Dell PowerStore 7000X EMC PowerStore Hardware Information Guide
Dell PowerStore 7000X Manual
View all Dell PowerStore 7000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerStore 7000X manual content summary:
- Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 1
Dell EMC PowerStore Hardware Information Guide 1.x August 2020 Rev. A01 - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 2
of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 3
tags...8 Base enclosure rear view...9 Base enclosure embedded modules and 4-port cards 9 Base enclosure I/O module types...12 Port labels in PowerStore Manager...13 Base enclosure power supply...13 Node internal components...13 Chapter 3: Expansion enclosure component descriptions 15 2U, 25-drive - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 4
to the PowerStore Documentation page at www.dell.com/ powerstoredocs. ● Troubleshooting For information about products, software updates, licensing, and service, go to www.dell.com/support and locate the appropriate product support page. ● Technical support For technical support and service requests - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 5
requirements of multiple different storage applications with support for high availability. The design includes two major configurations: ● PowerStore T model appliances ● PowerStore X model appliances PowerStore T model appliances serve Block and File services, and the software stack is deployed - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 6
and plastic assemblies that provide smooth, reliable contact with the enclosure slot guides and mid-plane connectors. Each carrier has a handle with a latch and fault LEDs are on the front of the enclosure. There are three supported drive types: ● NVMe NVRAM ● NVMe SSD ● NVMe SCM You can visually - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 7
Node Each base enclosure contains two nodes. The node is the intelligent component providing the compute capability of the base enclosure. Node power supply module Each node contains a power supply module that connects the system to an exterior power source. If one power supply fails, redundant - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 8
for the 25-slot base enclosure is a black pull-out tag that is located between the drives in slots 16 and 17. Figure 3. Service Tag location World Wide Name Seed Tag The World Wide Name (WWN) Seed Tag is a blue pull-out tag that is located between the drives - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 9
Figure 4. WWN Seed Tag location Base enclosure rear view The rear of the base enclosure contains two nodes: node A and node B. Each node contains the following hardware components: ● One embedded module ● Two optional I/O modules ● One power supply module Figure 5. Base enclosure rear view with - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 10
(service) 5 RJ-45 LAN connector - service port 6 RJ 45 LAN connector - system management port. Only used on PowerStore T model. Not used on PowerStore X port 10GBaseT embedded module. The 4-port 25GbE SFP based embedded module supports 1GbE SFP to RJ45, 10GbE or 25GbE SFP28, 25GbE passive TwinAx - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 11
and iSCSI block protocol. Speeds of 1GbE and 10 GbE are supported. Embedded module and 4-port card LED status Figure 7. Embedded . System not initialized. A management IP address has not been assigned. Node in Service Mode. No fault has occurred, normal operation. Node is on (main power). Node - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 12
SFP+ connection to a host or switch port. 4-port BaseT I/O module The 4-port BaseT I/O module can interface at speeds of 1 Gb/s and 10 Gb/s and supports both Ethernet network traffic and iSCSI (Block) on the same node. Ports can be configured as both IP and iSCSI simultaneously. The I/O module comes - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 13
Port labels in PowerStore Manager In PowerStore Manager, on the Hardware > Rear View tab for an appliance, Internal battery backup module ● Fan module Dual inline memory modules Twenty-four, 288-pin DIMM sockets support up to 24 DDR4 DIMMs capable of up to 1,280 GB of memory. Internal battery backup - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 14
Fan module Seven redundant fan modules connect to the motherboard within the node. These fans provide continuous airflow through the front drives and through the rear of the node to keep the components at optimal operating temperatures. NOTE: If two cooling modules fault within the same node, the - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 15
3 Expansion enclosure component descriptions Topics: • 2U, 25-drive expansion enclosure 2U, 25-drive expansion enclosure The 2U, 25-drive expansion enclosure includes slots for 25 2.5-inch drives. It uses a 12-Gb/s SAS interface for communication between the nodes and the expansion enclosure. 2U, 25 - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 16
component locations 2U, 25-drive expansion enclosure link control card Link control card functions and features The link control card (LCC) supports, controls, and monitors the expansion enclosure, and is the primary interconnect management element. Each LCC includes connectors for input and output - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 17
. Each power supply is an auto-ranging, power-factor-corrected, multi-output, offline converter with its own line cord. Each power supply supports a fully configured expansion enclosure and shares load currents with the other supply. The drives and Expansion enclosure component descriptions 17 - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 18
LED (input) 2 Green On AC power on - Off AC power off, verify source power DC power LED (output) 3 Green On DC power on (not supported) - Off DC power off, verify source power Power supply and cooling module fault LED 4 Amber On Fault Blinking During power shutdown and during - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 19
4 Technical specifications Topics: • Physical specifications • Dimensions and weight • Power requirements • Operating limits • Shipping and storage requirements Physical specifications Table 14. Physical specifications Per Appliance 1000 CPU 4 x Intel CPUs, 32 cores, 1.8 GHz Memory 384 GB - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 20
consumption values for your specific environment, go to https:// powercalculator.emc.com/. Table 17. Power requirements Requirement 1000T/ 1000X 3000T/3000X 5000T 5000X 7000T/7000X Maximum input power 240 VAC ± 10%, single phase For 100-120V, a customer-supplied step-up transformer is required - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 21
Table 18. High ambient temperature shutdown (continued) Ambient temperature Hardware fault Any Three hottest drives have average temperature of 50° C (122° F) Any Two fans fault Consequence to less than 45° C (113° F) , the system powers on.. System shuts down after five minute timer expires - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 22
Table 21. Base enclosure airflow Max Airflow CFM Min Airflow CFM 165 CFM 50 CFM Max Power Usage (Watts) 850 W Environmental recovery If the system exceeds the maximum ambient temperature by approximately 10°C (18°F), the nodes in the system begin an orderly shutdown that saves cached data, and - Dell PowerStore 7000X | EMC PowerStore Hardware Information Guide - Page 23
Shock and vibration Products have been tested to withstand the shock and random vibration levels. The levels apply to all three axes and should be measured with an accelerometer on the equipment enclosures within the cabinet and shall not exceed: Platform condition Non operational shock
Dell EMC PowerStore
Hardware Information Guide
1.x
August 2020
Rev. A01