Epson ET-3750 Start Here - Installation Guide
Epson ET-3750 Manual
 |
View all Epson ET-3750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson ET-3750 manual content summary:
- Epson ET-3750 | Start Here - Installation Guide - Page 1
show the ET-4750, but the steps are the same for all models, unless otherwise specified. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, consulte la Guía de instalación en www.epson.com/support/et3750sp o www.epson.com/ support/et4750sp - Epson ET-3750 | Start Here - Installation Guide - Page 2
using the remaining ink in the bottles. Note: Replace the bottle cap before disposing of the bottles. 14 Close the ink tank cover and scanner unit. 15 Select Next and follow the on-screen instructions to reset the ink levels. 16 Follow the on-screen instructions to adjust the print quality. Press - Epson ET-3750 | Start Here - Installation Guide - Page 3
and run your product's software package: ET-3750 www.epson.com/support/et3750 (U.S.) www.epson.ca/support/et3750 (Canada) ET-4750 www.epson.com/support/et4750 (U.S.) www.epson.ca/support/et4750 (Canada) 3 Follow the instructions on the computer screen to run the setup program. 4 When - Epson ET-3750 | Start Here - Installation Guide - Page 4
at www.epson.com (U.S. sales) or www.epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766). ET-3750/ET-4750 replacement inks Color Black Cyan Magenta Yellow Part number 502 502 502 502 Any questions? Quick Guide Basic information, troubleshooting, and
-
1 -
2 -
3 -
4
 |
 |
Start Here
Read these instructions before using your product.
The illustrations show the ET-4750, but the steps are the same for
all models, unless otherwise specified.
Note for Spanish speakers/Nota para hispanohablantes:
Para
obtener instrucciones de configuración en español, consulte la
Guía de
instalación
en
www.epson.com/support/et3750sp
o
www.epson.com/
support/et4750sp
(requiere una conexión a Internet).
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit. Remove all protective materials
from inside the product.
Caution:
Do not touch the flat white cable or the ink tubes and
their translucent cover.
2
Fill ink tanks
Note:
This product requires careful handling of ink. If ink spills, wipe it
off immediately with a damp towel to avoid permanent stains. If ink gets
on your clothes or belongings, it may not come off.
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
1
Open the ink tank cover, then open the cap for the ink tank
you are going to fill.
2
Unpack one of the ink bottles. Hold the ink bottle upright
and slowly turn the bottle cap to remove it.
Caution:
Do not shake or squeeze the ink bottles. Do not touch
the top of the ink bottle after its cap is removed.
3
Position the top of the ink bottle along the slot in front of
the filling port, then slowly stand the bottle up to insert it.
Note:
Refer to the color-coded sticker to identify the color of
each tank. Do not force the bottles into position; they are keyed
for each color.
4
Wait for the ink to fill the tank.
Do not squeeze the bottle.
Ink flows into the tank and stops automatically when the
ink is filled to the upper line.
Note:
If ink does not flow from the bottle, lift and reinsert the
bottle.
ET-3750/ET-4750