Dell W-Series 228 Instant 6.4.3.1-4.2 CLI Guide
Dell W-Series 228 Manual
View all Dell W-Series 228 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell W-Series 228 manual content summary:
- Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 1
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 Command-Line Interface Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 2
logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. All other trademarks are the 0511771-01 | August 2015 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 3
table describes command modes and platforms for which this command is applicable. The commands are listed in alphabetical order. Intended Audience This guide is intended for customers who configure and use Dell Networking W-Series Instant (W-IAP). Related Documents In addition to this document, the - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 4
to the left, enter only one choice. Do not type the braces or bars. The following informational icons are used throughout this guide: Indicates helpful suggestions, pertinent information, and important things to remember. Indicates a risk of damage to your hardware or loss of data. Indicates - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 5
Contacting Dell Table 2: Support Information Support Main Website Contact Information Support Website Documentation Website dell.com dell.com/contactdell dell.com/support dell.com/support/manuals Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide About this Guide | 5 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 6
the rogue APs detected in the W-IAP network. web-server Allows you to configure web server and enable or disable the TLS protocol. 6 | About this Guide Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 7
now includes parameters for locking and unlocking SIM PIN for the 3G/4G modems that support the SIM lock feature. clear-cert This command now allows you to clear RadSec and proxy-server l explicit-ageout-client Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide About this - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 8
for administrators. xml-api-server This command now allows you to configure multiple XML API server entries and also edit or delete them. 8 | About this Guide Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 9
changes configured in a CLI session are saved in the CLI context. The CLI does not support the configuration data exceeding the 4K buffer size in a CLI session: therefore, it is recommended the privileged mode: Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide Instant CLI | 9 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 10
PPPoE user configuration settings: (Instant AP)(config) # pppoe-uplink-profile (Instant AP)(pppoe_uplink_profile)# no pppoe-username 10 | Instant CLI Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 11
Sequence Sensitive Commands The Instant CLI does not support positioning or precedence of sequence-sensitive commands. Therefore a reboot of the W-IAP, as they may cause a momentary disruption in service as the unit resets. The reload command resets a W-IAP. Dell Networking W-Series Instant - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 12
the first space encountered. Ctrl X Delete Left Delete all characters to the left of the cursor. 12 | Instant CLI Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 13
for example, 00:05:4e:50:14:aa). Service Set Identifier (SSID) A unique character string ( is case-sensitive (for example, WLAN-01). Basic Service Set Identifier (BSSID) This entry is the unique same format as for a MAC address. Extended Service Set Typically the unique logical name of a - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 14
code in which the W-IAP operates. The country code and the W-IAP hardware may support significantly lower transmission power values than 127dBm and in such cases, the transmission power limit set channel 44 18 14 | a-channel Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 15
Command History Version Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide a-channel | 15 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 16
or calculate additional attenuation between the device and antenna before configuring the antenna gain. To know if your AP device supports external antenna connectors, see the Install Guide that is shipped along with the AP device. EIRP and Antenna Gain The following formula can be used to calculate - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 17
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide a-external-antenna | 17 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 18
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 18 | aaa test-server Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 19
Version Description Dell Networking W-Series Instant 6.2.1.0- Command was introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide aeroscout-rtls | 19 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 20
device to the available services. 1-24 cppm-server support is enabled for AirGroup enabled devices. When mdns-only command is executed with enable, the Bonjour support is enabled for AirGroup enabled devices. enable-guest-multicast Allows the users to use the Bonjour - or DLNA services - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 21
Use this command to configure the AirGroup, the availability of the AirGroup services, and ClearPass Policy Manager (CPPM) servers. Example The following example configures This command is introduced. 3.3 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide airgroup | 21 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 22
Command Information W-IAP Platform All platforms Command Mode Configuration mode and AirGroup configuration sub-mode. 22 | airgroup Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 23
local network. l DLNA Media-Applications such as Windows Media Player use this service to browse and play media content on a remote device. l DLNA Print-This service is used by printers that support DLNA. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide airgroupservice | 23 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 24
all services or add custom services. Up to 10 services can be configured on a W-IAP. Adds a description to the AirGroup service profile. - Disables AirGroup services for This command is introduced. 3.3 24 | airgroupservice Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 25
Command Information W-IAP Platform All platforms Command Mode Configuration mode and AirGroup services configuration submode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide airgroupservice | 25 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 26
RTLS - server. Configures the port for the W-AirWave RTLS server. - Configures key for service authorization. - Configures the frequency at which packets are sent to 5 the RTLS server in is introduced. 26 | airwave-rtls Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 27
Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide airwave-rtls | 27 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 28
Instant 6.3.1.1-4.0 This command is introduced. Command Information W-IAP Platform All platforms Command Mode Configuration mode 28 | ale-report-interval Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 29
configuration parameter. Usage Guidelines Use this command to enable a W-IAP for ALE support. Example The following example configures the ALE server details: (Instant AP)(config)# Mode Configuration mode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ale-server | 29 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 30
is introduced. Command Information W-IAP Platform All platforms Command Mode Configuration mode and ALG configuration sub-mode. 30 | alg Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 31
Dell Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide allow-new-aps | 31 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 32
Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Configuration mode 32 | allowed-ap Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 33
Dell Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ams-backup-ip | 33 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 34
W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 34 | ams-identity Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 35
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ams-ip | 35 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 36
the specified configuration parameter. Usage Guidelines Use this command to assign a shared key for service authorization. This shared key is used for configuring the first AP in the W-IAP Configuration mode 36 | ams-key Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 37
Networking W-Series Instant 6.4.0.2-4.1 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide apply | 37 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 38
the use of 80 MHz channels on APs with 5GHz radios, which support a very high throughput. NOTE: Only the APs that support 802.11ac can be configured with 80 MHz channels. Range - Default defaultaccess 38 | arm Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 39
current RSSI, the client will be moved to the W-IAP with the higher RSSI for better performance and client Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide arm | 39 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 40
Description Range Default experience. In the current release, the client match feature is supported only within the W-IAPs within the swarm. calc-interval Configures an 1 match. 1- Channel- based 40 | arm Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 41
the maximum transmission EIRP configured on an AP is not supported by the AP model, the value is reduced to the highest supported power setting. NOTE: Higher power level settings may be adjacent channels that are bonded Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide arm | 41 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 42
. Example The following example configures an ARM profile: (Instant AP)(config)# arm (Instant AP)(ARM)# 80mhz-support (Instant AP)(ARM)# a-channels 44 (Instant AP)(ARM)# min-tx-power 18 (Instant AP)(ARM)# max sub-mode. 42 | arm Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 43
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration and Attack configuration sub-mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide attack | 43 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 44
6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 44 | auth-failure-blacklist-time Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 45
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide auth-survivability cache-time-out | 45 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 46
blacklist-client no... Description This command allows you to manually blacklist the clients by using MAC addresses of the clients. Syntax Parameter blacklist Command Mode Configuration mode 46 | blacklist-client Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 47
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide blacklist-time | 47 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 48
surveillance. Depending on the country of operation, the service providers (SPs) are required to support LI in their respective networks. In the United W-IAPs for CALEA integration, see Dell Networking W-Series Instant User Guide. Example The following example configures a CALEA profile: (Instant AP - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 49
command is introduced. 3.4 Command Information W-IAP Platform All platforms Command Mode Configuration mode and access rule configuration sub-mode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide calea | 49 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 50
PIN for the SIM card. - Specifies the authentication type for USB. PAP, CHAP Default - - - - - - - PAP 50 | cellular-uplink-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 51
configure a cellular uplink profile on a W-IAP and modem parameters 3G /4G uplink provisioning. Instant supports the use of 3G/4G USB modems to provide Internet backhaul to an Instant network. The 3G/ Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide cellular-uplink-profile | 51 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 52
Types of Modems The following 3G modems are supported: l USBConnect 881 (Sierra 881U) l Quicksilver (Globetrotter ICON 322) l UM100C (UTstarcom) l Icon 452 l Aircard 250U 597(Sierra) (Sprint) 52 | cellular-uplink-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 53
(HK CSL/1010) l ZTE MF633/MF636 (Telstra (Aus)) l ZTE MF637 (Orange in Israel) l Huawei E180, E1692,E1762 (Optus (Aus)) Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide cellular-uplink-profile | 53 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 54
(Germany)) l Huawei D41HW l ZTE AC2726 The following table lists the supported 4G modems. l Netgear U340 l Netgear Aircard 341u l Fraklin Wireless u770 3G network only, manually set the USB type to pantech-3g. To configure the UML290 for the 4G network only, manually set the 4G CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 55
is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode and cellular uplink profile configuration sub-mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide cellular-uplink-profile | 55 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 56
command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 56 | clear airgroup state statistics Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 57
Networking WSeries Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide clear | 57 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 58
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 58 | clear-cert Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 59
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide clock set | 59 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 60
configuration - Usage Guidelines Use this command to configure daylight saving for the timezones that support daylight saving. When enabled, the daylight saving time ensures that the W-IAPs reflect end 60 | clock summer-time Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 61
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide clock summer-time | 61 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 62
hours offset from the Universal Time Clock (UTC). Removes the timezone configuration. Range All supported timezones - - - Usage Guidelines Use this command to set the timezone on a W-IAP Configuration mode 62 | clock timezone Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 63
The changes configured in a CLI session are saved in the CLI context. The CLI does not support the configuration data exceeding the 4K buffer size in a CLI session: therefore, Dell recommends that EXEC mode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide commit | 63 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 64
64 | commit Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 65
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide configure terminal | 65 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 66
Instant 6.4.0.2- This command is introduced. 4.1 Command Information W-IAP Platform All platforms Command Mode Console configuration sub mode 66 | console Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 67
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide content-filtering | 67 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 68
ArubaOS 6.1.4 or later. For more information, see the Converting a W-IAP to a Remote AP and Campus AP topic in Dell Networking WSeries Instant User Guide. Example The following command allows you to convert a W-IAP to a remote AP: (Instant AP)# convert-aos-ap RAP 192.0.2.5 Command History Version - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 69
. Copies the CA certificate used for 802.1X authentication from the TFTP server. Indicates the system partition file extensions. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide copy | 69 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 70
was introduced. This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 70 | copy Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 71
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide deny-inter-user-bridging | 71 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 72
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 72 | deny-local-routing Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 73
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide device-id | 73 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 74
6.2.1.0-3.3 This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 74 | disable-prov-ssid Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 75
