Epson ColorWorks CW-C6000P Technical Reference Guide

Epson ColorWorks CW-C6000P Manual

Get Epson ColorWorks CW-C6000P PDF manuals and user guides View all Epson ColorWorks CW-C6000P manuals
Add to My Manuals
Save this manual to your list of manuals

Epson ColorWorks CW-C6000P manual content summary:

  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 1
    Technical Reference Guide Product Overview Describes features for the product. Setup Describes setup and installation of the product. Handling Describes how to handle the product. Information for Application
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 2
    every precaution has been taken in the preparation of this manual, Seiko Epson Corporation assumes no responsibility for errors or omissions.  Neither Seiko Epson Corporation's operating and maintenance instructions.  Seiko Epson Corporation shall not be liable for any damages or problems arising
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 3
    daily tasks, and developing a system using the product. Manual viewable with PC Online Video Manual Provides videos that show you operating procedures and troubleshooting information. Access the videos from the following URL. The contents of videos are
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 4
    are used in this guide to indicate important information. Symbols for Safety The symbols shown below are used in this manual in order to ensure . Be sure that you completely understand their meanings before reading this manual. Handling the product improperly by ignoring this symbol can lead to
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 5
    Safety Precautions To ensure safe use of the product, be sure to read this manual and the other instruction manuals supplied with the product before use. Store this manual in a safe place so that you can resolve any unclear points regarding the product at any time. Cautions on Installation WARNING
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 6
    power and remove the plug from the outlet, and then contact qualified service personnel for advice.  Shut down the product immediately if a foreign object improperly, it may result in fire or injury. Follow the instructions in this manual to install them properly.  Before moving the product, shut
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 7
    device. Doing so may cause electric shock or fire.  Do not use a damaged power cord. Doing so may cause electric shock or fire. Contact qualified service personnel for advice if the power cord is damaged. Furthermore, observe the following points so as not to damage the power cord.  Do not modify
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 8
    Cautions on Ink Cartridges CAUTION  The ink cartridges that can be used differ depending on the model number of the product. Use ink cartridges suitable for the model number of your printer. ("Ink Cartridges" on page 320)  Do not touch the IC chip on an ink cartridge. Doing so may result in
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 9
    touch the print surface. Select and use paper that will not cause print stains.  Store the ink cartridges in a place out of reach of children.  Epson recommends storing ink cartridges in a cool and dark place.  If you wish to use ink cartridges that have been stored in a cold place for a long
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 10
    not touch the roller at the bottom of the paper holder unit with your hand. Doing so may cause injury. CAUTION Do not touch the manual cutter at the bottom of the peeler cover with your hand. Doing so may cause injury. 10
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 11
    screens. Depending on version of the printer driver and utility you are using, screens shown in this manual may slightly differ from actual screens. Illustrations Unless otherwise noted, illustrations of CW-C6500 Series are used in this manual. They may look slightly different from your printer. 11
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 12
    ...3 Symbols Used in This Guide...4 Safety Precautions...5 Cautions on Installation ...5 Cautions on Handling ...6 Cautions on Power Supply ...7 Cautions on Ink Cartridges...8 Cautions on the Maintenance Box ...9 Caution Label ...10 ■ Restriction of Use ...11 ■ About This Manual ...11 Aim of the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 13
    Paper End (For the Auto Cutter Model 65 How to Eject Paper at Paper End (For the Peeler Model 66 Feeding Paper into the Printer Manually...67 ■ Test Print ...68 Test Print using the Printer Driver ...69 Handling ...70 ■ Printer Driver for Windows 70 Printer Driver Screen Configuration ...71 Paper
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 14
    for Mac ...118 Basic Procedure for Printing ...118 Customizing the Printer Driver...124 Epson Label Printer Utility...126 ■ Printer Driver for Linux ...128 Getting the Package (epson-inkjet-printer-cw-c6000c6500 129 Installing the Printer Driver ...129 Installing Input/Output Modules ...129 Adding
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 15
    216 Cleaning the Peeler (Peeler Model Only)...217 Cleaning the Edge Guides...218 Cleaning the Platen ...219 Cleaning the Paper Feed Roller...220 Transporting the Printer 229 ■ Troubleshooting...230 A message is displayed on the operation panel 230 Print Quality Problems ...234 Cannot Print ...236
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 16
    Development 249 ■ How to Control the Printer 249 ■ Using the Epson Inkjet Label Printer SDK 250 Operating Environment...250 How to Get Software One-Step Printing 251 Utilizing Templates ...271 ■ Software and Manuals ...272 Appendix...273 ■ Product Specifications ...273 Operating Environment...274
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 17
    ) ColorWorks C6000Au, ColorWorks C6000Ae, ColorWorks C6010A, ColorWorks C6020A, ColorWorks C6030A, ColorWorks C6040A, ColorWorks C6050A CW-C6500 Series (8-inch model) ColorWorks C6500Au, ColorWorks C6500Ae, ColorWorks C6510A, ColorWorks C6520A, ColorWorks C6530A, ColorWorks C6540A, ColorWorks C6550A
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 18
    operation panel ("Operation Panel Settings" on page 175) To get the latest version of the printer driver and utility, see "Downloading Printer Driver, Utilities, and Manuals" on page 327. 18
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 19
    Part Names and Functions This section describes the main operation parts. Front Paper cover Chapter1 Product Overview Peeler model Front cover Maintenance box cover Ink cartridge cover Peeler cover Name Front cover Ink cartridge cover Maintenance box cover Paper cover Peeler cover (peeler model
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 20
    Rear Chapter1 Product Overview Power connector Name Power connector Wire saddle Description Connect the power cable. Pass the USB cable through this saddle to prevent disconnection of the cable. Air vent LAN port USB port Wire saddle USB port LAN port Air vent Connect a USB cable. Connect a
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 21
    up, the paper pressure rollers are unlocked and you can remove paper jammed inside the front cover. Supports paper while the paper is fed into the printer. When loading paper, load the paper along this guide. Move this unit when cleaning the paper feed roller. If you pull the blue lever, the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 22
    Spindle and Flange Used to supply the paper from the inside. Flange Spindle Chapter1 Product Overview Flange Name Spindle Description Attach this to the spindle to fix the roll paper loaded on the spindle. Squeeze the blue lever to attach or remove to/from the spindle. Load roll paper on this
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 23
    This allows you to know the cause of an error and how to resolve the problem.  (power) LED Stays on while the printer is on. Flashes during printing or charging ink.  Status LED Stays on or flashes while an error or problem is occurring.  Pause LED Stays on or flashes while the printer is paused.
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 24
    . Matte black ink is displayed as "MK". You can see troubleshooting information and basic operating procedures. Allows you to access the maintenance menus , various printer settings, and network settings. Throughout this manual, touching this button is indicated as [Menu]. All the settings
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 25
    Chapter1 Product Overview Nozzle Verification Technology The "Nozzle Verification Technology" allows the printer to detect clogging of the print nozzles by self-check. Depending on required print quality, you can enable or disable the "Nozzle Verification Technology" function, set how often to run
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 26
    Chapter1 Product Overview Setting Auto Nozzle Check Interval Specify the number of printouts to let the printer run the nozzle check when reached the number. The printer will stop while running the check. How to Set Set using the operation panel of the printer, or using PrinterSetting. Specify the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 27
    Chapter1 Product Overview Dot Substitution (Supplemental Printing) Function The "Dot Substitution" function automatically supplements missing dots caused by clogged nozzles with dots generated by nozzles adjacent to the clogged nozzles. The number of nozzles that can be supplemented is up to 16
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 28
    Chapter1 Product Overview Periodic Auto Cleaning Sometimes, the printer runs a periodic cleaning automatically to maintain the print head in good condition. The cleaning takes 3 to 14 minutes, and printing is disabled during the cleaning. To prevent the cleaning from running when you want to print,
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 29
    Checking the Printer Status Chapter1 Product Overview Printing the Status Sheet By printing the status sheet, you can check the firmware version and the current printer settings, such as print mode and media detection settings. On the operation panel, select the menu in the order shown below to
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 30
    Chapter1 Product Overview Printing the Network Connection Check Report By printing the network connection check report, you can check the network connection status and the network settings. On the operation panel, select the menu in the order shown below to print the report. [Menu] - [General
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 31
    Chapter1 Product Overview Checking the Status of Consumables On the home screen of the printer, you can check the following information; the status of the ink cartridges and the maintenance box, paper settings (paper type, detection method, label width/length), remaining amount of paper. ("Home
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 32
    accessories are included and they have no damages. The included items are as follows. 1 Printer (CW-C6000 Series or CW-C6500 Series) 3 Roll paper (for initial operation check) 5 Power cable 7 CD-ROM ) cartridge or MK (matte black) cartridge is included. 4 Flange and Spindle 6 USB cable 8 Manual 32
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 33
    Chapter2 Setup Removing the Protective Materials Remove the all protective materials such as pieces of tape and cushion materials. There are about eight protective materials and some of them have been attached to inside the printer. 33
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 34
    that the installation location meets the following requirements.  On a level and stable surface with sufficient strength to support the weight of the printer Auto cutter model Peeler model CW-C6000 Series CW-C6500 Series Approx. 22.5 kg Approx. 25.5 kg Approx. 22.8 kg Approx. 26.3 kg  On an
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 35
    Chapter2 Setup Connecting the Power Cable Follow the procedure below to connect the power cable. WARNING Install the printer near a wall outlet so that you can disconnect the plug from the outlet immediately in the event of an emergency. 1 Insert the power cable firmly all the way into the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 36
    Turning On/Off Turning the Power On Hold down the (power) button until the (power) LED lights up. ON Chapter2 Setup Turning the Power Off Press the (power) button. Then select [Yes] on the confirmation screen. The (power) LED goes out and the printer is turned off. 36
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 37
    Setting Language and Date/Time Follow the on-screen instructions to set language, the date and time. Chapter2 Setup Selecting Black Ink Type TS25K3, or TS21K5, select which type of black ink you use following the on-screen instructions. On the black ink type confirmation screen, select [Done]. 37
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 38
    Chapter2 Setup Installing the Ink Cartridges Follow the on-screen instructions to install the ink cartridges. When you close the cover, a message that confirms whether to start initial ink charging is displayed. Select [Yes] to start
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 39
    Chapter2 Setup Replacing the Ink Cartridges Checking Amount of Ink Remaining You can check ink level of each color ink cartridge on the home or an error message screen of the operation panel. Message Description You need to replace Ink Cartridge(s). To maintain the quality of the print head,
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 40
    3 Open the bag and take out the new ink cartridge. Chapter2 Setup 4 Shake the ink cartridge. As shown in the figure below, shake the cartridge horizontally. Move the cartridge by about 5 cm to both directions, and repeat it about 15 times for about 5 seconds. 5 Install the ink cartridge in the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 41
