Epson 4000 Quick Reference Guide
Epson 4000 - Stylus Pro Color Inkjet Printer Manual
 |
UPC - 010343848337
View all Epson 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson 4000 manual content summary:
- Epson 4000 | Quick Reference Guide - Page 1
core, remove the gray adapters from the paper stops at each end. See your Printer Guide for details. 2 Position the roll as shown, then slide it onto the spindle. 10 Raise the roll paper support on top of the paper tray. Then close the roll paper cover. 6 Make sure the printer is turned on, then - Epson 4000 | Quick Reference Guide - Page 2
Make sure the printer is on and roll paper is not loaded for printing. Caution: Heavy media or very glossy media (such as EPSON Premium Glossy 7 Flip down the paper guide roller, then replace the paper tray cover and adjust its length. Note: Make sure the roll paper support is not raised. 8 Press - Epson 4000 | Quick Reference Guide - Page 3
the printer for feeding the paper. Note: Use the top manual feed slot for very glossy media (such as EPSON Pemium Glossy Photo Paper). 1 Make sure the printer is 7 Return the paper lever to the secured position. The printer grabs the paper and feeds it into printing position. 4 Insert the sheet face- - Epson 4000 | Quick Reference Guide - Page 4
sure paper is loaded in the tray. 1 Go to the Utilities in your EPSON printer driver. In Mac OS X, you'll find it in the Epson Printer Utility in the Applications folder. 2 Click the Nozzle Check icon. 3 Click Auto and follow the instructions on the screen. Note: You can also run a cleaning cycle by - Epson 4000 | Quick Reference Guide - Page 5
panel, the cartridge is empty. To replace the cartridge, first make sure the printer is on. 1 Press the ink compartment cover to open it. (full) (empty) 1 Matte Black 8 any combination of 110 ml and 220 ml cartridges. EPSON UltraChromeTM ink 110 ml Photo Black Cyan Magenta Yellow Light Cyan - Epson 4000 | Quick Reference Guide - Page 6
Ink light remains on after installing the cartridge, try removing and then reinserting it. 6 Return the ink button on the printer, then press until you see PRINTER STATUS. 2 Press Menu, then press until you see SERVICE LIFE. 3 EPSON UltraSmooth, Textured, or Velvet) • Canvas • Backlight film • Vinyl 6 - Epson 4000 | Quick Reference Guide - Page 7
Replacing Printer Parts (continued) 5 Hold down the side pin, as shown, then turn the latch . 8 Hold down its side pin and secure it with the latch. 5 Replace any ink cartridges you removed. 9 Close the top cover. The carriage returns to the home position and the cutter replacement is complete. 7 - Epson 4000 | Quick Reference Guide - Page 8
list of error messages, see your Printer Guide. Message Light Explanation Response INK LOW Ink light flashing Ink cartridge(s) are nearly empty (printing continues). Replace ink cartridge(s) indicated on LCD. See page 5. INK LOW Ink light on Ink cartridge(s) are empty (printing stops - Epson 4000 | Quick Reference Guide - Page 9
) 276-1305. Go to http: //support.epson.com to download drivers, access product documentation and troubleshooting, and get technical advice through e-mail. Contact the RIP manufacturer. EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. EPSON UltraChrome is a trademark and - Epson 4000 | Quick Reference Guide - Page 10
Control Panel Lights and Buttons Power button Pause light and button Hold for 3 seconds to cancel a print job or reset the printer. 1 2 3 4 5 6 7 8 3sec. Ink light Left arrow or Paper Source button Hold for 3 seconds to cut roll paper after printing. Menu Menu button Hold for 3 seconds to clean
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
Loading Roll Paper
Loading Roll Paper
1
Slide the black paper stop off the end of
the spindle.
Note:
To use paper with a 2-inch core, remove the
gray adapters from the paper stops at each end.
See your
Printer Guide
for details.
2
Position the roll as shown, then slide it onto
the spindle.
3
Slide the black paper stop back onto the spindle
and insert it firmly into the end of the roll.
7
Release the paper lever.
8
Hold both sides of the paper and feed it into
the slot.
9
Make sure the paper is aligned with the
OTHER
mark and the vertical line next to the arrow. Then
return the paper lever to the secured position.
4
Open the roll paper cover.
5
Place the roll paper in the printer as shown. (The
gray end of the spindle goes on the right.)
6
Make sure the printer is turned on, then press the
Paper Source button until the
or
icon
appears.
Caution:
To avoid feeding excess paper, make sure
you don’t select
when you’re using roll paper.
10
Raise the roll paper support on top of the
paper tray. Then close the roll paper cover.
Caution:
To prevent creasing the paper, remove it
from the paper path and roll it up when you’re not
printing.
1
OTHER mark
Vertical line