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide disconnect-user | 75 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 76
6.4.3.1-4.2.0.0 This command was introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode. 76 | dot11a-radio-disable Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 77
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 This command was introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide dot11g-radio-disable | 77 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 78
HTTP URL. Allows you to specify the certificate format. The following types of certificate formats are supported: l CA certificate-PEM or DER format l Authentication server-PEM format with PSK l Captive portal 78 | download-cert Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 79
cp parameter was introduced. This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide download-cert | 79 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 80
and wireless clients associated with a W-IAP. AppRF supports an application and web-filtering service that allows creating firewall policies based on types of -filtering options, see Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 User Guide and the wlan access-rule command page. The application and - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 81
Description Dell Networking W-Series Instant 6.4.3.1- This command is introduced. 4.2 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide dpi-error-page-url | 81 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 82
Instant 6.2.1.0-3.4.0.0 This command is introduced. Command Information W-IAP Platform All platforms Command Mode Configuration mode 82 | dynamic-cpu-mgmt Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 83
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide dynamic-radius-proxy | 83 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 84
W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 84 | enet-vlan Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 85
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide enet0-bridging | 85 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 86
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 86 | enet0-port-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 87
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide enet1-port-profile | 87 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 88
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 88 | enet2-port-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 89
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide enet3-port-profile | 89 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 90
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 90 | enet4-port-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 91
. With the Extended SSID option enabled, you can create up to 16 WLANs. The following W-IAPs support 16 WLANs: l W-IAP3WNP l W-IAP134 l W-IAP135 The number of SSIDs that become active on Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide extended-ssid | 91 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 92
Networking W-Series Instant 6.4.2.x- This command is introduced. 4.1.1.x Command Information W-IAP Platform All platforms Command Mode Configuration mode 92 | facebook Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 93
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide factory-ssid-enable | 93 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 94
a W-IAP: (Instant AP)(config)# firewall-external-enforcement pan (Instant AP)(firewall-external-enforcement pan)# enable 94 | firewall-external-enforcement Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 95
6.3.1.1- This command is introduced. 4.0 Command Information W-IAP Platform All platforms Command Mode Configuration mode and firewall-external-enforcement submode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide firewall-external-enforcement | 95 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 96
code in which the W-IAP operates. The country code and the W-IAP hardware may support significantly lower transmission power values than 127dBm and in such cases, the transmission power limit set introduced. 3.3 96 | g-channel Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 97
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide g-channel | 97 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 98
or calculate additional attenuation between the device and antenna before configuring the antenna gain. To know if your AP device supports external antenna connectors, see the Install Guide that is shipped along with the AP device. EIRP and Antenna Gain The following formula can be used to calculate - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 99
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide g-external-antenna | 99 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 100
6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 100 | gre per-ap-tunnel Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 101
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide gre primary | 101 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 102
W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 102 | gre type Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 103
is provided when an abbreviated argument is entered and you want to know what arguments match the input (e.g. 'show w?'.) Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide help | 103 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 104
Command History Version Dell Networking WSeries Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 104 | help Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 105
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hostname | 105 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 106
Cellular Network for hotspots. The IE defined in this profile will be sent in a Generic Advertisement Service (GAS) query response from a W-IAP in a cellular network hotspot. The 3GPP Mobile Country hotspot anqp-3gpp-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 107
introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode and the 3GPP hotspot profile configuration sub-mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot anqp-3gpp-profile | 107 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 108
to configure a domain name in the ANQP Domain Name profile. If a client uses the Generic Advertisement Service (GAS) to post an ANQP query to a W-IAP, the W-IAP will return an ANQP Information | hotspot anqp-domain-name-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 109
Access network Query Protocol (ANQP) information element in a Generic Advertisement Service (GAS) query response. Syntax Parameter Description hotspot anqp-ip-addr-avail . 3.3 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot anqp-ip-addr-avail-profile | 109 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 110
Command Information W-IAP Platform All platforms Command Mode Configuration mode and the ANQP IP address availability profile configuration sub-mode 110 | hotspot anqp-ip-addr-avail-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 111
an Access network Query Protocol (ANQP) information element in a Generic Advertisement Service (GAS) query response. Syntax Parameter hotspot anqp-nairealm-profile - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 112
-eap, reserved nai-realm-eap-method Configures an EAP method for NAI realm. 112 | hotspot anqp-nai-realm-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 113
for the NAI realm. The realm name is - often the domain name of the service provider. Removes any existing configuration. - Usage Guidelines Use this command to configure an commit apply Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot anqp-nai-realm-profile | 113 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 114
platforms Command Mode Configuration mode and the NAI realm profile configuration sub-mode 114 | hotspot anqp-nai-realm-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 115
IP address, FQDN or URL. l online-enrollment-When configured, the network supports the online enrollment. l http-redirect-When configured, additional information on the network . - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot anqp-nwk-auth-profile | 115 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 116
Command Mode Configuration mode and the ANQP network authentication profile configuration sub-mode 116 | hotspot anqp-nwk-auth-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 117
an Access network Query Protocol (ANQP) information element in a Generic Advertisement Service (GAS) query response. Syntax Parameter hotspot anqp-roam-cons-profile - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 118
Command Mode Configuration mode and the ANQP roaming consortium profile configuration sub-mode 118 | hotspot anqp-roam-cons-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 119
network Query Protocol (ANQP) information element in a Generic Advertisement Service (GAS) query response. Syntax Parameter hotspot anqpvenue-nameprofile - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 120
advertised in the IEs. The complete list of supported venue types is described in hotspot anqp-venue-nameprofile ANQP Venue Name profile. If a client uses the Generic Advertisement Service (GAS) to post an ANQP query to an Access Point, W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 121
l unspecified l hospital l long-term-care l alc-drug-rehab l group-home l prison-or-jail l unspecified l retail-store l grocery-market l auto-service-station l shopping-mall l gas-station l unspecified l muni-mesh-network l city-park Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 122
apply Command History Version Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 122 | hotspot anqp-venue-name-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 123
Command Information W-IAP Platform All platforms Command Mode Configuration mode and the ANQP venue name profile configuration sub-mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot anqp-venue-name-profile | 123 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 124
, 4500 and 0) Enables the UDP VoIP port. (port 5060) Removes any existing configuration. 124 | hotspot h2qp-conn-cap-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 125
. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode and the H2QP connection capability profile configuration sub-mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot h2qp-conn-cap-profile | 125 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 126
apply Command History Version Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 126 | hotspot h2qp-oper-name-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 127
Command Information W-IAP Platform All platforms Command Mode Configuration mode and the H2QP operator friendly name profile configuration sub-mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot h2qp-oper-name-profile | 127 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 128
apply Command History Version Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 128 | hotspot h2qp-oper-class-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 129
Command Information W-IAP Platform All platforms Command Mode Configuration mode and the H2QP operating class profile configuration sub-mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot h2qp-oper-class-profile | 129 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 130
same speed in - - both the uplink and downlink directions. Removes any existing configuration. - - 130 | hotspot h2qp-wan-metrics-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 131
-metrics "Wan1")# end (Instant AP)# commit apply Command History Version Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot h2qp-wan-metrics-profile | 131 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 132
Command Information W-IAP Platform All platforms Command Mode Configuration mode and the H2QP WAN metrics profile configuration sub-mode 132 | hotspot h2qp-wan-metrics-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 133
Description This command configures a hotspot profile for an 802.11u public access service provider. Syntax Parameter Description Range Default access-network-type Configures Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot hs-profile | 133 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 134
subscription-based Internet access in a coffee shop or a hotel offering chargeable inroom Internet access service. The corresponding integer value for this network type is 2. l free-public-This network is type is 15. Default Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 135
additional roaming consortium Organization Identifiers (OIs) advertised by the AP. This feature supports up to three additional OIs, which are defined using the roam-cons-oi . Default - - - - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot hs-profile | 135 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 136
Internet access. By default, a hotspot profile does not advertise network internet access. Removes any existing - configuration. Advertises support for P2P Cross - Connections. Default - - 500 - - - - Disabled 136 | hotspot hs-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 137
-len-1 roam-cons-len-2 Description Range Default Advertises support for P2P - device management. Disabled Enables the Pre of the Generic Advertisement Service (GAS query response. GAS enables advertisement services that allow the clients to CLI Reference Guide hotspot hs-profile | 137 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 138
-roam-cons- parameter is set to 1 or higher. NOTE: The service provider's own roaming consortium OI is configured using the hotspot anqp-roam-cons-profile command. venue 138 | hotspot hs-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 139
associated with this hotspot profile. The complete list of supported venue types is described in Venue Types on page 140 Service (GAS) query to the AP to request more information more about the network before associating. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 140
from the AP to the client to identify the AP's network and service provider. If a client requests this information via a GAS query, sends the ANQP Capability list in the GAS Initial Response frame indicating support for the following IEs: l Venue Name - Defined using the hotspot CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 141
is 1. institutional The associated numeric value is 5. l unspecified-The associated numeric value is 0. l hospital-The associated numeric value is 1. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot hs-profile | 141 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 142
associated numeric value is 1. l grocery-market-The associated numeric value is 2. l auto-service-station-The associated numeric value is 3. l shopping-mall-The associated numeric value is 4. profile: 142 | hotspot hs-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 143
command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode and the hotspot profile configuration submode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide hotspot hs-profile | 143 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 144
W-IAP as a master W-IAP. Removes the configuration. Usage Guidelines Use this command to manually provision a W-IAP as a master W-IAP. Example The following example provisions a master IAP Privileged EXEC mode 144 | iap-master Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 145
-deauth-broadcast wired-containment wireless-containment no... no ids Description This command configures an IDS policy for a W-IAP. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ids | 145 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 146
. Enables detection of ChopChop attack. - - Enables detection of client flood attack. - - Enables detection of CTS rate anomaly. - - 146 | ids Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 147
-assoc-req Enables detection of malformed - association requests. detect-malformed-frame- Enables detection of malformed - auth authentication frames Default - - - - - - - - - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ids | 147 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 148
station - - bridging. Enables detection of wireless bridging. - - Sets the infrastructure detection level. off, low, off medium, high 148 | ids Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 149
associate to an AP classified as a rogue are disconnected through a denial of service attack. signature-airjack Enables signature matching for the - - AirJack frame type. Controls Wired attacks. - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ids | 149 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 150
or disable these options accordingly. The following levels of detection can be configured: l Off l Low l Medium l High 150 | ids Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 151