    maintenance box on the home or an error message screen of the operation panel. Message Description The Maintenance Box is at the end of its service life. You need to replace it. Replace the maintenance box with a new one. How to Replace the Maintenance Box 1 Open the paper cover. 2 Open the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 42
    Chapter2 Setup 3 Take out the maintenance box. When disposing of the used maintenance box, put it in a plastic bag that came with the new maintenance box. 4 Take out a new maintenance box from the bag. 5 Install the new maintenance box. 6 Close the maintenance box cover. 42
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 43
    get the software from the following website. For customers in North America, go to the following web site: www.epson.com/support/ For customers in other countries, go to the following web site: www.epson-biz.com/ How to Connect to a Computer Connect the interface cable to be used to the connector on
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 44
    /IP] and then press the [OK] button. 7 Select [Obtain IP Address] and then select [Auto] or [Manual] using the [OK] button. When you select [Auto], the network setting is complete. When you select [Manual], proceed to step 8. 8 Enter the IP address and the subnet mask. Select a setting to change and
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 45
    starts. Read and accept the software licensing agreement, and then click [Next]. For the subsequent steps, follow the on-screen instructions. Install Navi will guide you to install the printer driver, PrinterSettings, and other software. The setup can be completed even if you skip the installation
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 46
    Chapter2 Setup Media Settings Configure the media source to use, and type, shape, detecting method of media to use.  When using the Windows printer driver See "Printer Driver for Windows" on page 70.  When Not using the Windows printer driver See "PrinterSetting (Windows)" on page 135.  When
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 47
    Chapter2 Setup Opening the Paper Cover This section describes how to open the paper cover. Do not use the printer with the paper cover removed. Doing so will cause the printer to malfunction. CAUTION Opening the Cover using the Lever in the Front Open the paper cover as shown above for the following
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 48
    to be supplied from inside or outside. Videos that show the procedure are also available. Click the URL below to view the videos. Supply from Inside (Internal) Paper is supplied from inside the printer. Set roll paper attached to the spindle into the printer
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 49
    Chapter2 Setup How to Load Paper (Auto Cutter Model - Supply from Inside) 1 Turn on the printer, and then check that [Internal] is selected as the [Media Source] setting on the operation panel. ("Operation Panel Settings" on page 175) 2 Open the paper cover. 3 Remove the spindle from the printer. As
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 50
    it in the printer. Install the spindle so that both ends of the spindle fit into the holders inside the printer. 6 Slide the movable edge guide to the right side. Squeeze the blue lever to move the edge guide. 7 Pull the paper along the left edge
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 51
    Make sure to follow the guidelines below.  There should be no gap between the guide and the paper edge.  Do not slide the guide against the paper too tightly. 9 Insert the paper into the paper feed slot the paper. To feed the paper into the printer manually, see "Feeding Paper into the Printer
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 52
    10 Rotate the spindle to remove looseness in the paper. Chapter2 Setup 11 Close the paper cover. 12 Press the [Pause] button. Loading paper (auto cutter model - supply from inside) is now completed. 52
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 53
    Chapter2 Setup How to Load Paper (Auto Cutter Model - Supply from Outside) 1 Turn on the printer, and then check that [Rear Feed] is selected as the [Media Source] setting on the operation panel. ("Operation Panel Settings" on page 175) 2 Open the paper cover. 3 Remove the spindle, if present. As
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 54
    sure not to let the fanfold paper to curl near the printer. Doing so will deform the paper resulting in a paper jam or a print quality problem. 5 Slide the movable edge guide to the left side. Squeeze the blue lever to move the edge
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 55
    . Chapter2 Setup 7 Place your hand on the paper to flatten it, and slide the movable edge guide against the paper. CAUTION If the movable edge guide is not properly slided against the paper, print position may become incorrect or a paper jam may occur. Make sure to follow the guidelines below
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 56
    Chapter2 Setup 8 Insert the paper into the paper feed slot until paper feeding starts automatically. Do not load backing paper that has no labels on it. The paper may not be detected and not be fed automatically. 9 Close the paper cover. 10 Press the [Pause] button. Loading paper (auto cutter model
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 57
    Chapter2 Setup How to Load Paper (Peeler Model - Supply from Inside) 1 Turn on the printer, and then check that [Internal] is selected as the [Media Source] setting on the operation panel. ("Operation Panel Settings" on page 175) 2 Open the paper cover 3 Remove the spindle from the printer. As shown
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 58
    it in the printer. Install the spindle so that both ends of the spindle fit into the holders inside the printer. 6 Slide the movable edge guide to the right side. Squeeze the blue lever to move the edge guide. 7 Pull the paper along the left edge
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 59
    Make sure to follow the guidelines below.  There should be no gap between the guide and the paper edge.  Do not slide the guide against the paper too tightly. 9 Insert the paper into the paper feed slot the paper. To feed the paper into the printer manually, see "Feeding Paper into the Printer
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 60
    10 Rotate the spindle to remove looseness in the paper. Chapter2 Setup 11 Close the paper cover. 12 Hold down the [Feed] button until the leading edge of paper touches the table on which the printer is installed. 13 Remove labels from the ejected paper. 60
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 61
    Chapter2 Setup 14 Open the peeler cover. Do not touch the manual cutter at the bottom of the peeler cover with your hand. Doing so may cause injury. ("Caution Label" on page 10) 15 Pass the paper
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 62
    ] button to feed the paper backward. The paper can now be pulled out from inside the printer. 4 Open the paper cover. 5 Slide the movable edge guide away from the paper, and remove the paper. Removing the paper is now completed. To load paper, see the following pages. "How to Load Paper
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 63
    How to Remove Paper (For the Peeler Model) 1 Check that the printer has been turned on. 2 Open the peeler cover. Chapter2 Setup 3 Cut the backing paper near the paper ejection slot. 4 Press the [Back Feed] button to feed the paper backward. The paper can now be pulled out from inside the printer.
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 64
    Chapter2 Setup 6 Slide the movable edge guide away from the paper, and remove the paper. Removing the paper is now completed. To load paper, see the following pages. "How to Load Paper (Peeler Model - Supply from Inside)" on page 57 64
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 65
    Chapter2 Setup How to Eject Paper at Paper End (For the Auto Cutter Model) 1 Hold down the Feed button until the paper is completely ejected. Ejecting paper at paper end is now completed. To load paper, see the following pages. "How to Load Paper (Auto Cutter Model - Supply from Inside)" on page 49,
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 66
    How to Eject Paper at Paper End (For the Peeler Model) 1 Open the peeler cover. Chapter2 Setup 2 Remove the paper from the peeler slot. Peeler slot 3 Hold down the Feed button until the paper is completely ejected. Ejecting paper at paper end is now completed. To load paper, see the following
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 67
    the printer automatically because the printer can fail to detect the paper. In such case, follow the procedure below to feed the paper manually. If this manual feeding method is used, the printer operation and print quality are not guaranteed. CAUTION 1 Advance the paper with your hand until the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 68
    Chapter2 Setup Test Print You can check whether the printer operates normally or not by printing a nozzle check patterns. Follow the procedure below to print the nozzle check patterns. The nozzle check patterns allow you to check print nozzles for clogging. 1 Turn the printer on. 2 Select [Menu]
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 69
    Chapter2 Setup Test Print using the Printer Driver If you have already installed the printer driver, you can do a test print using the printer driver. Follow the procedure below to do the test print. 1 Open [Devices and Printers]. 2 Right-click the icon of the printer, and then click [Printer
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 70
    describes how to operate the printer driver for Windows. The printer driver is software to control the printer in accordance with the print instructions of application software. Setting the print settings in the printer driver screen enables you to obtain the best print results. Furthermore, you can
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 71
    Chapter3 Handling Printer Driver Screen Configuration The printer driver is equipped with a help function. Right-click an item and then click Help to display an explanation on the item. 1 Current Settings pane Displays a summary of current settings. 2 General tab Lets you set media (paper) size,
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 72
    Paper Source and Paper Detection Settings 1 Open the printer driver window. 2 Click [Media Detection...] on the General tab. Chapter3 Handling 72
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 73
    Chapter3 Handling 3 Make the following settings to match them with the paper you use.  Media Source: Select how to supply paper to the printer. Setting item Internal roll (supply from Inside) Description Paper is supplied from inside the printer. Set roll paper attached to the spindle into the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 74
    Chapter3 Handling 4 Click [OK]. Paper source and paper detection settings are now complete. User-Defined Paper The size, form, type, and other settings of frequently used paper can be registered to the printer driver as a media definition. This is convenient because you will not need to set the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 75
    3 Click the [New] button. The New screen appears. Chapter3 Handling 4 Make the following settings to match them with the paper you use. 1 Media Name Enter the name of the media definition. This is the name displayed when you select a paper size from an application. 75
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 76
    2 Label width Enter the width of the label.  Continuous label: label width excluding the backing paper  Die-cut label: Label width excluding backing paper 3 Label length Enter the length of the label.  Continuous label: Length of the print range (length of one page)  Die-cut label: Label length
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 77
    Chapter3 Handling 6 Media Saving (for continuous label only) Select a media saving setting. The [Media Saving] function eliminates margins from one-page print data to suppress wasting paper. c IMPORTANT When the [Media Saving] function is enabled, printing a barcode using the barcode font of the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 78
    [Glossy Film], or [High Glossy Paper]  Standard: 600 x 600 dpi  Quality: 600 x 1200 dpi (Initial setting)  Max Quality: 1200 x 1200 dpi c IMPORTANT Supported paper types vary depending on which type of black ink, gloss black or matte black, is installed. See "Paper Specifications" on page 275
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 79
    at cut position) (Initial setting)  Do not cut (stop at peel position)  Do not cut (stop at the print end position) For the Peeler Model  Manual apply (Initial setting)  Auto apply  Rewind c IMPORTANT If you have set to [Cut (after last page of collate page)] and if the printer stops due
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 80
    5 Click [OK]. Chapter3 Handling 6 Check that the registered media name is displayed in the Media Definition screen and then click [Close]. 7 Check that you can select the registered media name in [Media Name] on the [General] tab. 8 Click the [OK] button to close the driver. Paper registration (
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 81
    Editing and Deleting 1 Open the printer driver window. 2 Click the [Media Definition] button on the [General] tab. The Media Definition screen appears. Chapter3 Handling 3 Click to select the media definition you wish to edit or delete. 81
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 82
    Chapter3 Handling 4 If you wish to change the definition settings, click the [Edit] button. The Edit screen appears and you can change the definition. If you wish to delete the definition, click the [Delete] button. A screen appears and if you click the [OK] button, the definition is deleted.
