Epson C31C636A898 Technical Reference
Epson C31C636A898 Manual
 |
View all Epson C31C636A898 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson C31C636A898 manual content summary:
- Epson C31C636A898 | Technical Reference - Page 1
TM-T88IV Technical reference guide EPSON English 410528700 - Epson C31C636A898 | Technical Reference - Page 2
- Epson C31C636A898 | Technical Reference - Page 3
with Seiko Epson Corporation's operating and maintenance instructions. ❏ Seiko Epson Corporation shall not be liable against any damages or problems arising from POS systems. The system is compatible with all types of EPSON POS printers and displays. Moreover, its flexibility make it easy to upgrade - Epson C31C636A898 | Technical Reference - Page 4
For Safety Key to Symbols The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. WARNING: You must follow warnings carefully to - Epson C31C636A898 | Technical Reference - Page 5
TM-T88IV Technical Reference Guide WARNING: ❏ Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire or electric shock. Immediately unplug the equipment. ❏ Only disassemble this product as described in this manual. Do not make - Epson C31C636A898 | Technical Reference - Page 6
or any part of the hand in the roll paper opening where the manual cutter is installed. ❏ Do not open the roll paper cover without taking The following standards are applied only to the printers that are so labeled. (EMC is tested using the Epson power supplies.) Europe: CE marking Safety: EN - Epson C31C636A898 | Technical Reference - Page 7
expressly approved by Seiko Epson Corporation could void your authority to operate the equipment. CE Marking The printer conforms to the following Directives if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of - Epson C31C636A898 | Technical Reference - Page 8
Reference Guide EPSON OPOS ADK Description Provides information to enable POS operators to use the TMT88IV safely and correctly. This manual is packed in the box with the printer.* Provides detailed ESC/POS command information. Contact us to obtain this guide. This guide.* This is an OCX driver - Epson C31C636A898 | Technical Reference - Page 9
Technical Reference Guide Name of document EPSON OPOS ADK Manual EPSON Advanced Printer Driver EPSON Advanced Printer Driver Manual Description Provides information for anyone who is programming using OPOS. This is included in the EPSON OPOS ADK.* This is a Windows driver.* Provides information - Epson C31C636A898 | Technical Reference - Page 10
viii Rev. A - Epson C31C636A898 | Technical Reference - Page 11
Contents TM-T88IV Technical Reference Guide Chapter 1 Product Overview Features 1-1 Product Structure 1-2 Model 1-2 Panel 1-4 Power Switch 1-5 Connectors 1-5 Handling the Printer 1-5 Installing and Replacing Roll Paper 1-6 Removing Jammed Paper Installing the Driver 2-16 Contents vii - Epson C31C636A898 | Technical Reference - Page 12
Chapter 3 Application Development Information Introducing the Control Methods 3-1 Windows Driver (EPSON Advanced Printer Driver 3-1 EPSON OPOS ADK 3-3 ESC/POS Commands 3-6 Various Utilities 3-6 Switches and Buttons 3-6 FEED Button 3-7 Panel LEDs and Error Status 3-7 (POWER) LED 3-7 PAPER - Epson C31C636A898 | Technical Reference - Page 13
TM-T88IV Technical Reference Guide Appendix B Options and Consumables Roll Paper B-1 Power Supply B-1 PS-180 B-1 Appendix C Character Code Tables Page 0 (PC437: USA, Standard Europe C-1 Page 1 (Katakana C-2 Page 2 (PC850: Multilingual C-3 Page 3 ( - Epson C31C636A898 | Technical Reference - Page 14
x Contents Rev. A - Epson C31C636A898 | Technical Reference - Page 15
Guide The TM-T88IV thermal printer product is currently available from EPSON. In addition, the PS170, the power supply, is obsolete and no longer available. It is described only for legacy support OPOS ADK and Windows® printer drivers are available. • In addition to supporting several kinds of bar - Epson C31C636A898 | Technical Reference - Page 16
(body) ❏ Roll paper × 1 ❏ User's manual × 1 ❏ Power switch cover × 1 ❏ Connector cover * ❏ External power supply unit model: PS-180 * * May not be included with your printer. 1.2.3 Options ❏ External power supply unit • Model PS-180 (PS-180 supports the power-saving feature.) ❏ Affixing tapes - Epson C31C636A898 | Technical Reference - Page 17
