Epson DM-D500 Installation Guide
Epson DM-D500 Manual
 |
View all Epson DM-D500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson DM-D500 manual content summary:
- Epson DM-D500 | Installation Guide - Page 1
DM-D500 Installation Guide 401467401 - Epson DM-D500 | Installation Guide - Page 2
alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than - Epson DM-D500 | Installation Guide - Page 3
, immediately turn the power off and contact your dealer or a SEIKO EPSON service center for advice. Continued usage may lead to fire or shock. CAUTION: Do not plug the cable differently from the instruction in this manual. Wrong connection may cause equipment damage and fire. Be sure to set - Epson DM-D500 | Installation Guide - Page 4
1 are in the box. 1 User's Manual display (DM-D500) Make sure that you have all the items shown, and that none has been damaged. If you find anything missing or damaged, contact your DM-D500 dealer. Cautions on Handling When you use the DM-D500, note the following points: ❏ Avoid locations - Epson DM-D500 | Installation Guide - Page 5
stand. You can attach the DM-D500 directly to the DM-D stand using the "DM-D stand unit for DM-D500" (DP-501). When using the DM-D stand, an optional power supply unit (PS-180) is required. Also, if you want to raise the height of the DM-D500, an optional extension support unit (DP-105) is required - Epson DM-D500 | Installation Guide - Page 6
and higher BKS0 510001 and higher 181 BNV0 000001 and higher BNV0 510001 and higher 201 B430 000001 and higher B430 510001 and higher 211 B5X0 000001 and higher B5X0 2 and 3), it can be connected to the DM-D500 without an additional board. 2 blue seal 3 scribed square 4 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 7
-D500 through support C, and attach support C to the DM-D500 as shown in illustration 5. When using support B for extension, insert the tab on support B into the hole on support C as shown in illustration 6 until you feel it click. 5 6 when using support B for extension DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 8
the base as shown in illustration 8. 8 4. Insert the tab on the base into the hole on the support as shown in illustration 9 9 until you feel it click. 5. Connect the cable for the DM-D500 to the DM 10 connector on the TM printer as shown in illustration 10. 6 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 9
The items shown in illustrations 11 or 12 are used to attach a DM-D500 to a TM-U950 printer. These items are packed with the "DM-D pole unit for TM printers (Type A)" (DP-502). 11 rubber feet (square) fixing screws 12 support C support B for extension fixing plate A DM-D500 Installation Guide 7 - Epson DM-D500 | Installation Guide - Page 10
it click. 13 14 when using support B for extension 2. Attach the rubber feet to the printer as shown in illustration 15. 15 3. Pass the cable for the DM-D500 through the 16 hole on fixing plate A, and fix the cable at the bottom as shown in illustration 16. 8 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 11
18. 6. Store any excess cable in the 19 support, and attach the DM-D500 to fixing plate A as shown in illustration 19. English Attaching to the TM-H6000 Series or TM-U675 The DM-D500 can be attached directly to a TM-H6000 series or TMU675 printer using the "DM-D pole unit for TM printers (Type A)" - Epson DM-D500 | Installation Guide - Page 12
cable for the DM-D500 through support C, and attach support C to the DM-D500 as shown in illustration 21. When using support B for extension, insert the tab on support B into the hole on support C as shown in illustration 22 until you feel it click. 21 22 10 DM-D500 Installation Guide when using - Epson DM-D500 | Installation Guide - Page 13
the printer as shown in illustration 23. 23 3. Attach fixing plate B to the printer as shown in illustration 24. 24 4. Pass the cable for the DM-D500 through the hole on fixing plate A, and fix the cable at the bottom as shown in illustration 25. 25 DM-D500 Installation Guide 11 - Epson DM-D500 | Installation Guide - Page 14
English 5. Connect the cable for the DM-D500 to the DM connector on the TM printer as shown in illustration 26. 26 6. Attach fixing plate A to the TM printer using side of the printer. (Illustration 27 shows fixing plate A attached to the right side of the printer.) 27 12 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 15
English 7. The horizontal rotation mechanism of fixing plate A can be adjusted. To secure the location of the display, set fixing plate A to one of the four positions shown in illustration 28, 29, 30, or 31, and secure it with the angle fixing screw. 28 29 30 31 DM-D500 Installation Guide 13 - Epson DM-D500 | Installation Guide - Page 16
illustration 32. 32 roll paper cover 8. Store any excess cable in the 33 support, and attach the DM-D500 to fixing plate A as shown in illustration 33. 9. Connect the power cable , TM-U230, TM-T90, or TM-L90 The DM-D500 can be attached to a TM-T88II, TM-U210, TM-U230, TM-T90, or TM- - Epson DM-D500 | Installation Guide - Page 17
in illustration 35 are used to attach a DM-D500 to a TM-T88II, TM-U210, TM-U230, TM-T90, or TM-L90 printer. These items are packed with the "DM-D pole unit for TM printers" (DP-505). 35 support extension support fixing plate installation manual fixing screws for wooden position Velcro tapes - Epson DM-D500 | Installation Guide - Page 18
the hole on the support as shown in illustration 37 until you feel it click. 36 37 when using an extension support 4. Pass the cable for the display through the hole on the fixing plate, and attach the support to the fixing plate as shown in illustration 38. 38 16 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 19
