Dell AUA-4000/Dell User Guide

Dell AUA-4000/Dell - Adaptec USB2connect 4000 USB 2.0 Host Adapter Manual

Get Dell AUA-4000/Dell - Adaptec USB2connect 4000 USB 2.0 Host Adapter PDF manuals and user guides
UPC - 000000127066
View all Dell AUA-4000/Dell manuals
Add to My Manuals
Save this manual to your list of manuals

Dell AUA-4000/Dell manual content summary:

  • Dell AUA-4000/Dell | User Guide - Page 1
    USB2connect Host Bus Adapter User's Guide R
  • Dell AUA-4000/Dell | User Guide - Page 2
    are trademarks of Microsoft Corporation in the U.S. and other countries, used under license. Macintosh and Power Macintosh are registered trademarks of Apple Computer, used under license. All other trademarks are the property of their respective owners. Changes The material in this document is for
  • Dell AUA-4000/Dell | User Guide - Page 3
    To speak with a Technical Support Specialist, For Hardware products call +1 408-934-7274, Monday-Friday, 3:00 A.M. to 5:00 P.M., Pacific Time. For RAID and Fibre Channel call +1 321-207-2000 Monday-Friday, 3:00 A.M. to 5:00 P.M., Pacific Time. To expedite your service, have your computer in front of
  • Dell AUA-4000/Dell | User Guide - Page 4
    13:30 to 16:30, Central European Time: I English: +32 2 352 3470 I French: +32 2 352 3460 To expedite your service, have your computer in front of you. I German: To speak with a Technical Support Specialist, call +49 89 456 40660, Monday-Thursday, 9:30 to 12:30 and 13:30 to 16:30; Friday, 9:30
  • Dell AUA-4000/Dell | User Guide - Page 5
    , and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is the separation between equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Dell AUA-4000/Dell | User Guide - Page 6
    Bus Adaper is a USB 2.0 PCI host adapter for PC and Macintosh computers that provides connectivity to USB 1.1 and USB 2.0 devices. USB 2.0, or Controller Interface (OHCI) devices. With three external ports on the AUA-3100LP, five on the AUA-5100, and one internal USB port on each, you can easily
  • Dell AUA-4000/Dell | User Guide - Page 7
    98 SE section later in this guide for detailed instructions. I Windows 98 SE users might have to install drivers from the operating system CD. All other supported operating systems should have compatible embedded drivers. I USB2connect does not support Deep Sleep on Power Macintosh G4 systems
  • Dell AUA-4000/Dell | User Guide - Page 8
    AUA-3100LP or AUA-5100) I One 10-foot (3-meter), USB 2.0 certified, high-speed cable used to connect USB devices I Hardware Installation Guide of This Guide This guide explains how to install USB2connect into an available PCI slot and verify that USB drivers are installed. This guide also reviews
  • Dell AUA-4000/Dell | User Guide - Page 9
    and disconnect the power cord. 1 After you turn OFF your computer and unplug the power cord, open the computer cabinet. Note: See your computer documentation for specific instructions on opening your computer cabinet. 2 Locate an unused 32-bit or 64-bit PCI expansion slot and remove the expansion
  • Dell AUA-4000/Dell | User Guide - Page 10
    be level with the expansion slot. 5 Close the computer cabinet and reattach the power cord. The USB2connect AUA-5100 adapter shares one internal and external connector so jumpers according to the figure below. Changing jumpers on the AUA-5100: External Port Enabled (default) All 5 external ports
  • Dell AUA-4000/Dell | User Guide - Page 11
    USB2connect User's Guide Installing the Windows Drivers Once the USB2connect is installed in your computer, complete the following steps as appropriate for your operating system to install a software driver for the adapter. Note: It is important that you complete the New Hardware Wizard for your
  • Dell AUA-4000/Dell | User Guide - Page 12
    2 If you see a message that the PCI Universal Serial Bus driver was not located, select the option Automatic search for a beetter driver (Recommended). Click Next. 3 If you do not have a USB 2.0 driver for USB2connect, the Add New Hardware Wizard displays the message Windows was unable to locate
  • Dell AUA-4000/Dell | User Guide - Page 13
    USB2connect User's Guide 4 To verify that the driver is installed under the Universal Serial Bus Host Controller section right-click My Computer, select Properties, and then select the Device Manager tab. USB2.0 function; see Note below USB1.1 drivers for the USB2connect Note: Under Other devices, a
  • Dell AUA-4000/Dell | User Guide - Page 14