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 83
    Chapter3 Handling Printing Barcodes The printer has built-in fonts. This allows you to print a barcode without creating it on an application software. Barcode Font Settings You can make the barcode settings using [Barcode and 2D Symbol Settings] on the [Driver Utilities] tab. 1 Make the following
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 84
    Chapter3 Handling • Rotation Settings: Select an option to rotate a barcode. • Hexadecimal Input Mode: Select the check box to enter data for a barcode in hexadecimal. • Module: Specify the width of the narrowest element of the barcode in units of dot. • Bar Height: Specify the height of the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 85
    Chapter3 Handling Recommended Module Values Print directions of a barcode are as shown below. The recommended module values vary by paper type, barcode type, and the print direction. Paper width direction Paper width direction Paper feed direction Paper feed direction Fence barcode Ladder
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 86
    Chapter3 Handling Barcode ANSI Grade D Orientation or higher Minimum module size [in units of 300 dpi] ANSI Grade C or higher Plain Paper Matte Paper Synthetic Glossy Paper Glossy Film ITF Fence 4 3 3 3 3 Ladder 5 3 3 3 3 GS1 DataBar Fence 4 3 3 3 3 Omnidirectio nal
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 87
    Chapter3 Handling Barcode ANSI Grade D Orientation or higher Minimum module size [in units of 600 dpi] ANSI Grade C or higher Plain Paper Matte Paper Synthetic Glossy Paper Glossy Film Code128 Fence 7 5 5 5 5 Ladder 10 6 5 6 6 GS1-128 Fence 7 5 5 5 5 Ladder 10 6 5 6
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 88
    Chapter3 Handling How to Specify Barcode Data See the following descriptions to specify barcode data. About the composite symbol: Switching between CC-A and CC-B is automatically performed, however, to use CC-C, you need to specify to use it. (For GS1-128, the type of composite component can be
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 89
    Chapter3 Handling Code93  A start code, two check digits, and a stop code will be automatically added.  A character () that indicates a start code is printed at the beginning of the HRI characters.  A character () that indicates a stop code is printed at the end of the HRI characters.  A
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 90
    Chapter3 Handling Code128  If you have disabled the auto convert function, enter a two-digits start code at the beginning of the data. If you have enabled the auto convert function, the type of start character is automatically determined and you do not need to specify the type in your application.
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 91
    Chapter3 Handling GS1-128  '()' are used as delimiters for the application identifiers. (printed as the HRI character, but not encoded.)  A start code (CODE A, CODE B, CODE C) and a stop code will be automatically added.  A symbol character FNC1 is automatically added next to the start code. 
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 92
    Chapter3 Handling GS1 DataBar Expanded  '()' are used as delimiters for the application identifiers. (printed as the HRI character, but not encoded.)  Be sure to include all the application identifiers in the data.  If the first data is "01" when an application identifier, left and right
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 93
    Chapter3 Handling How to Print Open print data file in an application, and specify barcode font, point, and language that you have set on the printer driver, and then print it.  The barcode size cannot be changed from the point set in [Specified Point]. If you specify a size other than the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 94
    Chapter3 Handling Printing 2D Symbols The printer driver has the built-in 2D symbol font. This allows you to print a 2D symbol without creating it on an application software. Setting the 2D Symbol Font You can make the 2D symbol settings using [Barcode and 2D Symbol Settings] on the [Driver
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 95
    Chapter3 Handling 2 Make the settings for the barcode type you selected. • Settings for PDF417  Module Width: Set module width of PDF417. For the recommended value, see "Recommended Module Values" on page 97.  Module Height: Specify the ratio of PDF417 module height to the module width. For
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 96
    Chapter3 Handling • Settings for AztecCode  Type: Select a type of AztecCode.  Cell Size: Select a size of a cell (module) of AztecCode. For the recommended value, see "Recommended Module Values" on page 97.  Number of Layers: Specify the number of layers of AztecCode.  Error Correction
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 97
    Chapter3 Handling Recommended Module Values The recommended module values vary by paper type, 2D symbol type, and the print direction. 2D Symbols - Stacked code type ❏ 300 dpi Minimum module size [in units of 300 dpi] 2D Symbols ANSI Grade D Orientation or higher ANSI Grade C or higher Plain
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 98
    Chapter3 Handling Minimum module size [in units of 600 dpi] 2D Symbols ANSI Grade D Orientation or higher ANSI Grade C or higher Plain Paper Matte Paper Synthetic Glossy Paper Glossy Film High Glossy Paper GS1 DataBar - Expanded Stacked 10 5 5 5 5 5  If vibrations or shocks are
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 99
    Chapter3 Handling 2D Symbols - Matrix code type ❏ 300 dpi Minimum module size [in units of 300 dpi] 2D Symbols ANSI Grade D Orientation or higher ANSI Grade C or higher Plain Paper Matte Paper Synthetic Glossy Paper Glossy Film High Glossy Paper QR Code - 7 4 5 5 5 5 Micro QR -
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 100
    01" in the beginning of data.  You do not need to add a check digit in the data.  Printing the 2D symbol with a composite symbol is supported. When printing the 2D symbol with a composite symbol, use "\|" or "|\" to separate the barcode data from the data for the composite symbol. First enter data
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 101
    " on page 92.  Printing the 2D symbol with a composite symbol is supported. When printing the 2D symbol with a composite symbol, use "\|" or "|\" to 2D symbol. AztecCode  Both the full range mode and the compact mode are supported. How to Print Open print data file in an application, and specify 2D
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 102
    Printing Barcodes / 2D Symbols on .NET Environment Since .NET Framework supports only True Type fonts and Open Type fonts, barcode or 2D symbol fonts registered in the printer driver cannot be printed. To solve the problem, use the [Font Replacement] function of the printer driver to replace
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 103
    Chapter3 Handling Printing Barcodes/2D Symbols In the print data file, specify the True Type font that you replaced with the barcode or 2D symbol font, and specify the point and language.  The point of barcode or 2D symbol is predetermined. Check the point in the [Barcode and 2D Symbol Settings] on
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 104
    Chapter3 Handling Favorite Settings The Favorite Settings function allows you to register and manage print settings of the printer driver. Note that this function is completely different from the [Favorite Setting] available from the control panel of the printer, and they are not compatible with
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 105
    Chapter3 Handling Features  When printing from an application, the registered print settings can be set as default print settings. After you make print settings, click [Save as Favorite Setting] to register the print settings.  Many sets of print settings can be registered in [Favorite Settings].
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 106
    Chapter3 Handling 3 Enter a name of the settings in the [Name] field, and then click [Add]. The Save/Delete Favorite Setting screen is closed. Current Settings pane (1) (2) 4 Check that the name of the added print settings is displayed in the list of [Favorite Settings]. Registered in [Favorite
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 107
    Chapter3 Handling User Defined Information The following information is included in User Defined Information.  User-defined paper settings  Registered barcode font settings  Font replacement settings for .NET environment The user defined information is set on each client computer. If multiple
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 108
    2 Select the [Driver Utilities] tab. Click [Import/Export Settings]. Chapter3 Handling Export in a BSF file from the current settings. If you export it from the general setting, a different content will be exported.  Current Settings: Properties of the printer driver - [General] - [Printing
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 109
    Chapter3 Handling Importing Settings File When the BSF file is imported to the printer driver, the printer driver settings are overwritten with the imported settings. If you keep the following settings unchanged, create BSF files to include them.  List of Favorite Settings  List of user-defined
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 110
    Starting PrinterSetting from the Printer Driver Start PrinterSetting from the printer driver following the steps below. 1 Open the printer driver window. 2 Select the [Printer Utilities] tab. Click [Printer Settings]. Chapter3 Handling 3 The CW-C6XXX PrinterSetting screen appears. 110
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 111
    error occurs, it displays an error window. It is disabled by default. Enabling/Disabling EPSON Status Monitor 3 By default, EPSON Status Monitor 3 is disabled. Follow the procedure below to enable EPSON Status Monitor 3. 1 Turn the printer on. 2 Open the printer driver window. 3 Select the [Driver
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 112
    Chapter3 Handling 5 In the [EPSON Status Monitor 3 Settings] field on the [Driver Utilities] window, [EPSON Status Monitor 3] and [Monitoring Preferences] are displayed. 112
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 113
    error occurs during printing, the error information is displayed. IF an error occurs on the printer while it is not printing, EPSON Status Monitor 3 does not start.  You can start EPSON Status Monitor 3 anytime by clicking its icon on the task bar. For information on how to display the icon, refer
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 114
     You can set the following in the [Monitoring Preferences] settings. Display the EPSON Status Monitor 3 icon on the task bar. (See "Displaying the Icon" on page 116.) Chapter3 Handling 114
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 115
    Monitor 3 referring to "Enabling/Disabling EPSON Status Monitor 3" on page 111. 4 The Monitor Preferences window appears. Select the check boxes for the items that you want to be notified, and then click [OK]. Error: Communication Error: Ink Low: Service Required: Nozzle Clogged Warning: When
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 116
    Chapter3 Handling Displaying the Icon You can set to show the icon on the task bar, and check the printer status by clicking the icon. The icon is not displayed by default. Follow the procedure below to display the icon. 1 Turn the printer on. 2 Open the printer driver window. 3 Select the [Driver
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 117
    menu of [Print Quality] in [Media Settings].  The printer driver does not support printing a background image.  To print multiple print jobs in time order, disable print jobs may not be printed in time order.  When using Epson printer driver, do not change the control prefix, the format prefix,
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 118
    describes how to operate the printer driver for Mac. The printer driver is software to control the printer in accordance with the print instructions of application software. Setting the print settings in the printer driver screen enables you to obtain the best print results. Furthermore, you can
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 119
    3 Click [Show Details] (or ) on the bottom of the screen. Chapter3 Handling If page settings are not displayed in the print dialog, click the "page settings" option (e.g., Page Setup) in the File menu. 4 Check that this printer is selected, and then set the paper size. Select [Custom] to set a
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 120
    5 Click [+] to add a new set of paper size settings. Chapter3 Handling 6 Enter paper size and make the margin setting of the printer. Paper Size: Enter label size. Non-Printable Area: Enter "0" in all the left, right, top and bottom fields. 7 Click [Untitled] and enter a name for the custom size,
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 121
    to [No Saving]. Setting to the other option may cause the print position to shift. 2 Color Options This menu is enabled if you have selected [EPSON Color Controls] in the [Color Matching] menu. You can adjust color settings such as brightness and saturation. For more details, refer to the Help. For
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 122
    Chapter3 Handling 3 Extension Settings You can change the following settings; auto cut setting (the auto cutter model only), buzzer (notification) setting, pause setting, ink profile, ratio of black to composite, and ink drying time. For explanation of each setting, refer to the Help. CAUTION If
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 123
