Epson LS500B Users Guide

Epson LS500B Manual

Get Epson LS500B PDF manuals and user guides View all Epson LS500B manuals
Add to My Manuals
Save this manual to your list of manuals

Epson LS500B manual content summary:

  • Epson LS500B | Users Guide - Page 1
    LS500W/LS500B/LS500WATV/ LS500BATV User's Guide
  • Epson LS500B | Users Guide - Page 2
  • Epson LS500B | Users Guide - Page 3
    Contents LS500W/LS500B/LS500WATV/LS500BATV User's Guide 9 Introduction to Your Projector ...10 Projector Features...10 Documentation 14 Where to Go for Additional Information 14 Additional Projector Software and Manuals 14 Projector Part Locations ...15 Projector Parts - Front/Top ...16 Projector
  • Epson LS500B | Users Guide - Page 4
    Network Projection ...44 Installing the Wireless LAN Module 45 Connecting Directly to a Smartphone or Tablet 45 Selecting Wireless Network Settings Manually 47 Wireless LAN Menu Settings ...50 Selecting Wireless Network Settings in Windows 51 Selecting Wireless Network Settings on Mac 51
  • Epson LS500B | Users Guide - Page 5
    Turning On Automatic Luminance Adjustment 76 Adjusting Gamma...77 Controlling the Volume with the Volume Buttons 78 Adjusting Projector Features ...80 Operating Connected Devices Using the HDMI Link Features 80 Shutting Off the Picture and Sound Temporarily 81 Projector Security Features...82
  • Epson LS500B | Users Guide - Page 6
    Projector Light Status ...128 Solving Image or Sound Problems 131 Solutions When No Image Appears 131 Solutions When "No Signal" Message Appears 133 Displaying From a PC Laptop 133 Displaying From a Mac Laptop 134 Solutions When "Not Supported" Message Appears 134 Solutions When Only a Partial
  • Epson LS500B | Users Guide - Page 7
    Safety and Approvals Specifications for Latin America 151 Supported Video Display Formats...152 Notices ...154 Recycling...154 Important Safety Information ...154 Laser Safety Information ...155 Laser Light Source Warning ...157 Important Safety Instructions...157 Restriction of Use ...160 List of
  • Epson LS500B | Users Guide - Page 8
  • Epson LS500B | Users Guide - Page 9
    LS500W/LS500B/LS500WATV/LS500BATV User's Guide Welcome to the LS500W/LS500B/LS500WATV/LS500BATV User's Guide. For a printable PDF copy of this guide, click here. 9
  • Epson LS500B | Users Guide - Page 10
    Additional Projector Software and Manuals Projector Part Locations Projector Features The Home Cinema LS500W/LS500B/LS500WATV/LS500BATV projector includes stereo speaker system with audio out port for connecting external speakers • Epson's Direct Power On feature for quick and easy setup Product Box
  • Epson LS500B | Users Guide - Page 11
    with USB Micro-B connector 4 HDMI extension cable 5 Remote control batteries (2 AAA alkaline [LS500W/LS500B], 4 AAA alkaline [LS500WATV/LS500BATV]) 6 Projector remote control (LS500W/LS500B only) 7 Remote control for projector and included streaming device (LS500WATV/LS500BATV only) 8 Streaming
  • Epson LS500B | Users Guide - Page 12
    type HDMI Additional component necessary Compatible HDMI cable Available for purchase from Epson or an authorized Epson reseller. 3.5 mm stereo mini jack Note: Older Mac computers (2009 and earlier) may not support HDMI audio. Commercially available 3.5 mm audio cable compatible with your device
  • Epson LS500B | Users Guide - Page 13
    you project with confidence. For details, see the warranty brochure that came with your projector. Note: Availability varies by region. In addition, Epson offers free Extra Care Home Service. In the unlikely event of an equipment failure, you won't have to wait for your unit to be repaired. Instead
  • Epson LS500B | Users Guide - Page 14
    ) View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24 hours a day. • If you still need help after checking this manual and any other sources listed here, you can use the Epson PrivateLine Support service to get help fast (U.S. and Canada only). For details
  • Epson LS500B | Users Guide - Page 15
    , you can use the Epson PrivateLine Support service to get help fast (U.S. and Canada only). For details, see "Where to Get Help." Projector software Epson iProjection (Windows/Mac) Epson iProjection app - Manual Epson iProjection Operation Guide (Windows/Mac) Instructions are included with the
  • Epson LS500B | Users Guide - Page 16
    Projector Parts - Rear/Top Projector Parts - Connectors Projector Parts - Base Projector Parts - Control Panel Projector Parts - Remote Control Parent topic: Introduction to Your Projector Projector Parts - Front/Top 1 Front cover 2 Speakers (2 x 10 W Stereo) 16
  • Epson LS500B | Users Guide - Page 17
    3 Control panel 4 Focus lever 5 Storage space cover 6 Air intake vent (air filter) 7 Power button and light 8 Projector lights 9 Remote receiver Parent topic: Projector Part Locations Related references Projector Light Status Projector Parts - Rear/Top 1 Lens 2 Security cable attachment
  • Epson LS500B | Users Guide - Page 18
    5 Exhaust vent 6 Remote receiver Parent topic: Projector Part Locations Projector Parts - Connectors Rear 1 LAN port 2 HDMI1 port 3 HDMI2 (ARC) port 4 Service port 5 USB-A port 6 RS-232C port 7 Audio Out port 8 Cable holder (zip tie) 18
  • Epson LS500B | Users Guide - Page 19
    Front 1 HDMI3 port 2 DC Out (2.0A) power supply port Parent topic: Projector Part Locations Related concepts Projector Connections 19
  • Epson LS500B | Users Guide - Page 20
    Projector Parts - Base 1 Front adjustable feet 2 Air intake vent 3 Air intake vent 4 Exhaust vent 5 Rear foot (fixed) Parent topic: Projector Part Locations 20
  • Epson LS500B | Users Guide - Page 21
    Projector Parts - Control Panel 1 Menu button (accesses projector menu system) 2 Enter button (selects options) 3 Home button (accesses projector Home screen) 4 Volume and left/right arrow buttons 5 Source button (changes the input source) 6 Esc button (cancels/exits functions) 7
  • Epson LS500B | Users Guide - Page 22
    Projector Parts - Remote Control LS500W/B 1 Power button 22
  • Epson LS500B | Users Guide - Page 23
    2 Arrow buttons (move through on-screen options) 3 Enter button (selects options) 4 rewind, play/pause, and fast forward buttons (control connected streaming device) 5 Menu button (accesses projector menus) 6 A/V mute button (turns off picture and sound) 7 volume up and volume down buttons
  • Epson LS500B | Users Guide - Page 24
    Projector remote control 1 Power button 2 Esc button (cancels/exits function) 24
  • Epson LS500B | Users Guide - Page 25
