Dell EqualLogic PS4210 Storage Arrays - Installation and Setup Guide
Dell EqualLogic PS4210 Manual
View all Dell EqualLogic PS4210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell EqualLogic PS4210 manual content summary:
- Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 1
Dell EqualLogic PS4210 Storage Arrays Installation and Setup Guide - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 2
- Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 3
Dell EqualLogic PS4210 Storage Arrays Installation and Setup Guide Version 1.0 Regulatory Model Series E03J and E04J - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 4
Inc. All rights reserved. Dell™ and EqualLogic® are trademarks of Dell Inc. All trademarks and registered trademarks mentioned herein are the property this material in any manner whatsoever without the written permission of Dell is strictly forbidden. Published: October 2014 Part Number: M40C6-A00 - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 5
Array to the Network 12 Set Up a Serial Connection to the Array 13 4 Software Configuration 17 Choose a Configuration Method 17 Collect Configuration Information 17 Start the Software Configuration 18 Set the Member RAID Policy 21 5 Storage Allocation 23 Create a Volume 23 Connect - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 6
Installation and Setup Guide Table of Contents iv - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 7
, volumes, array software, and host software: 1. Log in to the Dell EqualLogic support site (eqlsupport.dell.com). 2. Select Downloads. 3. From the drop-down list, choose PS Series Firmware. 4. Under Recommended PS Series Firmware, select the required version. The link to the download page appears - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 8
Installation and Setup Guide Preface Contacting Dell Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services might not be available in your area. To contact Dell EqualLogic Technical Support by phone, if you are - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 9
on page 11 and Connect the Array to the Network on page 12. 3. Configure the PS Series software. First, initialize an array to make it accessible on the expand a group, capacity and performance increase automatically. See Choose a Configuration Method on page 17. 4. Start using the iSCSI SAN array. - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 10
PS4210 Hardware Owner's Manual 1 Understanding the Array Installation Procedure 2 - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 11
and network cables, as described in Chapter 3. Before You Begin Before installing the array: • Register for a Dell™ EqualLogic® Customer Support Account. If you do not have a customer service support account, go to eqlsupport.dell.com and create one. • Download and read the Release Notes from the - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 12
PS4210 Installation Guide 2 Rack Mounting the Array • For the ReadyRails™ II rail • Mount the array in a horizontal orientation or you will void your array warranty and support contract. Environmental Requirements The rack location must meet the following environmental requirements: • The power - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 13
PS4210 Installation Guide 2 array support provider or reseller. Creates a serial connection between an array and a console or terminal emulator. Use the cable to run the setup utility included in the shipping box: • Setup poster • Installation and Setup Guide (this document) • License, regulatory - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 14
PS4210 Installation Guide 2 Rack Mounting the Array Optional Hardware You can optionally use an and Array in a Rack Install the rails in the rack following the safety instructions and the rack installation instructions provided with your rail kit. If installed in a closed or multi-unit rack - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 15
PS4210 Installation Guide 2 Rack Mounting the Array Figure 2: Installing the Array Into the Rack Figure 3 shows the front view of line up with the threaded holes on the front of the mounting rails, and manually secure the captive fasteners to the rails. Note: Do not overtighten the thumbscrews. 7 - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 16
PS4210 Installation Guide 2 Rack Mounting the Array Installing the Bezel The steps for installing the bezel are the same for all array models: 1. Hook the right end of - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 17
about network requirements, see the Dell EqualLogic Configuration Guide on the Dell TechCenter website at en.community.dell.com/techcenter/storage/w/wiki/2639.equallogic-configuration-guide.aspx. General network configuration is beyond the scope of this manual. Recommendation Switched 10GbE network - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 18
PS4210 Installation Guide 3 Connecting the Array Cables Recommendation Description Management Connect Dell EqualLogic Group Manager Administrator's Manual, and the Dell EqualLogic Group Manager CLI Reference Guide for more information about DCB. Minimum and Recommended Cable Configurations For - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 19
PS4210 Installation Guide 3 Connecting the Array Cables Figure 6: Recommended Network Configurations Connect and Secure the Power Cables Obtain the power cables that were shipped with the array. If the array was not shipped with power cables, contact your PS Series support provider or reseller - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 20
PS4210 Installation Guide 3 Connecting the Array Cables - Plug the power cables into a grounded electrical traffic. Use the management port only if you configure a management network. See the Dell EqualLogic Group Manager Administrator's Manual for more information. Obtain the appropriate number - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 21
PS4210 Installation Guide 3 Connecting the Array Cables 1. Find the power switch, located either a problem. Input Power. This LED is lit (green) as long as main power is connected to the power supply. Set Up a Serial Connection to the Array If you plan to use the setup utility to configure the - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 22
PS4210 Installation Guide 3 Connecting the Array Cables See Figure 9 (not to scale). The serial connection must have the following characteristics: • 9600 baud • One STOP bit • No parity • 8 data - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 23
PS4210 Installation Guide 3 Connecting the Array Cables Serial Cable Pinout Information Figure 10 shows the pin locations on the DB9 connectors on the serial cable shipped with the - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 24
PS4210 Installation Guide 3 Connecting the Array Cables 16 - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 25
