DIRECTV SWM8R103 Brochure
DIRECTV SWM8R103 Manual
 |
View all DIRECTV SWM8R103 manuals
Add to My Manuals
Save this manual to your list of manuals |
DIRECTV SWM8R103 manual content summary:
- DIRECTV SWM8R103 | Brochure - Page 1
designated SWM output frequency channels. FEATURES: • Provides eight (8) independent channels for supporting up to 8 DIRECTV satellite tuners • Provides two outputs to serve two customer dwellings (typical) • range Die-cast aluminum waterproof housing suitable for indoor and outdoor installation
-
1
 |
 |
SWM-8
Single Wire Multi-Switch (8 Channel)
Model #
Description
Part #
SWM-8
Eight (8) channel Single Wire Multi-switch (SWM). Allows any
transponder from any satellite input to be independently selected and
distributed via one of eight designated SWM output frequency channels.
217502
FEATURES:
•
Provides eight (8) independent channels for supporting up to 8 DIRECTV satellite tuners
•
Provides two outputs to serve two customer dwellings (typical)
•
Contains a built-in di-plexer for combining off-air signals with DIRECTV satellite signals
onto a single home-run wire to the dwelling
•
Provides AGC for the satellite input signal.
•
Die-cast housing is suitable for both indoor and outdoor use.
•
Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover
existing 99°/101°, 103°/110°/119° satellites, plus two Flex Ports (95º sat and 72.5º sat)
PARAMETER
UNIT
SWM-8
Input Frequency Range
MHz
MHz
MHz
250 – 2150 (Satellite)
54 – 806 (Terrestrial & SMATV)
5 – 40 (Return Path) — CMTS return
path must use 33-40 MHz band
Number of Input Ports
Satellite
Off-air Terrestrial & SMATV /CMTS
Each
Each
6
1
Input Signal Power Level
dBm
-45 to -15 dBm per transponder
Output Frequency Range
MHz
950 – 2150 (Satellite)
54 – 806 (Terrestrial & SMATV)
SWM Channel frequencies:
Channel 1 through 9
MHz
950 – 1800
Number of SWM Module Output Ports
Satellite
Off-air Terrestrial & SMATV & Return Path
Each
Each
6 per SWM Module
1 per SWM Module
Output Signal Power Level
dBm
-31 dBm (min) per SWM channel
DC Power
Power Supply (24Vdc, 2.1A)
Each
Powered from FMC-6 Chassis via
legacy 3 input port
Ground stud
qty
1
Dimensions LxWxH
mm
167x145x35
Weight
kg
0.5
Environmental Requirements
Operating temperature range
Humidity
Mechanical Housing
°C
-34 to +52
The component shall survive
exposure to 95% relative humidity
over operating temperature range
Die-cast aluminum waterproof
housing suitable for indoor and
outdoor installation