    3 Arrow buttons (move through on-screen options) 4 Enter button (selects options) 5 Menu button (accesses projector menus) 6 volume up and volume down buttons 7 rewind, play/pause, and fast forward buttons (control connected streaming device) 8 keystone button (corrects vertical/horizontal
  • Epson LS500B | Users Guide - Page 26
    Streaming device remote control 1 Power button 2 Up/Down/Left/Right buttons 26
  • Epson LS500B | Users Guide - Page 27
    3 Enter button 4 return button (returns to the previous menu level) 5 Volume down and volume up buttons 6 YouTube button (opens the YouTube app) 7 Netflix button (opens the Netflix app) 8 Google Play button (connects to Google Play) 9 home button (displays the Android TV home screen) 10
  • Epson LS500B | Users Guide - Page 28
    Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Projector Placement You can place
  • Epson LS500B | Users Guide - Page 29
    Front Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. Do not place or install the projector vertically. Note: Do not mount the projector on a ceiling or a wall. It could fall and cause damage or injury. Parent
  • Epson LS500B | Users Guide - Page 30
    You can also use the Projection Distance Calculator here (U.S.), here (Canada), or here (Caribbean). 1 Projection distance (from image to rear of projector) 2 Distance from projector surface to base of image 3 Distance from projector surface to top of image 4 Projected image size 16:9 Aspect Ratio
  • Epson LS500B | Users Guide - Page 31
    16:9 Aspect Ratio Image or Screen Screen or image size Projection distance (1) (4) Wide to Tele 110 inches (279.4 cm) 17.9 inches (45.5 cm)* 120 inches (304.8 cm) 20.4 inches (51.9 cm)* 130 inches (330.2 cm) 23.0 inches (58.4 cm)* Offset from projector surface (2) Wide to Tele 14.1 inches (35.7
  • Epson LS500B | Users Guide - Page 32
    , the projector remote control must be paired to the included streaming device to use Android TV and video-on-demand features. Follow the on-screen instructions or see the link below. 1. Remove the front cover from the projector. 2. Remove the storage space cover. 32
  • Epson LS500B | Users Guide - Page 33
    3. Connect the HDMI extension cable to the HDMI3 port and the USB power cable to the DC Out (2.0A) port. 4. Connect the streaming device to the HDMI extension cable. 33
  • Epson LS500B | Users Guide - Page 34
    5. Connect the USB power cable to the streaming device's USB power port. 6. Fit the device securely inside the storage space by arranging the cables as shown. Note: Do not force the device into the projector; you may damage the projector and/or the device. 34
  • Epson LS500B | Users Guide - Page 35
    7. Replace the storage space cover as shown. Note: Make sure to clear the cables or the cover will not close. 8. Replace the front cover of the projector. Parent topic: Projector Connections Connecting to an HDMI Video Source If your video source has an HDMI port, you can connect it to the projector
  • Epson LS500B | Users Guide - Page 36
    Gbps transmission band, such as from a 4K 60 fps source, use a cable rated for HDMI 2.0 or higher or you may have trouble displaying an image. If you experience any trouble displaying images at 18 Gbps, change the EDID setting to Normal. 2. Connect the other end to one of the HDMI ports on
  • Epson LS500B | Users Guide - Page 37
    Gbps transmission band, such as from a 4K 60 fps source, use a cable rated for HDMI 2.0 or higher or you may have trouble displaying an image. If you experience any trouble displaying images at 18 Gbps, change the EDID setting to Normal. 2. Connect the other end to the HDMI2 (ARC) port on the
  • Epson LS500B | Users Guide - Page 38
    The remote control uses two AAA manganese or alkaline batteries that came with the projector. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. Note: Your remote may look different but the steps are the same
  • Epson LS500B | Users Guide - Page 39
    2. Insert the batteries with the + and - ends facing as shown. Warning: Make sure the batteries are inserted in the correct positions. If the batteries are not inserted correctly, they could explode or leak, causing a fire, injury, or damage to the product. 3. Replace the battery cover and slide it
  • Epson LS500B | Users Guide - Page 40
    Network Follow the instructions in these sections to set up your projector for use on a network. Note: Epson iProjection is not to install it from a software CD, if included, or download the software and manuals as necessary. Note: If your projector is connected via a LAN (Ethernet) cable
  • Epson LS500B | Users Guide - Page 41
    2. Connect the other end of the cable to the projector's LAN port. Parent topic: Wired Network Projection Selecting Wired Network Settings Before you can project from computers on your network, you must select the network settings for the projector using its menu system. Note: Make sure you already
  • Epson LS500B | Users Guide - Page 42
    3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Basic menu and press Enter. 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the
  • Epson LS500B | Users Guide - Page 43
    that lets you quickly connect your iOS or Android devices using the Epson iProjection app. Note: Use the displayed keyboard to enter the name, addresses automatically, turn on the DHCP setting. • If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet Mask, and
  • Epson LS500B | Users Guide - Page 44
    finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: software and manuals as necessary. You can use Epson iProjection to project static images and presentations over a wireless network. Note: Epson iProjection is
  • Epson LS500B | Users Guide - Page 45
    module while its indicator light is blue or flashing, or while you are projecting wirelessly. You may damage the module or lose data. Note: The Epson 802.11b/g/n wireless LAN module is not included with your projector and is optional. 1. Turn off the projector and unplug the power cord. 2. Insert
  • Epson LS500B | Users Guide - Page 46
    1. Download the latest version of the Epson iProjection app from the App Store or Google Play and install it on your smartphone or tablet. 2. Press the Menu button on the projector or
  • Epson LS500B | Users Guide - Page 47
    return to the Network Configuration menu. 10. Select Complete and follow the on-screen instructions to save your settings. 11. Select Display the QR Code and press Enter. with the Epson iProjection app. Parent topic: Wireless Network Projection Selecting Wireless Network Settings Manually Before you
  • Epson LS500B | Users Guide - Page 48
    3. Select the Network menu and press Enter. 4. Make sure the Wireless LAN Power setting is set to On. 5. Select Network Configuration and press Enter. 6. Select the Basic menu and press Enter. 48
