Dell W-Series 334 330 Series Access Points Installation Guide
Dell W-Series 334 Manual
 |
View all Dell W-Series 334 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell W-Series 334 manual content summary:
- Dell W-Series 334 | 330 Series Access Points Installation Guide - Page 1
and 802.11ac 5 GHz functionality, while also supporting 802.11a/b/ g wireless services. Multi-user Multiple-in, Multiple-output (MU- 5 GHz bands. Please refer to the W-Series ArubaOS User Guide/W-Series Instant User Guide for details on restrictions. Produit réseau local radio basse puissance - Dell W-Series 334 | 330 Series Access Points Installation Guide - Page 2
Refer to the W-Series ArubaOS Quick Start Guide for instructions on locating and connecting to the controller. Pre Guide Contacting Dell Website Support Main Website Contact Information Support Website Documentation Website dell.com dell.com/contactdell dell.com /support dell.com /support/manuals
-
1 -
2
 |
 |
Dell Networking 330 Series Access Points
Installation Guide
The Dell 330 Series Wireless Access Points (W-AP334, W-IAP334, W-AP335, and
W-IAP335)support IEEE 802.11ac standards for high-performance WLAN. This
device is equipped with two dual-band radios, which provide network access and
monitor the network simultaneously. This access point delivers high-performance
802.11n 2.4 GHz and 802.11ac 5 GHz functionality, while also supporting 802.11a/b/
g wireless services. Multi-user Multiple-in, Multiple-output (MU-MIMO) is enabled
when operating in 5GHz mode for optimal performance.
The W-AP334 and W-AP335 access points work in conjunction with an Dell
controller, while the W-IAP334 and W-IAP335 access points can be configured using
a built-in virtual controller.
The 330 Series wireless access points provides the following capabilities:
IEEE 802.11a/b/g/n/ac wireless access point
IEEE 802.11a/b/g/n/ac wireless air monitor
IEEE 802.11a/b/g/n/ac spectrum monitor
Compatible with IEEE 802.3at power sources
Centralized management, configuration and upgrades
Integrated Bluetooth Low Energy (BLE) radio
Package Contents
330 Series access point
9/16" and 15/16” Ceiling Rail Adapters
Dell Networking 330 Series Access Points Installation Guide
(this document)
Dell Networking 330 Series Access Points Regulatory Compliance and Safety
Information Guide
Dell Networking W-Series Instant Quick Start Guide
(W-IAP334 and W-IAP335
only)
Dell Networking W-Series Instant Access Point Professional Installation
Supplement
(W-IAP334 only)
Software
The W-AP334 and W-AP335 access points require Dell Networking W-Series
ArubaOS 6.5.0 or higher. For additional information, refer to the
W-Series ArubaOS
User Guide
and
W-Series ArubaOS Quick Start Guide
.
The W-IAP324 and W-IAP325 remote access points require Dell Networking W-
Series Instant 4.3.0 or higher. For additional information, refer to the
W-Series
Instant User Guide
and
W-Series Instant Quick Start Guide
.
330 Series Hardware Overview
Figure 1
LEDs
LEDs
The 330 Series access points have two LEDs that indicate the system and radio
status.
The LEDs have three operating modes that can be selected in the system
management software:
Default mode: refer to
Table 1
Off mode: LEDs are off
Blink mode: LEDs blink green
Table 1: 330 Series LED Status Indicators
* Blinking: 1s on/1s off
**Flashing: off a fraction of a second every 2s
External Antenna Connectors
The W-AP334 and W-IAP334 access points are equipped with four external antenna
connectors located on the front corners of the access point (see ).
Figure 2
External Antenna Connectors
USB Interface
The 330 Series is equipped with a USB port for connectivity with cellular modems
and other USB client devices.
When powered by an 802.3at or DC power source, the USB port can supply power up
to 5W/1A.
When powered by an 802.3af source, the USB port is disabled.
