Epson 1730W Quick Setup
Epson 1730W - PowerLite WXGA LCD Projector Manual
 |
UPC - 010343869547
View all Epson 1730W manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson 1730W manual content summary:
- Epson 1730W | Quick Setup - Page 1
you don't see an image, press the Source Search button on the projector or the Search button on the remote control to select the image source. NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press - Epson 1730W | Quick Setup - Page 2
more information on using the remote control, see your User's Guide. Where to get help For more information about using the projector, install the User's Guide from your projector CD. Telephone Support Services To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on
-
1 -
2
 |
 |
Before using the projector, make sure you read the safety instructions in
the
User’s Guide
on your projector CD.
1
Locate the required cables:
2
Connect the computer cable to
the blue
Computer (Component Video)
port on the projector.
3
Connect the other end to your notebook’s
video-out or
monitor port.
4
Connect the power cord to the
projector, then plug the other end
into an electrical outlet.
1
Turn on your notebook.
2
Open the
A/V Mute
slide (lens cover).
NOTE:
The slide must be
opened completely.
3
Make sure the
Power
light
is orange and not flashing.
4
Press the
Power
button
to turn on the projector.
The projector beeps once,
and the
Power
light flashes
green and then stays on.
S
T
A
R
T
H
E
R
E
T
urn on your equipment
C
onnect the projector
to your notebook
Follow these instructions to connect the projector to your
notebook. For other setup options, see your
User’s Guide
.
PowerLite
®
1720/1730W
Quick Setup
VGA computer cable
1
If you’ve turned on your notebook and switched it to external display,
but you don’t see an image, press the
Source Search
button on the
projector or the
Search
button on the remote control to select the
image source.
NOTE:
If you still see a blank screen or have other display problems,
see the troubleshooting tips on the back of this sheet.
2
To raise the image, press
the foot release button
for the front adjustable
foot and lift the front.
Release the button to
lock the foot in position.
3
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or
enlarge the image.
4
If your image looks like
or
, you’ve placed the projector off
to one side of the screen at an angle. Place it directly in front of the
center of the screen, facing the screen squarely.
5
If your image looks like
or
, press the
or
button
on the projector to correct it.
A
djust the image
To shut down the projector, press the
Power
button twice and
simply unplug it. You don’t have to wait for the projector to cool off.
Turn over
Power light
Power button
Zoom
Focus
Power cord
*411482100*
*411482100*