Epson Home Cinema 3800 Quick Setup

Quick Setup

IMPORTANT:

Before using this product, make sure you read these instructions

and the safety instructions in the online

User’s Guide

.

Note:

These illustrations show the Home Cinema 3800, but the instructions are

the same for the Home Cinema 3200 unless otherwise noted.

Connect the projector

Connect two video devices or computers simultaneously with a commercially

available HDMI cable. Use the Source buttons on the remote control or the

Home

and arrow buttons on the projector to switch between them.

HDMI cable

Note:

The DC Out (2.0A) port provides power to streaming media devices.

For more details and additional connection types, see the online

User’s Guide

.

Connect audio

External speakers

You can connect the projector to external self-powered speakers through the

Audio Out

port.

Note:

If you connect external speakers to the Home Cinema 3800, the

projector’s internal speakers are muted.

3.5 mm stereo mini cable

Bluetooth

®

devices

You can pair a Bluetooth device to the projector to output audio from a

device connected to one of the HDMI ports. See the online

User’s Guide

for

instructions.

Turn on your equipment

1

Turn on your video source or computer.

2

Plug in the projector.

3

Remove the lens cap.

4

Press the

power button on the projector or the

On

button on the

remote control. The power light flashes blue, then stays on.

Note:

To shut down the projector, press the

power button on the

projector or the

Standby

button on the remote control, then press the

button again to confirm, if necessary. Wait for the projector to cool down

before unplugging it.

5

Use the arrow buttons on the projector or remote control to highlight any

of the options that appear on the Home screen, then press

Enter

to select

it. You can switch between projection sources and quickly access various

adjustment options from this screen.

6

The default language of the menu system is English. To select another

language, press the

Menu

button on the projector or remote control.

Select

Extended

and press

Enter

. Select

Language

and press

Enter

.

Select your language and press

Enter

. Press the

Menu

button to exit the

menu system.

Adjust the image

1

If you don’t see an image, press one of the Source buttons on the remote

control or the

Home

and arrow buttons on the projector to select the

image source.

Note:

If you still see a blank screen or have other display problems,

see the troubleshooting tips on the back of this sheet.

2

For the best image quality, place the projector directly in front of the

center of the screen, facing the screen squarely. If this is not possible, turn

the horizontal and vertical lens shift dials to adjust the image position and

center it on the screen.

Home Cinema 3200/3800 Series

Section	Page
Connect the projector	1
Connect audio	1
Turn on your equipment	1
Adjust the image	1
Using the remote control	2
Viewing 3D images	2
Troubleshooting	3
Where to get help	3
Optional accessories	3

Epson Home Cinema 3800 Quick Setup

Epson Home Cinema 3800 Manual

Epson Home Cinema 3800 manual content summary: