Epson C823781 Administrator's Manual
Epson C823781 - EpsonNet Print Server Manual
 |
UPC - 010343822221
View all Epson C823781 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson C823781 manual content summary:
- Epson C823781 | Administrator's Manual - Page 1
instructions. Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. EPSON, EPSON Stylus, and EPSON - Epson C823781 | Administrator's Manual - Page 2
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular - Epson C823781 | Administrator's Manual - Page 3
Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: We: Epson America, Inc. Located at: MS 3-13 3840 Kilroy Airport Way Long Beach, CA 90806 that may cause undesired operation. Trade Name: EPSON Type of Product: Print Server Model: EU-44 iii - Epson C823781 | Administrator's Manual - Page 4
iv - Epson C823781 | Administrator's Manual - Page 5
Contents Introduction About Your Print Server 1 Important Safety Instructions 2 About This Guide 3 Warnings, Cautions, and Notes 3 Package Contents 4 Operating Environment 5 Supported Epson Printers 6 Features of the Print Server 7 Print Server Operation 8 About the Software 11 Terms and - Epson C823781 | Administrator's Manual - Page 6
Up the Print Server Connecting the Print Server to the Network 31 Installing EpsonNet WinAssist/MacAssist 33 For Windows 33 For Macintosh 34 Setting an IP Address Using EpsonNet WinAssist 36 Setting an IP Address Using EpsonNet MacAssist 42 Chapter 3 EpsonNet WinAssist Configuration Utility - Epson C823781 | Administrator's Manual - Page 7
the Print Server Using EpsonNet MacAssist EasySetup 90 Chapter 5 Installing the Printer Driver Windows Me/98/95 95 LPR printing 95 Internet printing (Windows 98/95 95 Internet printing (Windows Me 96 Microsoft Network Shared printing 97 Installing a printer driver 98 Using the NET USE - Epson C823781 | Administrator's Manual - Page 8
Installing a printer driver 121 Using the NET USE command 122 Macintosh 123 Mac OS 8.x to 9.x 123 Mac OS X 124 OS/2 125 LPR printing 125 NetBEUI printing 129 Chapter 6 Settings for NetWare Server Introduction to NetWare Settings 131 Supported systems 131 About modes 132 Instructions for - Epson C823781 | Administrator's Manual - Page 9
Requirements 172 Installing EpsonNet Direct Print 172 Setting Up Your Printer Using EpsonNet Direct Print 173 Adding a printer located in the same segment 174 Adding a printer beyond a router 175 Adding a printer from the Printers folder 177 Installing the printer driver 179 Configuring the - Epson C823781 | Administrator's Manual - Page 10
EpsonNet Internet Print 184 Setting Up Your Printer Using EpsonNet Internet Print 184 Windows 98/95 185 Windows NT 4.0 190 Status Alert Window 193 Chapter 10 EpsonNet WebAssist About EpsonNet WebAssist 195 Supported Web browser 195 About Web browser setting 196 Configuring the Print Server - Epson C823781 | Administrator's Manual - Page 11
the Online Guide 220 Chapter 12 Troubleshooting General Problems 221 Problems Specific to Your Network Environment 225 Windows Me/98/95 environment 225 Windows XP/Server 2003/2000/NT environment 226 Macintosh environment 227 NetWare environment 227 Initializing the Print Server 229 Appendix - Epson C823781 | Administrator's Manual - Page 12
Appendix B Specifications Print Server Specification 241 Regulatory Approvals 241 Reliability 242 Environmental 242 Network Software 242 Regulatory Approvals for AC Adapter A120H 243 Regulatory Approvals for AC Adapter A192H 244 Index xii - Epson C823781 | Administrator's Manual - Page 13
Introduction About Your Print Server The EpsonNet 10/100 Base Tx External Print Server is a print server that lets you connect an Epson printer equipped with a parallel interface directly to your network. Just attach the print server to your printer's parallel interface connector, and connect it - Epson C823781 | Administrator's Manual - Page 14
shock. Instead, immediately turn off the printer, unplug an AC adapter, and then contact your Epson dealer. Do not repair it yourself because this is dangerous. ❏ Do not disassemble or modify the print server unless specifically instructed in the guide. This could cause injury, electric shock - Epson C823781 | Administrator's Manual - Page 15
with "Supervisor" in this guide. ❏ The term "print server" refers to the EpsonNet 10/100 Base Tx External Print Server in this guide. ❏ Some screen shots in this guide may list a printer name other than your printer. This difference does not alter the instructions. Warnings, Cautions, and Notes - Epson C823781 | Administrator's Manual - Page 16
Manual (PDF-format manual) -- Adobe® Acrobat® Reader® (for Windows only) ❏ An AC adapter and cable c Caution: Only use the AC adapter shipped with this package to supply power to the print server. Note: You need to supply items such as a computer with an Ethernet network interface, an Epson printer - Epson C823781 | Administrator's Manual - Page 17
(Professional, Server) Windows NT® 4.0 with Support Pack 5 or higher Macintosh NetWare Version - - - - Mac OS X 10.x, 8.6 to 9.x 3.x 4.x/IntranetWare 5.x/6.0 Protocol TCP/IP (using EpsonNet Direct Print) IPP (using EpsonNet Internet Print) NetBEUI TCP/IP (using EpsonNet Direct Print) IPP NetBEUI - Epson C823781 | Administrator's Manual - Page 18
environment, you must set an IP address for the printer. Make sure the IP address is suitable for the segment; an incorrect IP address may generate unexpected dial-up. Supported Epson Printers The print server can be installed on most Epson printers with a parallel interface. 6 Introduction - Epson C823781 | Administrator's Manual - Page 19
Features of the Print Server ❏ Connects an Epson printer equipped with a parallel interface connector to the network. ❏ Supports multiple protocols, such as TCP/IP, NetWare, NetBEUI, AppleTalk, and IPP. ❏ Supports 100Base full duplex, 100Base half duplex, 10Base full duplex, and 10Base half duplex. - Epson C823781 | Administrator's Manual - Page 20
Print Server Operation The status lights and status sheet provide you with important information about the operation and configuration of the print server. RJ-45 connector DC-IN connector Status sheet button Status lights 8 Introduction - Epson C823781 | Administrator's Manual - Page 21
Flashing Print server status Initializing Error status Firmware update mode Ready (10M link) Receiving packets (10M link) Ready (100M link) Receiving packets (100M link) Status sheet button The first time you use the print server after installing or reinstalling it, turn on the printer while - Epson C823781 | Administrator's Manual - Page 22
sure to press and hold down the status sheet button on the print server for one to two seconds to print a status sheet. A status sheet provides important information about the print server, such as MAC address, printer settings, and the printer's current status. Press the status sheet button once to - Epson C823781 | Administrator's Manual - Page 23
configure the print server for TCP/IP, NetWare, MS Network, AppleTalk, IPP, and SNMP. See "About EpsonNet WebAssist" on page 195. ❏ EpsonNet Direct Print is a utility that enables TCP/IP printing for Windows Me, 98, or 95. See "About EpsonNet Direct Print" on page 171. ❏ EpsonNet Internet Print is - Epson C823781 | Administrator's Manual - Page 24
a TCP/IP application protocol for file transfer lpd - a TCP/IP remote printing protocol application Print queue - a location where a print job is stored as a file, until the print server sends the job to the assigned printer Protocol - a set of rules that control how data or information is exchanged - Epson C823781 | Administrator's Manual - Page 25
on page 33 for details. 5. Set an IP address for the print server using EpsonNet Win/MacAssist. Assign an IP address to the print server, using EpsonNet WinAssist or MacAssist. For Windows users, see "Setting an IP Address Using EpsonNet WinAssist" on page 36. For Macintosh users, see "Setting an IP - Epson C823781 | Administrator's Manual - Page 26
, see "EpsonNet MacAssist Configuration Utility" on page 77. 7. Select a printing method. Select a printing method appropriate for your network environment and operating system. If you are not sure, see "Selecting a Printing Method" on page 231 for details. 8. Install the printer driver. Install the - Epson C823781 | Administrator's Manual - Page 27
Chapter 1 Installing Components on Your Computer 1 1 About Installing Components on Your Computer 1 1 Before configuring the print server and printing from the computer, you need to install the necessary components (such as TCP/IP, NetBEUI, etc.) and assign an IP address and subnet mask 1 for - Epson C823781 | Administrator's Manual - Page 28
they are already installed, go to the next chapter. The following table lists the components required for configuring the print server with EpsonNet WinAssist. EpsonNet WinAssist's setting screens TCP/IP, AppleTalk, IPP, SNMP (IP trap) MS Network NetWare, SNMP (IPX trap) Necessary components TCP - Epson C823781 | Administrator's Manual - Page 29
Client for Windows NT version 4.50 when using the 1 following modes: NetWare 3.x/4.x Bindery Print Server mode, 1 NetWare 3.x Remote Printer mode, NetWare 4.x Bindery Remote Printer mode, and NetWare 4.x/5.x NDS Remote Printer mode. 1 The following table lists the components required for network - Epson C823781 | Administrator's Manual - Page 30
mask, etc. and then click OK. 5. Restart the computer. The necessary components are now installed. Go to the next chapter "How to Set Up the Print Server" on page 31. Windows XP For Windows XP, use the following procedure to install the necessary components. Note: ❏ The Windows XP CD-ROM may be - Epson C823781 | Administrator's Manual - Page 31
installed, go to the next chapter. 1 1 1 1 1 1 1 The following table lists the components required for configuring the print server with EpsonNet WinAssist. 1 EpsonNet WinAssist's setting screens TCP/IP, AppleTalk, IPP, SNMP (IP trap) Necessary components Internet Protocol (TCP/IP) 1 MS - Epson C823781 | Administrator's Manual - Page 32
mask, etc. and then click OK. 7. Restart the computer. The necessary components are now installed. Go to the next chapter "How to Set Up the Print Server" on page 31. 20 Installing Components on Your Computer - Epson C823781 | Administrator's Manual - Page 33
, use the following procedure to install the necessary components. 1 Note: 1 ❏ The Windows Server 2003 CD-ROM may be required during the installation. ❏ When using TCP/IP or IPP for printing, you need to set the IP 1 address, the subnet mask, and the default gateway of the computer. 1. Click - Epson C823781 | Administrator's Manual - Page 34
The following table lists the components required for configuring the print server with EpsonNet WinAssist. EpsonNet WinAssist's setting screens TCP/IP, AppleTalk, IPP, SNMP (IP trap) MS Network NetWare, SNMP (IPX trap) Necessary components Internet Protocol (TCP/IP) Internet Protocol (TCP/ - Epson C823781 | Administrator's Manual - Page 35