AP)(IDS)# protect-valid-sta (Instant AP)(IDS)# protect-windows-bridge (Instant AP)(IDS)# end (Instant AP)# commit apply Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ids | 151 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 152
is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode and IDS configuration sub-mode. 152 | ids Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 153
Dell Networking W-Series Instant 6.3.1.1- This command is introduced. 4.0 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ignore-image-check | 153 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 154
command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Default 1000 - 154 | inactivity-ap-timeout Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 155
: any protocol l tcp: Transmission Control Protocol l udp: User Datagram Protocol 1-255 Specifies the starting port number from 1-65534 Default - - - - - - - - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide inbound-firewall | 155 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 156
IP changes to the outgoing interface IP address (implied NAT pool) or from the pool configured (manual NAT pool). Specifies the destination NAT IP address - for the specified packets when dst-nat action 156 | inbound-firewall Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 157
6.4.0.2- This command is introduced. 4.1 Command Information W-IAP Platform All platforms Command Mode Configuration mode and inbound firewall configuration submode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide inbound-firewall | 157 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 158
introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode and domains configuration sub-mode 158 | internal-domains Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 159
Networking WSeries Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ip-address | 159 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 160
the IP address range defined for a DHCP scope. For example, if 20 IP addresses are Default - - - 160 | ip dhcp Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 161
a public network and a local LAN or WAN network at the same time through the same physical network connection. Default - - - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ip dhcp | 161 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 162
router and subnet mask. The configured IP range is divided into blocks based on the Default - - - - - 162 | ip dhcp Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 163
- - DHCP option to use. You can configure up to eight DHCP options supported by the DHCP server and enter the option value in "" not exceeding 255 characters. option82 and distributed,l3 DHCP Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ip dhcp | 163 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 164
)(DHCP Profile"corpNetwork1")# ip dhcp server-type distributed,l2 (Instant AP)(DHCP Profile"corpNetwork1")# server-vlan 1 164 | ip dhcp Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 165
command is introduced. Command Information W-IAP Platform All platforms Command Mode Configuration mode and IP DHCP profile configuration submode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ip dhcp | 165 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 166
DHCP pool subnet and address range to provide simultaneous access to more number of clients. The pool can support up to 2048 addresses. The default size of the IP address pool is 512. When a W-IAP receives apply 166 | ip dhcp pool Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 167
command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode and IP DHCP configuration sub-mode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ip dhcp pool | 167 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 168
L2TP data. Example The following example configures the L2TPv3 session: (Instant AP)(config) # l2tpv3 session test_session 168 | l2tpv3 session Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 169
introduced. 3.4 Command Information W-IAP Platform W-IAP108 W-IAP109 W-IAP135 Command Mode Configuration mode and L2TPV3 session profile configuration sub-mode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide l2tpv3 session | 169 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 170
(in seconds) at which hello packets are routed in the tunnel. 5-300 Default - - - preemptive 0 60 60 170 | l2tpv3 tunnel Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 171
Profile "test_tunnel")# end (Instant AP) # commit apply Command History Version Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.4 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide l2tpv3 tunnel | 171 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 172
Command Information W-IAP Platform W-IAP108 W-IAP109 W-IAP135 Command Mode Configuration mode and L2TPV3 tunnel configuration sub-mode. 172 | l2tpv3 tunnel Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 173
be configured for each W-IAP cluster. Configures the IP address for the subnets - support in a W-IAP cluster. Specifies the subnet mask. - Assigns the VLAN applicable to Default - Disabled - - - - - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide l3-mobility | 173 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 174
. Command Information W-IAP Platform All platforms Command Mode Configuration mode and L3 mobility configuration sub-mode. 174 | l3-mobility Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 175
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide led-off | 175 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 176
Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 176 | logout Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 177
password Denotes the user credentials set by the user to enable automatic configuration. no... Removes the configuration. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide managed-mode-profile | 177 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 178
Instant 6.4.3.1- This command is introduced. 4.2.0.0 Command Information W-IAP Platform All platforms Command Mode Configuration mode 178 | managed-mode-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 179
Description Dell Networking W-Series Instant 6.4.3.1- This command is introduced. 4.2.0.0 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide managed-mode-sync-server | 179 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 180
the best path to the mesh portal. Instant mesh functionality is supported only on dual radio W-IAPs only. On dual-radio W-IAPs, while the 2.4 GHz radio is always used for client traffic. Mesh service is automatically enabled on 802.11a band for dual-radio W-IAP only, | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 181
Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide mesh | 181 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 182
IP address sending the request to account for the usage of the authorized network services. Example The following example configures a TACACS+ server for management accounting (Instant Configuration mode 182 | mgmt-accounting Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 183
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide mgmt-auth-server | 183 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 184
command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 184 | mgmt-auth-server-load-balancing Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 185
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide mgmt-auth-server-local-backup | 185 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 186
W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 186 | mgmt-user Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 187
Description Dell Networking W-Series Instant 6.4.3.1- This command is introduced. 4.2 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide mtu | 187 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 188
Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 188 | name Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 189
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ntp-server | 189 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 190
Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 190 | opendns Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 191
the installation personnel on the site. Example The following command configures a W-AirWave organization string: (Instant AP)(config)# organization dell Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide organization | 191 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 192
Command History Version Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 192 | organization Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 193
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide ping | 193 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 194
log into the DSL network. pppoe-svcname Specifies the PPPoE service provided by your service provider. pppoe-chapsecret Configures a secret key used for Challenge apply 194 | pppoe-uplink-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 195
Description This command is modified. This command is introduced. Command Mode Configuration mode and PPPoE uplink profile configuration submode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide pppoe-uplink-profile | 195 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 196
Networking W-Series Instant 6.3.1.1- This command is introduced. 4.0 Command Information W-IAP Platform All platforms Command Mode Configuration mode 196 | proxy Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 197
configuration changes or under the guidance of Dell Networks customer support. The reload command powers down the W-IAP, making or through an SSH, Telnet, or UI session. If you need to troubleshoot the W-IAP during a reboot, use a local console connection. After you CLI Reference Guide reload | 197 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 198
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 198 | reload Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 199
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide remove-blacklist-client | 199 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 200
Instant 6.3.1.1- This command is introduced. 4.0 Command Information W-IAP Platform All platforms Command Mode Configuration mode 200 | restrict-corp-access Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 201
Description Dell Networking W-Series Instant 6.3.1.1- This command is introduced. 4.0 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide restricted-mgmt-access | 201 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 202
power increase that makes a radio aware that it has received a packet. Default - 100 2 Disabled 2 202 | rf dot11a-radio-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 203
the - channel to monitor for 5 GHz configuration. Allows the W-IAPs in access mode to continue - Default Disabled 3 dBm 3 dBm 0 - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide rf dot11a-radio-profile | 203 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 204
Parameter no... Description Range with normal access service to clients, while performing additional function of monitoring RF interference (from both neighboring APs and configuration sub-mode 204 | rf dot11a-radio-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 205
by controlling the amount of power increase that makes a radio aware that it has received a packet. Default - 100 2 Disabled 2 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide rf dot11g-radio-profile | 205 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 206
distance of 16km. Allows the W-IAPs in access mode to continue - with normal access service to clients, while performing additional function of monitoring RF interference (from both neighboring APs and | rf dot11g-radio-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 207
is introduced. Command Information W-IAP Platform All platforms Command Mode Configuration mode and RF dot11g Radio Profile sub-mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide rf dot11g-radio-profile | 207 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 208
W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 208 | rf-band Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 209
MAC-addr> phy mcs Description Allows you to run RF troubleshooting commands Allows you to test the antenna connectivity Allows you to test Run these commands only under the supervision of a Dell support representative. In this release, this command is not available Reference Guide rft | 209 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 210
Command Information W-IAP Platform All platforms except W-IAP224/225, and W-IAP274/275 Command Mode Privileged EXEC mode 210 | rft Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 211
)(Routing-profile)# end (Instant AP)# commit apply Command History Version Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide routing-profile | 211 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 212
Command Information W-IAP Platform All platforms Command Mode Configuration mode and routing profile configuration sub-mode. 212 | routing-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 213
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show 1xcert | 213 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 214
:http://www.dell.com Legal :Copyright (c) 2002-2015, Aruba Networks, Inc. Service Tag :N/A Cloud Activation Key: Command History Version Dell Networking W-Series Instant 6.2.1.0-3.3 Privileged EXEC mode 214 | show about Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 215
-udp permit any any match dhcp permit any any match app bebo deny any any match app babylon deny Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show access-rule | 215 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 216
It indicates whether a particular type of traffic is allowed to a particular destination, and the service and protocol in use and if options such as logging and prioritizing traffic are enabled when the 216 | show access-rule Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 217
disable upstream disable Access Rule Name :NewRole18 In Use :No The output of this command includes the following parameters: Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show access-rule-all | 217 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 218
command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 218 | show access-rule-all Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 219
Networking W-Series Instant 6.4.0.2-4.1 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show acl | 219 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 220
blocked-queries [dlna Displays blocked queries if any. |mdns] blocked-service-id [dlna| mdns] Displays blocked services and service IDs if any. cache cache entries [dlna| mdns as follows: 220 | show airgroup Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 221
service-id The show airgroup blocked-service-id command output displays the blocked AirGroup service IDs if any: AirGroup Blocked Service IDs Origin Service ID #response-hits Num Blocked Service expire. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show airgroup | 221 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 222
configured to be RFC 3576 compliant only. Indicates the port number used for sending AirGroup CoA. 222 | show airgroup Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 223
the show airgroup debug statistics command: Airgroup slave status :TRUE Airgroup master status :TRUE Airgroup multi swarm status :TRUE Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show airgroup | 223 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 224
airgroup internal-state statistics command: Time: Fri May 16 09:30:22 2014 RADIUS Client Messages 224 | show airgroup Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 225
messages. show airgroup servers The following output is displayed for the show airgroup servers command: AirGroup Servers MAC IP Type Host Name Service VLAN Wired/Wireless Role Group Username AP-Name Num Servers: 0, Max Servers: 80. The output of this command provides the following information - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 226
Indicates the hostname of the AirGroup servers. Indicates if AirGroup services such as AirPlay or AirPrint are configured. Displays VLAN details servers. Displays the maximum number of servers that are supported. show airgroup status The following output is displayed for | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 227
dead time 100 Seconds AirGroup Service Information Service Status airplay Disabled airprint Disabled if the AirGroup feature such as DLNA or MDNS support is enabled. AirGroup Multi Swarm status Indicates if Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show airgroup | 227 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 228