  • Epson LS500B | Users Guide - Page 49
    code that lets you quickly connect your iOS or Android devices with the Epson iProjection app. Note: Use the displayed keyboard to enter the name, passwords you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Note: Check your
  • Epson LS500B | Users Guide - Page 50
    devices and computers via a wireless network access point In Quick connection mode, selects the frequency band (channel) used by the wireless LAN Manually set the SSID (network name) of the wireless LAN system the projector is connecting to Search for available wireless network access points in
  • Epson LS500B | Users Guide - Page 51
    Selects whether to display the IP address on the network standby screen and Home screen Parent topic: Selecting Wireless Network Settings Manually Selecting Wireless Network Settings in Windows Before connecting to the projector, select the correct wireless network on your computer. 1. To access
  • Epson LS500B | Users Guide - Page 52
    Setting Up Wireless Network Security You can set up security for your projector to use on a wireless network. Set up one of the following security options to match the settings used on your network: • WPA2-PSK • WPA/WPA2-PSK* * Available only in Advanced connection mode. 1. Press the Menu button. 2.
  • Epson LS500B | Users Guide - Page 53
    Enter. 5. Select the Security setting and press Enter. 6. Select the security setting for your network. 7. When you finished, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Wireless Network Projection 53
  • Epson LS500B | Users Guide - Page 54
    Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the Projector Menus Adjusting
  • Epson LS500B | Users Guide - Page 55
    2. Connect the power cord to the projector's power inlet. 3. Plug the power cord into an electrical outlet. The projector's On/Standby light turns blue. This indicates that the projector is receiving power. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. 4.
  • Epson LS500B | Users Guide - Page 56
    Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is especially dangerous for children and pets. If you are using the remote control to turn the projector on, make sure no one is looking into the lens or in front of the projector before turning it on.
  • Epson LS500B | Users Guide - Page 57
    panel to navigate the screen, and press Enter to select an option. 1 Selects the source you want to project 2 Displays the Connection Guide 3 Displays the projector's menus 4 Performs the actions assigned to Custom Function 1 and Custom Function 2 on the Home screen 5 Displays the brightness for
  • Epson LS500B | Users Guide - Page 58
    Parent topic: Turning On the Projector Turning Off the Projector Before turning off the projector, turn off any connected devices and shut down any computer connected to it so you can see the computer display during shutdown. Note: Turn off this product when not in use to prolong the life of the
  • Epson LS500B | Users Guide - Page 59
    3. To transport or store the projector, make sure the Status light is off, then unplug the power cord. Caution: To avoid damaging the projector or laser, never unplug the power cord when the Status light is on or flashing. 4. Attach the lens cap. Parent topic: Using Basic Projector Features Related
  • Epson LS500B | Users Guide - Page 60
    1. Turn on the projector. 2. Press the Menu button. 3. Select the Extended menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Adjusting the
  • Epson LS500B | Users Guide - Page 61
    is turned off. If you change the projector's installation position or angle, you may need to make adjustments again. 1. Turn on the projector and display an image. 2. Press the Menu button on the projector's control panel or remote control. 3. Select Settings and press Enter. 4. Select Image Shift
  • Epson LS500B | Users Guide - Page 62
    Parent topic: Using Basic Projector Features Focusing the Image 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. 2. Raise or lower the focus lever to sharpen the image. Parent topic: Using Basic Projector
  • Epson LS500B | Users Guide - Page 63
    2. Rotate the front feet to adjust any tilting or vertical distortion. If the projected image is unevenly rectangular, you need to adjust the image shape. Parent topic: Using Basic Projector Features Image Shape You can project an evenly rectangular image by placing the projector directly in front
  • Epson LS500B | Users Guide - Page 64
    1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. 2. Press the Menu button. 3. Select the Settings menu and press Enter. 4. Select the Keystone setting and press Enter. 5. Select the Quick Corner setting
  • Epson LS500B | Users Guide - Page 65
    You see the Quick Corner adjustment screen: Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a reset screen. Then select Yes. 6. Use the arrow buttons on the projector or remote control to select the corner of the image you want to adjust. Then press
  • Epson LS500B | Users Guide - Page 66
    affected by small movements. Adjust the projector's position in small increments to square up the image. If this isn't possible, use the keystone correction buttons on the projector to correct the image shape. Note: Wait 20 minutes after turning on the projector before setting the focus for maximum
  • Epson LS500B | Users Guide - Page 67
    After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape with the remote control using the H/V-Keystone settings in the projector menus. Parent topic: Image Shape Related references Projector Feature Settings - Settings
  • Epson LS500B | Users Guide - Page 68
    Parent topic: Using Basic Projector Features Related references Projector Feature Settings - Settings Menu Viewing 3D Images You can view 3D images using your projector. Viewing 3D images requires a 3D-compatible video device, a compatible HDMI cable, and a pair of compatible RF 3D glasses (not
  • Epson LS500B | Users Guide - Page 69
    3D Viewing Range When you view 3D images, make sure you are positioned within the viewing range shown here. 1 32 ft (10 m) Parent topic: Viewing 3D Images Remote Control Operation The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m) away. You can
  • Epson LS500B | Users Guide - Page 70
    Make sure that you aim the remote control at the projector's receivers within the angles listed here. 1 19.7 feet (6 m) 2 ± 30° 3 ± 55° 4 60° 5 15° 70
  • Epson LS500B | Users Guide - Page 71
