Dell W-Series 228 W-AP228 Access Point Installation Guide
Dell W-Series 228 Manual
View all Dell W-Series 228 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell W-Series 228 manual content summary:
- Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 1
GHz and 5 GHz functionality while simultaneously supporting existing 802.11a/b/g/n wireless services. The W-AP228 access point works only Console Cable Copper Lug x1 M4 x 8 Screw x1 Installation Guide (this document) NOTE: The weatherproof caps for Ethernet and Console interfaces are connected - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 2
after 1200 seconds AP ready and 10/100Mbps Ethernet link established. The LED turns off after 1200 seconds 2 Dell Networking W-AP228 Wireless Access Point | Installation Guide - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 3
1000Base-T (RJ-45) Gigabit Ethernet ports (WAN and LAN port) for wired network connectivity. The WAN port supports 802.3at Power over Ethernet (PoE), accepting 48 VDC (nominal) as a standard defined Powered Device (PD settings. Dell Networking W-AP228 Wireless Access Point | Installation Guide 3 - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 4
CAUTION: EU Statement: Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands. Please refer to the Dell Networking W-Series ArubaOS User Guide for details on restrictions. Produit réseau local radio basse puissance operant dans la bande fréquence 2.4 GHz et 5 GHz. Merci de vous referrer - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 5
2/3 network connectivity to your AP One of the following network services: Aruba Discovery Protocol (ADP) DNS server with an "A" . Refer to the Dell Networking W-Series ArubaOS Quick Start Guide for instructions on locating and connecting to the controller. Identifying Specific Installation - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 6
all Dell Networking W-Series products should be performed by trained service personnel only. Using the AP-220-MNT-W1 Mounting Kit The W-AP228 access point can be installed kit. Figure 5 Attaching the Adapter to a Wall AP-220_11 6 Dell Networking W-AP228 Wireless Access Point | Installation Guide - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 7
clockwise until it clicks into place (see Figure 7). Figure 7 Attaching the AP to the Mounting Bracket AP-220_14 Dell Networking W-AP228 Wireless Access Point | Installation Guide 7 - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 8
ring over the cable. 3. Using a crimping tool, attach the shielded RJ45 connector to the end of the cable. 8 Dell Networking W-AP228 Wireless Access Point | Installation Guide - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 9
AP is receiving power and initializing successfully (see Table 1 and Table 2). Refer to the Dell Networking W-Series ArubaOS Quick Start Guide for details on verifying post-installation network connectivity. Configuring the AP AP Provisioning/Reprovisioning Provisioning parameters are unique to each - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 10
Interfaces MDI/MDX Power over Ethernet (IEEE 802.3at compliant), 48VDC(nominal) /0.6A Power POE support on WAN port: 802.3at-compliant POE sourcing devices Environmental Operating Temperature: -40ºC to 60ºC (- .com. 10 Dell Networking W-AP228 Wireless Access Point | Installation Guide - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 11
radio frequency energy and, if not installed and used in accordance with the manufacturer's instructions, may cause interference harmful to radio communications. If this equipment does cause interference, viewing on dell.com. Dell Networking W-AP228 Wireless Access Point | Installation Guide 11 - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 12
shown here. The Environment- Friendly Use Period is valid only when the product is operated under the conditions defined in the product manual. India RoHS This product complies with RoHS requirements as prescribed by E-Waste (Management & Handling) Rules, governed by the Ministry of Environment - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 13
5 GHz operations. this transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. Dell Networking W-AP228 Wireless Access Point | Installation Guide 13 - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 14
de l'émetteur. Gain d'antenne: 7,4dBi for 2,4G band; 9,1dBi for 5G band; Type d'antenne: 50 ohm, directionnel. 14 Dell Networking W-AP228 Wireless Access Point | Installation Guide - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 15
This page is intentionally left blank. Dell Networking W-AP228 Wireless Access Point | Installation Guide 15 - Dell W-Series 228 | W-AP228 Access Point Installation Guide - Page 16
Website Documentation Website dell.com dell.com/contactdell dell.com/support dell.com/support/manuals Copyright © 2015 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba vendors. Dell Networking W-AP228 Wireless Access Point | Installation Guide Part Number 0511757-02 | April 2015
Dell Networking W-AP228 Wireless Access Point
Installation Guide
0511757-02
| April 2015
1
The W-AP228 is a temperature-hardened, water-resistant, indoor-rated, dual-radio IEEE 802.11ac wireless access
point (AP). This access point use MIMO (Multiple-Input, Multiple-Output) technology and other high-
throughput mode techniques to deliver high-performance, 802.11ac 2.4 GHz and 5 GHz functionality while
simultaneously supporting existing 802.11a/b/g/n wireless services. The W-AP228 access point works only in
conjunction with a Dell Networking W-Series controller.
W-AP228 Features
Wireless transceiver
Wireless access point (IEEE 802.11 a/b/g/n/ac)
Wireless air monitor (IEEE 802.11 a/b/g/n/ac)
Protocol-independent networking functionality
Compatibility with IEEE 802.3at PoE
Central management configuration and upgrades with a Dell controller.
Guide Overview
“W-AP228 Hardware Overview” on page
2
provides detailed hardware overview of the W-AP228 access point.
“Before You Begin” on page
4
provides key questions to ask and items to consider when deploying a wireless
network.
“Installing the AP” on page
6
describes the multi-step process for successful installation and deployment of
the W-AP228 access point.
“Safety and Regulatory Compliance” on page
11
provides safety and regulatory compliance information.
Package Contents
W-AP228 Access Point
Cable Glands x2
USB Console Cable
Copper Lug x1
M4 x 8 Screw x1
Installation Guide (this document)
NOTE:
The weatherproof caps for Ethernet and Console interfaces are connected to the AP in the package.
NOTE:
Mounting kits for use with the W-AP228 access point are sold separately. Contact your Dell sales representative for details.
NOTE:
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including the
original packing materials. Use these materials to repack and return the unit to the supplier if needed.