Epson ELPMBATA Installation Guide
Epson ELPMBATA - High Security - Mounting Manual
 |
UPC - 010343868595
View all Epson ELPMBATA manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson ELPMBATA manual content summary:
- Epson ELPMBATA | Installation Guide - Page 1
INSTALLATION MANUAL High Security Projector Ceiling Mount MODEL# ELPMBATA Manufactured by: Business Machine Security, Inc. 520 W. Central Ave. Brea, CA 92821 www.LocDown.com - Epson ELPMBATA | Installation Guide - Page 2
Table of Contents Limited Warranty Information 3 Contact Business Machine Security 3 Warning Statement...3 Parts List...4 Mount Assembly...5 Securing Receiver Tray to Pipe 6 Mounting Projector to Grid Plate 7-9 Locking Grid Plate to Receiver Tray 10 Adjusting Mount...11 INSTALLATION MANUAL 2 - Epson ELPMBATA | Installation Guide - Page 3
the ceiling mount, do not use adhesives, lubricants, or oils to prevent the screws from loosening. If you use adhesives, lubricants, or oils to prevent the screws from loosening, the casing may crack and the projector may fall, causing serious injury and damage to the projector. INSTALLATION MANUAL - Epson ELPMBATA | Installation Guide - Page 4
Installation Tools Parts List Phillips Head Screwdriver (not provided) Pipe Adhesive (provided) Mounting Hardware 4mm X 10mm Pan Head Metric Screw (Qty 4) 4mm X 20mm Pan Head Metric Screw (Qty 4) #10 SAE Flat Washer (Qty 4) 3/8" Thick Spacer (Qty 4) INSTALLATION MANUAL 4 - Epson ELPMBATA | Installation Guide - Page 5
E Receiver Tray F Grid Plate G Pan Head Metric Screw* 4mm X 10mm 4mm X 20mm H #10 SAE Flat Washer I Screw Lock J 3/8" Spacer P Projector (Not included) *see pages 7-9 for proper hardware to use for your model projector GRID PLATE TO RECEIVER TRAY INSTALLATION MANUAL 5 - Epson ELPMBATA | Installation Guide - Page 6
Securing Receiver Tray to Pipe Twist off the cap from the Pipe Thread installers responsibility to be sure that the structure to which this mount will be attached, can support four times the combined weight of the equipment, mount and supporting hardware. (not provided) INSTALLATION MANUAL 6 - Epson ELPMBATA | Installation Guide - Page 7
Grid Plate (F) to the projector using these screws (G) and washers (H). Turn until snug. Do not over tighten. Soft Cloth or Packaging Material INSTALLATION MANUAL NOTE: The 400W need 3/8" Spacers (J) to level the Grid Plate (F). Place the Spacers (J) over the mounting inserts and then place the - Epson ELPMBATA | Installation Guide - Page 8
Model# 1700c, 1705c, 1710c, 1715c Epson Projector Model# S5, 77c, 83+, 822+, 400W Mounting Inserts HARDWARE Mounting Inserts: Grid Plate Alignment • #10 SAE Flat Washers (Qty 3) • 4mm X 10mm Pan Head Metric Screws (Qty 3) INSTALLATION MANUAL Mounting Inserts Grid Plate Alignment HARDWARE - Epson ELPMBATA | Installation Guide - Page 9
Epson Projector Model# 6110i Mounting Inserts NOTE: For updated information on compatibility with the latest Epson projector models, visit www.epson.com" Grid Plate Alignment HARDWARE Mounting Inserts: • #10 SAE Flat Washers (Qty 4) • 4mm X 10mm Pan Head Metric Screws (Qty 4) INSTALLATION MANUAL - Epson ELPMBATA | Installation Guide - Page 10
to Receiver Tray 1. After the Receiver Tray (E) has been attached to the ceiling and the projector has been attached to the Grid Plate (F), slide the Grid Plate (F) into the Receiver Tray (E). Before completely closing the mount, route the cables that are running down the 1-1/2" Pipe (A) and out the - Epson ELPMBATA | Installation Guide - Page 11
Adjusting Mount 1. To align the projector, simply grab a hold of either side of the mount and gently adjust by lifting up and pushing down to Adjust TENSION RING Tighten to Lock Gently Adjust INSTALLATION MANUAL All other brand and product names are trademarks or registered trademarks of their respected
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
 |
 |
INSTALLATION MANUAL
High Security Projector Ceiling Mount
MODEL# ELPMBATA
Manufactured by:
Business Machine Security, Inc.
520 W. Central Ave.
Brea, CA 92821
www.LocDown.com