Epson DC-10s Supplemental / Late Breaking Information

Product Update

To make the best use of your Epson

®

DC-10s document camera, keep these points

in mind and see your

User’s Guide

for more information:

■

Displaying computer images

To display your computer or laptop image through the document camera,

you’ll need two VGA cables (one is included). Connect one cable from your

computer to the document camera, and the other cable from the document

camera to your projector or video display device.

You cannot display computer images through the document camera’s S-video

port.

■

Maintaining good image quality

For best results, use the 6-foot VGA cable included with the document

camera. If you use a longer cable, the image quality may be reduced, especially

if your computer is set to a higher resolution such as SXGA+ or UXGA. If

necessary, set your computer to a lower resolution, or use a distribution

amplifier to reach a greater distance.

■

Correcting a stretched image

If the image appears stretched when using the document camera’s S-video

port, turn off the document camera, and then turn it back on. This resets the

system and corrects the image.

■

Exporting images to an SD

TM

card

When you export images from the document camera to an SD card, bear in

mind that the document camera does not have an internal clock. Therefore,

when you view the images on your computer, they will not display a current

time stamp. Also, if you use the document camera to rotate photos taken with

your digital camera, their time stamp will be changed to a default value.

Epson is a registered trademark of Seiko Epson Corporation. General Notice: Other product

names used herein are for identification purposes only and may be trademarks of their respective

owners. Epson disclaims any and all rights in those marks.

© 2008 Epson America, Inc. 5/08

Printed in USA

CPD-25844R1