modified. This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 228 | show airgroup Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 229
will not be able to use the AirGroup service. Usage Guidelines Use the show airgroupservice command to view the AirGroup services configured on a W-IAP. Examples The following ssh._tcp _ftp. _tcp Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show airgroupservice | 229 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 230
id._tcp chat Chat Disabled _pre sence._tcp Chromecast Chromecast Disabled urn: dial-multiscreen-org:service:dial:1 urn: dial-multiscreen-org:device:dial:1 DLNA Media Media Disabled urn: schemas- 200 230 | show airgroupservice Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 231
This command is modified. This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show airgroupservice | 231 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 232
for the show airgroupservice-ids command for the AirPlay service: (Instant AP)# show airgroupservice-ids airplay airplay ------Service ids ----------_airplay._tcp _raop._tcp _appletv-v2._tcp The | show airgroupservice-ids Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 233
ALE server status and data request status. Command History Version Dell Networking W-Series Instant 6.3.1.1-4.0 Description This command is introduced. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ale | 233 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 234
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 234 | show ale Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 235
clients are connected to the Instant network. Alerts are generated when a client encounters problems while accessing or connecting to the W-IAP network. Example The show alerts global is connected. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show alert global | 235 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 236
4 Unsupported 802.11 rate The AP cannot allow this client to associate because it does not support the 802.11 rate requested by this client. 5 Maximum capacity reached on W-IAP The AP has client. 236 | show alert global Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 237
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show alert global | 237 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 238
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 238 | show alg Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 239
Networking WSeries Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show allowed-aps | 239 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 240
command is introduced. Instant 6.4.0.2-4.1 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 240 | show all monitor Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 241
-roam-cons-profile "rc1" enable roam-cons-oi-len 3 roam-cons-oi "888888" hotspot anqp-3gpp-profile "3g" enable Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show amp-audit | 241 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 242
dot11k dot11v wlan ssid-profile ssid1 enable index 1 type employee essid hsProf opmode wpa2-aes 242 | show amp-audit Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 243
-pkt-lost-cnt 10 failover-internet-pkt-send-freq 30 failover-vpn-timeout 180 airgroup disable airgroupservice airplay disable Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show amp-audit | 243 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 244
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 244 | show amp-audit Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 245
Networking WSeries Instant 6.4.0.2-4.1 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap-alert | 245 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 246
. This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 246 | show ap-env Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 247
monitor modes. Indicates if spectrum monitoring is enabled or disabled. Indicates the number of client associated with the W-IAP. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show aps | 247 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 248
scanning requirements. Displays the counters that indicate the number of scanning rejects due to voice traffic. 248 | show aps Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 249
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show aps | 249 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 250
Networking W-Series Instant 6.2.1.0-3.3 Description The parameter was removed. This command is introduced. 250 | show ap allowed-channels Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 251
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap allowed-channels | 251 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 252
is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 252 | show ap allowed-max-EIRP Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 253
output of this command includes the following information: Column Interface Description Displays the Wi-F interface configured on the W-IAP. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap arm | 253 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 254
:39 157+ 149+ 27 27 I 2013-05-10 10:49:33 149+ 157+ 27 27 I 254 | show ap arm Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 255
of the channel changes for each interface. Displays the channel number used by the W-IAP before the ARM change. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap arm | 255 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 256
status of W-IAP neighbors. Displays details of last updates if any. Displays a summary if updates. 256 | show ap arm Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 257
output of this command includes the following information: Column channel Description Displays the list of channels enabled on a W-IAP. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap arm | 257 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 258
function as Air Monitors. Indicates the time since the channel and power assignment was verified. 258 | show ap arm Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 259
Default 1 11- 0 172161700 next-scan-milli-tick (jitter) scans (Tot:Rej:Eff(%):Last intvl 172172520(4420) 17627:0:100:100 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap arm | 259 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 260
Indicates the current channel scanned. last-dos-channel Indicates the last channel on which Denial of Service (DOS) was detected. timer-milli-tick Indicates the time in milliseconds since the Wi-Fi . 260 | show ap arm Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 261
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap arm | 261 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 262
W-IAP or the AP group. Indicates Basic Service Set Identifier (BSSID) associated with the W-IAP. The Basic Service Set Identifier (BSSID) is usually the MAC Indicates the name that uniquely identifies the W-IAP's Extended Service Set Identifier (ESSID). 262 | show ap association Dell Networking - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 263
Networking WSeries Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap association | 263 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 264
ip phy type Description Displays the AP Basic Service Set Identifier (BSSID). This is usually the MAC address of the AP. Displays the AP Extended Service Set Identifier (ESSID). Displays port used by the 264 | show ap bss-table Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 265
Networking WSeries Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap bss-table | 265 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 266
:Nov 8 00:00:00 2006 GMT Expires On :Jul 16 23:59:59 2036 GMT 266 | show ap cacert Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 267
Networking W-Series Instant Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap cacert | 267 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 268
match succeed 0 5m:17s Deny Normal Client match succeed 1 5m:17s Total 7 Records 268 | show ap client-match-history Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 269
Dell Networking W-Series This command is introduced. Instant 6.3.1.1-4.0 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap client-match-history | 269 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 270
is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 270 | show ap client-match-live Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 271
Networking W-Series Instant 6.3.1.1-4.0 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap client-probe-report | 271 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 272
:27:10:cf:ef:b4 27 2 5 00:27:10:cf:f2:4c 18 1 6 272 | show ap client-match-refused Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 273
Command History Version Dell Networking W-Series Instant 6.3.1.1-4.0 Command Information W-IAP Platform All platforms Description This command is introduced. Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap client-match-refused | 273 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 274
l Client Capability Match For more information on client match and client match trigger conditions, see Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 User Guide. Example The following example shows the output of the show ap client-match-triggers command: Client Match Triggers Station PHY - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 275
Dell Networking W-Series Instant This command is introduced. 6.4.0.2-4.1 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap client-match-triggers | 275 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 276
4s 13s 9m:8s 5m:7s 19s 6s 4s 3m:6s Total 1 Client Matches 276 | show ap client-view Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 277
Command History Version Dell Networking W-Series Instant 6.3.1.1-4.0 Command Information W-IAP Platform All platforms Description This command is introduced. Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap client-view | 277 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 278
command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 278 | show ap debug airwave Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 279
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug airwave-config-received | 279 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 280
introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 280 | show ap debug airwave-data-sent Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 281
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug airwave-events-pending | 281 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 282
introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 282 | show ap debug airwave-restore-status Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 283
the W-AirWave sign on key used by the used by the administrator to manually authorize the first Virtual Controller for an organization. Usage Guidelines Use this command to EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug airwave-signon-key | 283 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 284
:29:88 48- 22 0 1 284 | show ap debug airwave-state Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 285
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug airwave-state | 285 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 286
is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 286 | show ap debug airwave-stats Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 287
Watermark 0 Frame Non Unicast Rate High Watermark 0 Frame Non Unicast Rate Low Watermark 0 Frame Receive Error Rate High Watermark 0 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug am-config | 287 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 288
is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 288 | show ap debug am-config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 289
specific MAC address. Usage Guidelines Use the output of this command to troubleshoot authentication errors. Include the parameter to filter data by the MAC as encryption and WPA type. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug auth-trace-buf | 289 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 290
introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 290 | show ap debug auth-trace-buf Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 291
Dell Networking W-Series Instant 6.3.1.1- This command is introduced. 4.0 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug client-match | 291 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 292
5 2 15 0 Receive specific Statistics 31 28 25 22 32 30 28 21 5 4 2932 292 | show ap debug client-stats Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 293
in the output of the command. Tx WMM [BE]: Best Effort Tx WMM [BK]: Background Tx WMM [VO]: VoIP Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug client-stats | 293 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 294
of management frames received. Shows the number of power save poll frames received. 294 | show ap debug client-stats Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 295
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug client-stats | 295 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 296
wireless network. Filters the W-IAP Config table by BSSID. The Basic Service Set Identifier (BSSID) is usually the AP's MAC address. Shows whether 11n) transmission type: l none: AP is a legacy AP that does not support the 802.11n standard. l 20Mhz: A high-throughput APs using a single Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 297
category. If UAPSD is disabled for this access category, this value is 0. l Max SP: The maximum service period is the number of frame sent per trigger packet. This value is value can be 0, 2, 4 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug client-table | 297 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 298
introduced. 4.1.1 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 298 | show ap debug client-frame-history Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 299
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug crash-info | 299 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 300
client. Command History Version Dell Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. 300 | show ap debug dhcp-packets Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 301
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug dhcp-packets | 301 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 302
any. Displays the number of supplementary NAKs. Displays the unicast key rotation details. 302 | show ap debug dot1x-statistics Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 303
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug dot1x-statistics | 303 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 304
Aware Scan Enabled Load aware Scan Threshold 1048576 Bps 40 MHz intolerance Disabled 304 | show ap debug driver-config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 305
of spatial streams usable for STBC reception 1 Maximum number of spatial streams usable for STBC transmission 1 MPDU Aggregation Enabled Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug driver-config | 305 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 306
in 20 MHz mode Enabled Short guard interval in 40 MHz mode Enabled Supported MCS set Explicit Transmit Beamforming Disabled Transmit Beamforming Compressed Steering Disabled Transmit 306 | show ap debug driver-config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 307
such as status and other relevant details. Command History Version Dell Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug mgmt-frames | 307 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 308
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 308 | show ap debug mgmt-frames Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 309
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug persistent-clients | 309 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 310
(Mon) 0 Tx Data Bytes 36 Mbps (Mon) 0 Tx Data Bytes 54 Mbps (Mon) 0 310 | show ap debug radio-stats Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 311
associated with the transmission and reception parameters. Command History Version Dell Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug radio-stats | 311 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 312
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 312 | show ap debug radio-stats Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 313
configured on a W-IAP. RADIUS Statistics Statistics ---------In Service: Management Auth In Service: Example1 Accounting Requests Raw Requests PAP Requests CHAP Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug radius-statistics | 313 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 314