TM-T88IV Technical Reference Guide 1.2.5 TM-T88IV Basic Specification Table Table 1-1 1. High-speed print for canceling receive buffer BUSY state * 5. Supported character sets (extended graphics) 6. Driver (EPSON OPOS ADK, Advanced Printer Driver) Settable baud rate with commands: 2400, 4800 - Epson C31C636A898 | Technical Reference - Page 18
is little remaining. ❏ Goes out when there is a sufficient amount of roll paper remaining. ❏ Flashes when a self-test is in progress or when the printer waits for a macro execution. 1.3.2.2 Buttons FEED button Pressing this button once feeds the roll paper by one line. Holding this button down feeds - Epson C31C636A898 | Technical Reference - Page 19
Unit and Cash Drawer" (page 2-15) and "Connecting the Printer to the Host Computer" (page 2-8). 1.4 Handling the Printer WARNING: Do not open the printer cover during printing. Doing so may damage the printer. Do not touch the manual cutter with your hands when installing or replacing roll paper - Epson C31C636A898 | Technical Reference - Page 20
roll paper core. 1.4.1.1 Installing Roll Paper 1. Make sure the host has not sent a printing command to the printer, and press the cover open button to open the printer cover. If the printer cover does not open, a probable cause is that the autocutter is locked. If this happens, refer to "Removing - Epson C31C636A898 | Technical Reference - Page 21
TM-T88IV Technical Reference Guide 3. Pull out the roll paper toward you, then close the printer cover. Figure 1-6 Closing the printer cover 4. Tear off the leading edge of the roll paper using the manual cutter. Figure 1-7 Tear off paper 1.4.1.2 Replacing Paper Follow the procedure below to - Epson C31C636A898 | Technical Reference - Page 22
, open the printer cover, and clean the thermal elements of the thermal head with a cotton swab moistened with an alcohol solvent (ethanol, methanol, or IPA). Epson recommends cleaning the thermal head periodically (generally every 3 months) to maintain receipt print quality. 1-8 Product Overview - Epson C31C636A898 | Technical Reference - Page 23
Connector Cover Use the following method to attach the connector cover. 1.4.5.1 Attaching and Removing the Connector Cover These instructions apply if a connector cover is packed with your printer to protect your cables. To attach it, follow the steps below: 1. First, connect all the cables. The - Epson C31C636A898 | Technical Reference - Page 24
as shown in the illustration. pushing both sides of the connector cover inward to detach the hooks from the printer case 1.4.6 Shipping Procedures Do the following before shipping the printer. 1. Press the power switch to turn the power off. 2. Make sure the LED is out. 3. Remove the power supply - Epson C31C636A898 | Technical Reference - Page 25
Chapter 2 Setup TM-T88IV Technical Reference Guide Before using the printer, you need to make various settings to increase the printer's functionality. Configure the printer appropriately depending on the environment. 1. Install the printer (page 2-2) Detailed setup 2. Set the DIP switches (page - Epson C31C636A898 | Technical Reference - Page 26
supply or other cables or other objects. 2.1.2 Precautions for Wall Installation ❏ Make the following settings on the printer when you hang it on a wall. For details, refer to the installation manual provided with the optional WH-10 Wall Hanging Bracket Set. • Install the roll paper stopper • Adjust - Epson C31C636A898 | Technical Reference - Page 27
TM-T88IV Technical Reference Guide CAUTION: Before you remove the DIP switch cover, turn the printer off. Otherwise, a short-circuit may cause the printer to malfunction. 1. Make sure the power supply for the printer is turned off. 2. Unscrew the screw to remove the DIP switch cover from the base of - Epson C31C636A898 | Technical Reference - Page 28
with DIP switch 1 has priority. Table 2-4 Switch bank 2 settings SW Function ON OFF 2-1 Handshake (BUSY) conditions Receive buffer full Printer offline or receive buffer full * 2-2 Reserved (do not change setting) Fixed to OFF 2-3, 2-4 Print density selection/low-power mode (See - Epson C31C636A898 | Technical Reference - Page 29
TM-T88IV Technical Reference Guide 2.2.2.2 DIP switch settings for other interface specifications The following DIP switch functions are for parallel interface/USB/Ethernet model printers. Note: * Factory setting Table 2-6 Parallel/USB/Ethernet DIP switch bank 1 SW Function 1-1 Automatic line - Epson C31C636A898 | Technical Reference - Page 30
