Dell Latitude 5300 2-in-1 Service Manual

Dell Latitude 5300 2-in-1 Manual

Get Dell Latitude 5300 2-in-1 PDF manuals and user guides View all Dell Latitude 5300 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Dell Latitude 5300 2-in-1 manual content summary:

  • Dell Latitude 5300 2-in-1 | Service Manual - Page 1
    Dell Latitude 5300 2-in-1 Service Manual Regulatory Model: P96G Regulatory Type: P96G001
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 2
    of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 3
    on your computer...5 Safety instructions...5 Before working inside your computer...5 Safety precautions...6 Electrostatic discharge-ESD protection...6 ESD field service kit ...7 Transporting sensitive components...7 After working inside your computer...8 2 Technology and components...9 USB features
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 4
    Installing the heatsink - UMA...49 DC-in port...49 Removing the DC-in port...49 Installing the DC-in port...51 LED board...53 Removing the LED board...53 assembly...92 Replacing the palmrest and keyboard assembly...92 5 Troubleshooting...94 Enhanced Pre-Boot System Assessment (ePSA) diagnostics 94
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 5
    only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 6
    rubber soles to reduce the chance of getting electrocuted. Standby power Dell products with standby power must be unplugged before you open the case. Systems that incorporate standby power are essentially powered while turned off. The internal power enables the system to be remotely turned on (wake
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 7
    casings, away from internal parts that are insulators and often highly charged. • Working Environment - Before deploying the ESD Field Service or parts to be returned to Dell, it is critical to place 2. Tighten stomach muscles. Abdominal muscles support your spine when you lift, offsetting the force
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 8
    of your body to the load. Avoid twisting your body and back. 6. Follow the same techniques in reverse to set the load down. After working inside your computer About this task After you complete any replacement procedure, ensure that you connect any external devices, cards, and cables before turning
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 9
    between host computers and peripheral devices like mice, keyboards, external drivers, and printers. Table 1. USB evolution Type Data Transfer power and increased device current draw to better accommodate power-hungry devices • New power management features • Full-duplex data transfers and support
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 10
    available, USB video solutions should work that much better. Single-link 3.0/USB 3.1 Gen 1 Hard Drives • USB 3.0/USB 3.1 Gen 1 Drive Docks & Adapters • USB 3.0/USB 3.1 Gen 1 Flash Drives & Readers • support various exciting new USB standards like USB 3.1 and USB power delivery (USB PD).
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 11
    You could plug your laptop into an external display connected to a power cable, and that external display would charge your laptop as you used it to any dock, display or data device like an external hard drive. Thunderbolt 3 uses a USB Type-C connector/port to connect to supported peripherals. 1.
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 12
    3. DisplayPort 1.4 - compatible with existing DisplayPort monitors, devices and cables 4. USB Power Delivery - Up to 130W on supported computers Key Features of Thunderbolt 3 over USB Type-C 1. Thunderbolt, USB, DisplayPort and power on USB Type-C on a single cable (features vary between different
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 13
    • HDMI supports communication between the video source (such as a DVD player) and the DTV, enabling new functionality. Power button LED behavior On certain Dell Latitude systems, the power button LED is used to provide an indication of the system status, and as a result the power button illuminates
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 14
    provide indication of the system status • Power Adapter LED: • The LED on Power adapter connector illuminates white when power is supplied from electrical outlet. • 2. LED on either side of RJ45 port Link speed indicator (LHS) Activity indicator (RHS) Green Amber 14 Technology and components
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 15
    3 Major components of your system 1. Base cover 2. DC-in port Major components of your system 15
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 16
    assembly 12. LED board 13. Touchpad button board 14. Coin cell battery 15. WLAN card 16. WWAN card 17. System fan NOTE: Dell provides a list of components and their part numbers for the original system configuration purchased. These parts are available according to warranty coverages purchased by
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 17
    4 Disassembly and reassembly MicroSD card Removing the microSD card Prerequisites 1. Follow the procedure in Before working inside your computer. Steps 1. Push the microSD card to release it from the computer [1]. 2. Slide the microSD card out of the computer [2]. Installing the microSD
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 18
    inside your computer. SIM card tray Removing the SIM card tray Prerequisites 1. Follow the procedure in Before working inside your computer. Steps 1. Insert a pin into the hole of the SIM card tray and push inward until the tray is released [1, 2]. 2. Slide the SIM
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 19
    Installing the SIM card tray Steps 1. Place the SIM card into the SIM card tray with the metallic contact facing up [1]. 2. Align the SIM card tray with the slot on the computer and carefully slide it in [2]. 3. Slide the SIM card tray into the slot, until it clicks into place [3]. Disassembly and
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 20
    4. Follow the procedures in After working inside your computer. Base cover Removing the base cover Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the microSD card. Steps 1. Loosen the eight captive screws [1]. 20 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 21
    2. Using a plastic scribe [1], pry the base cover from the top-left corner and continue to work on the sides to open the base cover [2]. Disassembly and reassembly 21
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 22