then click OK. 1 6. Restart the computer. The necessary components are now installed. Go to the next 1 chapter "How to Set Up the Print Server" on page 31. 1 Windows 2000 1 For Windows 2000, use the following procedure to install the necessary components. 1 Note: ❏ The Windows 2000 CD - Epson C823781 | Administrator's Manual - Page 36
. If they are already installed, go to the next chapter. The following table lists the components required for configuring the print server with EpsonNet WinAssist. EpsonNet WinAssist's setting screens TCP/IP, AppleTalk, IPP, SNMP (IP trap) MS Network NetWare, SNMP (IPX trap) Necessary components - Epson C823781 | Administrator's Manual - Page 37
Client for Windows NT version 4.50 when using the 1 following modes: NetWare 3.x/4.x Bindery Print Server mode, 1 NetWare 3.x Remote Printer mode, NetWare 4.x Bindery Remote Printer mode, and NetWare 4.x/5.x NDS Remote Printer mode. 1 The following table lists the components required for network - Epson C823781 | Administrator's Manual - Page 38
, etc. and then click OK. 6. Restart the computer. The necessary components are now installed. Go to the next chapter "How to Set Up the Print Server" on page 31. Windows NT 4.0 For Windows NT 4.0, use the following procedure to install the necessary components. Note: ❏ The Windows NT 4.0 CD-ROM may - Epson C823781 | Administrator's Manual - Page 39
installed, go to the next chapter. 1 1 1 1 1 1 1 The following table lists the components required for configuring the print server with EpsonNet WinAssist. 1 EpsonNet WinAssist's setting screens TCP/IP, AppleTalk, IPP, SNMP (IP trap) Necessary components TCP/IP 1 MS Network NetWare - Epson C823781 | Administrator's Manual - Page 40
, and NetWare 4.x/5.x NDS Remote Printer mode. The following table lists the components required for network printing. Printing method LPR or Internet printing Microsoft Network Shared printing Printing via NetWare server Necessary components Protocols menu: TCP/IP Services menu: Microsoft TCP/IP - Epson C823781 | Administrator's Manual - Page 41
and then click Add. Select NetBEUI from the list and then click OK. Select the Services tab and then click Add. Select 1 Workstation from the list and then click OK. For printing via NetWare server: 1 Download the latest Novell Client from the Novell website 1 and install it on the computer - Epson C823781 | Administrator's Manual - Page 42
select Ethernet or Built-in Ethernet on the AppleTalk Control Panel. Then configure the print server with EpsonNet MacAssist. In OS X, AppleTalk must be enabled and EPSON AppleTalk must be selected in Print Center. Mac OS 8.6 to 9.x 1. From the Apple menu, select Control Panel, and then Appletalk - Epson C823781 | Administrator's Manual - Page 43
using EpsonNet WinAssist/ MacAssist to assign an IP address to the print server. 2 2 Connecting the Print Server to the Network 2 Follow the steps below to connect the print server to the network. w 2 Warning: Before you install or uninstall the print server, be sure to turn off the printer and - Epson C823781 | Administrator's Manual - Page 44
, it will use the private IP address of 192.168.192.168. ❏ Do not connect the print server and the computer directly. Be sure to use a hub to connect the print server to the network. 4. Turn the printer on. 5. Plug the AC adapter's power cord into a grounded electrical outlet. Then connect it to the - Epson C823781 | Administrator's Manual - Page 45
of EpsonNet 2 WinAssist. Operating systems Windows Me/98/95 2 Windows XP Professional/Home Edition Windows Server 2003 2 Windows 2000 Server/Professional Windows NT 4.0 Server/Workstation with Service Pack 5.0 or higher 2 Hard disk drive space 10 MB 2 How to Set Up the Print Server 33 - Epson C823781 | Administrator's Manual - Page 46
-click SETUP.EXE on the CD-ROM. 3. Select Install EpsonNet WinAssist, then click . 4. Follow the on-screen instructions to complete the installation. For Macintosh Install EpsonNet MacAssist on your Macintosh to configure the print server. System requirements The following table lists the system - Epson C823781 | Administrator's Manual - Page 47
EasySetup icon, is created in the Applications folder. 2 Mac OS X: The EpsonNet MacAssist OSX x.xx folder, which contains the EpsonNet MacAssist for OS X icon and the EpsonNet MacAssist OSX EasySetup icon, is created in the 2 Applications folder. 2 2 How to Set Up the Print Server 35 - Epson C823781 | Administrator's Manual - Page 48
computer. ❏ Make sure the printer is turned on. ❏ The computer to use for the following steps must be in the same segment as the print server. ❏ The sample screens are taken from Windows 98 using EpsonNet WinAssist. Other systems may differ in appearance, but the instructions are the same, except as - Epson C823781 | Administrator's Manual - Page 49
button can be used only if a valid IP address is assigned to the printer. 2 ❏ The print server does not have a default IP address. Be sure to assign a valid IP address manually or by using the DHCP server. 2 3. Click the TCP/IP tab. Note: 2 For information on other menus, see "Details - Epson C823781 | Administrator's Manual - Page 50
operating system's online help for detailed instructions. ❏ If the Dynamic DNS function is not supported, we recommend that you select Manual and enter an IP address. If you select Automatic, the IP address of the print server changes every time you turn on the printer, and you need to change the - Epson C823781 | Administrator's Manual - Page 51
if you want to make 2 extended settings, such as Dynamic DNS and Universal Plug and Play functions. Note: 2 The check boxes are dimmed if the print server does not support the function. 2 2 2 2 2 2 2 How to Set Up the - Epson C823781 | Administrator's Manual - Page 52
and the domain name using the DHCP server. If you want to enter manually, enter the host name and the support the Universal Plug and Play function. 13. After changing the settings, click OK. 14. In the TCP/IP dialog box, click OK. The Password dialog box appears. 40 How to Set Up the Print Server - Epson C823781 | Administrator's Manual - Page 53
the on-screen instructions. After the update is 2 complete, refresh the configuration by selecting Refresh from the View menu. c 2 Caution: Since it takes 2 or 3 minutes to send new settings to the print server, wait until an on-screen message appears to indicate that you can turn off your printer - Epson C823781 | Administrator's Manual - Page 54
Setting an IP Address Using EpsonNet MacAssist This section explains how to use EpsonNet MacAssist to configure the print server. Note: ❏ Make sure the printer is turned on. ❏ The computer to use for the following steps must be in the same segment as the print server. ❏ Make sure that Ethernet is - Epson C823781 | Administrator's Manual - Page 55
. ❏ The Launch Browser button can be used only if a valid IP 2 address is assigned to the printer. 2 ❏ The print server does not have a default IP address. Be sure to assign a valid IP address manually or by using the DHCP server. 3. Click the TCP/IP tab. 2 Note: ❏ TCP/IP is not used for - Epson C823781 | Administrator's Manual - Page 56
operating system's online help for detailed instructions. ❏ If the Dynamic DNS function is not supported, we recommend that you select Manual and enter an IP address. If you select Automatic, the IP address of the print server changes every time you turn on the printer, and you need to change the - Epson C823781 | Administrator's Manual - Page 57
if you want to make 2 extended settings, such as Dynamic DNS and Universal Plug and Play functions. Note: 2 The check boxes are dimmed if the print server does not support the function. 2 2 2 2 2 2 2 How to Set Up the - Epson C823781 | Administrator's Manual - Page 58
and the domain name using the DHCP server. If you want to enter manually, enter the host name and the support the Universal Plug and Play function. 13. After changing the settings, click OK. 14. In the TCP/IP dialog box, click OK. The Password dialog box appears. 46 How to Set Up the Print Server - Epson C823781 | Administrator's Manual - Page 59
2 Password and set the password. For more information on passwords, see "About Password" on page 89. 2 c Caution: Sending new settings to the print server can take 2 or 3 minutes. Wait until the update is complete before turning off 2 your printer. 2 2 2 2 2 2 2 2 2 How to Set Up the - Epson C823781 | Administrator's Manual - Page 60
48 How to Set Up the Print Server - Epson C823781 | Administrator's Manual - Page 61
to configure the print server for TCP/IP, NetWare, MS Network, AppleTalk, IPP, and SNMP. 3 Note: ❏ Be sure to use EpsonNet WinAssist included on the Software CD-ROM shipped with this product. 3 3 ❏ EpsonNet WinAssist installed on Windows XP/Server 2003 does not support NetBEUI as a search - Epson C823781 | Administrator's Manual - Page 62
. ❏ Launch Browser Starts EpsonNet WebAssist to configure the print server you have selected. EpsonNet WebAssist is a utility that runs on a browser. ❏ Quit Quits EpsonNet WinAssist. View menu: ❏ Refresh Updates to the latest information by searching for the available printers again. Tool menu - Epson C823781 | Administrator's Manual - Page 63
You can update the firmware and EpsonNet WebAssist. See the EpsonNet WinAssist online help for detailed information. Help menu: 3 ❏ Help Topic Opens EpsonNet WinAssist help. 3 ❏ About EpsonNet WinAssist Displays the copyright and version information for EpsonNet WinAssist. 3 Timeout option - Epson C823781 | Administrator's Manual - Page 64
the Select All radio button to search for print servers with all the available connections and protocols, or select the Select Individually radio button to select the preferred connections and protocols. Select Refresh from the View menu or restart EpsonNet WinAssist for the settings to take effect - Epson C823781 | Administrator's Manual - Page 65
Search options 3 Search Options-IP To search for print servers in other segments, set the specific 3 network address and the subnet mask. The settings you modified on this screen do not affect the search parameters used for EpsonNet WinAssist EasySetup. 3 Select Refresh from the View menu or - Epson C823781 | Administrator's Manual - Page 66
. Search Options-IPX When you manage the print server with IPX (NetWare), and when you want to configure the print server outside of the local network, set the network address of the print server. Select Refresh from the View menu or restart EpsonNet WinAssist for the settings to take effect. Note - Epson C823781 | Administrator's Manual - Page 67