2.3 Customized value The customized value is set with command and Memory switch setting utility. Table 2-9 Types of the Customized Value Function Selection of print density Selection of print speed Number of head energizing Selection of print control Selection of black-color density in two-color - Epson C31C636A898 | Technical Reference - Page 31
TM-T88IV Technical Reference Guide 2. Loosen the adjustment screw fastening the detector, and align the upper edge of the positioning plate with the adjustment position. Adjustment positions are as follows: - Epson C31C636A898 | Technical Reference - Page 32
for available serial cross cables are as follows: Figure 2-11 Cross cable diagrams The cable needed depends on printer control and handshake method. You can operate the TM printer with a Windows driver, OPOS, or ESC/POS commands. XON/XOFF, DTR/DSR, or RTS/CTS are available as handshake controls - Epson C31C636A898 | Technical Reference - Page 33
TM-T88IV Technical Reference Guide Stand alone Both the TM printer and DM-D are connected to the DSR (DOS, OPOS, Visual C) - - Type A or B Type A or B RTS/CTS (DOS, Windows driver, Visual C, Visual Basic MSComm) - - Type B Type B Figure 2-12 Configuration of stand-alone connection Pass-through - Epson C31C636A898 | Technical Reference - Page 34
the connectors firmly. 3. When using interface cables equipped with a ground line, attach the ground line to the screw hole marked "FG" on the printer. 4. Connect the other end of the interface cable to the host computer. FG FG DK DC24V Interface connector Drawer kick-out connector Figure 2-14 - Epson C31C636A898 | Technical Reference - Page 35
Parallel interface connection diagram TM-T88IV Technical Reference Guide Figure 2-15 Parallel interface connection 2.5.2.2 Connecting the the ground line to the screw hole marked "FG" on the printer. 4. Connect the other end of the interface cable to the host computer. 2.5.3 USB Interface - Epson C31C636A898 | Technical Reference - Page 36
in a USB model connector panel is a bus-power-supply hub. It is important to note that bus-power-supply hubs (including other USB model TM printers) and bus-power-supply functions with a current consumption of 100 mA or more cannot be connected directly to the - Epson C31C636A898 | Technical Reference - Page 37
TM-T88IV Technical Reference Guide To use USB model TM printers, the TM printer driver (EPSON OPOS ADK or advanced printer driver) must be installed on the host computer. Get the latest driver information from one of the following URLs: For customers from North America, go to the following web site: - Epson C31C636A898 | Technical Reference - Page 38
green) LED (yellow) Switch Drawer kick-out connector Printer power supply connector Figure 2-19 Example Ethernet port "UB-E02 Technical Reference Guide" from one of the following URLs: For customers from North America, go to the following web site: http://pos.epson.com/ For customers from - Epson C31C636A898 | Technical Reference - Page 39
UB-R02 Technical Reference Guide. 2.6 Connecting Power Supply Unit and Cash Drawer Always use one of the following power supplies: The EPSON PS-180 (the a fault ever occur in the EPSON PS-180, or equivalent product, immediately turn off the power to the printer and remove the power supply cable - Epson C31C636A898 | Technical Reference - Page 40
, either the Advanced Printer Driver (APD) (Windows driver) or the EPSON OPOS ADK (OCX driver) must be installed. For an outline of each driver, refer to "Introducing the Control Methods" (page 3-1). For details on installation methods, refer to the manual for the respective driver. Note: ESC/POS - Epson C31C636A898 | Technical Reference - Page 41
Windows Driver (EPSON Advanced Printer Driver) The EPSON Advanced Printer Driver provides the TM printer with satisfactory control as a Windows driver. 3.1.1.1 EPSON Advanced Printer Driver overview EPSON Advanced Printer Driver has the following features: ❏ Supplies a Windows printer driver for - Epson C31C636A898 | Technical Reference - Page 42
C++ to use status API. ❏ Manuals The following manuals can be installed: • User's manual (for developers) • Engineering data for each status • Main function control methods (for WordPad and VB) 3.1.1.3 EPSON Advanced Printer Driver support environment ❏ Supported interfaces • Serial, parallel, USB - Epson C31C636A898 | Technical Reference - Page 43
