Epson ET-4700 Start Here - Installation Guide
Epson ET-4700 Manual
 |
View all Epson ET-4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson ET-4700 manual content summary:
- Epson ET-4700 | Start Here - Installation Guide - Page 1
ET-4700 Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. Important Safety Instructions: When using telephone equipment, you should always follow basic safety precautions to reduce the risk of fire, electric - Epson ET-4700 | Start Here - Installation Guide - Page 2
takes about 10 minutes. When the power light stops flashing, ink charging is complete. Once initial setup of the printer is complete, you can top off the ink tanks with any remaining ink. See the online User's Guide for instructions. 7 Repeat the previous steps for the other colors. Caution: Do - Epson ET-4700 | Start Here - Installation Guide - Page 3
side up and short edge first, in the middle of the rear paper feed slot. Note: Make sure the paper is under the mark inside the edge guides. 4 Slide the edge guides epson.com/support/gcp (U.S.) or www.epson.ca/support/gcp (Canada) for instructions device. Simply connect your printer and device to the - Epson ET-4700 | Start Here - Installation Guide - Page 4
specialty papers, engineered specifically for Epson printers. Find specialty papers and Epson Genuine Ink at www.epson.com (U.S. sales) or www.epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766). ET-4700 replacement inks Color Part number Black 522
-
1 -
2 -
3 -
4
 |
 |
Start Here
IMPORTANT:
Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s Guide
.
Important Safety Instructions:
When using telephone equipment,
you should always follow basic safety precautions to reduce the risk of
fire, electric shock, and personal injury, including the following:
• Do not use the Epson
®
product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution:
To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
Remove all protective materials from the product.
Note:
Do not turn on the product yet.
2
Fill ink tanks
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
Caution:
This product requires careful handling of ink. If ink spills,
wipe it off immediately with a damp towel to avoid permanent stains. If
ink gets on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of non-genuine ink.
• Use the ink bottles included with the printer to set up the product.
Part of the ink will be used to charge the print head. These bottles
may print fewer pages compared with replacement ink bottles.
1
Open the ink tank cover and the cap for the black ink
tank.
Note:
Refer to the color-coded sticker on the ink tank unit to
identify the color of each tank.
2
Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Caution:
Do not shake or squeeze the ink bottle. Do not touch
the top of the ink bottle after its cap is removed.
3
Place the top of the ink bottle on the filling port, then
slowly stand the bottle upright to insert it, as shown.
Note:
Do not force the bottles into position; they are keyed for
each color.
4
Wait for the ink to fill the tank. Do not squeeze the bottle.
Note:
Ink flows into the tank and stops automatically when the
ink tank is filled to the upper line. If ink does not flow from the
bottle, lift and reinsert the bottle.
ET-4700