for configuring the software. Choose one method: • Use the Remote Setup wizard, either for Windows or Linux. For instructions about using the Remote Setup wizard, see the Dell EqualLogic Host Integration Tools for Microsoft Installation and User's Guide or the Dell EqualLogic Host Integration - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 26
-sensitive. Microsoft services running on a computer must be allowed access to the group in order to create VSS snapshots in the group or use VDS. Applicable only when creating a group with the Remote Setup wizard. Start the Software Configuration Use the setup utility or the Remote Setup wizard to - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 27
PS4210 Installation Guide 4 Software Configuration After you complete the software configuration, the array becomes a member of a group and its disk storage is available for use. Using the Setup Utility to Configure the Software To use the setup utility to initialize an array and create or expand - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 28
PS4210 Installation Guide 4 Software Configuration Searching to see if the group exists support website. 3. Install the Remote Setup wizard following the instructions in the Host Integration Tools documentation. 4. Start the Remote Setup wizard by clicking: Start, Programs, EqualLogic, Remote Setup - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 29
PS4210 Installation Guide 4 Software Configuration Set the Member RAID Policy The storage space in a new group member (array) is not available until you configure a RAID policy on the member. A RAID policy consists of a RAID level and a spare disk configuration the setup utility support for - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 30
PS4210 Installation Guide 4 Software Configuration 3. Click Yes in the warning dialog box to open the Configure Member - General Settings dialog box. 4. Select the pool and click Next. If prompted, confirm you want to assign the member to the pool. 5. Select the RAID policy on the Configure Member - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 31
, you can set aside space for volume snapshots or configure a volume with thin provisioning. However, thin provisioning is not appropriate for all storage environments. See the Dell EqualLogic Group Manager Administrator's Guide for information about advanced volume functionality. Using the CLI - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 32
PS4210 Installation Guide 5 Storage Allocation • ipaddress ip_address You can create a maximum of Create Volume wizard described in the next section. Create Volume Wizard The Create Volume wizard guides you through the process of defining a new volume and setting the various options including name - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 33
PS4210 Installation Guide 5 Storage Allocation Field Create volume in folder Storage pool assignment Description If the group has volume folders, check this checkbox and select a folder from the - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 34
PS4210 Installation Guide 5 Storage Allocation Field Description Shortcut Key Estimated This table estimates how the currently proposed volume size changes in and snapshot settings affect the existing space in the storage pool designated storage pool. default None Step 3: Configure iSCSI - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 35
PS4210 Installation Guide 5 Storage Allocation Field that uses 4KB sectors, first verify that your operating system supports 4KB sectors. Refer to the 4KB: Alt+4 documentation for your operating system -05.com.equallogic.5-4a0900-2f00000-007eca92d654f160-dbvol To connect a computer to a volume: 27 - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 36
Guide 5 Storage Allocation 1. Install and configure an iSCSI initiator on the computer. Hardware and software initiators are available from different vendors. Configure your initiator using the instructions provided by the vendor. Note: Dell recommends that you visit the Technical Support - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 37
Hardware Owner's Manual provides basic storage array information, maintenance information, and troubleshooting information for your PS Series storage array hardware. • The Dell EqualLogic Group Manager Administrator's Guide provides details about configuring and using the PS Series firmware that is - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 38
PS4210 Installation Guide 6 Where to Go After Setting Up a Group Task Description such as firmware upgrades. Accounts can be configured to volumes. Both initiator and target CHAP authentication are supported. Modify the date, time, or time zone or configure NTP Group time is based on the clock - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 39
. • The Hardware Owner's Manual provides information about system features and describes how to troubleshoot the system and install or replace of the official Mexican standards (NOM): AC Power Supply NOM Information for Mexico Dell México S.A. de C.V. Importer Paseo de la Reforma 2620 - 11° Piso - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 40
PS4210 Installation Guide 7 Other Information You Might Need Power Supplies Under typical ) PS4210 X, XV (2.5-inch drives) 54.1 cm (21.3 inches) PS4210X, XV (2.5-inch drives), S, XS: 24.1 kg (53 lb) PS4210E (3.5-inch drives): 44.45 kg (98 lb) Available Hard Drive Power (Per Slot) Supported hard - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 41
PS4210 Installation Guide 7 Other Information You Might Need Environmental level Acoustics • Active mode: 7.4 bels, A-Weighted sound power level, LwA-UL as measured per ISO 7779 and declared per ISO 9296 33 - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 42
PS4210 Installation Guide 7 Other Information You Might Need 34 - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 43
records creating 24 access controls setting up with CLI 23 accounts configuring after setup 29 array choosing where to mount 6 initializing 17 mounting in rack 6 network address 17 RAID policy 21 software configuration 17 B battery charging time 13 bezel installing 8 C cables 10GB copper 9 10GB - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 44
mount choosing rail location 6 inserting chassis 6 installing chassis 6 requirements 3 RAID levels supported 21 RAID policy description 21 setting with CLI 21 setting with GUI 21 Remote Setup Wizard configuring the software 20 36 S safety precautions installation 3 serial cable characteristics 15 - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 45
naming 23 reported size 23 snapshot space 23 target name for 28 thin provisioning settings 23 W warranty 31 Index: warranty - warranty 37 - Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 46
- Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 47
- Dell EqualLogic PS4210 | Storage Arrays - Installation and Setup Guide - Page 48
Printed in www.dell.com | support.dell.com
Dell EqualLogic PS4210 Storage Arrays
Installation and Setup Guide