Guide ❏ Supported devices Refer to the release note for the driver for details on available equipment. • EPSON receipt printer • EPSON customer display • EPSON cash drawer Note: A separate USB device driver is required for a USB model printer to sample programs and manuals, and the function for - Epson C31C636A898 | Technical Reference - Page 44
functions are supported by EPSON-original Direct function automatically restores the printer to the state that EPSON devices Header files for CO, SO, C++, header files for VB, TLB file of CO, device information files, etc., can be installed. ❏ Manuals • User's guide (environment construction manual - Epson C31C636A898 | Technical Reference - Page 45
Saves a bitmap file to the printer or customer display, for example. • USB device driver This driver is necessary to connect a USB model printer. • Sample programs Sample programs for VB, VC++ can be installed. 3.1.2.3 EPSON OPOS ADK support environment ❏ Supported interfaces • Serial, parallel, USB - Epson C31C636A898 | Technical Reference - Page 46
3.1.3 ESC/POS Commands To directly control the TM printer using ESC/POS commands, EPSON proposes printing/ control via ESC/POS commands. The printer can be controlled directly by sending ESC/POS commands from an application to the printer. For detailed information about ESC/POS commands, please - Epson C31C636A898 | Technical Reference - Page 47
TM-T88IV Technical Reference Guide 3.2.1 FEED Button The printer feeds paper based on the line spacing set by the control method (OPOS, Advanced Printer Driver, ESC/POS commands). However, you cannot feed paper using the FEED button under the following conditions: • When the roll paper cover is open - Epson C31C636A898 | Technical Reference - Page 48
normal or the cover is correctly closed. ❏ A recoverable error recovers by resetting the printer or sending a command from the driver after the cause of the error is eliminated. ❏ For unrecoverable errors, the printer or the power supply may be malfunctioning and must be repaired. Automatically - Epson C31C636A898 | Technical Reference - Page 49
Reference Guide Recoverable errors Although normal printer operation is not possible after a recoverable error occurs, this is not a printer malfunction. These errors can be recovered easily by turning the power on again or sending an error recovery command from the driver after eliminating - Epson C31C636A898 | Technical Reference - Page 50
In this case, double printing and printing position shift may occur. When a cover open error occurs, we recommend clearing the printer's print buffer by sending the error recovery command from the driver, and resending the print data. Note: Whether the cover is open or not does not affect the status - Epson C31C636A898 | Technical Reference - Page 51
Guide 3.4.3 Offline This printer is not equipped with an online/offline switch. The printer automatically goes offline under the following conditions: • During power on (including resetting with the interface) until the printer the Advanced Printer Driver, DIP SW2-1 must be ON. When using OPOS, it - Epson C31C636A898 | Technical Reference - Page 52
Code To set and print each bar code, refer to the OPOS, Advanced Printer Driver, and ESC/POS command documentation, respectively. Note: Take a consideration as described below to determine whether the ability of the reader (scanner) can be satisfied when the print result on the receipt, such as bar - Epson C31C636A898 | Technical Reference - Page 53
TM-T88IV Technical Reference Guide 3.7 Notes on Printing 2-Dimensional Code The TM-T88IV supports 2-dimensional code printing. Be OPOS, the printer driver, and the ESC/POS commands. 3.9 Operating Mode (Switch Panel Operation) The printer has a self-test mode to check printer settings in addition - Epson C31C636A898 | Technical Reference - Page 54
1. Look for information relating to your inquiry or problem in the questions. 2. Then, follow the instructions described in the "A" sentence below it. 3.10.1 • Data length You can check printer settings as follows: 1. Run a self-test to check the printer's serial communication conditions. (See page - Epson C31C636A898 | Technical Reference - Page 55
