Epson ELPDC20 Quick Start

Quick Start

Follow these instructions to display pages from books and documents, and

three-dimensional objects. To use other features, see the

User’s Guide

on the

product’s CD-ROM. It provides instructions for using the microscope adapter,

capturing still images, and using the included software.

Before using the product, make sure you read the safety instructions in the

User’s Guide

on the product’s CD-ROM.

Setting up the product

1

Raise the camera arm.

2

Connect your projector. Use a VGA cable (included), a composite video

cable (check your projector for available ports), or an HDMI cable (not

included).

Composite video cable

VGA cable

HDMI cable

3

Connect the power adapter.

4

Press the

power button to turn on the document camera.

5

Turn on your projector. Then select the source (port) on the projector that

lets you display the camera image. On the document camera, press the

Source

button, if necessary.

Using the product

1

Place your document on the table under the camera head. Align the

center of your document with the

mark on the side of the document

camera.

2

Slide the lamp switch to illuminate the document.

Lamp switch

3

Press the

Focus

button on the document camera or the

Auto Focus

button on the remote control. Your document is automatically focused.

4

To zoom in or out on part of the image, press the

Zoom

or

button.

Note:

You can also use the remote control to adjust the image.

When you’re done using the product, turn it off and lower the camera arm

as

shown.

EPSON

®

DC-20 Document Camera (ELPDC20)

*412373100*