List, and then click Add to add the address to Search Addresses (up to 256 addresses). 3 Removes the selected address from the Search Addresses list. 3 3 EpsonNet WinAssist Configuration Utility 55 - Epson C823781 | Administrator's Manual - Page 68
. Since the firmware update function is for support purposes, usually you do not need to use this function. See the EpsonNet WinAssist online help for detailed information. Details of the Configuration Dialog Box Information The Information menu shows the various print server parameters as described - Epson C823781 | Administrator's Manual - Page 69
a status sheet. 3 Hardware Hardware version of the print server Version Software Version Software version of the print server 3 Model Name Product name of the printer attached to the print server 3 Location Enter the location of the print server. Return to Default button Reverts to the - Epson C823781 | Administrator's Manual - Page 70
TCP/IP To use the printer in the TCP/IP environment, configure the print server using the following screen. 58 EpsonNet WinAssist Configuration Utility - Epson C823781 | Administrator's Manual - Page 71
supported, we 3 recommend that you select Manual and then enter an IP address. This is because if you select Automatic, the IP address of the print server changes every time you turn on the printer the IP address by EpsonNet WebManager. Enter an IP address for the print server. Be sure 3 that - Epson C823781 | Administrator's Manual - Page 72
Extended Settings dialog box When you click the Extended Settings button on the TCP/IP menu, the following dialog box appears. 60 EpsonNet WinAssist Configuration Utility - Epson C823781 | Administrator's Manual - Page 73
box if you want to acquire the DNS server address using the DHCP server. To enter the DNS server address manually, 3 clear this check box. If the DNS is not supported, this check box is dimmed. Displays the DNS server address. To enter the 3 DNS server address, click the Add button. To edit - Epson C823781 | Administrator's Manual - Page 74
. ❏ You cannot assign the print queue if you have not logged in to the bindery or NDS in the same mode you have selected for Mode. Print Server mode To use the printer in the Print Server mode, configure the print server using the following screen. 62 EpsonNet WinAssist Configuration Utility - Epson C823781 | Administrator's Manual - Page 75
Note: When you save the settings, the Printer Objects, named PR0 for the Bindery mode or print server name_P0 for the NDS mode, are 3 automatically created. To change the printer name, use PCONSOLE or NWADMIN. 3 3 3 3 3 3 3 3 3 3 3 EpsonNet WinAssist Configuration Utility 63 - Epson C823781 | Administrator's Manual - Page 76
Server Name Print Server Name Print Server Password Print Server Password (again) Polling Interval Print Queue Configuration button Explanations Select this check box when using NetWare. When you use the printer print queue settings. If you have assigned the queue with PCONSOLE, NWAdmin, or EpsonNet - Epson C823781 | Administrator's Manual - Page 77
Displays the queue name that is assigned to 3 the print server by browsing the queue. Click the Browse button to select a queue. You can also create or delete a queue. 3 Lists the print queues. Adds a print queue. 3 Removes a print queue. 3 EpsonNet WinAssist Configuration Utility 65 - Epson C823781 | Administrator's Manual - Page 78
to select it. ❏ Creating a queue For Bindery mode: Click the file server where you want to create a queue. Right-click it, and then SYS volume of the file server. If you want to create a queue in another volume, use PCONSOLE or NWAdmin. ❏ Deleting a queue Select the print queue you want to delete - Epson C823781 | Administrator's Manual - Page 79
mode 3 To use the printer in the Remote Printer mode, configure the print server using the following screen. 3 3 3 3 3 3 3 Items Use NetWare Mode Frame Type 3 Explanations Select this check box when using NetWare. When you use the printer only in the NetWare environment, 3 it turns - Epson C823781 | Administrator's Manual - Page 80
). Enter the printer port number. For NDPS Gateway, enter the same printer number you have set for NetWare (between 0 and 254). MS Network To use the printer in the Microsoft network environment, configure the print server using the following screen. 68 EpsonNet WinAssist Configuration Utility - Epson C823781 | Administrator's Manual - Page 81
print server name (up to 15 characters). Be sure to give a unique name that does not cause 3 conflicts with any other device on the network. Workgroup Name Enter the workgroup name or domain name used for the Windows network environment (up to 15 3 characters). Share Name Enter the printer - Epson C823781 | Administrator's Manual - Page 82
AppleTalk To use the printer in the AppleTalk environment, configure the print server using the following screen. Note: To configure AppleTalk settings using EpsonNet WinAssist, the following conditions must be maintained; ❏ The print server must be assigned a valid IP address. ❏ You have logged in - Epson C823781 | Administrator's Manual - Page 83
printer's entity type. Do not change the entity type unless "epson" appears. If "epson" 3 appears, select an entity type by clicking the Entity Setting button to match your printer. Ink specify the Manual Mode network number, if you have selected Manual. 3 3 3 3 3 EpsonNet WinAssist - Epson C823781 | Administrator's Manual - Page 84
the print server does not support the SNMP, all of the items are dimmed. Items IPP URL Explanations Displays the printer's URL for Internet Printing. Format: http://IP address of print server:631/ printer name set below Example: http://192.168.100.201:631/EPSON_IPP_Printer 72 EpsonNet WinAssist - Epson C823781 | Administrator's Manual - Page 85
to use for Internet 3 Printing (up to 127 characters). Example: EPSON_IPP_Printer 3 Enter the name of the printer's physical location (up to 64 characters). 3 SNMP 3 You can use the SNMP menu to set the SNMP information. 3 3 3 3 3 3 3 3 EpsonNet WinAssist Configuration Utility 73 - Epson C823781 | Administrator's Manual - Page 86
up to 32 characters). Enable or Disable IP trap 1, 2, or both. Enter the IP address of the server to which the trap is transmitted. Enter the community name (up to 32 characters). Enable or Disable IPX . Enter the community name (up to 32 characters). 74 EpsonNet WinAssist Configuration Utility - Epson C823781 | Administrator's Manual - Page 87
is sent to the print server, enter the old password immediately after changing the password. 3 ❏ If you forget your password, you need to initialize the print server. See "Initializing the Print Server" on page 229 for 3 instructions. 3 3 3 3 EpsonNet WinAssist Configuration Utility 75 - Epson C823781 | Administrator's Manual - Page 88
76 EpsonNet WinAssist Configuration Utility - Epson C823781 | Administrator's Manual - Page 89
the print server for TCP/IP, AppleTalk, and IPP. Note: ❏ Be sure to use EpsonNet MacAssist included on the Software CD-ROM shipped with this product. 4 4 ❏ Currently, EPSON printers use AppleTalk in OS 8.6 to 9.x, and EPSON AppleTalk in OS X for printing (except for the EPSON Stylus Photo 2200 - Epson C823781 | Administrator's Manual - Page 90
you have selected. ❏ Launch Browser Starts EpsonNet WebAssist to configure the print server you have selected. EpsonNet WebAssist is a utility that runs on a browser. ❏ Refresh Updates to the latest information by searching for the available printers again. ❏ Timeout Setting Set the timeout value - Epson C823781 | Administrator's Manual - Page 91
network printers. Therefore, change this value only if necessary. Select Refresh from the Device menu or restart EpsonNet 4 MacAssist for the settings to take effect. 4 4 4 Network path search setting 4 4 You can select the connection and protocols to use to search for a print server. You - Epson C823781 | Administrator's Manual - Page 92
Select Use this method to select search zones to search for a print server in a specific zone. Clear the check box if the print server is in the same zone; this saves time in searching. The zones . Select Refresh from the Device menu or restart EpsonNet MacAssist for the settings to take effect. 80 - Epson C823781 | Administrator's Manual - Page 93
you modified on 4 this screen do not affect the search parameters used for EpsonNet MacAssist EasySetup. Select Use the search option to search for a print server in 4 another segment. Do not select it if the print server you want to configure is located in the same segment. 4 Enter the network - Epson C823781 | Administrator's Manual - Page 94
print server parameters as described below. Parameters MAC Address Hardware Version Software Version Explanations Unique hardware address of the print server. You can check the MAC address on a status sheet. Hardware version of the print server Software version of the print server 82 EpsonNet - Epson C823781 | Administrator's Manual - Page 95
print server to their defaults. 4 Search Path Protocol used to search for the print server OK Updates the settings. 4 Cancel Cancels any changes. 4 TCP/IP 4 To use the printer in the TCP/IP environment, configure the print server using the following screen. 4 4 4 4 4 4 4 EpsonNet - Epson C823781 | Administrator's Manual - Page 96
: If the Dynamic DNS function is not supported, we recommend that you select Manual and then enter an IP address. If you select Automatic, the IP address of the print server changes every time you turn on the printer so that you need to change the printer port setting accordingly. Select this check - Epson C823781 | Administrator's Manual - Page 97
box if you want to acquire the DNS server address using the DHCP server. To enter the DNS server address manually, clear this check box. If the DNS is not 4 supported, this check box is dimmed. Displays the DNS server address. To enter the DNS server address, click the Add button. 4 To edit - Epson C823781 | Administrator's Manual - Page 98
name from the DHCP server. Enter the host name supported by the Dynamic characters of the domain name supported by Dynamic DNS. The to the DNS server through the DHCP server that supports Dynamic DNS. server. Enables or disables Universal Plug and Play. It is dimmed if this function is not supported - Epson C823781 | Administrator's Manual - Page 99
AppleTalk 4 To use the printer in the AppleTalk environment, configure the print server using the following screen. 4 4 4 4 4 4 4 Items Use AppleTalk Printer Name Zone Name Explanations 4 Select this box when using AppleTalk. Enter the name of the printer (up to 32 characters). 4 Select - Epson C823781 | Administrator's Manual - Page 100
the network number. Automatic is usually preferred. Enter a value between 0 and 65534 to specify the network number, if you have selected Manual. IPP To use the printer in the IPP environment, configure the print server using the following screen. 88 EpsonNet MacAssist Configuration Utility - Epson C823781 | Administrator's Manual - Page 101