    3. Lift and remove the base cover away from the computer. Installing the base cover Steps 1. Align and place the base cover on the computer. 22 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 23
    2. Press the edges and sides of the base cover until it snaps into place. Disassembly and reassembly 23
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 24
    3. Tighten the eight captive screws to secure the base cover to the computer. 24 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 25
    any screws during the servicing of this product are not Dell technical support for assistance. See www.dell.com/contactdell. • Always purchase genuine batteries from www.dell.com or authorized Dell partners and resellers. Removing the battery Prerequisites 1. Follow the procedure in before working
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 26
    3. Loosen the two captive screws that secure the battery to the palmrest [1]. 4. Slide the battery inward and lift the battery away from the palmrest [2]. 26 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 27
    Installing the battery Steps 1. Align and slide the battery on the palmrest [1]. 2. Tighten the two captive screws to secure the battery to the palmrest [2]. Disassembly and reassembly 27
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 28
    3. Connect the battery cable to the connector on the system board [1]. 4. Affix the adhesive tape to secure the battery cable connector [2]. 28 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 29
    1. Replace the base cover. 2. Replace the microSD card. 3. Follow the procedure in after working inside your computer WWAN card Removing the WWAN card Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 30
    Installing the WWAN card About this task CAUTION: To avoid damage to the WWAN card, do not place any cables under it. Steps 1. Insert the WWAN card into the connector on the system board [1]. 2. Connect the WWAN antenna cables to the connectors on the WWAN card [2]. 3. Place the WWAN card bracket to
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 31
    . 2. Replace the base cover. 3. Replace the microSD card. 4. Follow the procedure in after working inside your computer. WLAN card Removing the WLAN card Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 32
    Installing the WLAN card About this task CAUTION: To avoid damage to the WLAN card, do not place any cables under it. Steps 1. Insert the WLAN card into the connector on the system board [1]. 2. Connect the WLAN antenna cables to the connectors on the WLAN card [2]. 3. Place the WLAN card bracket to
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 33
    inside your computer. Memory modules Removing the memory module Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the battery. Steps 1. Pry the retention clips securing the memory module until the
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 34
    Installing the memory module Steps 1. Align the notch on the memory module with the tab on the memory-module slot. 2. Slide the memory module firmly into the slot at an angle [1]. 3. Press the memory module down until the clips secure it [2]. NOTE: If you do not hear the click, remove the memory
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 35
    the M.2 SSD Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the battery. Steps 1. Remove the two (M2x3) screws that secure the M.2 SSD support bracket to the palmrest [1]. 2. Slightly turn and remove
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 36
    3. Remove the single (M2x2) screw that secures the M.2 SSD to the palmrest [1]. 4. Lift the M.2 SSD away from the computer [2]. 36 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 37
    Installing the M.2 SSD Steps 1. Place the M.2 SSD into the slot on the palmrest [1]. 2. Replace the single (M2x2) screw to secure the M.2 SSD to the palmrest [2]. Disassembly and reassembly 37
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 38
    3. Align and place the SSD support bracket above the M.2 SSD [1]. 4. Replace the two (M2x3) screws to secure the SSD support bracket to the palmrest [2]. 38 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 39
    . 2. Replace the base cover. 3. Replace the microSD card. 4. Follow the procedure in after working inside your computer. Speakers Removing the speakers Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 40
    3. Disconnect the touchpad cable from the connector on the daughter board. 4. Peel the adhesive tapes and unroute the speaker cable. 40 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 41
    5. Lift and remove the speakers away from the palmrest. Disassembly and reassembly 41
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 42
    Installing the speakers Steps 1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palmrest. 2. Route the speaker cable through the routing guides. 42 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 43
    3. Affix the adhesive tape to secure speaker cable to the palmrest [1]. 4. Connect the speaker cable to the connector on the system board [2]. Disassembly and reassembly 43
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 44
    2. Replace the base cover. 3. Replace the microSD card. 4. Follow the procedure in after working inside your computer. System fan Removing the system fan Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 45
    2. Remove the two (M2x5) screws that secure the system fan to the palmrest [1]. 3. Lift the system fan away from the computer [2]. Disassembly and reassembly 45
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 46
    Installing the system fan Steps 1. Place and align the screw holes on the system fan with the screw holes on to the palmrest [1]. 2. Replace the two (M2x5) screws to secure the system fan to the palmrest [2]. 46 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 47
    3. Connect the system fan cable to the connector on the system board. Disassembly and reassembly 47
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 48
    Replace the base cover. 3. Replace the microSD card. 4. Follow the procedure in after working inside your computer. Heat sink Removing the heatsink - UMA Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 49
    2. Replace the base cover. 3. Replace the microSD card. 4. Follow the procedure in after working inside your computer. DC-in port Removing the DC-in port Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 50
    the two (M2x4) screws that secure the Type-C bracket to the system board [1]. 2. Lift the Type-C bracket away from the computer [2]. 3. Disconnect the DC-in port cable from the connector on the system board and remove the DC-in port from the computer [1, 2]. 50 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 51