Service: OCSPTEST In Service: Management Auth In Service: IPFHUNTV In Service: __wired__eth1 In Service: IPFHUN In Service: IPFHUNGuest In Service: booth-psk-225 In Service: booth-open-205 In Service: IPFNET In Service statistics Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 315
ID 0 0 Bad Authenticator 0 0 Invalid Request 0 0 Packets Dropped 0 0 Unknown service 0 0 CoA Requests 0 0 CoA Accepts 0 0 CoA Rejects 0 0 No permission Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug rfc3576-radius-statistics | 315 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 316
the association index value. Represents the credits the station has to transmit tokens. 316 | show ap debug shaping-table Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 317
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug shaping-table | 317 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 318
downlink ports, regardless of forwarding mode. STP will not operate on the uplink port and is supported only on W-IAPs with three or more ports. Example The following example shows the output displayed show ap debug spanning-tree Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 319
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug stm-config | 319 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 320
is introduced. 4.1 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 320 | show ap debug stm-role Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 321
IAP. Usage Guidelines Use this command under the guidance of Dell technical support to troubleshoot network issues. The output of this command displays the following types of EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap debug system-status | 321 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 322
configured on a W-IAP. Tacacs Statistics Statistics ---------In Service: Management Auth In Service: Test1 In Service: ssid1 Accounting Requests Authen Requests Author Requests Authen 322 | show ap debug tacacs-statistics Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 323
Dell Networking W-Series Instant 6.4.0.2- This command is introduced. 4.1 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap dot11k-beacon-report | 323 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 324
command is introduced. 4.1 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 324 | show ap dot11k-nbrs Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 325
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap flash-config | 325 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 326
data in the Mesh Packet Counters table shows counter values for an individual interface. 326 | show ap mesh counters Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 327
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap mesh counters | 327 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 328
more congested than a path with a lower value.) For a mesh point, the path cost is 328 | show ap mesh link Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 329
Networking W-Series Instant 6.2.1.03.3 This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap mesh link | 329 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 330
the sum of the (parent path cost) + (the parent node cost) + (the link cost). 330 | show ap mesh neighbors Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 331
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap mesh neighbors | 331 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 332
l Last Tagged Wired Containment Timer Tick l Spoof frames sent l Spoof frames sent on tagged VLAN 332 | show ap monitor Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 333
the Potential AP table. The Potential AP table shows the following data: l bssid: the AP's Basic Service Set Identifier. l channel: The AP's current radio channel l phy type: The radio's PHY type. . Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap monitor | 333 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 334
arp-cache command: br0:10.17.88.188 ARP Cache Table mac ip vlanid age 334 | show ap monitor Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 335
ap monitor pot-ap-list The following example shows the output of show ap monitor pot-ap-list command. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap monitor | 335 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 336
Scan Completed yes DOS Channel Count 0 Current Channel 149+ Current Scan Channel 153Current Channel Index 9 336 | show ap monitor Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 337
Type Stats bcast-pkt bcast-byte mcast-pkt mcast-byte ucast-pkt ucast-byte 000000 Frame Size Packet Stats Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap monitor | 337 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 338
:a0 enable 2660 4 1 0 0 WLAN Interface bssid scan monitor probe-type phy-type task channel pkts 338 | show ap monitor Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 339
about the potential wireless devices. l Scanned information for the W-IAP. l Configuration and status of monitor information of the W-IAP. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap monitor | 339 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 340
6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 340 | show ap monitor Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 341
Dell Networking W-Series This command is introduced. Instant 6.3.1.1-4.0 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap pmkcache | 341 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 342
:0, Coming:0 Command History Version Description Dell Networking W-Series This command is introduced. Instant 6.3.1.1-4.0 342 | show ap virtual-beacon-report Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 343
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ap virtual-beacon-report | 343 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 344
2000 sips 6 5061 5061 sip-tcp 6 5060 5060 sip-udp 17 5060 5060 smb-tcp 6 445 445 smb-udp 17 445 445 344 | show app-services Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 345
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show app-services | 345 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 346
enable 161 enable 165 enable 36+ enable 44+ enable 52+ disable 60+ disable 149+ enable 346 | show arm-channels Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 347
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show arm-channels | 347 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 348
Channels Channel Status 36 enable 40 enable 44 enable 48 enable 52 enable 56 enable 348 | show arm config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 349
the 2.4 GHz and 5 GHz bands. Indicates if the channels in the 2.4 GHz and 5 GHz bands are enabled or disabled. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show arm config | 349 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 350
Command History Version Description Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 350 | show arm config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 351
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show arp | 351 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 352
send check counter 1628 Command History Version Dell Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. 352 | show attack Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 353
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show attack | 353 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 354
cached by the W-IAP. Displays the log details for troubleshooting. The count attribute allows you to specify the number of feature is enabled. The authentication survivability feature supports a survivable authentication framework against the remote link Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 355
Information W-IAP Platform All platforms Description This command was modified. This command is introduced. Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show auth-survivability | 355 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 356
-band all allow-new-aps allowed-ap d8:c7:c8:c4:42:98 arm wide-bands 5ghz 80mhz-support min-tx-power 18 max-tx-power 127 band-steering-mode prefer-5ghz air-time-fairness-mode fair -whitelist-disable https 356 | show backup-config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 357
W-Series Instant 6.4.0.24.1 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show backup-config | 357 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 358
for the show blacklist-client config command: Blacklist Time :3600 Auth Failure Blacklist Time :3600 Manually Blacklisted Clients MAC Time --- ---00:24:6c:ca:41:51 14:46:18 Dynamically Blacklisted . 358 | show blacklist-client Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 359
Blacklisted clients Displays the details of clients that are blacklisted manually. Dynamically Blacklisted Clients Displays the list of clients that dynamically Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show blacklist-client | 359 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 360
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 360 | show calea config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 361
Networking W-Series Instant 6.2.1.0-3.4 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show calea statistics | 361 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 362
for the internal captive portal splash page. Indicates if the authentication is successful and acknowledged. 362 | show captive-portal Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 363
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show captive-portal | 363 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 364
command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 364 | show captive-portal-domains Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 365
type usb-type usb-dev usb-tty usb-init usb-auth-type PAP usb-user usb-passwd usb-dial usb-modeswitch modem-isp modem-country Supported Country list Country list -----------France NZ Israel HK Sweden Spain China UK norway Germany Croatia Aus Saudi-Arabia Japan India Dell Networking W-Series Instant - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 366
Canada Supported ISP this command includes the following parameters: Parameters type value Supported Country list ISP List Description Displays the type of cellular Lists the countries that support cellular deployment. Lists the service providers that support cellular connections. The following - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 367
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show cellular | 367 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 368
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 368 | show cert all Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 369
wired command. The client list in the command output for both wireless and wired clients provides the following information: Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show clients | 369 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 370
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 370 | show clients Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 371
W-IAP from which the client has roamed and IP address of the W-IAP to which the client is roamed. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show clients | 371 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 372
This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 372 | show clients Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 373
all The following example shows the partial output of show clock timezone all command: Support Timezones Country Timezone DST Name DST Recurring International-Date-Line-West UTC-11 Coordinated- information: Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show clock | 373 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 374
the W-IAP. Config mode Configures the summer-time for the daylight savings time settings. Config mode 374 | show clock Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 375
Command History Version Dell Networking W-Series Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Description This command is introduced. Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show clock | 375 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 376
any match any any any permit hotspot anqp-nai-realm-profile "test" enable nai-realm-name "" 376 | show configuration Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 377
0 type employee essid profile-1 wpa-passphrase c52acfeb3e59ef254a6d14fe2ad565382e46f7eecde33af3 opmode wpa2-psk-aes max-authentication-failures 0 vlan 333 rf-band all Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show configuration | 377 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 378
guest captive-portal disable no dot1x wired-port-profile default_wired_port_profile switchport-mode trunk allowed-vlan all 378 | show configuration Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 379
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show configuration | 379 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 380
6.4.0.2- This command is introduced. 4.1 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 380 | show config-status Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 381
Dell Networking W-Series Instant 6.4.0.2- This command is introduced. 4.1 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show console-settings | 381 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 382
-codes Description This command shows the list of supported country codes for the W-IAP. Usage Guidelines Use this command to view a list of the supported country codes. Example The following example shows a | show country-codes Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 383
:Bosnia and Herzegovina MK:Macedonia MI:Maritime Offshore MB:Maritime Forward Operating Base KZ:Kazakhstan TD:Chad ML:Mali Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show country-codes | 383 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 384
Description Dell Networking W-Series The output of the command displays a list of supported country codes Instant 6.4.3.1-4.2 only. Dell Networking W-Series This command is introduced EXEC mode 384 | show country-codes Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 385
Networking W-Series Instant 6.2.1.0-3.4 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show cpcert | 385 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 386
Description Include this optional parameter at the request of Dell technical support to display additional CPU troubleshooting statistics. Usage Guidelines Use this command to view CPU load of CPU utilization. 386 | show cpu Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 387
Command History Version Dell Networking W-Series Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Description This command is introduced. Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show cpu | 387 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 388
traffic. Usage Guidelines Use the show datapath command to display various datapath statistics for debugging purposes 388 | show datapath Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 389
.0 255.255.254.0 any 6 0-65535 8081-8081 PS4 16: any any 6 0-65535 8081-8081 P4 17: any any any 4 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show datapath | 389 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 390
.0.0.0 224.0.0.0 any P4 4: 192.168.10.0 255.255.254.0 any any PS4 5: any any any P4 390 | show datapath Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 391
show datapath dmo-station The following example shows the output of show datapath dmo-station command. Group Ref_count Position Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show datapath | 391 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 392
.13.23.237 6 22 55302 0 0 0 0 dev3 8be 10.0.0.1 10.17.88.59 6 443 64104 0 0 0 1 local 5b Y 392 | show datapath Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 393
18 Frames to DNS 0 Frames held 0 Frames needed routing 715572 Frames needed forwarding 634373 Frames redirected to CSS tunnel 0 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show datapath | 393 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 394
. l VLAN table information such as VLAN memberships inside the datapath including L2 tunnels for the W-IAP. 394 | show datapath Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 395
6.3.1.1-4.0 Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show datapath | 395 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 396
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 396 | show delta-config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 397