IPP URL Displays the printer's URL for Internet Printing. Format: 4 http://IP address of print server:631/ printer name set below Example: 4 http://192.168.100.201:631/EPSON_IPP_Printer Printer Name Enter the name of the printer to use for Internet Printing (up to 127 characters - Epson C823781 | Administrator's Manual - Page 102
Print Server Using EpsonNet MacAssist EasySetup You can also use EpsonNet MacAssist EasySetup to configure the print server for TCP/IP and AppleTalk printing. Note: ❏ Currently, EPSON printers don't support TCP/IP printing in a Macintosh environment (except for the EPSON Stylus Photo 2200 and Stylus - Epson C823781 | Administrator's Manual - Page 103
4 If the same printer model name appears several times on the list, you 4 can identify the printers by checking their MAC addresses, which are found on the status sheet. 4 4 4 4 4 5. Change the printer name if necessary. Click Next. 4 4 4 4 4 EpsonNet MacAssist Configuration Utility 91 - Epson C823781 | Administrator's Manual - Page 104
to step 8.) 7. Select a method for specifying the IP address. If you select Automatic, DHCP becomes available and assigns an IP address automatically. If you select Manual, enter the IP address. Click Next. 92 EpsonNet MacAssist Configuration Utility - Epson C823781 | Administrator's Manual - Page 105
-screen instructions. After the update is complete, refresh the configuration by selecting Refresh from the Device menu. c Caution: Sending new settings to the print server can take 2 or 3 4 4 minutes. Wait until the update is complete before turning off your printer. 4 4 4 EpsonNet MacAssist - Epson C823781 | Administrator's Manual - Page 106
94 EpsonNet MacAssist Configuration Utility - Epson C823781 | Administrator's Manual - Page 107
/95 does not support LPR, standard TCP/IP printing cannot be used. However, you can print via 5 TCP/IP using the EpsonNet Direct Print utility included on the 5 Software CD-ROM. First, install EpsonNet Direct Print. Then, install the printer driver. See "About EpsonNet Direct Print" on page 171 - Epson C823781 | Administrator's Manual - Page 108
URL of the printer, and then click Next. http://IP address of print server:631/printer name Example: http://192.168.100.201:631/EPSON_IPP_Printer Note: The printer name portion of the URL is case sensitive. 5. See "Installing a printer driver" on page 98 to install the printer driver. 96 Installing - Epson C823781 | Administrator's Manual - Page 109
following in the Network path or queue name box. 5 \\NetBIOS name of print server\Device name of print server 5 5 5 5 5 5. The Add Printer wizard appears. Click Next. 5 6. See "Installing a printer driver" on page 98 to install the printer driver. 5 5 Installing the Printer Driver 97 - Epson C823781 | Administrator's Manual - Page 110
driver radio button. 8. Click Finish and follow the on-screen instructions to complete the setup. When you print using Microsoft Network Shared printing in the Windows XP/Server 2003/2000/NT environment, see "Using the NET USE command" on page 99 for more details. 98 Installing the Printer Driver - Epson C823781 | Administrator's Manual - Page 111
name of print server Selecting the port 5 1. Click Start, point to Settings, and then select Printers. 2. Right-click the printer icon and select Properties. 5 5 3. Click the Details tab and select the port you have set with the NET USE command. 5 5 5 5 Installing the Printer Driver 99 - Epson C823781 | Administrator's Manual - Page 112
XP, the printer driver installation procedure differs depending on the printing method you prefer. LPR printing 1. Click Start, click Control Panel, click Printers and Other Hardware, and then click Printers and Faxes. 2. Under Printer Tasks, click Add a printer to start the Add Printer wizard, and - Epson C823781 | Administrator's Manual - Page 113
4. Select the Create a new port radio button, then select Standard TCP/IP Port from the list. Then click Next. 5 5 5 5 5 5 5. Enter the IP address of the print server, then click Next. 5 5 5 5 5 5 Installing the Printer Driver 101 - Epson C823781 | Administrator's Manual - Page 114
If an error occurs, the following dialog box appears: 6. Select the Standard radio button, then select EPSON Network Printer. Click Next. 102 Installing the Printer Driver - Epson C823781 | Administrator's Manual - Page 115
See "Installing a printer driver" on page 105 to install the 5 printer driver. 5 Internet printing 1. Click Start, click Control Panel, click Printers and Other 5 Hardware, and then click Printers and Faxes. 2. Under Printer Tasks, click Add a printer to start the Add 5 Printer wizard, and - Epson C823781 | Administrator's Manual - Page 116
the on-screen instructions to set up the printer. See "Installing a printer driver" on page 105 if necessary. Microsoft Network Shared printing 1. Click Start, click Control Panel, click Printers and Other Hardware, then click Printers and Faxes. 2. Under Printer Tasks, click Add a printer to start - Epson C823781 | Administrator's Manual - Page 117
name of print server\Device name of print server 5 6. Follow the on-screen instructions to set up the printer. See "Installing a printer driver" below if necessary. 5 Installing a printer driver 5 1. Insert the Software CD-ROM shipped with the printer. 2. Close the EPSON Installation Program - Epson C823781 | Administrator's Manual - Page 118
and enter the following command: NET USE printer port: \\NetBIOS name of print server\Device name of print server Selecting the port 1. Click Start, click Control Panel, click Printers and Other Hardware, and then click Printers and Faxes. 2. Right-click the printer icon and then select Properties - Epson C823781 | Administrator's Manual - Page 119
Windows Server 2003 5 For Windows Server 2003, the printer driver installation 5 procedure differs depending on the printing method you prefer. LPR printing 5 1. Click Start, and then click Printers and Faxes. 2. Double-click the Add Printer icon to start the Add Printer wizard, then click Next - Epson C823781 | Administrator's Manual - Page 120
The Add Standard TCP/IP Printer Port Wizard dialog box appears. 5. Click Next. 6. Enter the IP address of the print server, and then click Next. 108 Installing the Printer Driver - Epson C823781 | Administrator's Manual - Page 121
radio button, then select EPSON Network Printer. Click Next. 5 8. Click Finish. 9. See "Installing a printer driver" on page 111 to install the 5 printer driver. Internet printing 5 1. Click Start, then click Printers and Faxes. 5 2. Double-click the Add Printer icon to start the Add - Epson C823781 | Administrator's Manual - Page 122
configuration page. http://IP address of printer:631/Printer name Example: http://192.168.100.201:631/EPSON_IPP_Printer Note: The printer name portion of the URL is case sensitive. 6. Follow the on-screen instructions to set up the printer. See "Installing a printer driver" on page 111 if necessary - Epson C823781 | Administrator's Manual - Page 123
name of print server\Device name of print server 6. Follow the on-screen instructions to set up the printer. See 5 "Installing a printer driver" on page 111 if necessary. 5 Installing a printer driver 1. Insert the Software CD-ROM shipped with the printer. 5 2. Close the EPSON Installation - Epson C823781 | Administrator's Manual - Page 124
name of print server\Device name of print server Selecting the port 1. Click Start, and then click Printers and Faxes. 2. Right-click the printer icon and then select Properties. 3. Click the Ports tab and then select the port you have set with the NET USE command. 112 Installing the Printer Driver - Epson C823781 | Administrator's Manual - Page 125
2000 5 For Windows 2000, the printer driver installation procedure differs depending on the printing method you prefer. 5 LPR printing 5 1. Click Start, point to Settings, then select Printers. 2. Double-click Add Printer to start the Add Printer wizard, 5 then click Next. 5 3. Click - Epson C823781 | Administrator's Manual - Page 126
4. Select the Create a new port radio button, then select Standard TCP/IP Port from the list. Click Next. 5. Enter the IP address of the print server, then click Next. 114 Installing the Printer Driver - Epson C823781 | Administrator's Manual - Page 127
radio button and then select EPSON Network Printer. Click Next. 5 7. Click Finish. 8. See "Installing a printer driver" on page 117 to install the 5 printer driver. Internet printing 5 1. Click Start, point to Settings, then select Printers. 5 2. Double-click Add Printer to start the Add - Epson C823781 | Administrator's Manual - Page 128
Next to browse for a printer radio button. 5. Enter the following in the Name box or click Next to browse for a printer. \\NetBIOS name of print server\Device name of print server 6. Follow the on-screen instructions to set up the printer. See "Installing a printer driver" on page 117 if necessary - Epson C823781 | Administrator's Manual - Page 129
. 5 8. Click Finish and follow the on-screen instructions to complete the setup. 5 When you print using Microsoft Network Shared printing in the Windows XP/Server 2003/2000/NT environment, see "Using the NET USE command" on page 118 for more details. 5 5 5 Installing the Printer Driver 117 - Epson C823781 | Administrator's Manual - Page 130
name of print server\Device name of print server Selecting the port 1. Click Start, point to Settings, then select Printers. 2. Right-click the printer icon, then select Properties. 3. Click the Ports tab, then select the port you have set with the NET USE command. 118 Installing the Printer Driver - Epson C823781 | Administrator's Manual - Page 131
of the print server in the first text box and the printer name (use the print server name on the status sheet) in the second text box. Click OK. 5 5 5 7. In the Printer Ports dialog box, click Close. 5 8. In the Add Printer Wizard dialog box, click Next. Installing the Printer Driver 119 - Epson C823781 | Administrator's Manual - Page 132
to configure from the Shared Printers list. If you cannot select the printer, enter the following in the Printer box: \\NetBIOS name of print server\Device name of print server 5. Click OK. 6. Follow the on-screen instructions to set up the printer. See "Installing a printer driver" on page 121 if - Epson C823781 | Administrator's Manual - Page 133
button. 5 8. Click Finish and follow the on-screen instructions to complete the setup. 5 When you print using Microsoft Network Shared printing in the Windows XP/Server 2003/2000/NT environment, see "Using the NET USE command" on page 122 for more details. 5 5 Installing the Printer Driver 121 - Epson C823781 | Administrator's Manual - Page 134