TM-T88IV Technical Reference Guide NOTES (*1) (*2) (*3) Operating the printer with incorrectly installed devices voids the warranty. Connecting devices other than the drawer open/close switch voids the warranty. Using a drawer or a drawer kick-out - Epson C31C636A898 | Technical Reference - Page 56
3-16 Application Development Information Rev. A - Epson C31C636A898 | Technical Reference - Page 57
TM-T88IV Technical Reference Guide Chapter 4 ESC/POS Command-related Information This chapter introduces the printer operation settings, which can be made by using ESC/POS commands, and precautions for those operation settings. 4.1 NV Memory (Non-volatile Memory) The printer's NV memory can be - Epson C31C636A898 | Technical Reference - Page 58
method has the following features. For details, see the "ESC/POS Application Programming Guide." • Automatic status back (ASB): When a status request is processed as a regular command, the printer automatically returns a status message whenever the status changes. Always monitor the value returned - Epson C31C636A898 | Technical Reference - Page 59
Chapter 5 Product Specifications TM-T88IV Technical Reference Guide 5.1 Product Specifications (TM-T88IV) Table 5-17 Specifications Print method Thermal line printing Print width Standard: paper width of 80 mm - print width of 72 mm {2. - Epson C31C636A898 | Technical Reference - Page 60
{1/6"}) Bit image, Ladder bar code, 2D code and Page mode: 60mm/s {2.4"/s} The above speed values are approximate. The values are when the printer prints with density "Normal" at 24 V and 25°C {77°F} Speed is adjusted automatically depending on the voltage applied and head temperature. Carriage - Epson C31C636A898 | Technical Reference - Page 61
TM-T88IV Technical Reference Guide Table 5-20 Print speed Print control mode Unit density Normal). Note, however, the print speed automatically changes with the voltage applied to the printer and with the head temperature conditions. Note: The print speed sometimes slows down, depending on the - Epson C31C636A898 | Technical Reference - Page 62
5.5 Printable Area (TM-T88IV) For 80mm paper width model: The printable area of a paper with width of 79.5 ± 0.5 mm {3.13 ± 0.02"} is 72.2 ± 0.2 mm {2.84 ± 0.008"} (512 dots) and the space on the right and left sides are approximately 3.7 ± 2 mm {0.15 ± 0.079"}. Print direction Printable area Roll - Epson C31C636A898 | Technical Reference - Page 63
TM-T88IV Technical Reference Guide 5.6 Print Position versus Cutter Position (TM-88IV) The following illustration shows the relationship between print position and cutter position. Manual cutter position Autocutter blade position Cut position Print direction Final line of previous receipt Approx. - Epson C31C636A898 | Technical Reference - Page 64
5.7 Overview of External Dimensions (TM-T88IV) 5.7.1 External Dimensions The dimensions in the figure below are common to both the TM-88III and TM-88III. ❏ Height 148 mm {5.83"} ❏ Width 145 mm {5.71"} ❏ Depth 195 mm {7.68"} ❏ Weight Approx. 1.8 kg {3.97 lb} (without roll paper) [Units: mm - Epson C31C636A898 | Technical Reference - Page 65
TM-T88IV Technical Reference Guide 5.8 Operating Specifications (TM-T88IV) Table 5-24 Temperature and Approximately 55 dB (Bystander position) NOTE: The values above are measured in the Epson evaluation condition. The acoustic noise differs depending on the paper used, printing contents, - Epson C31C636A898 | Technical Reference - Page 66
5-8 Product Specifications Rev. A - Epson C31C636A898 | Technical Reference - Page 67
Interfaces and Connectors TM-T88IV Technical Reference Guide A.1 RS-232 Serial Interface A.1.1 Interface SW1-8: 4800bps, 9600bps, 19200bps, 38400bps Parity check Parity selection Stop bit Connector Printer side Select one of the following with Commands: 2400bps, 4800bps, 9600bps, 19200bps - Epson C31C636A898 | Technical Reference - Page 68
ready to receive data. • During the self-test. 25 INIT Input Changing DIP SW2-8 enables this signal to be used as a reset signal for the printer. The printer is reset if the signal remains at SPACE for a pulse width of 1 ms or more. A.1.3 XON/XOFF When XON/XOFF control is selected, the - Epson C31C636A898 | Technical Reference - Page 69
Interface A.2.1 Modes The IEEE 1284 parallel interface supports the following two modes. Table A-4 Parallel modes Mode Communication direction Compatibility mode Host →Printer communication Reverse mode Printer →Host communication Other information Centronics-compliant Assumes a data - Epson C31C636A898 | Technical Reference - Page 70