    driver dedicate for this printer in [Printer]. The dedicated printer driver is displayed as follows.  When connecting via USB EPSON CW-C6XXXX  When connecting via a network EPSON CW-C6XXXX-YYYYYY "XXXX" is the product model number. "YYYYYY" is the last six digits of the MAC address. Depending
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 124
    Chapter3 Handling Customizing the Printer Driver You can save frequently used sets of settings (paper size and other print settings) as Presets under a new name. This allows you to easily apply exactly the same settings repeatedly. Saving Settings as Preset 1 Make the paper size and other print
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 125
    Deleting from Presets 1 Click [Show Presets...] in [Presets] of the Print dialog box. Chapter3 Handling 2 Select the preset you want to delete, click [Delete], and then click [OK]. 125
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 126
    Label Printer Utility allows you to start EPSON Status Monitor, to run a nozzle check and print head cleaning, for this printer. 2 Click [Options & Supplies] - [Utility] - [Open Printer Utility]. 3 Epson Label Printer Utility starts. Click an icon of the function you want to use. The function window
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 127
    Chapter3 Handling Changing the Paper Source Setting To change the paper source setting (internal roll or external feed), select [Media Setting] of the Epson Label Printer Utility and change the [Media source] setting. 127
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 128
    paper settings, and make adjustments such as bi-directional printing adjustment. The work procedure is as follows. 1. Getting the Package (epson-inkjet-printer-cw-c6000c6500) (page 129) 2. Installing the Printer Driver (page 129) 3. Installing Input/Output Modules (page 129) 4. Adding the Printer to
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 129
    Printer Driver, Utilities, and Manuals" on page 327. Installing the Printer Driver Start a terminal software, and execute a command shown below. < Ubuntu 18.04> # dpkg -i epson-inkjet-printer-cw-c6000c6500_[Arch].deb # rpm -i epson-inkjet-printer-cw-c6000c6500_[Arch].rpm Installing Input
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 130
    Select the [Administration] tab, and then select [Add Printer]. Chapter3 Handling Follow the on-screen instructions. If you are prompted to enter a user name and password, enter "root" as a model name followed by "_USB" (2). (1) CUPS standard (2) Communication module for EPSON product (1) (2) 130
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 131
    methods to start the utility. ❏ Starting from a command line Execute a command shown below. $ /opt/epson/epson-label-printer-utility/elpuqt & ❏ Starting from Desktop Entry The operation method may vary by distribution, edition, flavors, and version. The following
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 132
    supported distribution and have not changed the default settings, installing dependent libraries is not necessary. If you have not installed default full package, Epson Epson install libqt5widgets5 Exiting Epson Label Printer Utility Epson Label Printer Utility]. Uninstalling Printer Driver, Epson
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 133
    Utility for Linux Start a terminal software, and execute a command shown below. < Ubuntu 18.04> # dpkg -P epson-label-printer-utility-community # dpkg -P epson-printer-io-community < CentOS 7> # rpm -e epson-label-printer-utility-community # rpm -e epson-printer-io-community Chapter3 Handling 133
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 134
    /6000 Series is not supported by default, ABAP driver information is required in addition to the Device Type. Details of files required for printing from a SAP system Epson provides the following files to enable SAP direct print; printing on CW-C6500/6000 Series directly from a SAP system.  Device
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 135
    Chapter3 Handling PrinterSetting (Windows) If you start PrinterSetting with user privileges, you may not be able to change the settings while the printer driver or other software is communicating with the printer. PrinterSetting is a utility that allows you to configure the printer settings. The
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 136
    Chapter3 Handling How to Start PrinterSetting Start PrinterSetting by following the steps below. 1 Turn the printer on. 2 Click [Start] - [EPSON] - [CW-C6XXX PrinterSetting]. 3 The Select printer window appears. Select a search target, and then click [Search]. 4 The printer is displayed in the list.
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 137
    5 PrinterSetting is started. Chapter3 Handling How to Apply Settings After you change the printer settings, click [Apply settings] to apply the changes to the printer. 137
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 138
    Media settings Allows you to make settings of paper to be used on the printer. This is not displayed if you start PrinterSetting from the printer driver. Chapter3 Handling Media detection settings Print settings Item Media source Media detection Media coating type Print Quality Description
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 139
    Chapter3 Handling Layout settings Allows you to change the paper layout settings and create a user-defined layout settings. This is not displayed if you start PrinterSetting from the printer driver. Layout settings Item Media layout Edit layout... Description Allows you to make paper layout
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 140
    Layout settings Chapter3 Handling Item Media layout name Defined media layout Media form Layout Information Description Allows you to set a name for a new paper layout settings. Enter a name to set. If one or more sets of user-defined paper layout settings already exist, they are listed here.
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 141
    from the leading edge of a continuous paper. Adjustment procedure U"Start adjustment" on page 142 Peel position adjustment (Manual) Allows you to adjust the manual label peeling position. (Peeler model only) Adjustment procedure U"Start adjustment" on page 142 Peel position adjustment (Auto
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 142
    Chapter3 Handling Start adjustment 1 The window shown below appears when you click [Start adjustment]. (The window is of Print start position adjustment (Vertical direction).) 2 Enter a value in the [Adjustment value] box, and then click [Apply settings]. 3 A confirmation window appears. If you
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 143
    Print results adjustment Allows you to adjust colors and barcode. This is not displayed if you start PrinterSetting from the printer driver. Chapter3 Handling Color preset Item Mode Ink profile Adjust barcode Ratio of black to composite Bar width adjustment Description Allows you to change the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 144
    Chapter3 Handling Store data in the printer Allows you to register images, templates, fonts, character code tables, and spot colors to the printer. Item Image (Only .png) Template Font (Only .ttf and .tte) Character code table Spot Color Setting Description You can register images to be used for
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 145
    Chapter3 Handling Registering Images You can register frequently used color images to the printer. Creating a background image 1 Prepare an image file in PNG format that has resolution appropriate for printing by the printer. See "Product Specifications" on page 273. 2 Replace an image according
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 146
    file name of the template file. For more details about the commands, refer to the "Save label format" section in "ESC/Label Command Reference Guide". There is no prescribed file extension for the text or binary file. Registering Templates Click [Store...] in the [Template] field to display a screen
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 147
    code table] field, and then click [Select]. If you have replaced from a ZPL II compatible monochrome printer, a character code that CW-C6000/ C6500 Series do not support may be specified and the specified character code table may not be applied. In such case, select [Advanced settings] from the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 148
    .  Use this function when using the following software.  Windows driver from Zebra Technologies Corporation  A commercially available label printing application that supports this printer  An application that directly controls ZPL II or ESC/Label commands  This is not displayed if you start
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 149
    .  Windows driver from Zebra Technologies Corporation  A commercially available label printing application that supports this printer  An application that directly controls ZPL II or ESC/Label commands The Epson printer driver does not support printing a background image. Chapter3 Handling 149
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 150
    Chapter3 Handling Linking the Image and the Template CW-C6000/C6500 Series allows you to link an image to a template so that the image is printed being overlaid on the template automatically when the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 151
    Chapter3 Handling In the [Background image for each template] window, select a template and an image to be linked to the template, and then click [OK]. The link setting is set to the printer. 151
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 152
    Chapter3 Handling Print head maintenance Allows you to run a print head cleaning or nozzle check, and make settings for periodic cleaning. Item Description Print head maintenance Print head cleaning Runs a nozzle check and clears nozzle clogging. Click [Start] to run the cleaning. Power
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 153
    Printer settings Allows you to configure the printer settings. Chapter3 Handling Item Description Preferences Power on action Select a printer action when the printer is powered on. Paper replacement action Select a printer action when paper is replaced. Back Feed Sequence Select the back
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 154
    Print Head Alignment Allows you to adjust the print head. Chapter3 Handling Item Media Feed Adjustment Bi-directional Printing Adjustment Description Carry out this adjustment when white or black banding/streaks appear on printouts. Adjustment procedure U"Media Feed Adjustment" on page 155 Carry
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 155
    model, make sure to load paper correctly so that it matches the setting in [Settings for Paper Handling After Print].  For [Auto apply] or [Manual apply]: pass the paper through the peeler.  For [Rewind]: do not pass the paper through the peeler. Do not print adjustment sheet 1 Prepare print
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 156
    Chapter3 Handling 5 An adjustment start confirmation window appears. Click [Yes]. The second Media Feed Adjustment window appears. 6 In the same way as step 4, look at the print results and then select a setting value. 7 When adjustment is complete, a complete window appears. Click [OK]. 8 Print the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 157
    Chapter3 Handling 6 In the same way as step 4, look at the print results and then select a setting value. 7 An adjustment start confirmation window appears. Click [Yes]. 8 When adjustment is complete, a complete window appears. Click [OK]. Bi-directional Printing Adjustment When printed vertical or
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 158
    Chapter3 Handling 4 Check the sheet and then select the number for the pattern with the least gaps or overlapping in each of #1, #2, and #3 groups, and then click [OK]. Adjustment sheet print example (for this sheet, select "2" for #1 group, select "0" for #2 group, and select "2" for #3 group.) 5
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 159
    Panel settings Allows you to configure the panel settings. Chapter3 Handling Item Panel button settings Cancel button Feed button (Auto cutter model only) Cut button (Auto cutter model only) Peeler reset button (Peeler model only) LCD settings Description Select whether to enable or disable the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 160
    Operating Time Settings Allows you to change the power saving settings. Chapter3 Handling Item Power Saving Transition Time Settings Waiting time of back feed after label peeling (Peeler model only) Description Set a time period to let the printer enter into the power saving mode after completion
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 161
    Chapter3 Handling Nozzle check settings Allows you to change the nozzle check settings. For more details about the nozzle check, see "Nozzle Verification Technology Settings" on page 25, and for more details about the dot substitution function, see "Dot Substitution (Supplemental Printing) Function"
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 162
    Advanced settings Allows you to configure the advanced printer settings. Chapter3 Handling Item Calibration Replace settings from printer using ZPL II commands Replace settings from printer using ZPL II commands Set prefix text Set Printer's Favorite Settings External Interface settings
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 163
    Chapter3 Handling Settings for Replacing from ZPL II Compatible Monochrome Printer Click [Set...] for [Replace settings from printer using ZPL II commands] to open the setting window. When adjusting, make the adjustment checking actual printouts. Resolution Settings Select the resolution in the [
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 164