Networking W-Series Instant 6.2.1.0-3.4 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show derivation-rules | 397 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 398
command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 398 | show dhcp-allocation Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 399
Networking WSeries Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show dhcpc-opts | 399 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 400
: Parameter Name type Description Displays the name of the DHCP scope. Displays the DHCP assignment modes. The current release of Instant supports the following DHCP assignment modes. l Distributed, L2 l Distributed, L3 l Local l Local, L3 400 | show dhcps config Dell Networking W-Series Instant - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 401
is enabled or disabled. Indicates the DHCP host name if configured. Indicates if DNS caching is enabled or disabled. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show dhcps config | 401 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 402
6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 402 | show dhcps config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 403
. Displays the role assigned to the clients. Command History Version Description Dell Networking W-Series Instant 6.4.0.2- This command is introduced. 4.1 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show dhcp subnets | 403 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 404
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 404 | show dhcp subnets Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 405
on the type of the DHCP scope specified. The current release of Instant supports the following distributed DHCP assignment modes. l Distributed, L2 l Distributed, L3 is introduced. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show distributed-dhcp-branch-counts | 405 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 406
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 406 | show distributed-dhcp-branch-counts Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 407
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show domain-names | 407 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 408
that can be used for debugging. qsessions [detail [] webcategory Displays the list of web dpi appcategory all 408 | show dpi Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 409
transfer 8 instant-messaging 9 mail-protocols 10 mobile-app-store 11 network-service 12 peer-to-peer 13 social-networking 14 standard 15 streaming 16 thin 834(4) 424(2) 22(2) 123(2) 145(4) 141(2) Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show dpi | 409 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 410
Categories Name Web Category ID ---- real-estate 1 computer-and-internet-security 2 financial-services 3 business-and-economy 4 computer-and-internet-info 5 auctions 6 shopping 7 50 410 | show dpi Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 411
: 0 Category: internet-portals(51) Confidence level: 98 Command History Version Dell Networking W-Series Instant 6.4.0.2-4.1 Description This command is introduced. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show dpi | 411 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 412
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 412 | show dpi Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 413
Networking W-Series Instant 6.4.3.1-4.2 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show dpi-error-page-url | 413 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 414
timestamp 17:10:47 Dpi Top Application list App AppId Total bytes --- apple 306 10172 414 | show dpi-stats Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 415
) Not-Classified(0) Not-Classified (0) 152 0 10.17.139.167 windowslive(298) internet-portals(51) trustworthy-sites(5) 5907 8635 893 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show dpi-stats | 415 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 416
. This command is modified. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 416 | show dpi-stats Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 417
beacons required. Displays the number of ARP spoof attacks detected. Displays the MAC address of the last spoof detected. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show election | 417 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 418
Command History Version Dell Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 418 | show election Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 419
frame overlay configuration settings. This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show external-captive-portal | 419 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 420
6.4.2.x4.1.1.x This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 420 | show facebook Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 421
. Provides a short description of the event details. Command History Version Dell Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show fault | 421 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 422
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 422 | show fault Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 423
20MZ 17:38:49 00:24:6c:80:4f:88 ethersphere-wpa2 Interfering 52 AN 40MZ 17:40:20 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ids | 423 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 424
Instant 6.2.1.0-3.3 This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 424 | show ids Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 425
-attack disable disable disable enable detect-tkip-replay-attack disable disable disable enable signature-airjack disable disable disable enable Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ids-detection config | 425 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 426
is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 426 | show ids-detection config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 427
level for a policy is set to high. Command History Version Dell Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ids-protection config | 427 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 428
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 428 | show ids-protection config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 429
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show image | 429 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 430
type of traffic is to allowed to a particular destination from the source subnet, and the service and protocol in use. It also indicates if other options such as logging and prioritizing traffic 430 | show inbound-firewall-rules Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 431
errors during packet receive. Shows total number of CRC errors during packet receive. Shows total length of the error. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show interface counters | 431 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 432
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 432 | show interface counters Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 433
Dell Networking W-Series Instant 6.4.0.2-4.1 The output of this command was modified. Dell Networking W-Series Instant 6.2.1.0-3.3 This command is introduced. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ip dhcp database | 433 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 434
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 434 | show ip dhcp database Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 435
specific to a multicast address. Member Indicates the IP address of the member associated with the specified multicast group address. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ip igmp | 435 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 436
command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 436 | show ip igmp Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 437
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ip interface brief | 437 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 438
packets are routed. Command History Version Description Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 438 | show ip route Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 439
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ip route | 439 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 440
This command is introduced. Command Information W-IAP Platform W-IAP220 Series Command Mode Privileged EXEC mode 440 | show lacp status Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 441
. Displays the value for the tunnel MTU. Displays the message digest to be used to create the MD AVP. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show l2tpv3 config | 441 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 442
.4 This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 442 | show l2tpv3 config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 443
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.4 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show l2tpv3 global | 443 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 444
command is introduced. Instant 6.2.1.0-3.4 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 444 | show l2tpv3 session Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 445
received, type of message, and so on. Command History Version Dell Networking W-Series Instant 6.2.1.0-3.4 Description This command is introduced. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show l2tpv3 system | 445 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 446
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 446 | show l2tpv3 system Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 447
: aruba1600pop636635.hsbtst2.aus UDP ports: local 1701, peer 3000 session limit: 0, session count: 1 tunnel profile: test_tunnel_primary, peer profile: default Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show l2tpv3 tunnel | 447 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 448
command is introduced. Instant 6.4.3.1-4.2.0.0 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 448 | show l2tpv3 tunnel Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 449
information: Column Flags Type Description Indicates if any L3 mobility features are enabled. Indicates the type of the flag. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show l3-mobility | 449 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 450
- Displays the device ID. l Remote Protocol - Indicates the remote protocol used by the roaming clients. 450 | show l3-mobility Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 451
of the L3 mobility event. Indicates the MAC address of the roaming clients. Provides a description of the mobility event. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show l3-mobility | 451 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 452
ID. remote tunnel ID, tunnel count, and the type of tunnel used for routing packets. 452 | show l3-mobility Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 453
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show l3-mobility | 453 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 454
server. For Active Directory, the value is sAMAccountName Indicates if the server is in use. 454 | show ldap-servers Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 455
Command History Version Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show ldap-servers | 455 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 456
command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 456 | show log ap-debug Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 457
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show log apifmgr | 457 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 458
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 458 | show log convert Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 459
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show log debug | 459 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 460
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 460 | show log driver Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 461
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show log kernel | 461 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 462
IP address of the W-IAP in the home subnet, to which the client is 462 | show log l3-mobility Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 463
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show log l3-mobility | 463 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 464
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 464 | show log network Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 465
Dell Networking W-Series Instant This command is introduced. 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show log pppd | 465 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 466
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 466 | show log rapper Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 467
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show log sapd | 467 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 468
6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 468 | show log security Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 469
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show log system | 469 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 470
command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 470 | show log upgrade Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 471
Dell Networking W-Series Instant 6.2.1.0-3.3 This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show log user | 471 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 472
command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 472 | show log user-debug Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 473
Dell Networking W-Series Instant 6.2.1.0-3.3 This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show log vpn-tunnel | 473 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 474
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 474 | show log wireless Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 475
kB VmallocUsed: 39452 kB VmallocChunk: 449532 kB Command History Version Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show memory | 475 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 476
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 476 | show memory Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 477
sent to the RADIUS server. Displays the IP address of the Network Access Server (NAS) if NAS is configured. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show mgmt-user | 477 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 478
. This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 478 | show mgmt-user Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 479
:Disabled LEAP Use Session Key :Disabled Broadcast-filter :none Max Authentication Failures :0 Blacklisting :Disabled WISPr :Disabled Accounting mode :Authentication Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show network | 479 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 480
6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 480 | show network Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 481
Networking W-Series Instant 6.4.0.2-4.1 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show network-summary | 481 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 482
open DNS configuration details for a W-IAP. Syntax Parameter support Description Displays if the OpenDNS credentials if the OpenDNS service is configured on the W-IAP. Usage Guidelines Use this EXEC mode 482 | show opendns Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 483
Networking WSeries Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platforms All platforms Command Mode Privileged Exec mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show port status | 483 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 484
Configuration Type Value ---- ----User user Password d226ccefac5a95cd6bb04ca74f20473eae9085fb16892b66 Service name ServiceA CHAP secret 8acc867926ad85681fd0b0c1a15bb818 Unnumbered dhcp profile is introduced. 484 | show pppoe Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 485
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show pppoe | 485 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 486
This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform Command Mode All platforms Privileged EXEC mode 486 | show process Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 487
Networking W-Series Instant 6.3.1.1-4.0 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show proxy config | 487 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 488
more information on configuring immunity levels, see rf dot11a-radio-profile and rf dot11g-radioprofile. 488 | show radio config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 489
