Dell PowerStore 500T EMC PowerStore Hardware Information Guide for Model
Dell PowerStore 500T Manual
View all Dell PowerStore 500T manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerStore 500T manual content summary:
- Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 1
Dell EMC PowerStore Hardware Information Guide for PowerStore 500T Model Version 2.x June 2021 Rev. A00 - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 2
and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 - 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 3
...13 Node internal components...13 Chapter 3: Technical specifications 14 Physical specifications for PowerStore 500T...14 Dimensions and weight for PowerStore 500T...14 Power requirements for PowerStore 500T...15 Operating limits...15 Shipping and storage requirements...16 Base enclosure airflow - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 4
PowerStore Documentation page at https:// www.dell.com/powerstoredocs. ● Troubleshooting For information about products, software updates, licensing, and service, go to https://www.dell.com/support and locate the appropriate product support page. ● Technical support For technical support and service - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 5
1 Platform overview Topics: • Description Description PowerStore 500T appliances serve Block and File services, and the software stack is deployed directly on the system. The PowerStore 500T hardware consists of a 2U, two node storage solution. The enclosure as a whole is called a base enclosure. - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 6
and plastic assemblies that provide smooth, reliable contact with the enclosure slot guides and mid-plane connectors. Each carrier has a handle with a latch activity and fault LEDs are on the front of the enclosure. There are two supported drive types: ● NVMe SSD ● NVMe SCM You can mix NVMe SSD and - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 7
EMI shielding EMI compliance requires a properly installed electromagnetic interference (EMI) shield in front of the base enclosure drives. When installed in cabinets that include a front door, the base enclosure includes a simple EMI shield. Other installations require a front bezel that has a - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 8
-slot base enclosure is a black pull-out tag that is located between the drives in slots 16 and 17. The Service Tag includes the Part Number, Dell Service Tag, and System Serial Number. Figure 3. Service Tag location World Wide Name Seed Tag The World Wide Name (WWN) Seed Tag is a blue pull-out tag - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 9
same slots. The embedded module contains the following components: ● One 4-port card ● Two fixed 10GbE optical ports ● Two RJ-45 LAN connectors ○ System management port ( ) ○ Service port ( ) ● Two mini-SAS HD back-end ports (unused) ● One USB port Base enclosure component descriptions 9 - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 10
RJ-45 LAN connector - service port USB port Mini-SAS HD back-end ports (unused) Non-maskable interrupt (NMI) button About the 4-port card The 4-port card is an optional 25GbE SFP based component located within the embedded module. The 4-port 25GbE SFP based embedded module supports 1GbE SFP to RJ45 - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 11
is off. Fault has occurred. Node in Degraded Mode. System is booting. System not initialized. A management IP address has not been assigned. Node in Service Mode. No fault has occurred, normal operation. Link up with high speed Link up with degraded speed Link down Port activity. No port activity - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 12
module is an Ethernet I/O module that is used to serve Ethernet network traffic and iSCSI block protocol to hosts for the platform. The I/O module supports 1GbE SFP to RJ-45, 10GbE SFP, 10GbE active and passive TwinAx, 25GbE SFP28, and 25GbE passive TwinAx. 4-port BaseT I/O module The 4-port BaseT - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 13
supply Figure 9. Base enclosure power supply LEDs Table 7. Base enclosure power supply LEDs LED Location Fault DC power (output) - Not currently supported AC power (input) State Solid amber Off Green Off Green Off Description Power supply or backup fault. Check cable connection. No fault - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 14
● CPU: 2 x Intel CPUs, 24 cores, 2.2 GHz (One CPU in each node) ● Memory: 192 GB Dimensions and weight for PowerStore 500T Base enclosure Table 8. 2U, 25-drive base enclosure dimensions and weight Dimension Value Weight (fully populated) 37.4 kg (82.4 lbs) Vertical size 2 NEMA units Height - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 15
case data. To estimate power consumption values for your specific environment, go to https:// powercalculator.emc.com/. Table 9. Power requirements Requirement PowerStore 500T Maximum input power 100 to 240 VAC ± 10%, single phase AC line current (operating maximum) 10.6 A max at 100 VAC - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 16
Table 11. Operating limits (continued) Description Limit Improbable: Lower temp 1°C per 175 M above 950 M Shipping and storage requirements CAUTION: Systems and components must not experience changes in temperature and humidity that are likely to cause condensation to form on or in that system - Dell PowerStore 500T | EMC PowerStore Hardware Information Guide for Model - Page 17
The data center should maintain a cleanliness level as identified in ISO 14664-1, class 8 for particulate dust and pollution control. The air entering the data center should be filtered with a MERV 11 filter or better. The air within the data center should be continuously filtered with a MERV 8 or
Dell EMC PowerStore
Hardware Information Guide for PowerStore 500T
Model
Version 2.x
June 2021
Rev. A00