    Font Replacement Click [Settings] beside [Font replacement]. Chapter3 Handling When the setting window is displayed, select the font ID from the list box. 164
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 165
    With the font ID specified, select a registered font to be associated to the font ID. Chapter3 Handling Click [Add] to add the pair to the list in the window. Click [Confirmation] to save the list and go back to the "Replace settings from printer using ZPL II commands" window. Select the check box
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 166
    it on an application. Fix Character Code Table Select the check box for this item to print using character code table set on the CW-C6000/C6500 Series printer if an unsupported character code is specified. Applying the Settings When you have finished making necessary settings, click [Apply settings
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 167
    Chapter3 Handling Registering Favorite Settings 1 Click [New/Delete/Edit] in [Set Printer's Favorite Settings]. 2 The "Edit Printer's Favorite Settings" window appears. Click [New...]. 167
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 168
    Chapter3 Handling 3 The "Register Printer's Favorite Settings" window appears. Enter a name for the settings in the [Favorite Settings Name] box, and make the settings in [Printer's Favorite Settings]. When finished, click [Set].  For the favorite settings name, you can use up to 15 ASCII (20h to
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 169
    Chapter3 Handling Applying Favorite Settings Follow the procedure below to apply the registered favorite settings to the printer. 1 Click [Select the Favorite Settings] in [Set Printer's Favorite Settings]. 2 The "Select Printer's Favorite Settings" window appears. In the [Favorite Settings Name]
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 170
    Chapter3 Handling Initialize printer Allows you to initialize the printer. CAUTION When the printer is initialized using the [Initialize] menu, all image files and setting files you have registered are deleted. Initialize Item Factory reset Erase memory Description Returns the printer
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 171
    Printer information Displays information of the printer. Chapter3 Handling Item Printer information Printer settings list Maintenance counters Description Click [View...] to see the current settings of the printer. See "Printer settings list" on page 172. Allows you to check the maintenance
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 172
    Chapter3 Handling Printer settings list The "Printer settings list" window appears when you click [View...]. You can save the settings as a file by clicking [Output to file...]. 172
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 173
    Settings save and restore Allows you to save the settings of the printer and restore the saved settings. Chapter3 Handling Save settings Item Save data Save to folder File name Start saving Restore settings Backup file File data Start restoring Description Select setting items to save. Select
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 174
    Option A unit of length used in PrinterSetting and start up setting can be changed. Chapter3 Handling Display settings Startup Settings Item Units Display a welcome screen at startup Description Select a unit of length. Select whether to display welcome screen at startup. The [Units] setting is
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 175
    Paper Media Detect Gap Black Mark None Media Source Internal Rear Feed Media Form Roll Fanfold Media Layout Label Width CW-C6000 Series 21.4 to 108.0[mm]/ 0.84 to 4.25[inch] CW-C6500 Series 21.4 to 211.9[mm]/ 0.84 to 8.34[inch] Default Lock Setting General Printer Media Settings Settings Settings
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 176
    10.9[mm] / ±0.43[inch] Left Position ±1.5[mm] / ±0.06[inch] Paper Top Position Adjustment ±1.5[mm]/ ±0.06[inch] Left Margin CW-C6000 Series ±108.0[mm]/ ±4.25[inch] CW-C6500 Series ±211.9[mm] / ±8.34[inch] Media Size Notice On Off Maintenance Print Head Nozzle Check - Print Head Cleaning
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 177
    Chapter3 Handling Setting menu Settings Default Print Head Alignment Vertical Alignment - Horizontal Alignment Calibration Simple Media Detect - Media Detect Roll Media Tension Nozzle check settings Nozzle check settings On On Off Nozzle Check Interval 1to13000 [copies] 500 [copies
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 178
    Chapter3 Handling Setting menu Settings Error Notice Error Notice Off On Repeat Error Off Notice On Length Unit mm inch Sleep Timer Off On (1 to 240 min.) Circuit Breaker Interlock Startup On Off Date/Time Settings Date/Time - Daylight Saving Off Time On Time Difference +13:
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 179
    Chapter3 Handling Setting menu Settings Polski Português Español Türkçe Background Color Gray Black White Keyboard QWERTY AZERTY QWERTZ Control Panel Button Settings Cut (Auto cutter model only) Enable Disable Cancel Enable Disable Feed (Auto cutter model only) Enable Disable Peeler Reset (
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 180
    Prefix 0X20 to 7E Format Command Prefix 0X20 to 7E Delimiter Characters 0X20 to 7E Image Quality Color Adjustment Mode High Saturation No Adjustments Manual Color Adjustments Light -25 to +25 Saturation -25 to +25 Contrast -25 to +25 Tone -Cyan -25 to +25 Tone Magenta -25 to +25
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 181
    Chapter3 Handling Setting menu Settings Ink Profile Ratio of Black to Composite -6 to +4 (in increments of 1) -6 to 0 (in increments of 1) Dry Time 0 to 5 sec. (in increments of 0.1 sec.) Nozzle Verification Technology Enable Disable Bar Width Adjustment - 2 to +2 (in increments of 1)
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 182
    mm]/ ±0.425 [inch] Set Timing of Back Feed Back Feed Before Print Back Feed After Print Reprint Enable Disable Media Hold Pressure Auto Manual (1 to 10) Cancel Action Job ONLY Job/RAM Drive External I/O Settings End print signal Disable Signal Low level Enable High level Enable Low
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 183
    Chapter3 Handling Setting menu Settings Missing dot detected signal Disable Signal Low level Enable High level Enable Head maintenance signal Disable Signal Low level Enable High level Enable Printer ready signal Disable Signal Low level Enable High level Enable Warning signal Disable Signal Low
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 184
    Chapter3 Handling Setting menu Settings Paper end signal Disable Signal Low level Enable High level Enable Pause signal Ignore signal Execute at Low Head cleaning signal Ignore signal Execute at Low Missing dot check signal Ignore signal Execute at Low Feed signal Ignore signal Execute at Low
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 185
    Chapter3 Handling Setting menu Settings Default Actions on Power On Feed Not Feed Calibration Short Calibration Check Media Size Network Settings Network Status Wired LAN Status - Print Status Sheet - Connection Check - Advanced Device Name - TCP/IP - Proxy Server - IPv6
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 186
    Chapter3 Handling Setting menu Settings Disable IPsec/IP Filtering Disable - IEEE802.1X System Administration Clear Internal Memory Data Security Settings Admin Settings Admin Password Register Change Reset Lock Setting On Off General Settings On Off Printer Settings On Off
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 187
    Chapter3 Handling Setting menu Settings Roll Media - Tension All Settings - Language - Favorite Settings - Supply Status - Printer Status/Print Firmware Version - Print Status Sheet Configuration Status Sheet Font List - Barcode List - Image List - Template List - Network
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 188
    Setting function)" on page 211.  If a password has been set in the Admin Password setting, an authentication screen is displayed when WebConfig starts. Enter "epson" as the user name (the user name is fixed), and the password.  If the firmware version of the printer is other than TS05JC, TS06JC
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 189
    Chapter3 Handling How to Start WebConfig Start a web browser on a computer or device that is connected via a network, and then type the printer IP address into the browser. Enable the JavaScript on the browser. Because the communication with the printer uses a self-signed certificate of the printer
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 190
    RGB settings of the selected color, and write them down. The method to check the RGB settings differs by graphic software to another. See the manual or help of the software you use. 190
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 191
    print the samples. You can choose a target color and know its RGB settings on the printout. For more details, see "Color Tone Matching Assistant User's Guide". Color Tone Matching Assistant Example of the Sample Colors 3 Start PrinterSetting. ("How to Start PrinterSetting" on page 136) 191
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 192
    4 Select [Store data in the printer]. 5 Click [Create] button in the [Spot color table] field. Chapter3 Handling 6 Enter the original RGB settings and the target RGB settings. 192
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 193
    7 Click [Add]. The specified pair of RGB settings will be added in the box. Chapter3 Handling 8 Click [Confirmation]. A window to enter a name for the spot color setting is displayed. 9 Enter a name for the setting file, then click [OK]. 193
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 194
    Chapter3 Handling 10 When you select [OK] on a successfully saved dialog box, the [Created spot color list] window appears. If you want to copy the file to another location, click [Copy to another folder]. Creating spot color setting file is now complete. 194
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 195
    Chapter3 Handling Printing using the Spot Color Setting File 1 Open the printer driver window. 2 Select [Spot Color Settings] on the [General] window. 3 From the pull-down menu, select a spot color setting file you want to use. To change the folder to view, click [Update Spot Color List] and change
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 196
    Chapter3 Handling Color Correction There are the following three methods for color correction.  Setting on the printer  Setting using ICM of Windows OS  Setting using an application software According to which method you use, set [Color Correction Mode] of the printer driver as follows.  Setting
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 197
    Chapter3 Handling Saturation Item Color Adjustment Method Color Circle Slide Bar Description Lets you adjust saturation (vividness) of the entire image. When the saturation is increased, the feel of the vividness of the image is increased. The more the saturation is decreased, the more the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 198
    and [Print Quality] settings. Select this check box when using paper other than Epson genuine paper and you have installed an ICC profile for the paper. When the the paper type and print mode. CW-C6500/6000 Series offer you the ICC profiles for each Epson genuine paper covering all combinations of
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 199
    icc Speed Gloss CW-C6000Series_Synthetic_Speed.icc Matte CW-C6000Series_Synthetic_Speed_MK.icc Normal Gloss CW-C6000Series_Synthetic_Normal.icc Matte CW-C6000Series_Synthetic_Normal_MK.icc Quality Gloss CW-C6000Series_Synthetic_Quality.icc Matte CW-C6000Series_Synthetic_Quality_MK.icc
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 200
    .icc Quality Gloss CW-C6000Series_GlossyPaper_Quality.icc Matte CW-C6000Series_GlossyPaper_Quality_MK.icc Max Quality Gloss CW-C6000Series_GlossyPaper_MaxQuality.icc Matte CW-C6000Series_GlossyPaper_MaxQuality_MK.icc Glossy Film Normal Gloss CW-C6000Series_GlossyFilm_Normal.icc Matte
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 201
    for Creating an ICC Profile When using paper other than Epson genuine paper, acquire an ICC profile of the paper provided on the device and software used, the following describes the general procedure. See the manual that came with the device and software for more details. 1 Start a software program
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 202
    ] button is disabled when [Color Correction Mode] is set to [No composite]. Select [No composite] only when setting color correction on an application software. For instructions on how to set color correction on the software, see its
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 203
    Chapter3 Handling Printing from the First Label (Auto cutter model only) If the [Media Detect] setting has been set to [Gap], you cannot print on the first label (printed from the second label) at the first time printing after loading paper. However, for the auto cutter model, even when [Gap] is
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 204
    Setting Label Size and Paper Layout for Borderless Printing This section describes the concepts and settings methods for borderless printing using the Epson printer driver. With borderless printing, the print may extend onto the backing paper (liner) depending on the actual print position and
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 205
    Chapter3 Handling Borderless Printing Settings This section describes how to perform the borderless printing on the label described below.  Label size Width: 107.0 mm Height: 150.0 mm  The "User Defined Media Layout" settings on the printer driver Media Form: Die-cut Label (BlackMark) Follow the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 206
