wireless Module Model: WLU5630B-D101 (RoHS) FCC ID: BKMAE-WLU5630 Parent topic: Technical Specifications Supported Video Display Formats For best results
  • Epson LightScene EV-110 | Users Guide - Page 193
    Display format VGA SVGA XGA WXGA WXGA+ WXGA++ SXGA SXGA+ WSXGA+ UXGA 1920 × 1080 WUXGA (Reduced Blanking)* HDMI input signals SDTV (480i/480p) SDTV (576i/576p) HDTV (720p) HDTV (1080i) HDTV (1080p) Refresh rate (in Hz) 60 60 60 60 60 60 60 60 60 60 60 60 50/60 60 Resolution (in pixels) 640 × 480
  • Epson LightScene EV-110 | Users Guide - Page 194
    Laser Safety Information Important Safety Instructions List of Safety Symbols Trademarks Copyright Notice Recycling (U.S. and Canada) Epson offers a recycling program for end of life User's Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
  • Epson LightScene EV-110 | Users Guide - Page 195
    power and unplug the projector immediately. Continuing to use the projector could result in an electric shock, fire, or visual impairment. Contact Epson support. • Do not open the projector case or attempt to disassemble or modify the projector. The projector contains a high-power laser component
  • Epson LightScene EV-110 | Users Guide - Page 196
    Labels are attached to the projector to indicate it is a Class 1 laser product and complies with FDA performance standards for laser products except for conformance as a Risk Group 2 LIP as defined in IEC 62471-5: Ed. 1.0. For more information see Laser Notice No. 57, dated May 8, 2019: • Inside •
  • Epson LightScene EV-110 | Users Guide - Page 197
    As with any bright source, do not stare into the beam, RG2 IEC/EN 62471-5:2015. Parent topic: Notices Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes.
  • Epson LightScene EV-110 | Users Guide - Page 198
    fire or electric shock. • Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: if it does not operate normally when you follow the operating instructions, or exhibits a distinct change in performance; if smoke, strange odors, or
  • Epson LightScene EV-110 | Users Guide - Page 199
    • Do not use or store the projector where it may be exposed to smoke, steam, corrosive gases, excessive dust, vibration, or shock. • Do not use the projector where flammable or explosive gases may be present. • Do not use or store the projector or remote control in a hot location, such as near a
  • Epson LightScene EV-110 | Users Guide - Page 200
    Except as specifically explained in this manual, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or suitability after a full evaluation. Parent topic: Important Safety Instructions List of Safety Symbols The following table lists the meaning of
  • Epson LightScene EV-110 | Users Guide - Page 201
    No. Symbol 3 4 5 6 7 8 9 Approved Standards IEC60417 No.5009 ISO7000 No.0434B, IEC3864-B3.1 IEC60417 No.5041 IEC60417 No.6042 ISO3864-B3.6 IEC60417 No.5957 Description Stand-by To identify the switch or switch position by means of which part of the equipment is switched on in order to bring it
  • Epson LightScene EV-110 | Users Guide - Page 202
    No. Symbol 10 11 12 13 14 15 16 Approved Standards IEC60417 No.5001B IEC60417 No.5002 - IEC60417 No.5019 IEC60417 No.5017 IEC60417 No.5032 IEC60417 No.5031 Description Battery, general On battery powered equipment. To identify a device for instance a cover for the battery compartment, or the
  • Epson LightScene EV-110 | Users Guide - Page 203
    No. Symbol 17 18 19 20 21 22 23 24 Approved Standards IEC60417 No.5172 ISO 3864 ISO 3864 - Description Class II equipment To identify equipment meeting the safety requirements specified for Class II equipment according to IEC 61140. General prohibition To identify actions or operations that are
  • Epson LightScene EV-110 | Users Guide - Page 204
    . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Epson LightScene EV-110 | Users Guide - Page 205
    terms of this Section 1 shall apply to all Disputes between you and Epson. The term "Dispute" is meant to have the broadest meaning permissible misuse, or (d) trade secret misappropriation (an "IP Claim"). You and Epson also agree, notwithstanding Section 1.6,that a court, not an arbitrator, may
  • Epson LightScene EV-110 | Users Guide - Page 206
    if your address changes by emailing us at [email protected] or writing us at the Epson Address above. Notice of the Dispute shall include the that court. 1.5 WAIVER OF CLASS ACTIONS AND CLASS ARBITRATIONS. YOU AND EPSON AGREE THAT EACH PARTY MAY BRING DISPUTES AGAINST THE OTHER PARTY ONLY IN
  • Epson LightScene EV-110 | Users Guide - Page 207
    any settlement offer made shall not be disclosed to the arbitrator until after the arbitrator determines the amount, if any, to which you or Epson is entitled. The discovery or exchange of non-privileged information relevant to the Dispute may be allowed during the arbitration. c) Arbitration Fees
  • Epson LightScene EV-110 | Users Guide - Page 208
    Off®, LightScene® and Quick Corner® are registered trademarks, Epson iProjectionTM is a trademark, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine® is a registered trademark; SizeWiseTM is a trademark; and Epson StoreSM and Extra CareSM are service marks
  • Epson LightScene EV-110 | Users Guide - Page 209
    macOS, and OS X are trademarks, and App StoreSM is a service mark of Apple Inc., registered in the U.S. and other countries strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the
  • Epson LightScene EV-110 | Users Guide - Page 210
    encourages each user to be responsible and respectful of the copyright laws when using any Epson product. While some countries' laws permit limited copying or reuse of copyrighted material in certain circumstances, those circumstances may not be as broad as some
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
LightScene EV-110/115 User's Guide