the host proceeds in the nibble or byte mode. This mode allows data transfer from an asynchronous printer under the control of the host. Data transfers in the nibble mode are made via the existing control lines in units of four bits (a nibble). - Epson C31C636A898 | Technical Reference - Page 71
TM-T88IV Technical Reference Guide A.2.2 Interface Signals Table A-5 Connector pin assignments Pin Source 1 Host 2 Host/Ptr 3 Host/Ptr 4 Host/Ptr 5 Host/Ptr 6 Host/Ptr 7 Host/Ptr 8 Host/Ptr 9 Host/Ptr 10 Printer 11 Printer 12 Printer 13 Printer 14 Host 15 - Epson C31C636A898 | Technical Reference - Page 72
Note: A signal name with a rule above it indicates an "L" active signal. Bidirectional communications cannot take place, unless all signal names for both sides correspond to each other. Connect all signal lines using a twisted-pair cable. Connect the return side to the signal ground level. Make sure - Epson C31C636A898 | Technical Reference - Page 73
Appendix B Options and Consumables TM-T88IV Technical Reference Guide B.1 Roll Paper The table below shows the roll paper specifications. Table B-1 Paper specifications Type of paper Specified thermal paper Shape Roll Paper width Select from - Epson C31C636A898 | Technical Reference - Page 74
B.2.1.2 Case specifications ❏ Dimensions: ❏ Weight: ❏ Material: ❏ Color: 68 mm (D) × 136 mm (L) × 32 mm (H) (excluding projections) {2.68" × 5.35" × 1.26"} Refer to the figure below. Approx. 0.4 kg {14.11 oz} (excluding the AC cable) Durability level: V0 Black (matte) 136 68 32 Figure B-1 Case - Epson C31C636A898 | Technical Reference - Page 75
Appendix C Character Code Tables TM-T88IV Technical Reference Guide C.1 Page 0 (PC437: USA, Standard Europe) (International character set: when "America" is selected) DC 4 Note: The character code tables show only character configurations. They do not - Epson C31C636A898 | Technical Reference - Page 76
C.2 Page 1 (Katakana) C-2 Character Code Tables Rev. A - Epson C31C636A898 | Technical Reference - Page 77
C.3 Page 2 (PC850: Multilingual) TM-T88IV Technical Reference Guide Rev. A Character Code Tables C-3 - Epson C31C636A898 | Technical Reference - Page 78
C.4 Page 3 (PC860: Portuguese) C-4 Character Code Tables Rev. A - Epson C31C636A898 | Technical Reference - Page 79
C.5 Page 4 (PC863: Canadian-French) TM-T88IV Technical Reference Guide Rev. A Character Code Tables C-5 - Epson C31C636A898 | Technical Reference - Page 80
C.6 Page 5 (PC865: Nordic) C-6 Character Code Tables Rev. A - Epson C31C636A898 | Technical Reference - Page 81
C.7 Page 16 (WPC1252) TM-T88IV Technical Reference Guide Rev. A Character Code Tables C-7 - Epson C31C636A898 | Technical Reference - Page 82
C.8 Page 17 (PC866: Cyrillic #2) C-8 Character Code Tables Rev. A - Epson C31C636A898 | Technical Reference - Page 83
C.9 Page 18 (PC852: Latin2) TM-T88IV Technical Reference Guide Rev. A Character Code Tables C-9 - Epson C31C636A898 | Technical Reference - Page 84
C.10 Page 19 (PC858: Euro) C-10 Character Code Tables Rev. A - Epson C31C636A898 | Technical Reference - Page 85
C.11 Page 255 (Blank Page) TM-T88IV Technical Reference Guide UD: undefined Rev. A Character Code Tables C-11 - Epson C31C636A898 | Technical Reference - Page 86
C.12 International Character Set C-12 Character Code Tables Rev. A - Epson C31C636A898 | Technical Reference - Page 87
Guide Appendix D TM-T88IV/TM-88III Comparison Table 1. Print speed 2. High speed graphic printing 3. Two-color printing 4. Multilingual support When hexadecimal dumpint ends by pressing the FEED button three times, the printer cuts paper completely. Mean: Approximately 1.8 A < - Epson C31C636A898 | Technical Reference - Page 88
consumption mode 14. UB series interface support 15. Limitation of the function when UB series interface support TM-T88IV TM-T88III The customized value Depending on the condition of the command or the print duty, the printer controls the print speed or the number of the head energizing, in - Epson C31C636A898 | Technical Reference - Page 89
- Epson C31C636A898 | Technical Reference - Page 90
EPSON SEIKO EPSON CORPORATION Printed in Japan
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
 |
 |
TM-T88IV
Technical reference
guide
English
410528700
EPSON