    Chapter3 Handling 4 Extend the print area. Set both the label width and label length to a value 3 mm larger than the actual size. 206
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 207
    Chapter3 Handling 5 Adjust the print position on the printer driver. Print start position adjustment (Vertical direction): -1.5 mm Print start position adjustment (Horizontal direction): Move to the left by 0.5 mm For more details, see "Position adjustment" on page 141. 207
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 208
    Chapter3 Handling Adjusting Sensitivity of the Detectors and Threshold for Detecting Labels The printer is equipped with two detectors; one detects leading edge of each label and another one detects black marks. If you have labels that cannot be detected by the printer, the labels may become
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 209
    Chapter3 Handling Adjusting Gap Detector When printing on odd-shaped labels such as circle or oval labels, adjust the gap detectors as described below. This adjustment is not required when using labels that are general in shape, such as square labels and full-page labels. 1 Remove paper from the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 210
    Chapter3 Handling Adjusting Label Detector for Circle Die-cut Labels (Example) Align the center of the circle die-cut label, which is shown by dotted line in the figure, with the adjustment tabs. Center of Circle Gap between Labels Position of the detector 210
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 211
    Chapter3 Handling Restricting Operation of the Operation Panel (Lock Setting function) The [Lock Setting] function allows an administrator to lock the paper settings, printer settings, and/or system administration related settings to prevent unauthorized changes. The procedure is as follows. 1. Set
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 212
    Chapter3 Handling Enabling the [Lock Setting] Function Set an administrator password in advance. 1 Select [Menu] - [General Settings] - [System Administration] - [Security Settings] [Admin Settings] in that order. 2 Set [Lock Setting] to [On]. Options that allow you to set which settings to lock are
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 213
    Chapter3 Handling Resetting the Administrator Password If you forgot the password, reset the password following the procedure below. 1 Hold down the Back button and the Cancel button at the same time. 2 When a confirmation message is displayed, select [Yes]. 3 Enter "1234", which is a password to
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 214
    216) 2 Cleaning the Peeler (Peeler Model Only)( Page 217) 3 Cleaning the Platen( Page 219) 4 Cleaning the Paper Pressure Roller ( Page 223) Rear 1 Cleaning the Edge Guides( Page 218) 2 Cleaning the Paper Feed Roller ( Page 220) 214
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 215
    Chapter3 Handling Cleaning the Exterior Turn off the printer, and then wipe off any dirt with a dry cloth or non-woven fabric that has been dampened. Make sure to unplug the printer when cleaning it. CAUTION Do not use alcohol, benzine, thinner, trichloroethylene, or ketone based solvent to clean
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 216
    Chapter3 Handling Cleaning the Auto Cutter (Auto Cutter Model Only) If labels, paper dust, or adhesive has adhered to the fixed blade of the auto cutter, the blade may become dull. Clean the fixed blade following the procedure below. Fixed blade 1 If paper has been loaded, remove it. ("How to
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 217
    Chapter3 Handling Cleaning the Peeler (Peeler Model Only) If labels, paper dust, or adhesive has adhered to the peeler, the print quality may decline. To maintain good print quality, it is recommended to clean the peeler every day. Clean the peeler following the procedure below. 1 Make sure the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 218
    , paper may get jammed, or printing position may become incorrect. Clean the edge guides following the procedure below. 1 Make sure the printer has been turned off. 2 Open the to Remove Paper (For the Peeler Model)" on page 63) 3 Clean the edge guides using a cotton swab moistened with alcohol. 218
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 219
    Chapter3 Handling Cleaning the Platen If labels, paper dust, or adhesive has adhered to the platen, paper may get jammed, or printing position may become incorrect. Clean the platen following the procedure below. 1 Make sure the printer has been turned off. 2 If paper has been loaded, remove it. ("
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 220
    Chapter3 Handling Cleaning the Paper Feed Roller If paper dust or adhesive has adhered to the paper feed roller, paper may get jammed, or faint or blurred image may be printed. Clean the roller following the procedure below. CAUTION When cleaning the paper feed roller, do not use a material other
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 221
    4 Raise the release lever. 5 Open the paper guide unit. Chapter3 Handling 6 Attach adhesive side of a label to the roller, and peel it off slowly. Repeat this action until paper dust or adhesive is
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 222
    Chapter3 Handling 7 Rotating the roller by hand, remove paper dust or adhesive from entire surface of the roller. 222
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 223
    Chapter3 Handling Cleaning the Paper Pressure Roller If paper dust or adhesive has adhered to the paper pressure roller, paper may get jammed, or faint or blurred image may be printed. Clean the roller following the procedure below. CAUTION When cleaning the paper pressure roller, do not use a
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 224
    4 Raise the release lever. Chapter3 Handling 5 Open the front cover. 6 Attach adhesive side of a label to the roller, and peel it off slowly. Repeat this action until paper dust or adhesive is completely removed from side to side of the roller. If some labels have stuck on the roller, carefully
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 225
    Chapter3 Handling Print Head Cleaning If the nozzles are clogged, faint colors, banding, or unintended colors appear on printouts. When such print quality problems occur, print nozzle check patterns and check for nozzle clogging. ("Test Print" on page 68) Example of the nozzle check patterns with
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 226
    Chapter3 Handling Using the Operation Panel [Menu] - [Maintenance] - [Print Head Cleaning] [Menu] - [Maintenance] - [Power Cleaning] Using the Printer Driver Click [Print Head Cleaning] or [Power Cleaning] on the [Printer Utilities] window. Using the WebConfig Select [Print Head Cleaning] on the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 227
    the ink cartridges, follow the procedure below. 1 Run the nozzle check to confirm that the print head nozzles are not clogging and there is no problem with the print quality. If the print quality is not good, run a print head cleaning. See"Test Print" on page 68 . CAUTION If you store
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 228
    to see if they are expired. Replace the ink cartridges with new ones in the following cases. For instructions on how to replace the cartridges, see "Installing the Ink Cartridges" on page 38.  Three years the print head nozzles are not clogging and there is no problem with the print quality. 228
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 229
    Chapter3 Handling For Transporting the Printer When transporting the printer, make sure to follow the guidelines below. CAUTION  The weight of the printer is approximately 26 kg. When lifting the printer, make sure to lift it by two people placing the hands at the dents on the printer. If you
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 230
    Troubleshooting Chapter3 Handling A message is displayed on the operation panel. Message ("Part Names and Functions" on page 19) Information Close the paper guide unit. The paper guide unit is open. Close the paper guide unit. ("Part Names and Functions" on page 19) Information Close the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 231
    Chapter3 Handling Message Information The fanfold paper is not loaded. Information Paper jam. Information The paper is not loaded correctly. Reload the paper. Information Calibration failed. Press the OK button. Then reload or replace the paper. Information The paper has already been cut and cannot
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 232
    breakdown of this product due to the use of non-genuine Epson products will not be free of charge even if the warranty " on page 41) (On the home screen) The Maintenance Box is nearing end of its service life. The maintenance box is near full. Prepare a new maintenance box to be replaced with
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 233
    paper jam or foreign materials near the ejection slot. 3. Turn the printer on. If the printer error still occurs, contact qualified service personnel for advice. When contacting, tell the person the "XXXXXXXX" (a 6- or 8-digit alphanumeric code). Information Device restarted due to a system error
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 234
    Chapter3 Handling Print Quality Problems Status Horizontal White Banding Vertical White Banding White or Black Banding Unintended Top and Bottom Margins are Generated Printed Characters Look Blurred Cause Solution The
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 235
    . ("Print Head Cleaning" on page 225) The edge guide is not set Check that the edge guide is properly set at the paper width along the paper ink. Depending on paper used, manual adjustment of the platen vacuum is required. Carry out the manual adjustment using the printer driver following the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 236
    not be fed into printer automatically. Feed the paper manually. ("Feeding Paper into the Printer Manually" on page 67) Paper is Fed and Ejected, Maintenance] [Calibration] - [Simple Media Detect] in that order. If the problem is not resolved, carry out [Media Detect]. The sensor has failed. If
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 237
    by adjusting the black mark detector. On the operation panel, select [Menu] - [Maintenance] [Calibration] - [Simple Media Detect] in that order. If the problem is not resolved, carry out [Media Detect]. The sensor has failed. If operation was normal up until now, the sensor has probably failed
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 238
    measures correspond to the error number. For instructions on how to print the report, see the DHCP server.  If you have set the printer's TCP/IP manually, the IP address is out of the valid range, such as devices on the same network? If there is no problem in the above checks, but the device or
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 239
    Chapter3 Handling A message is displayed on the computer screen If the following screen appears, resolve the problem following the instructions on the screen. Printer status Solution 239
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 240
    Chapter3 Handling Printing from a computer is impossible or becomes suddenly impossible Checking Whether the Printer Driver Is Installed Check whether or not the required software and applications are installed on the computer. To print with this printer, a printer driver is required. Check whether
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 241
    multiple times, copies of the printer driver may be created. If there is more than one printer icon and you find a copied one such as "CW-C6XXX (Copy 1)", right-click on the copied icon and then delete it by clicking Remove device. 3 Perform a test print to check whether or not the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 242
    ) button or the (back) Paper is jammed This section describes how to resolve the problem when the paper is jammed. Videos that show the procedure are also available. Click the URL below to view the videos. For the Auto Cutter Model 1 Cut the paper near the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 243
    3 If there are ripped pieces of paper on the platen, remove them. Chapter3 Handling 4 If the print head is not on the far right, hold it down and move it to the far right. If there is jammed paper on the position that the print head was stopped, remove it. 5 Raise the paper holder unit, and then
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 244
    7 Open the paper cover. Chapter3 Handling 8 Raise the release lever. 9 Pull the paper out from the paper feed slot. 10 Remove the spindle, if present. As shown in the figure, hold the spindle and flange with both hands, and remove them. 244
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 245
    , and then remove any jammed paper from the inside. 12 Close the paper guide unit. 13 Lower the release lever. 14 Close the paper cover. 15 Close the front cover. 16 Press the [Pause] button. The paper jam error
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 246
    For the Peeler Model 1 Open the peeler cover. Chapter3 Handling 2 Cut the paper near the paper ejection slot. 3 Open the front cover. 4 If there are ripped pieces of paper on the platen, remove them. 5 If the print head is not on the far right, hold it down and move it to the far right. If there
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 247
    Chapter3 Handling 6 Raise the paper holder unit, and then remove any jammed paper. Do not touch the roller at the bottom of the paper holder unit with your hand. Doing so may cause injury. ("Caution Label" on page 10) 7 Lower the paper holder unit. 8 Open the paper cover. 9 Raise the release lever.