Figure 3
USB Port
Console Port
The console port allows the user to connect the access point directly to a serial
terminal or laptop for local management. Connect the device to a terminal or
terminal server using an Ethernet cable.
Figure 4
Back Panel
The port is an RJ45 connector with pin-out details in .
Ethernet Ports
The back panel of the 330 Series access point is equipped with two Ethernet ports
(ENET0 and ENET1) to support wired-network connectivity.These ports support
IEEE 802.3at Power over Ethernet (PoE) compliant sources, accepting 56V DC
(nominal) as a standard powered device (PD) from power sourcing equipment, such
as a PoE midspan injector or network infrastructure that supports PoE.
Figure 5
RJ45 Gigabit Port Pin-Out
The ENET0: 100/1000/2500Base-T auto-sensing MDI/MDX RJ45 port.
The ENET1: 100/1000Base-T auto-sensing MDI/MDX RJ45 port.
Kensington Lock Slot
The 330 Series is equipped with a Kensington lock slot for additional security, shown
in
Figure 3
.
Reset Button
The reset button can be used to return the access point to factory default settings. To
reset the access point, refer to the steps below:
1.
Power off the access point.
2.
Press and hold the reset button using a small, narrow object, such as a paperclip.
3.
Power-on the access point without releasing the reset button. The power LED
will flash within 5 seconds.
4.
Release the reset button.
The power LED will flash again within 15 seconds indicating that the reset is
completed. The access point will now continue to boot with the factory default
settings.
Power
The ENET0 and ENET1 ports support PoE-in, allowing one port to draw power from
an 802.3at source.
If PoE is not available, the access point has a single 48V/28W DC power input to
support the AP-AC-48V36 AC-to-DC power adapter kit (sold separately).
When both 802.3at and DC power sources are available, the DC power source will
take precedence. The access point will simultaneously draw a minimal current from
the PoE source. In the event that the DC source fails, the access point will switch to
the 802.3at source.
The 330 Series operates without restrictions when powered by a DC or 802.3at PoE
source. In this mode the USB interface is enabled and supports up to 1A/5W to a
powered device (PD).
Before You Begin
Access Point Pre-Installation Checklist
Before installing your 330 Series access point, ensure that you have the following:
CAT5E cable or better
One of the following power sources:
IEEE 802.3at or 802.3af-compliant Power over Ethernet (PoE) source. The
PoE source can be any power source equipment (PSE) controller or midspan
PSE device
Dell AP-AC-48V36 adapter kit (sold separately)
For W-AP334 and W-AP335 only:
Dell controller provisioned on the network:
Layer 2/3 network connectivity to your access point
One of the following network services:
Aruba Discovery Protocol (ADP)
DNS server with an “A” record
DHCP Server with vendor-specific options
Note:
Inform your supplier if there are any incorrect, missing, or damaged parts. If
possible, retain the carton, including the original packing materials. Use these
materials to repack and return the unit to the supplier if needed.
CAUTION:
Dell access points are classified as radio transmission devices, and
are subject to government regulations of the host country. The network
administrator(s) is/are responsible for ensuring that configuration and operation
of this equipment meet all regulatory standards of their country/domain. For
complete list of approved channels in your country, refer to the
Dell Networking
W-Series Downloadable Regulatory Table
Release Notes
at
download.dell-pcw.com.
ATTENTION:
Les points d'accès sont considérés comme appareils de
transmission radio et sont soumis aux réglementations gouvernementales du
pays dans lequel ils sont déployés. Le ou les administrateurs réseau doivent
s'assurer que la configuration et le fonctionnement de cet équipement sont
conformes aux normes de leurs pays. De façon plus précise, les points d'accès
doivent employer des canaux adaptés à leur emplacement physique. Pour obtenir
une liste complète des canaux approuvés dans votre pays, reportez-vous aux
notes de version Dell Networking W-Series Downloadable Regulatory Table
Release Note (DRT)
à l'adresse download.dell-pcw.com.