    , you may want to switch from one image source to the other. Note: Your remote control may look different from the illustration below, but the instructions are the same. 1. Make sure the connected image source you want to use is turned on. 2. For video image sources, insert a DVD or other video
  • Epson LS500B | Users Guide - Page 72
    3. Do one of the following: • Press the Source button on the projector's control panel or remote control. Press the button again to cycle through the sources. • Press the Home button on the projector's control panel and select your image source. Parent topic: Using Basic Projector Features Related
  • Epson LS500B | Users Guide - Page 73
    Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios. Normally the input signal from your video source determines the image's aspect ratio. However, for certain images you can change the aspect ratio to fit your screen. Changing the Image
  • Epson LS500B | Users Guide - Page 74
    5. Select the aspect ratio you want to use for your input signal and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Image Aspect Ratio Related references Input Signal Settings - Signal Menu Available Image Aspect Ratios You can select the following image aspect ratios, depending
  • Epson LS500B | Users Guide - Page 75
    Turning On Automatic Luminance Adjustment Parent topic: Using Basic Projector Features Changing the Color Mode You can change the projector's Color Mode to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use. 2. If you are
  • Epson LS500B | Users Guide - Page 76
    Color Mode Dynamic Bright Cinema Cinema Game Description Best for video games in a bright room Best for projecting vivid images Best for movies projected in a dark room with natural tone images Best for gaming Parent topic: Color Mode Turning On Automatic Luminance Adjustment You can turn on the
  • Epson LS500B | Users Guide - Page 77
    Parent topic: Color Mode Related references Image Quality Settings - Image Menu Adjusting Gamma You can adjust the gamma to improve differences in halftone brightness that vary depending on the connected device. Note: Project a still image to adjust the gamma; you cannot adjust it properly when
  • Epson LS500B | Users Guide - Page 78
    the projector. You must adjust the volume separately for each connected input source. Note: Your remote control may differ from the illustration below, but the instructions are the same. 1. Turn on the projector and start a presentation that includes audio. 78
  • Epson LS500B | Users Guide - Page 79
    2. To lower or raise the volume, press the volume buttons on the projector's control panel or remote control. 3. To set the volume to a specific level for an input source, use the projector menus. Parent topic: Using Basic Projector Features 79
  • Epson LS500B | Users Guide - Page 80
    Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Operating Connected Devices Using the HDMI Link Features Shutting Off the Picture and Sound Temporarily Projector
  • Epson LS500B | Users Guide - Page 81
    You see this screen: Note: Linked devices are indicated in blue. 7. Select the device you want to control and project images from, and press Enter. 8. Select the following HDMI link options as necessary: • Audio Out Device: select whether to output audio from the internal speakers or a connected
  • Epson LS500B | Users Guide - Page 82
    Note: Your remote control may differ from the illustration below but the steps are still the same. 1. Press the A/V Mute button on the remote control to temporarily stop projection and mute any sound. 2. To turn the picture and sound back on, press A/V Mute again. Parent topic: Adjusting Projector
  • Epson LS500B | Users Guide - Page 83
    2. Select the Settings menu and press Enter. 3. Select the Lock Setting setting and press Enter. 4. Select one of these lock types and press Enter: • To lock the projector's power button, select Child Lock. This setting is enabled once the projector is turned off. To turn the projector on, you must
  • Epson LS500B | Users Guide - Page 84
    and secure it to a room fixture or heavy furniture. Parent topic: Projector Security Features Using Advanced Image Adjustment Features Follow the instructions in these sections to use your projector's advanced image adjustments. Creating Image Presets Adjusting Detail Enhancement Adjusting the Color
  • Epson LS500B | Users Guide - Page 85
    Adjusting the Color Tone (Color Uniformity) Parent topic: Adjusting Projector Features Creating Image Presets You can quickly optimize your projected image by selecting image adjustment settings and saving them as a preset you can reuse later. You can save the following settings in a preset: • Frame
  • Epson LS500B | Users Guide - Page 86
    3. Select the Image Enhancement setting and press Enter. 4. Select the Image Preset Mode setting and press Enter. 5. Select one of the presets and press Enter. Note: If you select a previously used preset, your new adjustments overwrite the old ones. 6. Press Esc to return to the Image Enhancement
  • Epson LS500B | Users Guide - Page 87
    Adjusting Detail Enhancement You can enhance the contrast in detailed areas of an image to create a more textured look. Note: This feature may not be available depending on the projection mode and input signal. 1. Turn on the projector and switch to the image source you want to use. 2. Press the
  • Epson LS500B | Users Guide - Page 88
    Adjusting the Color Convergence (Panel Alignment) You can use the Panel Alignment feature to manually adjust the color convergence (the alignment of the red and blue colors) in the projected image. Note: You can adjust only the red or blue
  • Epson LS500B | Users Guide - Page 89
    • B to adjust the blue color convergence. 9. Select the Pattern Color setting and press Enter. 10. Select the pattern you want to use and press Enter. 11. Select Start Adjustments and press Enter. You see this screen: 12. Select one of the following: • Select Shift the whole panel to adjust the
  • Epson LS500B | Users Guide - Page 90
    You see a screen like this: 14. Use the arrow buttons on the remote control to adjust the color alignment of the color you selected for the Select Color setting. 15. When you are finished adjusting the screen, press Enter. You see this screen: Note: The Shift the whole panel option affects the grid
  • Epson LS500B | Users Guide - Page 91
    16. Select Adjust the four corners and press Enter. (Otherwise, select Exit and press Enter.) 17. Use the arrow buttons on the remote control to adjust the color alignment in the corner of the screen highlighted by the orange box. 18. Press the Enter button to move to the next corner of the screen.