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 248
    in the figure, hold the spindle and flange with both hands, and remove them. 12 Raise the paper guide unit, and then remove any jammed paper from the inside. 13 Close the paper guide unit. 14 Lower the release lever. 15 Close the paper cover. 16 Close the front cover. 17 Close
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 249
    the Use the printer driver. setup workflow described in chapter 2. Print using your application developed with reference to Epson Inkjet Label Printer SDK. Use the Epson Inkjet Label Printer SDK commands. Print using your application that directly controls ESC/Label Use the ESC/Label commands
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 250
    files and source files of the program that perform printing from Epson inkjet label printer using Epson Inkjet Label Printer SDK. For instructions on how to use the sample programs, see "Epson Inkjet Label Printer SDK User's Guide". Operating Environment OS Software Refer to the Appendix. Printer
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 251
    printer settings so that they match with the settings of the ZPL II compatible monochrome printer. Changing from Two-Step Printing to One-Step Printing CW-C6000/C6500 Series allow you to register an image file in png format to the printer, and print data sent from a host computer overlaying the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 252
    Chapter4 Information for Application Development One Step Printing Method with CW-C6000/C6500 Series Register the image Send monochrome print data Register the preprinted image as a background image The printer combines the registered image and the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 253
    Chapter4 Information for Application Development Changing Printer Settings and Replacing Printer Follow the flowchart below. Connect the printer to a computer that is used for making the settings ( Page 20, Page 43) USB Interface Connect the printer and the computer with a USB cable Ethernet
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 254
    the printer's USB ID to that of the old printer using USBInformationSetting. Follow the procedure below. 1 Click [Start] - [EPSON] - [CW-C6XXX Series] - [USBInformationSetting]. 2 USBInformationSetting is started. Select a replacement method, and then click [Next]. Item Replacement method Select
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 255
    Chapter4 Information for Application Development 3 Connect the old printer to the computer with a USB cable, and then turn on the printer. Click [Next]. 4 Information of the old printer is acquired. Then, disconnect the old printer from the computer. 5 Connect the new printer to the computer with a
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 256
    Chapter4 Information for Application Development 6 The window shown below is displayed when the settings were completed successfully. Click [Finish]. 7 Turn the printer off and then back on. 256
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 257
    Chapter4 Information for Application Development Setting the Printer Resolution and Monochrome Print Mode 1 Start PrinterSetting. 2 Select [Advanced settings] from the [Detailed settings] menus, then click [Set...] beside the [Replace settings from printer using ZPL II commands:] option. The "
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 258
    Chapter4 Information for Application Development 3 Select the resolution in the [Resolution of the printer in use:] pull-down menus. If the same resolution is not found in the menus, select one of the closest resolution. For example, if the resolution of the ZPL II compatible monochrome printer you
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 259
    Chapter4 Information for Application Development Registering a Background Image 1 Create an images to be used as a background image. Use an image-editing software, save the background image in png format. Make sure to set the image resolution to 600 dpi. 2 Start PrinterSetting. 3 On the [Store data
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 260
    Chapter4 Information for Application Development 5 On the [Background image settings] window, select the stored image to use in the [Set background image] field. 260
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 261
    II compatible monochrome printers have built-in fonts. CW-C6000/C6500 Series have Epson original built-in fonts and they are different from the built-in font, there may be differences in print results between CW-C6000/C6500 Series and ZPL II compatible monochrome printers. Example: Print results
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 262
    Chapter4 Information for Application Development Registering/Replacing Fonts 1 Start PrinterSetting. 2 On the [Store data in the printer] window, click [Store...] in the [Font (Only .ttf and .tte)] field. The "Store font" window appears. 262
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 263
    Chapter4 Information for Application Development 3 Specify the font file (TTF format) to be stored, and then click [Set]. The font file is sent to the printer and stored as a built-in font. 4 Select [Advanced settings] from the [Detailed settings] menus, then click [Set...] beside the [Replace
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 264
    Chapter4 Information for Application Development 5 On the [Replace settings from printer using ZPL II commands] window, click [Settings] beside [Font replacement]. 6 Select the font on the ZPL II compatible monochrome printer to be replaced by specifying the ID of the font. Select the ID from the
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 265
    Chapter4 Information for Application Development 7 Select a font to be associated to the font ID. 8 Click [Add] to add the pair to the list in the window. Click [Confirmation] to save the list and go back to the "Replace settings from printer using ZPL II commands" window. 265
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 266
    Chapter4 Information for Application Development 9 Select the check box for [Font replacement] to apply the font replacement settings. 10 Click [Apply settings]. The settings are sent and set to the printer. 266
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 267
    of objects, such as a text, barcode, graphic, and image, in a label. The setting can be changed in the range of -5.0 to + 5.0% in increments of 0.1%. If CW-C6000/C6500 Series prints labels in 200 dpi, which had been printed in 203 dpi by the ZPL II compatible monochrome printer, the objects are
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 268
    Chapter4 Information for Application Development Example when scaled down by 1.5% both vertically and horizontally with the positioning functions 1 Start PrinterSetting. 2 Select [Advanced settings] from the [Detailed settings] menus, then click [Set...] beside the [Replace settings from printer
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 269
    Chapter4 Information for Application Development 3 Select a value in each of the Vertical positioning and Horizontal positioning boxes. If you have set the same resolution as the resolution of the ZPL II compatible monochrome printer, set "0" (zero) to both the [Vertical positioning] and [Horizontal
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 270
    Chapter4 Information for Application Development 4 Adjust the font width. First set this to "100%", and then change it after checking actual print results. 5 Click [Apply settings]. The settings are sent and set to the printer. Printing Let the printer print under conditions where the printer is
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 271
    you can register the template to CW-C6000/ C6500 Series and use the command specifications, refer to the "ESC/Label Command Reference Guide". The procedure is as follows. 1 Register the image commands in the application so that the file is supported by the ESC/Label commands. The template specified by
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 272
    with the printer. Manual Name Description Providing Method Start Here Guides you through basic troubleshooting. Download this guide from the web site or, depending on the country or region, this is included in the supplied CD*. ("Downloading the Latest Version" on page 3)  Web  CD-ROM* CW
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 273
    25.4 mm 101.6 mm 203.2 mm 25.4 mm 101.6 mm 203.2 mm 25.4 mm 101.6 mm 203.2 mm 25.4 mm 101.6 mm 203.2 mm CW-C6000 Series CW-C6500 Series Serial inkjet, dot matrix method Four-color printing Forward and reverse friction feed Full cut (cuts paper completely) 300 × 600 dpi, 600
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 274
    OS X 10.6.8 or later Linux CentOS 7 (x86_64) Linux Ubuntu18.04 (x86_64) The following computer that runs one of the above operating systems must be supported. PC/AT compatible machine A computer that has Pentium 4 2 GHz or higher processor is recommended. 1 GB or more is recommended. At least 250 MB
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 275
    follows. Use the paper that is supported by the black ink you are using. If you use paper that is not supported by the black ink you are label surface immediately after printing, ink may adhere to your fingers. CW-C6000 Series Without perforation Paper Shape Form of Paper With (Label) black
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 276
    Appendix CW-C6500 Series Without perforation Paper Shape Form of Paper With (Label) black marks Without black marks Auto cutter model Roll Die-cut Page 292 Page
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 277
    Appendix CW-C6000 Series (4-inch auto cutter model) Roll Die-cut Label (Black Mark) Black mark width Backing paper width Paper feed direction
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 278
    Appendix Black mark position Each black mark should extends at least 18.4 mm from side edge baseline. Black mark width 18.4 mm or more Black mark length 4 to 25.4 mm, 4 mm or more of blank space on label Black mark interval*1 When auto cut is not used: 10 to 615.6 mm When auto cut is used:
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 279
    Roll Die-cut Label (without Black Mark) Backing paper width Paper feed direction Appendix Label length Gap between pages Cut position Gap between Labels Side edge baseline Waste part Form Backing paper width Label width Label length Gap between Labels Waste part on the left and right Label
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 280
    Appendix Roll paper Die-cut Label with perforation (Black Mark) Black mark width Backing paper width Paper feed direction Label length Black mark interval Black mark length Perforated line Cut position Gap between Labels Side edge baseline Center of black mark
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 281
    or cutouts cannot be used.  Auto cutting on the perforated lines will generate scraps of paper that may cause problems. Also, auto cutting ahead of the perforated line may cause problems when feeding paper. Therefore, perform auto cutting when paper is fed at least 0.8 mm away from the perforated
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 282
    Roll paper Die-cut Label with perforation (without black marks) Backing paper width Paper feed direction Label length Gap between pages Perforated line Cut position Appendix Gap between Labels Side edge baseline Waste part Form Backing paper width Label width Label length Gap between Labels
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 283
    or cutouts cannot be used.  Auto cutting on the perforated lines will generate scraps of paper that may cause problems. Also, auto cutting ahead of the perforated line may cause problems when feeding paper. Therefore, perform auto cutting when paper is fed at least 0.8 mm away from the perforated
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 284
    Roll paper Continuous Label (Black Mark) Black mark width Appendix Backing paper width Paper feed direction Black mark length Black mark interval Cut position Side edge baseline Center of black mark detector Form Backing paper width Label width Label length Gap
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 285
    Appendix Black mark interval*1 When auto cut is not used: 8 to 615.6 mm When auto cut is used: 15 to 615.6 mm *1: It is not allowed to have another black mark in the intervening space between the black marks (black mark interval).  Paper with holes or cutouts cannot be used.  Set the cut
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 286
    Roll paper Continuous label (without black marks) Backing paper width Paper feed direction Appendix Side edge baseline Waste part Form Backing paper width Label width Label length Gap between Labels Waste part on the left and right Label corner R Paper thickness Roll paper core inner diameter