is enabled. When enabled, the WIAPs in access mode continue with normal access service to clients, while performing additional function of monitoring RF interference (from both neighboring EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show radio config | 489 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 490
Example The following example shows the output of show radius-servers support command: RADIUS Servers Name ---InternalServer IP Address ---------127.0.0.1 Port for one RADIUS request. 490 | show radius-servers support Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 491
This command is modified. This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show radius-servers support | 491 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 492
connection tried at Indicates the time stamp during which the last connection between the server 492 | show radius status Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 493
Dell Networking W-Series Instant 6.4.2.3- This command is introduced. 4.1.2.0 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show radius status | 493 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 494
6.4.3.1-4.2 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 494 | show radseccert Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 495
all allow-new-aps allowed-ap d8:c7:c8:c4:42:98 arm wide-bands 5ghz 80mhz-support min-tx-power 18 max-tx-power 127 band-steering-mode prefer-5ghz air-time-fairness-mode essid instant opmode opensystem Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show running-config | 495 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 496
-vpn-timeout 180 airgroup disable airgroupservice airplay disable description AirPlay airgroupservice airprint disable description AirPrint 496 | show running-config Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 497
Command History Version Dell Networking W-Series Instant 6.2.1.03.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show running-config | 497 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 498
address generating the SNM trap. Displays the SNMP version for which the trap is generated. 498 | show snmp-configuration Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 499
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show snmp-configuration | 499 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 500
command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 500 | show snmp trap-queue Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 501
Dell Networking W-Series Instant 6.2.1.0-3.3 This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show spectrum-alert | 501 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 502
> command: Util Level:good Noise Level:good Error Level:good 2.4 GHz Channel:7 5.0 GHz Channel:149+ Usage ----- 502 | show stats Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 503
:16 47 0 0 0 170 0 0 6 00:31:46 47 0 1 0 5946 0 0 6 00:31:16 49 0 0 0 316 0 0 6 Mobility Trail Association Time Access Point Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show stats | 503 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 504
] (fps) Frames [In] (fps) Throughput [Out] (bps) Throughput [In] (bps 16:39:25 0 0 0 0 0 16:38:55 0 0 0 0 0 504 | show stats Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 505
Overall Limit: :Unlimited Per-user Limit: :Unlimited Access Control Type: :Role Machine-only Role: :test1 User-only Role: :test1 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show stats | 505 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 506
:localhost Port :80 URL :/ Authentication Text:Authenticated External Captive Portal Redirect URL: Server Fail Through:No 506 | show stats Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 507
Command History Version Description Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform Command Mode All platforms Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show stats | 507 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 508
(Instant AP) (config) # show subscription-aps IAP controlled by Cloud-Server:disable subscription enabled by manually :disable Subscription Ap List MAC Address Status d8:c7:c8:c4:56:de ACTIVE d8:c7:c8: | show subscription-aps Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 509
Parameter support Description Shows the difference in configuration. Shows the summary support containing the configuration details used by support. Command History Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show summary | 509 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 510
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 510 | show swarm Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 511
formats. Usage Guidelines Use this command to view the list certificate formats supported by the W-IAP. Examples Server Certificate Formats Name ---PEM CA Certificate Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show supported-cert-formats | 511 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 512
attention and correction. l Critical-Any critical conditions, for example, hard drive error. l Errors-Error conditions. 512 | show syslog-level Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 513
Networking WSeries Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show syslog-level | 513 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 514
command is introduced. Instant 6.4.0.2-4.1 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 514 | show tacacs-servers Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 515
and the associated configuration details, which can be used by the technical support representatives for debugging. Usage Guidelines Use this command to view and analyze Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show tech-support | 515 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 516
6.4.3.1- This command is introduced. 4.2 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 516 | show tspec-calls Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 517
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show uncommitted-config | 517 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 518
a successful upgrade. Indicates if an external URL can be used for loading an image file. 518 | show upgrade info Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 519
Command History Version Description Dell Networking W-Series Instant 6.2.1.03.3 This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show upgrade info | 519 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 520
show uplink status command: Uplink preemption :enable Uplink enforce :none Ethernet uplink eth0 :DHCP Uplink Table 520 | show uplink Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 521
Indicates if the packets are lost continuously. VPN down time Indicates the time since the VPN connection is unavailable. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show uplink | 521 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 522
Command History Version Description Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 522 | show uplink Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 523
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform Command Mode All platforms Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show uplink-vlan | 523 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 524
6.4.3.1- This command is introduced. 4.2 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 524 | show usb status Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 525
of the users. Indicates the attributes Command History Version Description Dell Networking W-Series Instant 6.2.1.03.3 This command is introduced. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show users | 525 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 526
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 526 | show users Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 527
153 157 161 165 36+ 44+ 52+ 60+ 149+ 157+ The output of this command provides the following information: Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show valid-channels | 527 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 528
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 528 | show valid-channels Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 529
Dell Networking W-Series This command is introduced. Instant 6.2.1.0-3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show version | 529 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 530
commands: l vpn primary l vpn backup l vpn preemption l vpn fast-failover l vpn gre-outside l vpn hold-time 530 | show vpn Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 531
command output is modified. This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show vpn | 531 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 532
who do not sign up for the Internet service can view the "allowed" websites (typically hotel property websites). The website names must be DNS-based and support the option to define wildcards. This works for | show walled-garden Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 533
. Displays the encryption settings configured for the Wi-Fi uplink. For example, wpa-tkip-psk or wpa2-ccmp-psk. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show wifi-uplink | 533 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 534
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 534 | show wifi-uplink Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 535
Address NAS Identifier RFC3576 LDAP Servers -----------Name IP Address Port Timeout Retry Count Admin-DN Admin Password Base-DN Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show wired-port | 535 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 536
This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 536 | show wired-port Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 537
to as Native VLAN. Indicates the status of admin port. Indicates the role assigned to the wired profile users. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show wired-port-settings | 537 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 538
command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 538 | show wired-port-settings Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 539
show wispr config show wispr config Description This command displays the Wireless Internet Service Provider roaming (WISPr) authentication parameters configured on a W-IAP. Usage Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide show wispr config | 539 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 540
command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 540 | show xml-api-server Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 541
AP)(config)# snmp-server community user123 (Instant AP)(config)# snmp-server host 10.0.0.1 version 2c udp-port 162 inform Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide snmp-server | 541 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 542
Command History Version Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 542 | snmp-server Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 543
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide subscription-ap | 543 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 544
6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 544 | subscription-ap-enable Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 545
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide swarm-mode | 545 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 546
Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 546 | syslocation Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 547
about the system configuration and status. - - Generates a log for the W-IAP clients. - - Generates a detailed log about the clients for - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide syslog-level | 547 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 548
W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 548 | syslog-level Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 549
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide syslog-server | 549 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 550
W-Series Instant 6.3.1.1- This command is introduced. 4.0 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode. 550 | telnet Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 551
Description Dell Networking W-Series Instant 6.3.1.1- This command is introduced. 4.0 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide telnet-server | 551 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 552
W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 552 | terminal-access Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 553
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide tftp-dump-server | 553 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 554
Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode. 554 | traceroute Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 555
-class W-IAP cluster: (Instant AP)# upgrade-image2 Orion@tftp://192.168.0.1/mips32.ari;Cassiopeia@tftp://192.168.0.1/armv5te.ari Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide upgrade-image | 555 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 556
Command History Version Description Dell Networking W-Series Instant 6.2.1.0- These commands are introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode. 556 | upgrade-image Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 557
to a different connection. Disabled The number of seconds after 0-3600 10 which the Internet based uplink verification times out. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide uplink | 557 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 558
the wired profiles, the W-IAP tries to find an alternate Ethernet link based on the priority configured. 558 | uplink Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 559
lower priority uplink if the current uplink is down. Uplink Switching based on VPN Status Instant supports switching uplinks based on the VPN status when deploying mixed uplinks (Eth0, 3G/4G,Wi-Fi AP)# commit apply Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide uplink | 559 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 560
is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode and uplink configuration sub-mode. 560 | uplink Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 561
Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide uplink-vlan | 561 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 562
6.4.3.1- This command is introduced. 4.2 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 562 | usb-port-disable Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 563
configured as an internal RADIUS server. The local user database of APs can support up to 512 user entries except W-IAP-9x supports only 256 user entries. If there are already 512 users, W-IAP-9x is introduced. 3.3 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide user | 563 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 564
Command Information W-IAP Platform All platforms Command Mode Configuration mode 564 | user Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 565
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide version | 565 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 566
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 566 | virtual-controller-country Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 567
Description Dell Networking W-Series Instant 6.4.3.1- This command is introduced. 4.2 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide virtual-controller-dnsip | 567 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 568
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 568 | virtual-controller-ip Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 569
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide virtual-controller-key | 569 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 570
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 570 | virtual-controller-vlan Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 571
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide vpn backup | 571 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 572
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 572 | vpn fast-failover Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 573
Description Dell Networking W-Series Instant 6.3.1.1- This command is introduced. 4.0 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide vpn gre-outside | 573 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 574
Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 574 | vpn hold-time Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 575
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide vpn ikepsk | 575 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 576
