Dell DL4000 Backup and Recovery Appliance - Interoperability Guide
Dell DL4000 Manual
 |
View all Dell DL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell DL4000 manual content summary:
- Dell DL4000 | Backup and Recovery Appliance - Interoperability Guide - Page 1
Dell DL4000 Backup and Recovery Appliance - Interoperability Guide This document provides information about the supported hardware and software versions for the Dell DL4000 Backup and Recovery Appliance. NOTE: The versions specified in this document use the same format as found on http://dell.com/ - Dell DL4000 | Backup and Recovery Appliance - Interoperability Guide - Page 2
Driver Revision 16.2.0.4 or later 12.0.150.0 or later 16.2.0.4 or later Fiber Channel Controllers System DL4000 High Capacity only HBA Qlogic QLE 2562 Emulex LPE 12002 Driver Revision 9.1.11.28 or later 2.72.205.4 or later 2 ׀ Dell DL4000 Backup and Recovery Appliance Interoperability Guide - Dell DL4000 | Backup and Recovery Appliance - Interoperability Guide - Page 3
Twinax, 3m X Cisco 10Gb SFP+ Twinax, 5m X Fiber Channel Switch System DL4000 High Capacity only Switch Brocade 8GB FC models Dell Cust Kit SKU 332-1665 332-1368 332-1666 330-8721 SFP-H10GB-CU1M SFP-H10GB-CU3M SFP-H10GB-CU5M Dell DL4000 Backup and Recovery Appliance Interoperability Guide l 3 - Dell DL4000 | Backup and Recovery Appliance - Interoperability Guide - Page 4
or later 1 21.2.0-0007 or later Driver Revision 6.801.05.00 or later 6.801.05.00 or later Display Resolution The minimum display resolution is 1280x1024. Supported Software This section lists the supported operating systems and applications on the Dell DL4000 Backup and Recovery Appliance. NOTE - Dell DL4000 | Backup and Recovery Appliance - Interoperability Guide - Page 5
laws. Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies. October 2014 Rev. A01 Dell DL4000 Backup and Recovery Appliance Interoperability Guide l 5
-
1 -
2 -
3 -
4 -
5
 |
 |
Dell DL4000 Backup and Recovery Appliance - Interoperability Guide
This document provides information about the supported hardware and software versions for the Dell DL4000
Backup and Recovery Appliance.
NOTE:
The versions specified in this document use the same format as found on
http://dell.com/support/downloads/
and may
differ from the version information displayed in the Windows® Device Manager or Dell™ OpenManage™ Server
Administrator.
Supported Hardware
This section lists the hardware supported by DL4000 system. Where applicable, firmware and driver versions are
also listed.
BIOS Versions
System
BIOS Version
DL4000
2.3.0 or later
Memory
System
Version
Total
Type
DL4000
Standard
64GB
Eight (8) 8GB 1600Mhz RDIMM
High Capacity
128GB
Eight (8) 16GB 1600MHz RDIMM
NOTE:
Early versions of the DL4000 Standard may be upgraded from 32GB to 64GB by replacing the eight (8) 4GB RDIMM with
eight (8) Dell 8GB 1600MHz RDIMM.
Hard Drives (Internal)
System
Internal RAID
Controller
Slots
Drive Type
RAID Level
DL4000
PERC H710P
0-1
Two (2) hot-swappable 2.5-inch SAS drives
1
2-9
Eight (2) hot-swappable 2.5-inch Nearline SAS drives
6
Dell DL4000 Backup and Recovery Appliance Interoperability Guide
l
1