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 287
    Black mark length Fanfold Die-cut Label (Black Mark) Black mark width Black mark interval Label length Appendix Backing paper width Paper feed direction Perforated line Cut position Gap between Labels Side edge baseline Center of black mark detector Form
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 288
    or cutouts cannot be used.  Auto cutting on the perforated lines will generate scraps of paper that may cause problems. Also, auto cutting ahead of the perforated line may cause problems when feeding paper. Therefore, perform auto cutting when paper is fed at least 0.8 mm away from the perforated
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 289
    Appendix CW-C6000 Series (4-inch peeler model) Roll Die-cut Label (Black Mark) Black mark width Backing paper width Paper feed direction Label
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 290
    Appendix Black mark width Black mark length Black mark interval 18.4 mm or more 4 to 25.4 mm, 4 mm or more of blank space on label When peeler is not used: 10 to 615.6 mm When peeler is used: 14.7 to 615.6 mm  Paper with holes or cutouts cannot be used.  Set the start position of the first
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 291
    Roll Die-cut Label (without Black Mark) Backing paper width Paper feed direction Appendix Gap between pages Label length Gap between Labels Waste part Form Backing paper width Label width Label length Gap between Labels Waste part on the left and right Label corner R Paper thickness Roll paper
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 292
    Appendix CW-C6500 Series (8-inch auto cutter model) Roll Die-cut Label (Black Mark) Black mark width Backing paper width Paper feed direction
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 293
    Appendix Black mark position Each black mark should extends at least 18.4 mm from side edge baseline. Black mark width 18.4 mm or more Black mark length 4 to 25.4 mm, 4 mm or more of blank space on label Black mark interval* 1 When auto cut is not used: 10 to 615.6 mm When auto cut is used:
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 294
    Roll Die-cut Label (without Black Mark) Backing paper width Paper feed direction Appendix Label length Gap between pages Cut position Gap between Labels Side edge baseline Waste part Form Backing paper width Label width Label length Gap between Labels Waste part on the left and right Label
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 295
    Appendix Roll paper Die-cut Label with perforation (Black Mark) Black mark width Backing paper width Paper feed direction Label length Black mark interval Black mark length Perforated line Cut position Gap between Labels Side edge baseline Center of black mark
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 296
    or cutouts cannot be used.  Auto cutting on the perforated lines will generate scraps of paper that may cause problems. Also, auto cutting ahead of the perforated line may cause problems when feeding paper. Therefore, perform auto cutting when paper is fed at least 0.8 mm away from the perforated
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 297
    Roll paper Die-cut Label with perforation (without black marks) Backing paper width Paper feed direction Label length Gap between pages Perforated line Cut position Appendix Gap between Labels Side edge baseline Waste part Form Backing paper width Label width Label length Gap between Labels
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 298
    or cutouts cannot be used.  Auto cutting on the perforated lines will generate scraps of paper that may cause problems. Also, auto cutting ahead of the perforated line may cause problems when feeding paper. Therefore, perform auto cutting when paper is fed at least 0.8 mm away from the perforated
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 299
    Roll paper Continuous Label (Black Mark) Black mark width Appendix Backing paper width Paper feed direction Black mark length Black mark interval Cut position Side edge baseline Center of black mark detector Form Backing paper width Label width Label length Gap
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 300
    Appendix Black mark length 4 to 25.4 mm, 4 mm or more of blank space on label Black mark interval*1 When auto cut is not used: 8 to 615.6 mm When auto cut is used: 15 to 615.6 mm *1: It is not allowed to have another black mark in the intervening space between the black marks (black mark
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 301
    Roll paper Continuous label (without black marks) Backing paper width Paper feed direction Appendix Side edge baseline Waste part Form Backing paper width Label width Label length Gap between Labels Waste part on the left and right Label corner R Paper thickness Roll paper core inner diameter
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 302
    Black mark length Fanfold Die-cut Label (Black Mark) Black mark width Black mark interval Label length Appendix Backing paper width Paper feed direction Perforated line Cut position Gap between Labels Side edge baseline Center of black mark detector Form
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 303
    or cutouts cannot be used.  Auto cutting on the perforated lines will generate scraps of paper that may cause problems. Also, auto cutting ahead of the perforated line may cause problems when feeding paper. Therefore, perform auto cutting when paper is fed at least 0.8 mm away from the perforated
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 304
    Appendix CW-C6500 Series (8-inch peeler model) Roll Die-cut Label (Black Mark) Black mark width Backing paper width Paper feed direction Label
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 305
    Appendix Black mark width Black mark length Black mark interval 18.4 mm or more 4 to 25.4 mm, 4 mm or more of blank space on label When peeler is not used: 10 to 615.6 mm When peeler is used: 14.7 to 615.6 mm  Paper with holes or cutouts cannot be used.  Set the start position of the first
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 306
    Roll Die-cut Label (without Black Mark) Backing paper width Paper feed direction Appendix Label length Gap between pages Gap between Labels Waste part Form Backing paper width Label width Label length Gap between Labels Waste part on the left and right Label corner R Paper thickness Roll paper
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 307
    Printable Area Die-cut Label (Black Mark), Die-cut Label (without black marks) Backing paper width Paper feed direction Print start position Label length* Cut position Appendix Gap between labels* 2 to 6 mm Waste part 2.0 mm Label width* Waste part 2.0 mm Printable Area Label area Backing
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 308
    Continuous Label (Black Mark) Backing paper width Paper feed direction Label length* Print start position Cut position Appendix Gap between labels* 2 to 6 mm Waste part 2.0 mm Label width* Waste part 2.0 mm Printable Area Label area Backing paper Black mark position (Reverse side) * User
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 309
    Continuous Label Backing paper width Paper feed direction Cut position Print start position Appendix Label length* Gap between labels* 0 to 6 mm Waste part 2.0 mm Label width* Waste part 2.0 mm Printable Area Label area Backing paper Black mark position (Reverse side) * User setting items
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 310
    Appendix Electrical Specifications Item Power supply Rated voltage Rated current Power consumption* Operating Standby Power off CW-C6000 Series CW-C6500 Series Power supply through a power connector 100 to 240 V 0.9 A 100V: Average of approx. 39.4 W 230V: Average of approx. 38.6 W 100V:
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 311
    ) Can be stored at -20C by discharging ink in advance. 0 to 3000 m Auto cutter model: Approx. 55 dB Peeler model: Approx. 60 dB Based on Epson evaluation conditions. 311
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 312
    Overall Dimensions CW-C6000 Series ■ Printer Dimensions Auto cutter model  Width: 340 mm  Depth: 565 mm  Height: 326 mm Appendix [Unit: mm] 312
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 313
    Peeler model  Width: 340 mm  Depth: 565 mm  Height: 326 mm Appendix [Unit: mm] 313
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 314
    ■ When the cover is opened 1 Appendix [Unit: mm] 314
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 315
    ■ When the cover is opened 2 Appendix [Unit: mm] 315
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 316
    CW-C6500 Series ■ Printer Dimensions Auto cutter model  Width: 444 mm  Depth: 515 mm  Height: 326 mm Appendix [Unit: mm] 316
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 317
    Peeler model  Width: 444 mm  Depth: 515 mm  Height: 326 mm Appendix [Unit: mm] 317
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 318
    ■ When the cover is opened 1 Appendix [Unit: mm] 318
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 319
    ■ When the cover is opened 2 Appendix [Unit: mm] 319
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 320
    /SJIC35P-MK*/SJIC35P-C/SJIC35P-M/SJIC35P-Y CW-C6000Ae CW-C6000Pe CW-C6500Ae CW-C6500Pe SJIC36P-BK/SJIC36P-MK*/SJIC36P-C/SJIC36P-M/SJIC36P-Y CW-C6010A CW-C6010P CW-C6510A CW-C6510P SJIC36P-BK/SJIC36P-MK*/SJIC36P-C/SJIC36P-M/SJIC36P-Y CW-C6020A CW-C6020P CW-C6520A CW-C6520P SJIC37P-BK/SJIC37P-MK
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 321
    Appendix Maintenance Box Model number Type Storage temperature Transporting (without unpacking) Storage (without unpacking) Installed SJMB6000/6500 Maintenance box with integrated waste ink absorbing material -20 to 60°C (within 5 days when 60°C) -20 to 40°C (within 1 month when 40°C) -20 to 40
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 322
     When you want to reduce the down time as a result of roll paper replacement Model number:  Paper Holder C6000 (for CW-C6000 Series)  Paper Holder C6500 (for CW-C6500 Series) Item Dimensions (H x W x D) Weight Paper Holder C6000 220 x 206 x 220 mm 0.65 kg Paper Holder C6500 175 x 310 x 175
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 323
    Appendix Requirements for External Devices The printer is designed to print on roll paper fed from inside the printer or on fanfold paper fed from outside the printer. If you use an external paper feeder and/or paper rewinder with the printer, read this section carefully to know required settings
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 324
    Appendix Paper Tension The allowable values of tension applied to paper between the printer and a paper feeder or rewinder are as follows. Paper rewinder Paper feeder Paper tension at the feeder side (F1) Paper tension at the rewinder side (F2) 2N or less 2N or less c IMPORTANT If the paper
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 325
    Appendix Paper Angle for Feeding and Ejecting The allowable values of angle for feeding paper from a paper feeder (θ1) and for ejecting paper to a paper rewinder (θ2) are as follows. θ2 Paper rewinder θ1 Paper feeder Angle for paper feeding: θ1 Angle for ejecting paper: θ2 15° θ1 30° 0°
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 326
    Appendix Position of Paper Feeder and Paper Rewinder Place a paper feeder and paper rewinder so that paper is fed or ejected straight to/from the printer. If you find that paper is skewed before it reaches the printer or rewinder, adjust the position of the paper feeder or the paper rewinder. 326
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 327
    of the printer driver, utilities, and manuals can be downloaded from the following URLs. For customers in North America, go to the following web site: www.epson.com/support/ For customers in other countries, go to the following web site: www.epson-biz.com/ Label Print Applications Some commercially
  • Epson ColorWorks CW-C6000P | Technical Reference Guide - Page 328
    information: • Windows service operation / Normal EXE operation ❏ EPSON application status: EpsonNet WebManager / EpsonNet Log Browser / Epson Monitoring Tool / EpsonNet Simple Viewer / EpsonNet SDK for Windows / Printer Setting / Other (Application name) ❏ Phenomenon of the problem (or content
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
Technical Reference Guide
Describes features for the product.
Describes setup and installation of the product.
Describes how to control the printer and necessary
information when you develop applications.
Describes speciļ¬cations of the product.
Describes how to handle the product.
M00125302
Rev.C
Product Overview
Setup
Handling
Information for Application
Development
Appendix