and select Properties. Click the Services tab and check that Server or Workstation is listed. 2. If it is not installed, click Add. 3. Run the command prompt and enter the following command: NET USE printer port: \\NetBIOS name of print server\Device name of print server Selecting the port 1. Click - Epson C823781 | Administrator's Manual - Page 135
below to set a printer. Note: 5 Make sure that the printer driver is installed on your Macintosh before 5 following the steps below. See the manual shipped with your printer for instructions on how to install the printer driver. Mac OS 8.x to 9.x 5 AppleTalk printing 5 1. Open Chooser from - Epson C823781 | Administrator's Manual - Page 136
1. Open the Application folder. 2. Open the Utilities folder. 3. Open Print Center, and then click Add. 4. Select EPSON TCP/IP from the drop-down list. 5. Select the printer from the drop-down list. 6. Select All from Page Setup drop-down list. 7. Click Add. 124 Installing the Printer Driver - Epson C823781 | Administrator's Manual - Page 137
OS/2 Warp 3 and 4 (OS/2 Warp Connect and OS/2 Warp Server). 5 LPR printing 5 5 1. Double-click the OS/2 system folder, then the System Setup folder, and then double-click the TCP/IP Configuration icon. 5 5 5 2. Click the Printing tab. 5 5 5 5 5 Installing the Printer Driver 125 - Epson C823781 | Administrator's Manual - Page 138
3. Enter the IP address of the print server in the Remote print server box and the name of the remote print server's printer in the second text box. Enter a value of 1 or greater in the Maximum number of LPD ports box. 4. Click the Autostart tab. 126 Installing the Printer Driver - Epson C823781 | Administrator's Manual - Page 139
5. Select lprportd from the Services to autostart list. Check the 5 Autostart service check box, and select the Detached radio button. 5 5 5 5 5 6. Save the settings you made in the TCP/IP Configuration 5 dialog box, and restart your computer. 5 5 5 5 5 Installing the Printer Driver 127 - Epson C823781 | Administrator's Manual - Page 140
the Printer icon. 4. Select Properties from the control menu, then click the Output Port tab. 5. From the Output Port list box, select one from \PIPE\LPD0 to \PIPE\LPDn (where n is the maximum number of LPD ports). The \PIPE\LPD -Settings dialog box will appear. 128 Installing the Printer Driver - Epson C823781 | Administrator's Manual - Page 141
the printer from the command line. 5 Example: Connect the printer to LPT1. 5 net use LPT1: \\NetBIOS name of print server\ Device name of print server Note: To change the NetBIOS name and device name, use EpsonNet 5 WinAssist or WebAssist running on Windows. Installing the Printer Driver 129 - Epson C823781 | Administrator's Manual - Page 142
130 Installing the Printer Driver - Epson C823781 | Administrator's Manual - Page 143
6 This chapter explains how to configure the print server for 6 NetWare. First, you need to set up the printer in a NetWare environment, and then configure the print server using EpsonNet WinAssist. Supported systems 6 ❏ Server environment 6 NetWare 3.1/3.11/3.12/3.2 (Bindery) NetWare 4.1/4.11 - Epson C823781 | Administrator's Manual - Page 144
either the Print Server, Remote Printer, or Standby mode. We recommend that you use the Print Server mode unless the number of users exceeds the limit. Features of these modes are described below. Print Server mode (NDS/Bindery Print Server): ❏ High-speed printing with direct printing ❏ Uses the - Epson C823781 | Administrator's Manual - Page 145
Instructions for Using NetWare 6 Printing a text file When you print from NetWare 4.x or later; however, the print server does not support NLSP. RIP/SAP controls the communication. 6 . 6 ❏ You cannot use the bindery print server mode with EpsonNet 6 WinAssist if you are running Novell Client - Epson C823781 | Administrator's Manual - Page 146
takes up to two minutes for the NetWare server to recognize the print server, after the printer is turned on. During this start-up time, the status sheet does not show the correct information. Frame type The same frame type should be used for the NetWare server and IPX router on the same network. If - Epson C823781 | Administrator's Manual - Page 147
instructions on using the print server in the Print Server mode on NetWare 3.x/4.x/IntranetWare with Bindery emulation. 6 6 Note: The print server in the Print Server mode of NetWare 3.x does not allow you to use the Print Server status display control with PCONSOLE. 1. Turn on your printer - Epson C823781 | Administrator's Manual - Page 148
instructions for using the print server in the Print Server mode on NetWare 4.x, IntranetWare, NetWare 5.x, or NetWare 6.0 with NDS mode. 1. Turn on your printer. 2. From any NetWare client, log in to the target context of the NDS tree as an ADMIN. 3. Configure the print server using EpsonNet - Epson C823781 | Administrator's Manual - Page 149
Mode (NetWare 3.x) 6 For NetWare 3.x users, follow the steps below to make the printer environment with PCONSOLE. 6 Creating print queues in a file server 1. From any NetWare client, log in to the network with 6 supervisor privileges. 6 2. Run PCONSOLE. From the Available Options screen - Epson C823781 | Administrator's Manual - Page 150
for later use. 3. From the Print Server list, select the print server name that you just typed and press Enter. From the Print Server Information list, select Print Server Configuration and press Enter. 4. Select Printer Configuration from the Print Server Configuration Menu and press Enter. 138 - Epson C823781 | Administrator's Manual - Page 151
screen, type the printer name. Highlight Type and press Enter. Select Remote Parallel, LPT1 for Remote Printer mode. 6 6 6 6 6 Note: 6 Be sure to select Remote Parallel, LPT1 for Remote Printer mode. 7. Press Esc; then press Enter to save your changes. Settings for NetWare Server 139 - Epson C823781 | Administrator's Manual - Page 152
. Configuring for NetWare using EpsonNet WinAssist 1. Turn on your printer. 2. Load the print server from the file server's system console which the print queue volume is set. >LOAD PSERVER print server name you set using PCONSOLE 3. Configure the print server using EpsonNet WinAssist. See "NetWare - Epson C823781 | Administrator's Manual - Page 153
6 Follow the steps below to make the printer environment on NetWare 4.x and IntranetWare with Bindery emulation. 6 Note: ❏ Assign Trusteeships for users if necessary. 6 6 ❏ Be sure to use PCONSOLE to set the print queue and print server instead of using NWAdmin. Creating objects 6 1. From - Epson C823781 | Administrator's Manual - Page 154
Polled for Interrupts; and check Manual load (Remote from Print Server) for Connection type, then click OK. 14. Click OK in the Printer dialog box. 15. To assign the printer, double-click the Print Server object icon (created in step 4). The Print Server dialog box appears. 16. Click Assignments - Epson C823781 | Administrator's Manual - Page 155
assigned, double-click the Print Server object icon. Click Print Layout, and check that the print server, printer, and print queue are connected. Configuring for NetWare using EpsonNet WinAssist 6 1. Turn on your printer. 6 2. Load the print server from the file server's system console which the - Epson C823781 | Administrator's Manual - Page 156
Mode (NetWare 4.x/5.x/6.0) Follow the steps below to make the printer environment using NWAdmin under NetWare 4.x, IntranetWare, NetWare 5.x, or an ADMIN. 2. Run the Administrator tool (NWAdmin). 3. Create a printer: Click the directory context icon, and select Create from the Object menu, then - Epson C823781 | Administrator's Manual - Page 157
select the Print Queue Volume, then click Create. Double-click the print queue object, and register the user. 6 Note: Since your clients need the print queue name you set here when they use the printer, announce the print queue name to your clients. 6 6 6 6 6 Settings for NetWare Server 145 - Epson C823781 | Administrator's Manual - Page 158
6. Double-click the Printer Object icon in the NetWare Administrator screen. 7. In the Printer dialog box appears, click Assignments and then click Add. 8. From the print queue list, select the queue you created in step 5 and click OK. 146 Settings for NetWare Server - Epson C823781 | Administrator's Manual - Page 159
9. Click Configuration, and select Other/Unknown for the Printer type list box and click OK. 6 6 6 6 6 6 10. Double-click the Print Server Object icon in the NetWare Administrator screen. 6 6 6 6 6 6 Settings for NetWare Server 147 - Epson C823781 | Administrator's Manual - Page 160
in step 11, and click the Printer Number button to set the printer number from 0 to 254. 14. To confirm the objects you have assigned, double-click the Print Server object icon. Click Print Layout, and check that the print server, printer, and print queue are connected. 148 Settings for NetWare - Epson C823781 | Administrator's Manual - Page 161
for NetWare using EpsonNet WinAssist 1. Turn on your printer. 6 2. Load the print server from the file server's system console which the print queue volume is set. 6 >LOAD PSERVER print server name you set using NWAdmin 3. Configure the print server using EpsonNet WinAssist. See 6 "NetWare - Epson C823781 | Administrator's Manual - Page 162
the NDPS Gateway This section contains instructions on printing using Novell Distributed Print Services® (NDPS®) with Novell® NetWare® 5.x/6.0. Novell Distributed Print Services (NDPS) is the new generation print services of NetWare. Note: ❏ Download the EpsonNet NDPS Gateway if it's not bundled - Epson C823781 | Administrator's Manual - Page 163
and Clients. 6 2. Create an NDPS Manager object in NetWare Administrator. 3. Create a Printer Agent in NetWare Administrator. 6 4. Configure the print server using EpsonNet WinAssist. 6 5. Set the printer on the client workstations. 6 The environment to use, the settings you make, and the - Epson C823781 | Administrator's Manual - Page 164
sure they install NDPS. 4. Install printer drivers on client workstations. See the printer manual for the installation. Note: ❏ Do not install the printer drivers via the NetWare server. ❏ Do not add printers and do not install printer drivers using Novell Print Manager (NWPMW32.EXE). Creating an - Epson C823781 | Administrator's Manual - Page 165
an NDS object. Users can select and print to any public access printer they can view from their workstations. However, these printers do not take full advantage of services such as security and job event notification. 6 ❏ Controlled Access Printers: NDPS printers that are added to the NDS tree - Epson C823781 | Administrator's Manual - Page 166
the print server uses in legacy queue-based print services (either in Print Server mode or Remote Printer mode). Queue User Name: Type a user name who has rights for the above queue. Password: Enter the password that the Queue User uses to login to the server. 6. Select None for the Printer Driver - Epson C823781 | Administrator's Manual - Page 167
