Epson ActionNote 660C Product Support Bulletin(s)

SUBJECT:

ActionNote 600 Series NoteBook Computer and the Suspend to Disk File

with a Compressed Hard Drive

Date: 5/30/95

PSB No: PSB S-0184

Page(s): 1 of 2

Originator: DS

This bulletin provides information on creating a Suspend to Disk File so it will co-exist

with a compressed hard drive volume.

The Suspend to Disk File cannot be created on a compressed volume/partition, because

the utility that creates the Suspend to Disk File creates it in a compressed format.

Under a normal DRVSPACE routine, the original “C” drive is compressed with all the

program and data files included and an “H” drive is created that contains command.com

for the boot process. The Boot partition, “H”, is about 2 MB’s, and the space for the

Suspend to Disk File needs to be about 2MB larger then the amount of system memory.

Even if enough space is allocated, the sector signatures are not written, though the

file is created, thus at boot, the file will not initialize.

So, the following must be done:

1 On an uncompressed drive, run DRVSPACE.

2 From the MENU, select CUSTOM.

3. Now choose “Create an Empty Compressed Drive”.

This will leave drive “C” intact as drive “C”, and create “H” as the compressed

volume. All the currently installed programs and data files will also be intact on

the uncompressed drive “C”.

4 A status box will appear showing remaining space on drive “C”. Move the

highlighter to the line for drive “C” and change the amount to 2mb + the amount

of your system memory. This space will be in addition to the space already

occupied by your programs and data files.

5. Create the compressed drive, which takes about 1 minute, then exit DRVSPACE

and reboot the computer to DOS.

6. At the DOS “C” prompt, change to the “PM” directory and run 0VMAKFIL

and answer YES to create Suspend to Disk File and press ENTER.