    Installing the DC-in port Steps 1. Place the DC-in port to its slot on the computer [1]. 2. Connect the DC-in port cable to the connector on the system board [2]. Disassembly and reassembly 51
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 52
    3. Place the Type-C bracket on its slot on the computer [1]. 4. Replace the two (M2x4) screws to secure the Type-C bracket to the palmrest [2]. 52 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 53
    . 2. Replace the base cover. 3. Replace the microSD card. 4. Follow the procedure in after working inside your computer. LED board Removing the LED board Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 54
    3. Peel the adhesive tape that secures the LED board cable connector to the LED board [1]. 4. Peel the grey adhesive tape that secures the LED board [2]. 54 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 55
    5. Remove the single (M2x2.5) screw that secures LED board to the palmrest [1]. 6. Lift the LED board away from the computer [2]. Disassembly and reassembly 55
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 56
    Installing the LED board Steps 1. Place the LED board and align the screw hole on the LED board with the screw hole on the palmrest [1]. 2. Replace the single (M2x2.5) screw to secure the LED board to the palmrest [2]. 56 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 57
    3. Affix the grey adhesive tape to secure the LED board [1]. 4. Affix the adhesive tape to secure the LED board [2]. Disassembly and reassembly 57
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 58
    5. Connect the LED board cable to the connector on the system board and route the LED board cable [1, 2]. 58 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 59
    inside your computer. Touchpad button board Removing the touchpad button board Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the battery. 5. Remove the speaker. 6. Remove the LED board. NOTE: Removal
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 60
    Installing the touchpad button board Steps 1. Place the touchpad button board into the slot on the palmrest [1]. 2. Replace the two (M2x3) screws to secure the touchpad button board to the palmrest [2]. 60 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 61
    3. Connect the touchpad button board cable to the connector on the touchpad board. Disassembly and reassembly 61
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 62
    Replace the base cover. 5. Replace the microSD card. 6. Follow the procedure in after working inside your computer. System board Removing the system board Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 63
    3. Disconnect the following cables: a) USH cable [1]. b) LED board cable [2]. c) touchpad cable [3]. Disassembly and reassembly 63
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 64
    4. Remove the single (M2.5x4) screw that secures the fingerprint support bracket to the system board [1]. 5. Lift the fingerprint support bracket away from the computer [2]. 6. Disconnect the fingerprint port [3]. 64 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 65
    7. Peel the adhesive tape and disconnect the cable from the connector on the system board [1]. 8. Peel the adhesive tape that secures the eDP bracket [2]. 9. Remove the single (M2x4) screw that secures the eDP bracket to the system board [3]. 10. Remove the eDP bracket away from the computer [4]. 11
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 66
    12. Disconnect the sensor board cable from the connector on the system board [1]. 13. Release the coin cell battery from the palmrest [2]. 66 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 67
    14. Remove the single (M2.5x4) screw that secures the system board to the palmrest [1]. 15. Lift the system board away from the computer [2]. Disassembly and reassembly 67
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 68
    Installing the system board Steps 1. Align and place the system board to the palmrest [1]. 2. Replace the single (M2.5x4) screw to secure the system board to the palmrest [2]. 68 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 69
    3. Connect the sensor cable to th econnector on th esystem board [1]. 4. Place the coin cell battery into its slot on the plamrest [2]. Disassembly and reassembly 69
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 70
    on the system board and adhere the adhesive tape [1]. 6. Connect the eDP cable to the connector on the system board [2]. 7. Place the eDP support bracket above the eDP connector [3]. 8. Replace the single (M2x4) screw to secure the eDP bracket to the system board [4]. 9. Adhere the adhesive tape
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 71
    10. Connect the fingerprint cable to the connector on the system board [1]. 11. Place the fingerprint support bracket [2]. 12. Replace the single (M2.5x4) screw to secure the fingerprint support bracket to the system board [3]. Disassembly and reassembly 71
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 72
    13. Connect the following cables: a) USH cable [1]. b) LED board cable [2]. c) touchpad cable [3]. 72 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 73
    14. Align and place the memory module frame in its slot on the system board [1]. 15. Replace the three (M2x3) screws to secure the memory module frame to the system board [2]. Disassembly and reassembly 73
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 74
    fan. 6. Replace the heatsink. 7. Replace the speaker. 8. Replace the battery. 9. Replace the base cover. 10. Replace the microSD card. 11. Follow the procedure in after working inside your computer. 74 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 75
    Coin-cell battery Removing the coin-cell battery Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the battery. 5. Remove the speaker. 6. Remove the heatsink. 7. Remove the memory module. 8. Remove
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 76
    base cover. 11. Replace the microSD card. 12. Follow the procedure in after working inside your computer. Display assembly Removing the display assembly Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 77
    Steps 1. Peel the adhesive tape and disconnect the cable from the connector on the system board [1]. 2. Remove the single (M2x4) screw that secures the eDP cable bracket to the system board [2]. 3. Lift the eDP cable bracket from the system board [3]. 4. Disconnect and unroute the eDP cable [4]. 5.