Agent List button. Check that the status of the Printer Agent you have just created is "Idle". 6 Note: If you have selected Remote (rprinter on IPX), configure the print server using EpsonNet WinAssist, as described in the next section, and then print a status sheet. 6 Go to the next section if - Epson C823781 | Administrator's Manual - Page 168
Click OK. The printer driver for that printer model is installed automatically from the Resource Management Service. 6. Click Close. The printer appears in the main Printer Manager window and is available for print jobs. Installing printers manually 1. Install the printer driver. 2. Change the Ports - Epson C823781 | Administrator's Manual - Page 169
6 Instructions for Using a Dial-Up Network 6 This section explains about using a dial-up network. 6 Note: The primary server described in this manual indicates a primary time server which offers time to the workstations on the network. 6 Using a dial-up network in each mode 6 Print Server - Epson C823781 | Administrator's Manual - Page 170
file servers: Printer File server Dial-up router Local network Dial-up router Primary file server (primary print server) Remote network ❏ When the power is turned on A dial-up is generated because access is made to a local file server first and then to a primary server. There is no problem - Epson C823781 | Administrator's Manual - Page 171
on the local network is restored, the print server is also automatically restored. 6 For local networks with no file server: Printer Dial-up router Dial-up router 6 Primary file server (primary print server) 6 Local network Remote network 6 6 Depending on the router settings, the NetWare - Epson C823781 | Administrator's Manual - Page 172
problems are common to both Print Server mode and Remote Printer mode. Primary file server (primary print server) Dial-up router Printer Local network Dial-up router File server (print server) Remote network ❏ When the power is turned on Since access is made only to the primary server - Epson C823781 | Administrator's Manual - Page 173
how to set up the printer for different UNIX systems using the lpr command. 7 Your printer supports many standard UNIX commands and printing protocol, or standard ftp (file transfer protocol). Note: Because this printer does not convert data into the printer control 7 language, a printer driver - Epson C823781 | Administrator's Manual - Page 174
to the same Ethernet remote host, and each is given a different local printer name to be redirected. Different types of print jobs may be sent to different printer names, which will then all print out on the same printer, through the same Ethernet interface, but using different filters. The remote - Epson C823781 | Administrator's Manual - Page 175
22.33.44.55 HOSTNAME 7 2. Define the host name as a print server. For example: 7 lpsystem -t bsd HOSTNAME 3. Create the printer. 7 For example: lpadmin -p Rprinter -s HOSTNAME\aux-T unknown-1 7 any 4. Enable the printer for use. 7 For example: accept Rprinter enable Rprinter 7 5. To - Epson C823781 | Administrator's Manual - Page 176
. For example: mkdir\var\spool\lpd\PRIFx 3. Add the printer entry to the \etc\printcap file. For example: Rprinter | ALCXXXX:lp=:rm=HOSTNAME:rp=aux:sd=/var/spool/lpd /PRIFx 4. To print, use the lpr command. For example: lpt -s -PRPrinter Print-File-Name c Caution: Files that exceed 1 MB may not - Epson C823781 | Administrator's Manual - Page 177
) in: "Manage Remote Printer" 7 "Client Services" "Remote Printer Queues" "NAME of queue to add". 7 Set the host name (for example: HOSTNAME) in: 7 "DESTINATION HOST for remote jobs". Set the port name (for example: aux) in: 7 "Name of QUEUE on remote printer". 4. To print, use the lpr - Epson C823781 | Administrator's Manual - Page 178
: 22.33.44.55 HOSTNAME 2. Terminate the printer service. For example: lpshut 3. Create a printer. For example: lpadmin -pRPrinter -v/dev/null -mrmodel -ormHOSTNAME -orpaux 4. Restart the print service. For example: lpshed 5. Enable the printer for use. For example: accept Rprinter enable Rprinter - Epson C823781 | Administrator's Manual - Page 179
Setting up for SCO UNIX 4.2 or later (Open Server) 7 In the following steps, substitute the name that your printer will be known by for HOSTNAME, and the name by which you want your printer to be known for Rprinter. 7 1. Add the IP address and host name to the /etc/hosts file. For example: 7 - Epson C823781 | Administrator's Manual - Page 180
RLP extended function (valid when the print server is SCO-UNIX) will not be used. For example: If HOSTNAME currently runs SCO OpenServer Release 5 or above, it can support the extended remote line printer protocol. Do you want to turn on the "extended RLP protocol" support flag? If you are not sure - Epson C823781 | Administrator's Manual - Page 181
common for all UNIX 7 systems. 7 The following is an example of printing using the ftp command (the entry operations are underlined). ftp> open 22 55 7 Connected to 22.33.44.55 220 PR-Ifx(22.33.44.55) ftp server ready. 7 Name: 7 331 Password Required for (No Name). Password: 7 230 User - Epson C823781 | Administrator's Manual - Page 182
170 Settings for UNIX - Epson C823781 | Administrator's Manual - Page 183
can search both a printer located in the same segment and one located beyond a router. You 8 can select from LPR standard printing, LPR extension printing, or High-speed printing. Note: Since Windows XP/Server 2003/2000/NT support standard LPR 8 printing, EpsonNet Direct Print is not necessary - Epson C823781 | Administrator's Manual - Page 184
the CD-ROM drive. 2. The EPSON Installation Program screen opens automatically. If the Installer dialog box does not appear, double-click SETUP.EXE on the CD-ROM. 3. Select Install EpsonNet Direct Print, and then click . 4. Follow the on-screen instructions to complete the installation. 5. Restart - Epson C823781 | Administrator's Manual - Page 185
✽ with software version 1.x and EPL-N2700/N4000 printers enables EPSON TCP/IP printers. These EPSON TCP/IP printers can coexist with lpr printers added by EpsonNet Direct Print. 8 ❏ Job control functions such as Cancel Printing and Purge Print 8 Jobs are available when you double-click the - Epson C823781 | Administrator's Manual - Page 186
located in the same segment Follow the steps below to add a printer located in the same segment. 1. Windows Me: Double-click the My box and click OK. 4. Double-click the Epson_lpr icon to display available printers in the same segment as your computer on the screen. 174 EpsonNet Direct Print - Epson C823781 | Administrator's Manual - Page 187
. 8 8 8 6. Follow the on-screen instructions provided by the Add 8 Printer wizard. If you are required to install the printer driver, see "Installing the printer driver" on page 179. Adding a printer beyond a router 8 Follow the steps below to add a printer beyond a router. 8 1. Windows Me - Epson C823781 | Administrator's Manual - Page 188
3. Select the Specific Network Segment check box and enter the IP address and subnet mask of the printer you want to find. Click OK. 4. Double-click the Epson_lpr icon to view the available printers. 5. Double-click the target printer. 176 EpsonNet Direct Print - Epson C823781 | Administrator's Manual - Page 189
the on-screen instructions provided by the Add 8 Printer wizard. If you are required to install the printer driver, see "Installing the printer driver" on page 179. Adding a printer from the Printers folder 8 8 Follow the steps below to add a printer from the Printers folder. 1. Windows Me - Epson C823781 | Administrator's Manual - Page 190
the target printer listed under Epson_lpr or EpsonPeripheralNetwork and click OK or Next. 8. Click Next. Follow the on-screen instructions to install the printer driver. If you are required to install the printer driver, see "Installing the printer driver" on page 179. 178 EpsonNet Direct Print - Epson C823781 | Administrator's Manual - Page 191
Next. Note: 8 If the Add Printer wizard asks you to select either Keep existing driver or Replace existing driver, be sure to select the Replace existing driver radio button. 8 8. Click Finish and follow the on-screen instructions to complete setup. 8 8 8 8 EpsonNet Direct Print 179 - Epson C823781 | Administrator's Manual - Page 192
port. The printing speed will differ depending on the selections that you make. Windows Me/98/95 1. Click Start, point to Settings, and then select Printers. 2. Right-click the target printer and click Properties. 3. Click the Details tab and then Port Settings. The EPSON LPR Port dialog box appears - Epson C823781 | Administrator's Manual - Page 193
two printing methods. If the printer does not support this function, this check box is unavailable. 8 5. Select the Notify when printing completed check box if you want to receive an on-screen notification when printing is complete. 8 6. Click OK. 8 8 8 8 8 EpsonNet Direct Print 181 - Epson C823781 | Administrator's Manual - Page 194
182 EpsonNet Direct Print - Epson C823781 | Administrator's Manual - Page 195
Print 9 9 About EpsonNet Internet Print 9 EpsonNet Internet Print is a utility program that supports 9 printing across the Internet using Internet Printing Protocol (IPP). Since the print server supports IPP, Internet printing is possible using this utility. You can print or make printer - Epson C823781 | Administrator's Manual - Page 196
Supported products ❏ Epson print servers that support IPP (EpsonNet Internet Print comes with Epson network interface products that support IPP) Installing EpsonNet Internet Print Follow the steps below to install EpsonNet Internet Print. 1. Insert the Software CD-ROM in the CD-ROM drive. 2. If the - Epson C823781 | Administrator's Manual - Page 197
address is set for the computer and printer. 2. Make sure that the IPP settings in EpsonNet WinAssist or 9 EpsonNet WebAssist are correct. See "IPP" on page 72 or "IPP" on page 209 for instructions on settings for IPP. 9 3. To start EpsonNet Internet Print, click Start, point to Programs and - Epson C823781 | Administrator's Manual - Page 198
characters Format: http://IP address of printer:631/printer name Example: http://192.168.100.201:631/EPSON_IPP_Printer Use Proxy: When using the proxy server, select this box and enter the Proxy Server Name and Port Number. All communication is done via the proxy server. 186 EpsonNet Internet Print - Epson C823781 | Administrator's Manual - Page 199
characters; | \ 9 Port Number: 9 Enter the port number of the proxy server (from 0 to 65535). Get Printer Attributes: When you select this box and click OK, EpsonNet Internet Print communicates with the printer and acquires 9 information, so it may take a few minutes before a message - Epson C823781 | Administrator's Manual - Page 200