the TM printer, if necessary. 41 TM-T88II printer with the UB-S09 installed CAUTION: Do not connect this connector to an ordinary telephone line. DM-D500 Installation Guide 17 - Epson DM-D500 | Installation Guide - Page 20
3. Follow steps 7 to 9 in "Assembling using Velcro tapes." Attaching to Other TM Printers When using with other TM printers, the DM-D500 can be attached to a desk or other surface using the "DM-D pole unit for TM printers (Type A)" (DP-502) and screws or Velcro tapes. 18 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 21
through support C, and attach support C to the DM-D500 as shown in illustration 46. When using support B for extension, insert the tab on support B into the hole on support C as shown in illustration 47 until you feel it click. 46 47 when using support B for extension DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 22
TM printer as shown in illustration 49. 5. Store any excess cable in the support, and attach the DM-D500 to fixing plate A as 50 shown in illustration 50. 6. Peel off the with fixing screws as shown in illustration 51. 3. Attach the DM-D500 to fixing plate A. 20 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 23
unit (DP-501). 52 DM-D stand base plate extension cable for power supply 53 Velcro tapes RS-232 connector installation screw (mm type) 54 power supply unit (PS-180) extension support AC cable DM-D500 Installation Guide 21 - Epson DM-D500 | Installation Guide - Page 24
connector installation screw JP1 JP2 Contents 1-2 1-2 When connecting both the TM printer and the DM-D stand. (Default setting.) 2-3 2-3 When using the DM-D stand as a standalone. (TM printer is not connected.) The jumpers are located as shown in illustration 57. 57 22 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 25
support (DP-105) to the DM-D stand as shown in illustration 59. 58 59 when using the extension support (DP-105) 2. Insert the tab on the DM-D500 (or the extension support) into the hole on the DM-D stand as shown in illustration 60 until you feel it click. 60 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 26
. 61 4. Connect one end of the computer interface cable to the computer connector on the DM-D stand; then connect the other end to the RS-232 connector on the computer as shown in illustration 62. Tighten the screws on both ends of the cables to fasten them. 62 computer 24 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 27
connect it (with the arrow mark up) to the extension cable connector indicated with "POWER OUT" on the DM-D stand; then connect the other end to the power connector on the printer as shown in illustration 64. extension cable connector 64 extension cable for power supply DM-D500 Installation Guide 25 - Epson DM-D500 | Installation Guide - Page 28
base plate until it is locked by the hook on the DM-D stand. 67 11. When the extension support (DP-105) is used, attach Velcro tapes to the four corners of the plate to keep it from falling down. 12. Connect the cord of the power unit to the socket. 26 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 29
display) ❏ Display: Characters are displayed. ❏ Power switch: The power is turned on/off. ❏ DIP switch: The functions of the DM-D500 are changed. See "DIP Switch" for details. Note: When turning on the DM-D500 again after turning it off, wait for at least 3 seconds. DM-D500 Installation Guide 27 - Epson DM-D500 | Installation Guide - Page 30
Switch DIP Switch Functions The DM-D500 has two groups of DIP switches OFF ON OFF ON (*1) XON/XOFF is effective only when the DM-D500 is connected as a standalone. Transmission speed* SW1-6 ON OFF ON 115200 *When the DM-D500 is connected to a TM printer, be sure that the transmission - Epson DM-D500 | Installation Guide - Page 31
column and 2 line mode," this product can be used like the DM-D105/106/205/206. In this case, the graphic display and the original functions for the DM-D500 cannot be used; however, by selecting "256 × 64 dots mode," , must be the same on both your computer and printer. DM-D500 Installation Guide 29 - Epson DM-D500 | Installation Guide - Page 32
DM-D500 You can turn or tilt the display while holding the support. The display can be moved easily, so do not move it any further if it stops. If you move it by force, you may damage it. With the "DM ) ❏ Horizontal rotation: 90° max. (45° for each left and right) 30 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 33
37 Extended graphics: 128 × 12 Kanji supports one of the following sets: Japanese ( DM-D10x emulation • Period, comma: DM-D20x emulation • Annunciator: DM-D20x emulation • Type: PS-180 (when using the DM 30% to 90% (no condensation) See figures below. DM-D500: 460 g {1.01 lb}, DP-501: 440 g {0.97 lb}, - Epson DM-D500 | Installation Guide - Page 34
English DM-D500 213 mm {8.4"} 83 mm {3.3"} DM-D stand (DP-501) 200 mm {7.9"} 65 mm {2.6"} 51 mm {2.0"} 48° 118 mm {4.7"} 90° 32 DM-D500 Installation Guide - Epson DM-D500 | Installation Guide - Page 35
unit for TM printer (Type B) (DP-503) DM-D pole unit for TM printers (Type A) (DP-502) 248 mm {9.8"} 260 mm {10.2"} 50 mm {1.9"} base 78 mm {3.1"} 53 mm {2.1"} DM-D pole unit for TM printers (DP-505) 164 mm {6.5"} 260 mm {10.2"} 130 mm {5.1"} 214 mm {8.4"} DM-D500 Installation Guide 33 - Epson DM-D500 | Installation Guide - Page 36
English 34 DM-D500 Installation Guide
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
DM-D500
Installation Guide
401467401