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 78
    6. Remove the four (M2.5x4) screws that secure the display assembly to the system chassis [1]. 7. Remove the display assembly from the system [2]. 78 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 79
    Installing the display assembly About this task NOTE: Ensure that the hinges are opened to the maximum before replacing the display assembly on the palmrest and keyboard assembly. Steps 1. Align and place the system chassis under the hinges of the display assembly [1]. 2. Replace the four (M2.5x4)
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 80
    3. Seat the system chassis on the display assembly. 80 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 81
    4. Connect the cable to the connector on the system board and adhere the adhesive tape [1]. 5. Reroute the eDP cable and connect it to the eDP connector [2]. 6. Place the eDP cable bracket on the system board [3]. 7. Replace the single (M2x4) screw that secures the eDP cable bracket to the system
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 82
    . 2. Replace the base cover. 3. Replace the microSD card. 4. Follow the procedure in after working inside your computer. Keyboard Removing the keyboard Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 83
    10. Remove the WWAN card. 11. Remove the system board. NOTE: System board can be removed with heatsink attached. 12. Remove the coin cell battery. Steps 1. Peel the adhesive tape securing the keyboard and the smartcard reader. 2. Lift the latch and disconnect the backlit cable and the keyboard
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 84
    3. Remove the 19 (M2x2) screws that secure the keyboard to the palmrest [1]. 4. Remove the keyboard away from the computer [2]. 84 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 85
    Installing the keyboard Steps 1. Align and place the keyboard on the palmrest [1]. 2. Replace the 19 (M2x2) screws to secure the keyboard to the palmrest [2]. Disassembly and reassembly 85
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 86
    3. Connect the backlit cable and the keyboard cable to the connectors on the touchpad. 86 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 87
    4. Adhere the adhesive tape securing the keyboard and the smartcard board. Disassembly and reassembly 87
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 88
    inside your computer. Smart card reader board Removing the smart card reader board Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the base cover. 4. Remove the battery. 5. Remove the speaker. 6. Remove the memory module. 7. Remove
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 89
    2. Remove the two (M2x2.5) screws that secure the smart card reader to the palmrest [1]. 3. Lift the smart card reader board away from the computer [2]. Disassembly and reassembly 89
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 90
    Installing the smart card reader board Steps 1. Align and place the smart card reader board on the palmrest [1]. 2. Replace the two (M2x2.5) screws to secure the smart card reader board to the palmrest [2]. 90 Disassembly and reassembly
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 91
    3. Reroute the smart card reader cable. Disassembly and reassembly 91
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 92
    the system fan. 8. Replace the speaker. 9. Replace the battery. 10. Replace the base cover. 11. Replace the microSD card. 12. Follow the procedure in after working inside your computer. Palmrest assembly Replacing the palmrest and keyboard assembly Prerequisites 1. Follow the procedure in before
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 93
    system fan. 9. Replace the speaker. 10. Replace the battery. 11. Replace the base cover. 12. Replace the microSD card. 13. Follow the procedure in after working inside your computer. Disassembly and reassembly 93
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 94
    any issues, error codes are displayed. Note the error code and validation number and contact Dell. System diagnostic lights Battery-status light Indicates the power and battery-charge status. Solid white - Power adapter is connected and the battery has more than 5 percent charge. Amber - Computer is
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 95
    to access the internet due to WiFi connectivity issues a WiFi power cycle procedure may be performed. The following procedure provides the instructions on how to conduct a WiFi power cycle: NOTE: Some ISPs (Internet Service Providers) provide a modem/router combo device. Steps 1. Turn off your
  • Dell Latitude 5300 2-in-1 | Service Manual - Page 96
    . Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Steps 1. Go to Dell.com/support. 2. Select your support category. 3. Verify your country or region in the Choose a Country
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Dell Latitude 5300 2-in-1
Service Manual
Regulatory Model: P96G
Regulatory Type: P96G001