Epson ET-7700 Start Here - Installation Guide
Epson ET-7700 Manual
 |
View all Epson ET-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson ET-7700 manual content summary:
- Epson ET-7700 | Start Here - Installation Guide - Page 1
when you are prompted to do so. For instructions on how to replace the maintenance box, see the online User's Guide. 1 Remove all protective materials from the product. 2 Unpack the ink bottle that matches the open ink tank. Hold the ink bottle upright and slowly turn the bottle cap to remove it - Epson ET-7700 | Start Here - Installation Guide - Page 2
. 13 Follow the on-screen instructions to adjust the print quality. Press the OK button to continue. Note: You can change these settings later using the product's control panel. For more information, see the online User's Guide. 14 To complete filling the ink tanks, repeat steps 1 through 6 using - Epson ET-7700 | Start Here - Installation Guide - Page 3
epson.ca/support/gcp (Canada) for instructions. 1 Make sure the product is NOT CONNECTED to your computer. Cassette 1 Cassette 2 4 Insert paper with the glossy or printable side down. Cassette 1 Cassette 2 Note: Make sure the paper is loaded against the front edge guide and photos from - Epson ET-7700 | Start Here - Installation Guide - Page 4
specifically for Epson printers. Find Genuine Epson Ink and specialty papers at www.epson.com (U.S. sales) or www.epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766). ET-7700 replacement ink bottles Color Black Cyan Magenta Yellow Photo Black Part
-
1 -
2 -
3 -
4
 |
 |
Start Here
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes:
Para
obtener instrucciones de configuración en español, consulte la
Guía
de instalación
en
www.epson.com/support/et7700sp
(requiere una
conexión a Internet).
1
Unpack
Extra maintenance box
Note:
• Do not open the ink bottles until you are ready to fill the ink tanks.
The ink bottles are vacuum packed to maintain reliability.
• The CD/DVD tray is taped to the bottom of cassette 2.
• Your product includes an extra maintenance box. Use it to replace
the installed maintenance box when you are prompted to do so. For
instructions on how to replace the maintenance box, see the online
User’s Guide
.
1
Remove all protective materials from the product.
2
Lift up the scanner unit. Remove all protective materials
from inside the product.
Caution:
Do not touch the flat white cable or the ink tubes and
their translucent cover.
2
Fill ink tanks
Note:
This product requires careful handling of ink. If ink spills, wipe it
off immediately with a damp towel to avoid permanent stains. If ink gets
on your clothes or belongings, it may not come off.
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
1
Open the ink tank cover, then open the cap for the ink tank
you are going to fill.
2
Unpack the ink bottle that matches the open ink tank.
Hold the ink bottle upright and slowly turn the bottle cap to
remove it.
Caution:
Do not shake or squeeze the ink bottle. Do not touch
the top of the ink bottle after its cap is removed; otherwise, ink
may leak.
3
Position the top of the ink bottle along the slot in front of
the filling port, then slowly stand the bottle up to insert it.
Note:
Refer to the color-coded sticker on the ink unit to identify
the color of each tank. Do not force the bottles into position; they
are keyed for each color.
4
Wait for the ink to fill the tank.
Do not squeeze the bottle.
Ink flows into the tank and stops automatically when the
ink is filled to the upper line.
Note:
If ink does not flow from the bottle, lift and reinsert the
bottle.
ET-7700