  • Epson LS500B | Users Guide - Page 92
    Features Related references Projector Setup Settings - Extended Menu Adjusting the Color Tone (Color Uniformity) You can use the Color Uniformity feature to manually adjust the color tone balance in the projected image. 1. Press the Menu button. 2. Select the Extended menu and press Enter. 3. Select
  • Epson LS500B | Users Guide - Page 93
    You see this screen: 5. Press Enter and select On. 6. Press Esc. 7. Select the Adjustment Level setting and press Enter. 8. Press the right and left arrow buttons to adjust the level, and press Esc. 9. Select the Start Adjustments setting and press Enter. 10. Select the area of the screen that you
  • Epson LS500B | Users Guide - Page 94
    11. Select the color (Red, Green, or Blue) you want to adjust, and use the left arrow button to weaken the color tone and the right arrow button to strengthen the color tone. 12. Press Esc. 13. Repeat steps 10 and 11 for each area you want to adjust. 14. Repeat steps 7 to 11 for each adjustment
  • Epson LS500B | Users Guide - Page 95
    • Save Memory: Saves your current settings to memory (10 memories with different names are available) Note: A memory name that has already been used is indicated by a blue mark. Saving over a previously saved memory overwrites the settings with your current settings. • Erase Memory: Erases the
  • Epson LS500B | Users Guide - Page 96
    Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings -
  • Epson LS500B | Users Guide - Page 97
    You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source, resolution, or other menu settings.
  • Epson LS500B | Users Guide - Page 98
    Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on other settings, the input signal, and the currently selected input source. To change settings for an input source,
  • Epson LS500B | Users Guide - Page 99
    Setting White Balance Image Enhancement Advanced Light Output Dynamic Contrast Options Color Temp. G-M Correction Custom Grayscale - Gamma RGBCMY Varying levels available Off Normal High Speed 99 Description Sets the overall color tone of the image Color Temp.: sets the color temperature according
  • Epson LS500B | Users Guide - Page 100
    Note: The Brightness setting does not affect laser brightness. To change the laser brightness mode, use the Light Output setting. Image Enhancement Options Options 4K Enhancement Image Preset Mode Frame Interpolation Deinterlacing Noise Reduction MPEG Noise Reduction Super-resolution Detail
  • Epson LS500B | Users Guide - Page 101
    Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source. To change settings for an input source,
  • Epson LS500B | Users Guide - Page 102
    Setting 3D Setup Aspect Overscan Color Space Options 3D Display 3D Format 3D Depth Diagonal Screen Size 3D Brightness Inverse 3D Glasses 3D Viewing Notice Auto Normal Full Zoom Auto Off 4% 8% Auto BT.709 BT.2020 Description 3D Display: Select Auto or 3D to enables 3D image projection 3D Format:
  • Epson LS500B | Users Guide - Page 103
    images from a computer; select if the image is too dark EDID: selects the EDID settings • Expanded: supports 3840 × 2160 60 Hz signals • Normal: supports 3840 × 2160 30 Hz signals • 21:9: supports 2560 × 1080 60 Hz signals Image Processing: improves the response speed for images projected at high
  • Epson LS500B | Users Guide - Page 104
    Corner Varying levels available 104 Description Displays an on-screen guide with instructions for installing and positioning the projector. Adjusts image shape to rectangular (horizontally and vertically) H/V-Keystone: lets you manually correct horizontal and vertical sides Quick Corner: select to
  • Epson LS500B | Users Guide - Page 105
    of projector's speaker system or external speakers Adjusts the HDMI Link options that allow the projector remote to control HDMI-connected devices that support the CEC standard Device Connections: lists the devices connected to the HDMI1, HDMI2 (ARC), and HDMI3 ports HDMI Link: enables or disables
  • Epson LS500B | Users Guide - Page 106
    Setting Lock Setting Options Child Lock Control Panel Lock Memory Load Memory Save Memory Erase Memory Rename Memory Parent topic: Adjusting the Menu Settings Description Controls projector button locking to secure the projector Child Lock: locks the power button on the projector's control
  • Epson LS500B | Users Guide - Page 107
    Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Setting Home Screen Options Home Screen Auto Disp. Custom Function 1 Custom Function 2 Description Adjusts settings on the Home Screen Home Screen
  • Epson LS500B | Users Guide - Page 108
    Setting Display Projection Options Messages Display Background Startup Screen Standby Confirmation Panel Alignment Color Uniformity Front Front/Upside Down Description Selects various display options Messages: controls whether messages are displayed on the screen Display Background: selects the
  • Epson LS500B | Users Guide - Page 109
    Setting Operation Options Direct Power On Sleep Mode Sleep Mode Timer Illumination High Altitude Mode Quick Startup USB Power in Standby Log Save Destination Description Selects various operation options Direct Power On: turns on the projector when you plug it in Sleep Mode: select On to place the
  • Epson LS500B | Users Guide - Page 110
    Setting Standby Mode Language Options Communication On Communication Off Various languages available Description Allows the projector to be monitored over a network even when turned off Selects the language for projector menu and message displays Parent topic: Adjusting the Menu Settings
  • Epson LS500B | Users Guide - Page 111
    Setting Net. Info - Wireless LAN Net. Info - Wired LAN Display the QR Code Options Connection Mode Wireless LAN system Antenna Level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Address Region Code Projector Name DHCP IP Address Subnet Mask Gateway Address MAC Address -
  • Epson LS500B | Users Guide - Page 112
    of the current input source Displays the 3D format of the input signal during 3D projection Displays image signal information that may be needed by a service technician 112
  • Epson LS500B | Users Guide - Page 113
    Displays the color depth and color difference Displays information on the Color Space and Dynamic Range Displays information about projector problems that may be needed by a service technician Displays the projector's serial number Displays the Event ID number corresponding to a specific projector
  • Epson LS500B | Users Guide - Page 114
    Event ID code 0022 0027 0028 0029 0030 0031 0035 0434 0481 0482 0485 0484 04FE 0479 04FF 0891 0892 0894 0898 Cause and solution Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again. Communication with computer was
  • Epson LS500B | Users Guide - Page 115
    solution A communication error has occurred. Try restarting the network software and restarting your projector. If that does not solve the problem, contact Epson for help. Parent topic: Projector Information Display - Info Menu Projector Reset Options - Reset Menu You can reset the Memory settings
  • Epson LS500B | Users Guide - Page 116
    • Panel Alignment • Color Uniformity • Operation Hours • Language • Network Settings Parent topic: Adjusting the Menu Settings 116
  • Epson LS500B | Users Guide - Page 117
    Epson servicer. This projector uses a sealed laser light source which does not need servicing and cannot be replaced. Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual
  • Epson LS500B | Users Guide - Page 118
    your projector and make regular maintenance simple. Filter maintenance intervals will depend on the environment. If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to
  • Epson LS500B | Users Guide - Page 119
    Damage due to the failure to properly maintain the projector or its filter may not be covered by the projector's Limited Warranty. Cleaning the Air Filter and Vents Replacing the Air Filter Parent topic: Maintaining and Transporting the Projector Cleaning the Air Filter and Vents Clean the projector
  • Epson LS500B | Users Guide - Page 120
    3. Loosen the screws securing the air filter cover and remove the air filter cover. 4. Set the projector down. 5. Pull the air filter out of the projector. 120
  • Epson LS500B | Users Guide - Page 121
    6. Tap each side of the filter 4 to 5 times to shake off any excess dust. Do this outside the room or away from the projector. Caution: Do not use excessive force when tapping the air filter, or it may crack and become unusable. Do not rinse the air filter in water, or use any detergent or solvent
  • Epson LS500B | Users Guide - Page 122
    8. Place the air filter back in the projector as shown. 9. Lift the projector on the side of the air filter, close the air filter cover, and tighten the screws. Parent topic: Air Filter and Vent Maintenance Related tasks Turning Off the Projector Replacing the Air Filter You need to replace the air
  • Epson LS500B | Users Guide - Page 123
    • The air filter is torn or damaged You can replace the air filter while the projector is placed on a table. 1. Turn off the projector and unplug the power cord. 2. Lift the projector on the side of the air filter. 3. Loosen the screws securing the air filter cover and remove the air filter cover.