    have administrator privileges to install USB2connect in the Windows 2000 operating system. 1 Power up the computer. During the operating system startup, the adapter will be detected and Windows will load embedded drivers for the adapter. Note: It may take longer than usual for your system to restart
  • Dell AUA-4000/Dell | User Guide - Page 15
    USB2connect User's Guide 3 On the Install Hardware Device Drivers window, select the option Search for a suitable driver for my device (recommended). Click Next. 4 On the Locate Driver Files window, uncheck all the options. Click Next. 10
  • Dell AUA-4000/Dell | User Guide - Page 16
    Installing the Windows Drivers 5 On the Driver Files Search Results window, select the default option Disable the device. Otherwise the operating system will attempt to locate a USB 2.0 driver each time you start the computer. Click Finish. 11
  • Dell AUA-4000/Dell | User Guide - Page 17
    User's Guide 6 To verify that the driver is installed under the Universal Serial Bus Host Controller section, right-click My Computer, select Properties, then select the Hardware tab. To open the Device Manager, click the Device Manager button. USB2.0 unction-see note below USB1.1 drivers for the
  • Dell AUA-4000/Dell | User Guide - Page 18
    USB 2.0) Windows 98 SE requires all these devices to be installed. Please follow these instructions carefully. 1 When the Add New Hardware Wizard opens, click Next. 2 Select Search for the best driver for your device (recommended). Click Next. 3 On the following window, uncheck all options. Click
  • Dell AUA-4000/Dell | User Guide - Page 19
    USB2connect User's Guide 4 Select The updated driver (recommended). Click Next. 5 You may see a message that Windows is searching for the driver. Click Next. 6 When you see the following prompt, insert your Windows 98 CD in your CD-ROM drive and click OK. 14
  • Dell AUA-4000/Dell | User Guide - Page 20
    drive letter for your CD-ROM drive in the Copy files from box as shown below and click OK. Note: If you have copied your driver files onto your hard drive and know where they are located, you can browse to that folder instead of inserting the Windows 98 CD. Also
  • Dell AUA-4000/Dell | User Guide - Page 21
    USB2connect User's Guide 9 At this point, the driver for the first OHCI (USB 1.1) controller is installed. To install the driver for the second OHCI controller, repeat steps 1-8. To install the USB 2.0 EHCI driver, repeat steps 1-3. The following window will display. Click Next. 10 Windows displays
  • Dell AUA-4000/Dell | User Guide - Page 22
    are installed under the Universal Serial Bus Host Controller section, right-click My Computer, select Properties, and then select the Device Manager tab. USB2.0 function; see Note below USB1.1 drivers for the USB2connect Note: Under Other devices, a yellow ! appears before PCI Universal Serial
  • Dell AUA-4000/Dell | User Guide - Page 23
    USB2connect User's Guide Installing the Macintosh Driver 1 Power up the computer. Insert the USB2connect CD into your CD-ROM drive. 2 Double-click the Start Installation Here file on the CD. 3 Follow the instructions to install the latest Macintosh USB drivers, if necessary. 4 Double-click the
  • Dell AUA-4000/Dell | User Guide - Page 24
    hot-plugging, allowing USB devices to be attached and recognized even when the computer is powered ON. Some peripheral manufacturers support hot-plugging in different ways. See instructions for each device to determine the best way to attach and mount the peripheral. The following figure shows
  • Dell AUA-4000/Dell | User Guide - Page 25
    for information on this.) I Check the Windows 2000 Event Log if you encounter problems loading the drivers on your Windows 2000 operating system. I Check the troubleshooting section of your operating system user's guide. I Check the Readme file on the USB2connect CD if you encounter any
  • Dell AUA-4000/Dell | User Guide - Page 26
    Apple USB extensions are loaded and enabled. If so, verify that the card is seated properly. If you are still unable to resolve a problem, see the Adaptec Web site at http://www.adaptec.com or the Adaptec Support Knowledgebase at http://ask.adaptec.com for additional troubleshooting information. 21
  • Dell AUA-4000/Dell | User Guide - Page 27
    R © 2001 Adaptec, Inc. All rights reserved. P/N: 512882-06, Ver AA KM 05/01
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
R
USB2connect Host Bus Adapter
User’s Guide