Epson 5040UBe Quick Setup
Epson 5040UBe Manual
 |
View all Epson 5040UBe manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson 5040UBe manual content summary:
- Epson 5040UBe | Quick Setup - Page 1
PowerLite® Home Cinema 5040UB/5040UBe Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. port. Note: You can connect tablets, smartphones, and other devices that support the MHL™ standard to the HDMI port on the side of the WirelessHD - Epson 5040UBe | Quick Setup - Page 2
arrow buttons on the remote control to highlight any of the options on the Home screen that appears, then press Enter to select it. You can display a For more information on using the remote control, see the online User's Guide. Adjust the image 1 Press the Pattern button on the remote control - Epson 5040UBe | Quick Setup - Page 3
You also need a pair of Epson® (part number V12H548006) or Epson-compatible RF 3D active shutter glasses. 's Guide for more information on adjusting 3D images. Viewing WirelessHD content (PowerLite Home Cinema 5040UBe only WirelessHD connection fails, see the "Troubleshooting" section. 6 If you have - Epson 5040UBe | Quick Setup - Page 4
or long distance charges may apply. Internet support Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. Registration Register today to get product
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Choose a location
Keep the projector level and place it at a height so its lens is even with the top
or bottom of the screen and is centered horizontally. If this isn’t possible, use
the lens shift feature or the keystone correction button on the projector to
reposition the image (see “Adjust the image”).
In order to view 3D images correctly, RF 3D glasses must be worn within 32 feet
(10 m) of the projector. Use the image below to determine the viewing distance
for 3D projection (the shading represents the 3D viewing area):
See the online
User’s Guide
for more information on where to place your
projector.
Connect the projector
Choose from the following connections. For additional connection types, see
the online
User’s Guide
.
Video device
1
If necessary, remove the cover as shown below.
2
Connect multiple video devices and use the Source buttons on the remote
control or the
button on the projector to switch between them.
HDMI cable
Optical HDMI
Note:
When connecting a source that requires HDCP 2.2, you must use
the HDMI1 port.
WirelessHD™ Transmitter (PowerLite Home Cinema
5040UBe only)
Follow these steps to set up the included WirelessHD Transmitter.
HDMI
1
Place the transmitter within 32 feet (10 m) of the projector. Make sure the
front of the transmitter faces the front of the projector. See the online
User’s Guide
for more information on the WirelessHD transmission range.
32 ft
(10 m)
16 ft
(5 m)
32 ft (10 m)
16 ft (5 m)
Note:
Do not place the transmitter on a metal surface, as this may
interfere with the signal. Make sure there are no obstructions between
the transmitter and the projector.
2
Plug the AC adapter into the transmitter and a wall outlet.
3
Connect the HDMI cables to your video input devices and the HDMI ports
on the side and back of the transmitter. You can connect up to four input
devices to the transmitter. See “Viewing WirelessHD content” on the back
of this sheet for information on switching between input sources.
Note:
You can connect tablets, smartphones, and other devices that
support the MHL™ standard to the HDMI port on the side of the
WirelessHD Transmitter. Some devices may require an adapter or may not
require an MHL cable. Not all features or functions may be supported.
Check your device’s documentation for more information.
4
To use the transmitter as a pass-through device to a television or other
display, connect an HDMI cable to the display device and the HDMI output
port on the rear of the transmitter. See “Viewing WirelessHD content” on
the back of this sheet for information on switching between wireless and
wired display modes.
PowerLite
®
Home Cinema 5040UB/5040UBe