OK to start the Add Printer Wizard. Click Next. Note: If you click Cancel and then later want to add the printer, start the Add Printer Wizard and follow the steps below. 7. Click the Local printer radio button and click Next. 8. Select the printer driver and click Next. 188 EpsonNet Internet Print - Epson C823781 | Administrator's Manual - Page 201
9. Select the port added by EpsonNet Internet Print in the previous section. Click Next. 9 9 9 9 9 9 10. Follow the on-screen instructions to install the printer driver. 11. If a dialog box instructing you to install EPSON Status 9 Monitor 2 or EPSON Status Monitor 3 appears, click Cancel - Epson C823781 | Administrator's Manual - Page 202
. 3. Click Start, point to Settings, and then select Printers. 4. Double-click the Add Printer icon and click Next. 5. Click the My Computer radio button and click Next. 6. Click the Add Port button, and select EPSON IPP Port from the list. Then click the New Port button. 190 EpsonNet Internet Print - Epson C823781 | Administrator's Manual - Page 203
9 Format: http://IP address of printer:631/printer name Example: http://192.168.100.201:631/EPSON_IPP_Printer 9 Use Proxy: When using a proxy server, select this box and enter the Proxy 9 Server Name and Port Number. All communication is done via the proxy server. 9 EpsonNet Internet Print 191 - Epson C823781 | Administrator's Manual - Page 204
the following characters Port Number: Enter the port number of the proxy server (from 0 to 65535). Get Printer Attributes: When you select this box and click OK, EpsonNet Internet Print communicates with the printer and acquires information, so it may take a few minutes before a message appears - Epson C823781 | Administrator's Manual - Page 205
9 8. Click OK to save the settings. 9 9. Select the printer driver, and follow the on-screen instructions to install the printer driver. Note: 9 When you are using EPSON Status Monitor 3 and printing from EpsonNet Internet Print, the message "A communication error has 9 occurred." appears. To - Epson C823781 | Administrator's Manual - Page 206
194 EpsonNet Internet Print - Epson C823781 | Administrator's Manual - Page 207
to configure the printer for use on a network. By typing the IP address of the print server for the URL in your browser, you can start EpsonNet WebAssist, which allows you to configure the print server for TCP/IP, NetWare, MS Network, AppleTalk, IPP, and SNMP. 10 10 10 10 Supported Web browser 10 - Epson C823781 | Administrator's Manual - Page 208
❏ A web browser must be installed on your computer. ❏ TCP/IP must be correctly set for the computer and the print server. ❏ Do not run both EpsonNet WinAssist/MacAssist and EpsonNet WebAssist at the same time. ❏ Your browser may restrict some characters you can use. For details, see your browser or - Epson C823781 | Administrator's Manual - Page 209
: http://192.168.100.201/ Note on NetWare setting: ❏ From any NetWare client, log in to the target NetWare server or NDS context with supervisor privileges. 10 10 ❏ You cannot create a print server, print queue, or printer with EpsonNet WebAssist. You must have created these objects before using - Epson C823781 | Administrator's Manual - Page 210
acquiring the IP address. When you select Auto, DHCP becomes available and assigns an IP address automatically. If you want to set the IP address manually, select Manual. Note: ❏ The network administrator must confirm any changes made to the IP address settings. 198 - Epson C823781 | Administrator's Manual - Page 211
supported, we recommend that you select Manual and then enter an IP address. If you select Auto, the IP address of the print server changes every time you turn on the printer, and you need to change the printer when setting an IP address with EpsonNet WinAssist/MacAssist/WebAssist; this prevents any - Epson C823781 | Administrator's Manual - Page 212
. If you want to specify manually, enter the host name and the domain name in the text boxes. 10. Select Enable for Register Network Interface Address to DNS Server if you want to register the host name and domain name to the DNS server through the DHCP server that supports Dynamic DNS. If you want - Epson C823781 | Administrator's Manual - Page 213
browser and do not send a job to the printer until this message appears. Follow the on-screen instructions to reset the printer. 10 10 10 10 Note: ❏ Since the new IP address becomes available after the printer is reset, you need to restart EpsonNet WebAssist by entering the new IP address. ❏ Only - Epson C823781 | Administrator's Manual - Page 214
the print server for the URL in your browser. Index Home Favorite Help About WebAssist EPSON logo Links to the opening screen. Links to a Web site previously defined by the administrator. Links to Help. Links to the copyright and version information for EpsonNet WebAssist. Links to the Epson Web - Epson C823781 | Administrator's Manual - Page 215
Menu Information General Displays the print server information. NetWare Displays information about NetWare. the name of the administrator and a link to a favorite Web site. Reset Resets the printer and returns to the default settings. Password Set the password to protect settings. 10 10 - Epson C823781 | Administrator's Manual - Page 216
Location of the printer Model of the print server Unique hardware address of the print server. You can distinguish the print server by its MAC address. Hardware version of the print server Software version of the print server Product name of the printer attached to the print server Displays the - Epson C823781 | Administrator's Manual - Page 217
using 4.x/5.x/6.x NDS Print Server, select NDS Print Server. When using 3.x/4.x Bindery Print Server, select Bindery Print Server. When using Remote Printer mode, select Remote Printer. When not using NetWare, select Standby. Print Server Mode/NDS/Bindery Items Print Server Name Polling Interval - Epson C823781 | Administrator's Manual - Page 218
Primary Print Server Name Printer Port Number Explanations Enter the primary print server name (up to 47 characters). Enter the printer port number 's online help for detailed instructions. To set the IP address manually, select Manual. Enter an IP address for the print server. Be sure the IP - Epson C823781 | Administrator's Manual - Page 219
server address from the DHCP server. Enter the DNS server address. When the DHCP server does not respond even when Enable is selected for Acquire DNS server address automatically, the DNS server name and the domain name to the DHCP server that supports Dynamic DNS update to request for DNS dynamic - Epson C823781 | Administrator's Manual - Page 220
Play. Enter the device name. AppleTalk Items Use AppleTalk Printer Name Zone Name Entity Type Network Number Set Network Number for Manual Mode Explanations Enable or Disable AppleTalk. Enter the name of the printer attached to the print server (up to 32 characters). Enter the network zone name - Epson C823781 | Administrator's Manual - Page 221
used. 10 10 10 IPP 10 You must make the following settings before setting up the printer for Internet Printing on Windows Me/XP/Server 2003/2000 or using EpsonNet Internet Print on Windows 98/95/NT 4.0. See "About EpsonNet Internet Print" on page 183 for more information. 10 10 Items IPP URL - Epson C823781 | Administrator's Manual - Page 222
characters). Explanations Enable or Disable the trap. Enter the IP address of the server to which the trap is transmitted. Enter the community name (up to 32 trap. Enter Network Address and Node Number (MAC Address) of the server to which the trap is transmitted. Format: Network Address: Node Number - Epson C823781 | Administrator's Manual - Page 223
). Enter any comments concerning the URL above (up to 64 characters). Note: Links to ftp are not supported. 10 10 10 10 10 10 10 10 Reset 10 10 You can reset the print server or return the settings to the default values. Items Reset button Return to Default button Explanations Functions like - Epson C823781 | Administrator's Manual - Page 224
(up to 20 characters). Re-input the new password. Note: ❏ The same password can be used for EpsonNet WinAssist, MacAssist, and WebAssist. ❏ If you forget your password, you need to initialize the print server. See "Initializing the Print Server" on page 229 for instructions. 212 EpsonNet WebAssist - Epson C823781 | Administrator's Manual - Page 225
printers, interface cards, and network adapters attached to a printer. EpsonNet WebManager offers the following features: ❏ It supports printer driver management functions, such as the ability to store printer drivers on the EpsonNet WebManager server, and easy installation of printer drivers - Epson C823781 | Administrator's Manual - Page 226
Windows 2000 Professional/Server/Advanced Server (with Service Pack 4 or higher) Windows NT 4.0 Server/Workstation (with Service Pack 6 or higher) Pentium 300 MHz or better recommended 256MB 100MB (1GB is recommended when using the printer driver management function.) EpsonNet WebManager client - Epson C823781 | Administrator's Manual - Page 227
the printer driver through the Internet automatically, and easy installation of the printer driver on client PCs. Note: ❏ Some functions of EpsonNet WebManager may not be available depending on the combination of network devices. See the Introduction of the EpsonNet WebManager Reference Guide for - Epson C823781 | Administrator's Manual - Page 228
the two methods described below to use EpsonNet WebManager. EpsonNet WebManager and a Web browser running on the same PC No special server is required. Just install EpsonNet WebManager and a Web browser on the same computer that functions as a server. All administration is possible from the network - Epson C823781 | Administrator's Manual - Page 229
. Run the Web browser on a client computer to access EpsonNet WebManager on the server. Multi-platform network administration is possible from Windows, Macintosh, and UNIX platforms through the browser. 11 11 11 Windows Macintosh UNIX EpsonNet WebManager server 11 11 11 11 11 11 11 11 11 - Epson C823781 | Administrator's Manual - Page 230
-screen instructions to complete the installation. Note: ❏ You do not need to install EpsonNet WebManager in the client computer. Just announce the IP address or host name of the server to any clients who use EpsonNet WebManager from a client computer. ❏ To use the printer driver management function - Epson C823781 | Administrator's Manual - Page 231
host name in the hosts file in the Windows directory.) 11 11 From the server To start EpsonNet WebManager, click Start, point to Programs or All Programs (Windows XP/Server 2003), then EpsonNet WebManager, then select EpsonNet WebManager. 11 11 From the client Run the Web browser and type the IP - Epson C823781 | Administrator's Manual - Page 232