  • Epson LS500B | Users Guide - Page 124
    5. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations. 6. Place the new air filter in the projector as shown. 124
  • Epson LS500B | Users Guide - Page 125
    two AAA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. Note: Your remote may look different but the steps are the same
  • Epson LS500B | Users Guide - Page 126
    2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3. Insert the batteries with the + and - ends facing as shown. Warning: Make sure the
  • Epson LS500B | Users Guide - Page 127
    for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector. Mark the box "Fragile." Note: Epson shall not be liable for any damages incurred during transportation. Parent topic: Maintaining and Transporting the Projector 127
  • Epson LS500B | Users Guide - Page 128
    : • The lights on the projector may indicate what the problem is. • The solutions in this manual can help you solve many problems. If none of these solutions help, you can contact Epson for technical support. Parent topic: Solving Problems Related references Where to Get Help (Latin America) Where
  • Epson LS500B | Users Guide - Page 129
    Note: If the Illumination setting is Off, all indicator lights are off under normal projection conditions. 1 On/Standby light 2 Status light 3 Laser light 4 Temp (temperature) light On/Standby light Blue Blue Status light Blue Flashing Blue/Off Off Flashing Off Laser light Temp light Off
  • Epson LS500B | Users Guide - Page 130
    . • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Laser warning. Turn the projector off, unplug it, and contact Epson for help. Laser has a problem. Turn the projector off, unplug it, and contact
  • Epson LS500B | Users Guide - Page 131
    contact Epson for help. Parent topic: Solving Problems Solving Image or Sound Problems Check the solutions in these sections if you have any problems with projected images or sound. Solutions When No Image Appears Solutions When "No Signal" Message Appears Solutions When "Not Supported"
  • Epson LS500B | Users Guide - Page 132
    connected streaming device or video source, and then turn them back on. • Press the Menu button. If the projector menu displays, there may be a problem with the connected video source, cable connection, or port. • Check the settings on the Signal menu to make sure they are correct for the current
  • Epson LS500B | Users Guide - Page 133
    from an HDMI source, replace the HDMI cable with a shorter one. • Try a different video cable. • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu. Displaying From a PC Laptop Displaying From a Mac Laptop Parent topic: Solving
  • Epson LS500B | Users Guide - Page 134
    is enabled and extended desktop mode is disabled. (See your computer or Windows manual for instructions.) 3. If necessary, check your video card settings and set the multiple display menu and make sure that the projector supports that resolution. Parent topic: Solving Image or Sound Problems 134
  • Epson LS500B | Users Guide - Page 135
    references Supported Video the resolution within the projector's limits. (See your computer manual for details.) • Check the resolution assigned to your presentation Reset menu. Parent topic: Solving Image or Sound Problems Related references Projector Setup Settings - Extended Menu Projector
  • Epson LS500B | Users Guide - Page 136
    to correct the image shape. Parent topic: Solving Image or Sound Problems Related concepts Projector Placement Related tasks Correcting Image Shape with Quick . • If you connected an A/V system that does not support ARC to the HDMI2 (ARC) port, the image may be distorted. Parent topic: Solving Image
  • Epson LS500B | Users Guide - Page 137
    to match the projector's native resolution, if possible. • Make sure you removed the lens cap. Parent topic: Solving Image or Sound Problems Related concepts Projector Placement Related references Image Quality Settings - Image Menu Related tasks Cleaning the Lens Focusing the Image Solutions When
  • Epson LS500B | Users Guide - Page 138
    the Reset menu. Parent topic: Solving Image or Sound Problems Related concepts Projector Placement Related references Input Signal Settings - device for more information. • Make sure you are using an HDMI cable that supports 3D signals. • Make sure you selected the correct 3D Format setting on the
  • Epson LS500B | Users Guide - Page 139
    and the 3D glasses. • If the other solutions do not solve the problem, change the Inverse 3D Glasses setting on the Signal menu. Return the setting Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port. If not, you need to connect an audio cable
  • Epson LS500B | Users Guide - Page 140
    cooling fans may run at high speed momentarily and cause an unexpected noise. This is normal. Parent topic: Solving Image or Sound Problems Related references Projector Feature Settings - Settings Menu Related tasks Controlling the Volume with the Volume Buttons Shutting Off the Picture and Sound
  • Epson LS500B | Users Guide - Page 141
    be defective. Try another power cord. If that doesn't work, disconnect the cord and contact Epson. • Disconnect the projector from the network to see if there is a network setting that another from an authorized Epson reseller. Parent topic: Solving Projector or Remote Control Operation Problems 141
  • Epson LS500B | Users Guide - Page 142
    tasks Replacing the Remote Control Batteries Solutions to HDMI Link Problems If you cannot control an HDMI device using the device. You may need to restart the device. • Connect no more than three devices that support HDMI Link at the same time. • If you have connected a speaker or receiver, set
  • Epson LS500B | Users Guide - Page 143
    expand your wireless bandwidth. • If the connection speed declines, reduce the number of connected devices. • If you are using Epson iProjection, you can try adjusting the iProjection settings. See the Epson iProjection Operation Guide for more information. Parent topic: Solving Network Problems 143
  • Epson LS500B | Users Guide - Page 144
    select your product for solutions to common problems with your projector. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661. This
  • Epson LS500B | Users Guide - Page 145
    to contact Epson for technical support services, use the following support options. Internet Support Visit Epson's support website at epson.com.jm/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or
  • Epson LS500B | Users Guide - Page 146
    apply. If your country does not appear on the list, contact the sales office in the nearest country. Purchase Supplies and Accessories Parent topic: Solving Problems 146
  • Epson LS500B | Users Guide - Page 147
    Specifications Projector Environmental Specifications Projector Safety and Approvals Specifications Safety and Approvals Specifications for Latin America Supported Video Display Formats General Projector Specifications Type of display Resolution Lens Color reproduction Brightness Poly-silicon