LED
Color/State
Meaning
System Status
(Left)
Off
Device powered off
Green- Blinking*
Device booting, not ready for use
Green- Solid
Device ready for use
Green- Flashing**
Device operating in restricted mode. Meets one of
the following conditions:
Uplink negotiated in sub-optimal speed
(<1Gbps), or
Ethernet radio is in non High-Throughput (HT)
mode
Radio Status
(Right)
Off
Device powered off; or both radios disabled
Green- Solid
Both radios enabled in access mode
Green- Blinking
One radio enabled in access mode
Amber- Solid
Both radios enabled in monitor mode
Amber- Blinking
One radio enabled in access mode; one radio
disabled
Alternating
Green: one radio in access mode
Amber: one radio in monitor mode
Red: one radio in error mode
CAUTION:
The Equivalent Isotropically Radiated Power (EIRP) levels for all
external antenna devices must not exceed the regulatory limit set by the host
country/domain. Installers are required to record the antenna gain for this device
in the system management software.
ATTENTION:
Les appareils munis d'antennes externes doivent utiliser uniquement
des antennes certifiées par le fabricant. Le ou les administrateurs doivent s'assurer
que les niveaux de puissance isotrope rayonnée équivalente (PIRE) de tous les
appareils munis d'antennes externes sont conformes aux normes réglementaires
du pays/domaine hôte. Le ou les installateurs doivent enregistrer le gain d'antenne
(dBi) de cet appareil dans le logiciel de gestion du système.
ANT1
ANT0
ANT2
ANT3
2
CONSOLE
48V
0.75A
K
ENET1
ENET0
57V
600mA
USB port
DC power socket
Ethernet ports
Reset button
Kensington Lock
Console port
1000Base-T Gigabit
Ethernet Port
RJ-45 Female
Pin-Out
Signal Name
1
2
3
4
5
6
7
8
BI_DC+
BI_DC-
BI_DD+
BI_DD-
BI_DA+
BI_DA-
BI_DB+
BI_DB-
Function
Bi-directional pair +C
Bi-directional pair -C
Bi-directional pair +D
Bi-directional pair -D
Bi-directional pair +A
Bi-directional pair -A
Bi-directional pair +B
Bi-directional pair -B
Table 2
Power Modes
Power Source
Restrictions
USB
DC (AP-AC-48V36W)
No restrictions
1A/5W
PoE 802.3at
No restrictions
1A/5W
CAUTION:
FCC Statement: Improper termination of access points installed in the
United States configured to non-US model controllers is a violation of the FCC
grant of equipment authorization. Any such willful or intentional violation may
result in a requirement by the FCC for immediate termination of operation and may
be subject to forfeiture (47 CFR 1.80).
ATTENTION: Déclaration FCC l’arrêt incorrect des points d’accès installés aux
États-Unis qui sont configurés sur des contrôleurs autres que le modèle agréé
aux États-Unis est considéré comme contrevenant à l’homologation FCC. Toute
violation délibérée ou intentionnelle de cette condition peut entraîner une
injonction d’arrêt immédiat de son utilisation par la FCC et peut déboucher sur la
confiscation de l’équipement (47 CFR 1.80).
CAUTION:
EU Statement:
Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands. Please
refer to the
W-Series ArubaOS User Guide/W-Series Instant User Guide
for
details on restrictions.
Produit réseau local radio basse puissance operant dans la bande fréquence 2.4
GHz et 5 GHz. Merci de vous referrer au
W-Series ArubaOS User Guide/W-Series
Instant User Guide
pour les details des restrictions.
Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet. Weitere
Informationen bezlüglich Einschränkungen finden Sie im
W-Series ArubaOS User
Guide/W-Series Instant User Guide.
Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare riferimento
alla
W-Series ArubaOS User Guide/W-Series Instant User Guide
per avere
informazioni detagliate sulle restrizioni.