to read the EpsonNet WebManager's online reference guide. It provides important information and instructions on using EpsonNet WebManager. You can access the online guide by using any of the following methods: ❏ Run EpsonNet WebManager. From the Help menu, select Online Guide. ❏ Click the question - Epson C823781 | Administrator's Manual - Page 233
Chapter 12 Troubleshooting 12 12 General Problems 12 Cannot configure the print server or cannot print from the network. Cause What to do The printer settings or network settings may be wrong. First, check to see if you can print a status sheet, as described in "Status sheet button" on page - Epson C823781 | Administrator's Manual - Page 234
Cannot communicate with the print server. (The print server does not appear in the printer list of EpsonNet Win/MacAssist.) Cause What to do The Ethernet setting of the Check the setting of the HUB or the print server is not switch. appropriate for your network environment. Unable to start - Epson C823781 | Administrator's Manual - Page 235
33.44.55. Unable to start EpsonNet WebAssist. Cause What to do You have not set the IP address for the print server. Set the IP address for the print server using EpsonNet WinAssist, MacAssist, the printer's control panel, or the arp . 12 12 12 12 12 12 12 12 12 12 12 12 Troubleshooting 223 - Epson C823781 | Administrator's Manual - Page 236
print server to the network, and check the network environment. The printer is located beyond The printer and the computer must be in the router. the same segment. The Model Name and IP Address do not appear in the EpsonNet so can cause EpsonNet WinAssist to screen of EpsonNet WebAssist. How - Epson C823781 | Administrator's Manual - Page 237
cannot be used. Open the printer's properties and then click the Optional Settings tab. Select Update the Printer Option Information manually. Open the printer's properties and then click the Utility tab. Clear the Monitor the Printing Status check box. 12 12 12 12 12 12 Troubleshooting 225 - Epson C823781 | Administrator's Manual - Page 238
the Optional Settings tab. Select Update the Printer Option Information manually. Open the printer's properties and then click the Utility tab. Clear the Monitor the Printing Status check box. No clients except an administrator can print via Windows NT Server 4.0. Cause What to do CREATOR OWNER - Epson C823781 | Administrator's Manual - Page 239
the NetWare Also, make sure the print server is logged server. in to the NetWare server. 12 12 12 12 12 EpsonNet WinAssist/WebAssist will not start correctly. Cause What to do Microsoft NetWare Directory If you are using the NDS service, install Service is installed on your the Novell NetWare - Epson C823781 | Administrator's Manual - Page 240
IPX network do not appear in the EpsonNet WinAssist dialog box. Cause What to do The printer is turned off. Turn on the printer. The printer is not in the same segment as the computer where you installed EpsonNet WinAssist. To search for print servers in other segments, use Search Options of - Epson C823781 | Administrator's Manual - Page 241
, press the status sheet button to print a status sheet. Check the information on the status sheet. 12 12 12 Note: You can also initialize the print server using EpsonNet WinAssist, MacAssist, or WebAssist by clicking the Return to Default button. 12 12 12 12 12 12 Troubleshooting 229 - Epson C823781 | Administrator's Manual - Page 242
230 Troubleshooting - Epson C823781 | Administrator's Manual - Page 243
on additional methods. A If no Windows XP/Server 2003/2000/NT print server exists Use a printing method appropriate to your operating system: A A ❏ For Windows Me/98/95 We recommend TCP/IP printing via EpsonNet Direct Print. See "About EpsonNet Direct Print" on page 171. ❏ For Windows XP - Epson C823781 | Administrator's Manual - Page 244
. ❏ You can see the printer status using EPSON Status Monitor 3. ❏ For Windows XP/Server 2003/2000/NT, you can create a print log using the event viewer. ❏ You can print via a router. Disadvantages ❏ You need to set up TCP/IP. ❏ For Windows Me/98/95, EpsonNet Direct Print must be installed on all - Epson C823781 | Administrator's Manual - Page 245
❏ You can print to the printer over the Internet. Disadvantages A ❏ EPSON Status Monitor 3 cannot be used. A ❏ TCP/IP and DNS settings are required. ❏ For Windows Me/98/95, EpsonNet Internet Print must be A installed on all computers used for printing. ❏ For Windows XP/Server 2003/2000, you - Epson C823781 | Administrator's Manual - Page 246
that the Set using PING function is enabled on the TCP/IP menu in EpsonNet WinAssist or EpsonNet WebAssist. If this function is disabled, you cannot set the IP address using the arp/ping command. ❏ Make sure the print server and the computer are in the same segment. Before you start, you need the - Epson C823781 | Administrator's Manual - Page 247
segment, as follows: A 1. Set the default gateway to the host on which you are setting up the print server. A If there is a server or a router which acts as a gateway, enter the address of the server or the router. If there is no gateway, A enter the IP address of your computer as a gateway address - Epson C823781 | Administrator's Manual - Page 248
has been assigned to the print server. Note: When the IP address is set by the ping command, the subnet mask is automatically changed by the class of the IP address. To change the subnet mask and the default gateway according to your network environment, use EpsonNet WinAssist on Windows operating - Epson C823781 | Administrator's Manual - Page 249
not supported, you need to change the A printer port setting every time you turn on the printer. Therefore, we recommend that you set a valid IP address for the print server by using the one of the following methods. ❏ Set the IP address for the print server manually. Use A EpsonNet WinAssist - Epson C823781 | Administrator's Manual - Page 250
you can access EpsonNet WebAssist for basic information about the printer, such as manufacturer, model name, location, and administrator's name. Right-click the printer's icon in the My Network Places folder and select Properties. You can check the brief information of the print server. To use this - Epson C823781 | Administrator's Manual - Page 251
the A Add/Remove button (Windows Me/98/95/NT 4.0) or the Change/Remove button (Windows 2000). A 4. Follow the on-screen instructions to complete uninstallation. Windows XP/Server 2003 A 1. Click Start, click Control Panel, and then click Add or Remove Programs. A 2. Click the Change or Remove - Epson C823781 | Administrator's Manual - Page 252
the pull down menu. 5. Click the Uninstall button. 6. Follow the on-screen instructions to complete uninstallation. Note: You can also uninstall EpsonNet MacAssist by dragging the MacAssistxxx folder (Mac OS 8.x to 9.x) or the EpsonNet MacAssist OSX x.xx folder (Mac OS X) to the Trash. 240 Tips for - Epson C823781 | Administrator's Manual - Page 253
Appendix B Specifications B B Print Server Specification B Parallel Interface: IEEE 1284 B Network Interface: RJ-45 connector Button: Connector: Status sheet button DC-IN connector B Status Lights: Status light Data light B B Regulatory - Epson C823781 | Administrator's Manual - Page 254
Reliability MTBF: MTTR: 10,000 hours (power on, 100% duty) N/A (Replacement) Environmental Operating Temperature: Storage Temperature: Operating Humidity: Storage Humidity: Operating Vibration: Storage Vibration: Shock: 5 to 35° C (41 to 95° F) -30 to 70° C (-22 to 158° F) 20 to 80% RH 5 to 95% - Epson C823781 | Administrator's Manual - Page 255
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television B reception. However, there is no guarantee that interference will not occur in - Epson C823781 | Administrator's Manual - Page 256
Regulatory Approvals for AC Adapter A192H Safety standards: EMC: UL1950 CSA C22.2 No.950 EN60950 AS/NZS3260 CE Marking: EN 55022 Class B EN 55024 EN 61000-3-2 EN 61000-3-3 AS/NZS 3548 Class B For European Users This device complies with EU directives, 89/336/EEC. AC Adapter model A192H conforms - Epson C823781 | Administrator's Manual - Page 257
, 176 EPSON AppleTalk, 70, 87, 208 EpsonNet Direct Print, 171 Internet Print, 183 MacAssist, 42, 77 MacAssist EasySetup, 90 WebAssist, 195 WebManager, 213 WinAssist, 36, 49 F ftp, 169 I Initializing the print server, 229 Installation EpsonNet Direct Print, 172 EpsonNet Internet Print, 184 EpsonNet - Epson C823781 | Administrator's Manual - Page 258
O Operating environment, 5 P Password for EpsonNet MacAssist, 89 EpsonNet WebAssist, 212 EpsonNet WinAssist, 75 PCONSOLE, 137, 150 ping, 235 Print Server mode, 62, 132, 135, 136, 157, 205 Protocols, 5 Public Access Printers, 153, 157 R Remote Printer mode, 67, 132, 137, 141, 144, 157, 206 Reset, 203
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
 |
 |
C82378
✽
EpsonNet 10/100 Base Tx External Print Server
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of Seiko Epson Corporation.
The information contained herein is designed only for use with this Epson product. Epson
is not responsible for any use of this information as applied to other products.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this
product or third parties for damages, losses, costs, or expenses incurred by purchaser or third
parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications,
repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with
Seiko Epson Corporation’s operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from
the use of any options or any consumable products other than those designated as Original
Epson Products or Epson Approved Products by Seiko Epson Corporation.
EPSON, EPSON Stylus, and EPSON ESC/P are registered trademarks of Seiko Epson
Corporation.
NetWare and Novell are registered trademarks of Novell, Inc.
Apple, Macintosh, AppleShare, LaserWriter, AppleTalk, LocalTalk, EtherTalk,
OpenTransport and Kanji-Talk are registered trademarks of Apple Computer, Inc.
PostScript is a registered trademark of Adobe Systems, Inc.
Unix is a registered trademark in the United States and other countries, licensed exclusively
through X/Open Company Limited.
IBM, OS/2, OS/2 Warp, WebExplorer, NetFinity, AIX are trademarks of IBM Corp.
LANDesk, NetPort are trademarks of Intel Corp.
Microsoft, Windows, Windows NT, Internet Explorer, ActiveX are registered trademarks of
Microsoft Corp.
SPARC, SunOS, Sunsoft, Solaris, Java are trademarks of Sun Microsystems, Inc.
SCO UNIX, SCO UnixWare are registered trademarks of The Santa Cruz Operation, Inc.
HP, HP/UX, PCL, HPGL are registered trademarks of Hewlett-Packard Company.
General Notice:
Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
© 2003 by Epson America, Inc.
®
Administrator’s Manual
NPD0420-00