Epson C32C824161 User Manual

Epson C32C824161 - UB R02 Print Server Manual

Get Epson C32C824161 - UB R02 Print Server PDF manuals and user guides View all Epson C32C824161 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson C32C824161 manual content summary:

  • Epson C32C824161 | User Manual - Page 1
    an IEEE 802.11b Radio Frequency (RF) module for EPSON® TM printers. This manual provides instructions, including a simple setup for operators of POS systems rate: up to 11 Mbps, depending on operating environment ❏ OPOS, APD support Part Names The following view shows the part names of the UB-R02.
  • Epson C32C824161 | User Manual - Page 2
    reset signal for pin 31 to "enable," if you are using a TM printer that has this setting. Refer to the manual for each TM printer for details. How to Set Up the UB-R02 Preparation Printing a Status Sheet Power on the printer. Wait for a few seconds. Then, hold down the push button on the
  • Epson C32C824161 | User Manual - Page 3
    Guide are necessary for setup. Obtain them from the appropriate web site below: For customers from North America, go to the following web site: http://pos.epson is tested using the EPSON power supplies and TM series printers.) Europe: CE marking North with the instruction manual, may cause
  • Epson C32C824161 | User Manual - Page 4
    , if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable against any damages or problems arising from
  • 1
  • 2
  • 3
  • 4
1
UB-R02 User’s Manual
Copyright © SEIKO EPSON CORPORATION 2004
Printed in Japan 2004.01
Introduction
The UB-R02 is an interface board on which is installed an IEEE 802.11b Radio
Frequency (RF) module for
EPSON
®
TM printers.
This manual provides instructions, including a simple setup for operators of
POS systems in which the UB-R02 is installed so that the operators can use the
UB-R02 safely and correctly.
Key to Symbol
The symbol in this manual is identified by its level of importance, as defined
below. Read the following carefully before handling the product.
Note:
Notes have important information and useful tips on the operation of your equipment.
Features and Functions
❏
64/128-bit WEP
❏
Protocols: TCP, UDP, ICMP, IP, LP/LPR (for APD), TCP socket port (for
OPOS)
❏
Transfer rate: up to 11 Mbps, depending on operating environment
❏
OPOS, APD support
Part Names
The following view shows the part names of the UB-R02.
Note: This photograph shows the TM-T88III printer with the UB-R02 installed.
Drawer kick-out
connector
Push button
Power supply
connector
404861602