Epson ET-4760 Start Here - Installation Guide
Epson ET-4760 Manual
 |
View all Epson ET-4760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson ET-4760 manual content summary:
- Epson ET-4760 | Start Here - Installation Guide - Page 1
ET-3760/ET-4760 Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. Important Safety Instructions: When using telephone equipment, you should always follow basic safety precautions to reduce the risk of fire, - Epson ET-4760 | Start Here - Installation Guide - Page 2
. 16 Select Next and follow the on-screen instructions to reset the ink levels. 17 Follow the on-screen instructions to adjust the print quality. Press the OK button to continue. Note: • You need to load paper before you can adjust the print quality. See "Load paper" on the back of this sheet for - Epson ET-4760 | Start Here - Installation Guide - Page 3
the product software. • To print from a Chromebook™, go to www.epson.com/support/gcp (U.S.) or www.epson.ca/support/gcp (Canada) for instructions. 1 Make sure the product is NOT CONNECTED to your computer. 2 Slide the side edge guides all the way out. 3 Insert paper with the glossy or printable - Epson ET-4760 | Start Here - Installation Guide - Page 4
Epson specialty and plain papers, engineered specifically for Epson printers. Find Epson papers and Epson Genuine Ink at www.epson.com (U.S. sales) or www.epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766). ET-3760/ET-4760 replacement inks Color Black
-
1 -
2 -
3 -
4
 |
 |
Start Here
IMPORTANT:
Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s
Guide
.
Important Safety Instructions:
When using telephone equipment, you
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson
®
product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
•
Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution:
To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
The illustrations show the ET-4760, but the steps are the same
for all models, unless otherwise specified.
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit. Remove all protective materials
from inside the product.
Caution:
Do not touch the flat white cable or the ink tubes and
their translucent cover.
2
Fill ink tanks
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
Caution:
This product requires careful handling of ink. If ink spills,
wipe it off immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product.
Part of the ink will be used to charge the print head. These bottles
may print fewer pages compared with replacement ink bottles.
1
Open the ink tank cover, then open the cap for the
black ink.
2
Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Caution:
Do not shake or squeeze the ink bottles. Do not touch
the top of the ink bottle after its cap is removed.
3
Insert the ink bottle into the filling port, as shown below.
ET-3760/ET-4760