command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 576 | vpn monitor-pkt-lost-cnt Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 577
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide vpn monitor-pkt-send-freq | 577 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 578
W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode 578 | vpn preemption Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 579
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide vpn primary | 579 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 580
command is introduced. 3.4 Command Information W-IAP Platform All platforms Command Mode Configuration mode 580 | vpn reconnect-time-on-failover Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 581
Description Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.4 Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide vpn reconnect-user-on-failover | 581 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 582
Instant 6.4.3.1-4.2 Description This command was introduced. Command Information W-IAP Platform All platforms Command Mode Configuration mode 582 | web-server Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 583
NOTE: In Monitor and Spectrum Monitor modes, the W-IAP does not provide access services to clients. access, monitor, spectrummonitor Default access Usage Guidelines Use this command to is introduced. 3.3 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wifi0-mode | 583 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 584
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode. 584 | wifi0-mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 585
NOTE: In Monitor and Spectrum Monitor modes, the W-IAP does not provide access services to clients. access, monitor, spectrummonitor Default access Usage Guidelines Use this command to is introduced. 3.3 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wifi1-mode | 585 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 586
Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode. 586 | wifi1-mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 587
VLAN refers to the VLANs carried by the port in Access mode. You can configure the list of Default - - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wired-port-profile | 587 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 588
have a VLAN ID tag in the frames is 1-4093 - - Disabled auto 1000 seconds Disabled Disabled - 588 | wired-port-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 589
load balancing across - two RADIUS servers if two authentication servers are configured for the SSID. Default Enabled - userauthentication - - Enabled Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wired-port-profile | 589 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 590
different rights to clients based on whether their hardware device supports machine authentication. Machine authentication is only supported on Windows devices, so this can be used to Default - - - - 590 | wired-port-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 591
down the admin status port up, down spanning-tree Enables Spanning Tree Protocol - on the wired profile. Default - - up - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wired-port-profile | 591 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 592
all downlink ports, regardless of forwarding mode. STP will not operate on the uplink port and is supported only on W-IAPs with three or more ports. By default Spanning Tree is disabled on wired profiles 592 | wired-port-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 593
command is modified. 4.0 Dell Networking W-Series Instant 6.2.1.0- This command is modified. 3.4 Dell Networking W-Series Instant 6.2.1.0- This command is introduced. 3.3 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wired-port-profile | 593 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 594
Command Information W-IAP Platform All platforms Command Mode Configuration mode and Wired port profile configuration submode. 594 | wired-port-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 595
bandwidth configuration per SSID will be treated as per-user downstream bandwidth contract for that SSID. 1-65535 Kbps Default - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan access-rule | 595 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 596
: Transmission Control Protocol 1-255 l udp: User Datagram Protocol Specifies the starting port number 1-65534 Default - - - - - - - - - - 596 | wlan access-rule Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 597
the outgoing interface IP address (implied NAT pool) or from the pool configured (manual NAT pool). Specifies the destination NAT IP - - address for the specified packets -risk- sites l moderate- Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan access-rule | 597 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 598
, or set a low bandwidth for suspicious websites. Configures an access rule for VLAN 1-4093 Default - - - - 598 | wlan access-rule Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 599
command is modified. 4.1 Dell Networking W-Series Instant 6.3.1.1- This command is modified. 4.0 Dell Networking W-Series Instant 6.2.1.0- This command is modified. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan access-rule | 599 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 600
Information W-IAP Platform All platforms Command Mode Configuration mode and access rule configuration sub-mode. 600 | wlan access-rule Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 601
, instead of the standard CoA port. Configures a dead time interval for the authentication server. 1-1440 minutes Default - 1813 - 5999 5 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan auth-server | 601 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 602
clients by creating a TLS tunnel between the W-IAP and the server. 1-65534 Default - - - - - 1812 2083 602 | wlan auth-server Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 603
-ip (Instant AP)(Auth Server )# drp-ip 192.0.2.11 255.255.255.255 vlan 200 gateway 192.0.2.15 Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan auth-server | 603 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 604
. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode and authentication server profile submode. 604 | wlan auth-server Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 605
you to save the customized logo - - to the internal captive portal server. decoded-texts Displays decoded texts. - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan captive-portal | 605 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 606
and conditions before using Guest Network" (Instant AP)(Captive Portal)# end (Instant AP)# commit apply 606 | wlan captive-portal Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 607
6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode and captive portal sub-mode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan captive-portal | 607 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 608
was originally requested. When a URL is configured for redirection, it overrides the Default - - - - 80 - - 608 | wlan external-captive-portal Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 609
)(External Captive Portal "AuthText1")# no auto-whitelist-disable (Instant AP)(External Captive Portal "AuthText1")# end (Instant AP)# commit apply Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan external-captive-portal | 609 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 610
W-IAP Platform All platforms Command Mode Configuration mode and external captive portal sub-mode. 610 | wlan external-captive-portal Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 611
configuration determines the duration for which the authentication server would be available if the server is marked as unavailable. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan ldap-server | 611 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 612
Guidelines Use this command to configure an LDAP server as an external authentication server. The LDAP service is based on a client-server model. The W-IAP client requests for an LDAP session commit apply 612 | wlan ldap-server Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 613
6.2.1.0- This command is introduced. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode and LDAP server sub-mode. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan ldap-server | 613 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 614
-interval radius-reauth-interval rf-band rrm-quiet-ie server-load-balancing 614 | wlan ssid-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 615
of airtime that - all clients using this SSID can use for sending and receiving data. Default - 54 Mbps 6 Mbps - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan ssid-profile | 615 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 616
all the broadcast and multicast frames to the wireless interfaces. All, ARP, Disabled Default - - - - - Disabled 616 | wlan ssid-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 617
profile. - The 802.11k protocol enables W-IAPs and clients to dynamically measure the available radio resources. Default - - - Disabled - - - 90 - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan ssid-profile | 617 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 618
cluster. Fast BSS Transition is operational only if the wireless client supports 802.11r standard. If the client does support 802.11r standard, it falls back to normal WPA2 authentication method Enabled 618 | wlan ssid-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 619
requests. When enabled, this command controls the 0-100 dB Default Disabled - - Disabled 1 Mbps 54 Mbps Disabled - 1000 - Disabled Disabled - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan ssid-profile | 619 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 620
opportunistic key caching (OKC). - okc-disable Disables opportunistic key caching (OKC). - Default Disabled - - - 64 Disabled - - - 620 | wlan ssid-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 621
802.1X supplicant) does not support this feature, a complete 802.1X authentication is required whenever it roams to a new W-IAP. OKC is supported on WPA2-AES Enterprise network only accounting interval. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan ssid-profile | 621 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 622
this, the clients are required to go through Any integer value in minutes Default userauthentication - - 622 | wlan ssid-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 623
-auth Configures a machine authentication rule. - You can assign different rights to clients based on whether their hardware device supports Default all Enabled - - - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan ssid-profile | 623 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 624
Command/Parameter Description Range machine authentication. Machine authentication is only supported on Windows devices, so this can be used to distinguish between Windows devices and . Default - - - 624 | wlan ssid-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 625
effort traffic. wmm-best-effort-share Allocates bandwidth or best effort traffic such as - Default 2000 Kbps Disabled - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan ssid-profile | 625 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 626
Description Range traffic from legacy devices or traffic from applications or devices that do not support QoS. wmm-video-dscp Allows you to specify the DSCP mapping value for -req-thresh 0 626 | wlan ssid-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 627
AP)(SSID Profile "guestNetwork")# set-role-pre-auth test1 (Instant AP)(SSID Profile "guestNetwork")# end (Instant AP)# commit apply Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan ssid-profile | 627 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 628
Information W-IAP Platform All platforms Command Mode Configuration mode and WLAN SSID profile configuration submode. 628 | wlan ssid-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 629
Configures the band for uplink - connection. The valid options are dot11a and dot11g. no... Removes the configuration - Default - - - - - - Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan sta-profile | 629 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 630
W-IAP Platform All platforms Command Mode Configuration mode and Wi-Fi uplink (sta) sub-mode. 630 | wlan sta-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 631
)(TACACS Server ) # port (Instant AP)(TACACS Server ) # key (Instant AP)(TACACS Server ) # timeout Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan tacacs-server | 631 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 632
Information W-IAP Platform All platforms Command Mode Configuration mode and TACACS server profile sub-mode. 632 | wlan tacacs-server Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 633
This command configures a walled garden to control user access to the web content and services. The walled garden access is required when an external captive portal is used. Syntax all its contents. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan walled-garden | 633 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 634
do not sign up for the Internet service can view the "allowed" websites (typically hotel property websites). The website names must be DNS-based and support the option to define wildcards. This works 634 | wlan walled-garden Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 635
they roam between wireless Internet service providers, even if the wireless hotspot uses an Internet Service Provider (ISP) with whom profile for the captive portal users. Instant supports the following smart clients: l iPass l Boingo 6.4.3.1-4.2.0.0 | CLI Reference Guide wlan wispr-profile | 635 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 636
. 3.3 Command Information W-IAP Platform All platforms Command Mode Configuration mode and WISPr profile sub-mode. 636 | wlan wispr-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 637
Networking W-Series Instant 6.2.1.0-3.3 Description This command is introduced. Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide write | 637 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 638
W-Series Instant 6.4.3.1-4.2 Dell Networking W-Series Instant 6.4.0.2-4.1 Description This command is modified. This command is introduced. 638 | xml-api-server Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 639
Command Information W-IAP Platform All platforms Command Mode Configuration mode Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide xml-api-server | 639 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 640
W-Series Instant 6.4.0.2- This command is introduced. 4.1 Command Information W-IAP Platform All platforms Command Mode Privileged EXEC mode 640 | zonename Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 641
Layer Security W-IAP Instant Access Point IDS Intrusion Detection System IEEE Institute of Electrical and Electronics Engineers ISP Internet Service Provider LEAP Lightweight Extensible Authentication Protocol MX Mail Exchanger MAC Media Access Control NAS Network Access Server NAT - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 642
Enhanced Mail PoE Power over Ethernet RADIUS Remote Authentication Dial In User Service VC Virtual Controller VSA Vendor-Specific Attributes WLAN Wireless Local Area Network transfer rate is 11 Mbps. 642 | Terminology Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 643
to the network. This database helps in preventing any two computers from being configured with the same IP address. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide Terminology | 643 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 644
(PPP), a protocol often used when connecting a computer to the Internet. EAP can support multiple authentication mechanisms, such as token cards, smart cards, certificates, one-time passwords, switch and APs 644 | Terminology Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 645
is connected. Typically if a switch is in place and does not support PoE, midspan power injectors are used. Point-to-Point Protocol over Ethernet of protocols that handle remote authentication and related services for network access control through a centralized CLI Reference Guide Terminology | 645 - Dell W-Series 228 | Instant 6.4.3.1-4.2 CLI Guide - Page 646
points) using a wireless connection such as Wi-Fi. This type of ISP offers broadband service and allows subscriber computers, called stations, to access the Internet and the web from anywhere connection. 646 | Terminology Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
Reference Guide
Dell Networking W-Series
Instant
6.4.3.1-4.2.0.0
Command-Line Interface