  • Epson LS500B | Users Guide - Page 148
    (0.43 m) to 32.3 inches (0.82 m) (in native aspect ratio) Projection methods Front Optical aspect ratio 16:9 (width-to-height) Focus adjustment Manual Zoom adjustment Digital Zoom ratio 1.0 to 1.35 (Tele-to-Wide) Internal sound system Stereo, 10 W × 2 Noise level 36 dB (Normal Light
  • Epson LS500B | Users Guide - Page 149
    Parent topic: Technical Specifications Remote Control Specifications Reception range Batteries 19.7 feet (6 m) Two alkaline or manganese AAA Parent topic: Technical Specifications Projector Dimension Specifications Height (excluding feet) Width Depth Weight 8.3 inches (209.5 mm) 18.0 inches (
  • Epson LS500B | Users Guide - Page 150
    Power consumption (220 to 240 V) Operating: Normal Power Consumption mode: 366 W ECO Power Consumption mode: 230 W Networked Standby: 2.0 W Energy Saving: 0.5 W Parent topic: Technical Specifications Projector Environmental Specifications Temperature Humidity (relative, noncondensing) Operating
  • Epson LS500B | Users Guide - Page 151
    Control S.R.L. Av. Gral. Bernardino Caballero 810 esq. Celsa Speratti, Asunción, Paraguay Notice for Peru Product Model: LS500WATV/LS500BATV, LS500W/LS500B Brand: EPSON This product uses the following Bluetooth module: Bluetooth Module Model: DBUB-E207 FCC ID: BKMAE-E207 Product Manufacturer: Seiko
  • Epson LS500B | Users Guide - Page 152
    Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically. Your computer's monitor port or video card refresh rate (vertical frequency) must be compatible with the projector. (See your computer or video card manual
  • Epson LS500B | Users Guide - Page 153
    Display format HDTV (1080i) HDTV (1080p) Refresh rate (in Hz) 50/59.94/60 50/59.94/60 23.98/24 Resolution (in pixels) 1920 × 1080 1920 × 1080 1920 × 1080 3D formats Side by Side Side by Side Frame Packing Side by Side Top and Bottom Compatible 4K HDR Signals Compatible 4K signals are converted
  • Epson LS500B | Users Guide - Page 154
    Instructions List of Safety Symbols FCC Compliance Statement Binding Arbitration and Class Waiver Trademarks Copyright Notice Recycling Epson explained in this User's Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. Warning: The projector
  • Epson LS500B | Users Guide - Page 155
    IEC/EN60825-1:2007 international standard for lasers. Follow these safety instructions when using the projector. Warning: Possibly hazardous optical radiation result in an electric shock, fire, or visual impairment. Contact Epson support. • Do not attempt to disassemble or modify the projector. The
  • Epson LS500B | Users Guide - Page 156
    Labels are attached to the projector to indicate it is a Class 3R product and complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice N. 50, dated June 24, 2007: • Inside • Top 156
  • Epson LS500B | Users Guide - Page 157
    inches (20 cm). The higher the value, the greater the hazard level. Exposure Hazard Value 0.68 Parent topic: Notices Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can
  • Epson LS500B | Users Guide - Page 158
    . Doing so may cause a malfunction. • Do not place the projector on an unstable cart, stand, or table or on a surface that is unable to support its weight. Otherwise, it could fall or topple causing an accident and injury. • When installing the projector in a high position, take measures to prevent
  • Epson LS500B | Users Guide - Page 159
    Except as specifically explained in this manual, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or servicing to qualified service personnel under the following conditions: if it does not operate normally when you follow the operating instructions,
  • Epson LS500B | Users Guide - Page 160
    related to direct medical care, please make your own judgment on this product's suitability after a full evaluation. Parent topic: Important Safety Instructions List of Safety Symbols The following table lists the meaning of the safety symbols labeled on the equipment. Symbol Approved Standards
  • Epson LS500B | Users Guide - Page 161
    Symbol Approved Standards IEC60417 No.5008 IEC60417 No.5009 ISO7000 No.0434B, IEC3864-B3.1 IEC60417 No.5041 IEC60417 No.6042 ISO3864-B3.6 IEC60417 No.5957 IEC60417 No.5926 Description "OFF" (power) To indicate disconnection from the mains. Stand-by To identify the switch or switch position by
  • Epson LS500B | Users Guide - Page 162
    Symbol Approved Standards - IEC60417 No.5001B IEC60417 No.5002 - IEC60417 No.5019 IEC60417 No.5017 IEC60417 No.5032 Description Polarity of DC power connector To identify the positive and negative connections (the polarity) on a piece of equipment to which a DC. power supply may be connected.
  • Epson LS500B | Users Guide - Page 163
    Symbol Approved Standards IEC60417 No.5031 IEC60417 No.5172 ISO 3864 ISO 3864 - - ISO3864 IEC60825-1 ISO 3864 Description Direct current To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals. Class II equipment To identify equipment
  • Epson LS500B | Users Guide - Page 164
    Symbol Approved Standards IEC60417 No. 5266 ISO3864 IEC60417 No. 5057 IEC 60417-6056 IEC 60417-6043 - ISO7010 No. W027 IEC60417 No. 5109 Parent topic: Notices Description Standby, partial standby To indicate that part of the equipment is in the ready status. Caution, movable parts To indicate
  • Epson LS500B | Users Guide - Page 165
    . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Epson LS500B | Users Guide - Page 166
    of action is for an IP Claim. 1.2 Binding Arbitration. You and Epson agree that all Disputes shall be resolved by binding arbitration according to this if your address changes by emailing us at [email protected] or writing us at the Epson Address above. Notice of the Dispute shall include the
  • Epson LS500B | Users Guide - Page 167
    MORE THAN ONE PARTY'S CLAIMS WITHOUT THE WRITTEN CONSENT OF ALL AFFECTED PARTIES TO AN ARBITRATION PROCEEDING. 1.6 Arbitration Procedure. If you or Epson commences arbitration, the arbitration shall be governed by the rules of JAMS that are in effect when the arbitration is filed, excluding any
  • Epson LS500B | Users Guide - Page 168
    of your assent to this Agreement (including without limitation the purchase, download, installation of the Software or other applicable use of Epson Hardware, products and services) that specifies (i) your name, (ii) your mailing address, and (iii) your request to be excluded from the final, binding
  • Epson LS500B | Users Guide - Page 169
    Quick Corner® are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine® is a registered trademark; SizeWiseTM is a trademark; and Epson StoreSM and Extra CareSM are service marks of Epson America, Inc. Windows is a registered trademark
  • Epson LS500B | Users Guide - Page 170
    or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
LS500W/LS500B/LS500WATV/
LS500BATV User's Guide