D-Link R12 User Manual

D-Link R12 Manual

Get D-Link R12 PDF manuals and user guides View all D-Link R12 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link R12 manual content summary:

  • D-Link R12 | User Manual - Page 1
    5 AC1200 SMART ROUTER R12
  • D-Link R12 | User Manual - Page 2
    the U.S. and other countries. App StoreSM is a service mark of Apple Inc. Chrome™ browser, Google Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. D-Link R12 User Manual
  • D-Link R12 | User Manual - Page 3
    ErP Power Usage This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a powersaving Network Standby mode within 1 minute of no packets being transmitted. R12 Network Standby: 1.77W D-Link R12 User Manual ii
  • D-Link R12 | User Manual - Page 4
    D-Link Cloud 62 Operation Mode 63 Features 64 Parental Control 64 QoS Engine 67 Firewall 69 Firewall Settings - IPv4/IPv6 Rules 71 Port Forwarding 73 Port Forwarding - Virtual Server 75 Static Routes - IPv4 77 Static Routes - IPv6 78 Dynamic DNS 79 Management 81 D-Link R12 User Manual
  • D-Link R12 | User Manual - Page 5
    PRO AI 89 Voice Control 93 Link D-Link Cloud Service with Other Services 94 Amazon Alexa Setup 99 Amazon Troubleshooting 112 Wireless Basics 114 Networking Basics 118 Wireless Security 120 Technical Specifications 121 Wall Mounting 122 Regulatory Statements 123 D-Link R12 User Manual
  • D-Link R12 | User Manual - Page 6
    , 1m) Quick Installation Guide If any of the above items are missing or damaged, please contact your local reseller. Note: Using a power supply with a different voltage rating than the one included with the router will cause damage and void the warranty for this product. D-Link R12 User Manual 1
  • D-Link R12 | User Manual - Page 7
    IEEE 802.11 ac/n/g/b/a wireless clients • 10/100/1000 Mbps Ethernet Web-based Configuration Utility Requirements Computer with the following: • Windows®, Macintosh, or Linux-based operating system description of the app's page to check whether your device is compatible.) D-Link R12 User Manual 2
  • D-Link R12 | User Manual - Page 8
    in weekly reports. Advanced Quality of Service Features The Quality of Service (QoS) allows you to prioritize important instructions to add your device. You can opt to use the web-based utility for basic configuration and advanced features. Furthermore, the support range. D-Link R12 User Manual 3
  • D-Link R12 | User Manual - Page 9
    device is booting up or performing factory reset. The device is undergoing the firmware upgrade process. The Internet connection is established. The device cannot connect to the Internet. The device processing WPS if the above 2.4 GHz LED is blinking at the same time. D-Link R12 User Manual 4
  • D-Link R12 | User Manual - Page 10
    , and servers. 4 Gigabit Internet Port Use an Ethernet cable to connect your broadband modem to this port. 5 Power Connector Connector for the supplied power adapter. D-Link R12 User Manual 5
  • D-Link R12 | User Manual - Page 11
    service information provided by your Internet Service Provider handy. This information is likely to include your DSL account's username and password. Your ISP may also supply you with additional WAN configuration settings or you will not be able to connect to the Internet. D-Link R12 User Manual 6
  • D-Link R12 | User Manual - Page 12
    wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter's range base transmits a signal even if the phone is not in use. D-Link R12 User Manual 7
  • D-Link R12 | User Manual - Page 13
    on page 10. • D-Link Setup Wizard - This wizard will launch when you log in to the router using your browser for the first time. Refer to Setup Wizard on page 13. • Manual Setup - Log in to the router to manually configure your router. Refer to Configuration on page 20 D-Link R12 User Manual 8
  • D-Link R12 | User Manual - Page 14
    The EAGLE PRO AI allows you to install and configure your R12 from your compatible Android or iOS device. Note: R12-0088 Step 3 Tap Install New Device. Scan the setup code on the device label on the bottom of the router. Follow the on-screen instructions to complete the setup. D-Link R12 User Manual
  • D-Link R12 | User Manual - Page 15
    Modem Section 2 - Installation Hardware Setup Step 1 Position your R12 near your Internet-connected modem. Place it in an open area for better wireless coverage. Step 2 3 Use the Ethernet cable to connect your modem to the port labelled INTERNET on the router. Modem D-Link R12 User Manual 10
  • D-Link R12 | User Manual - Page 16
    solid white. Step 6 If you are configuring the router wirelessly from a PC, connect instructions on WiFi network connection. Note: The Wi-Fi name (SSID), Wi-Fi password, and device password are printed on the device label on the bottom of the device. SSID: Password : Modem D-Link R12 User Manual
  • D-Link R12 | User Manual - Page 17
    on your computer. Step 7 If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web browser and connecting to a website. If the website does not load, proceed to Setup Wizard on page 13. Modem D-Link R12 User Manual 12
  • D-Link R12 | User Manual - Page 18
    to guide you through a step-by-step process of configuring your new R12 for configuration are printed on the device label on the bottom of the device. http://xxxx.devicesetup.net/ Agree to the Terms of Use and Privacy Policy before proceeding to the Operation Mode page. D-Link R12 User Manual
  • D-Link R12 | User Manual - Page 19
    Section 2 - Installation Depending on your selection for operation mode, follow the on-screen instructions to configure your new D-Link device and connect to the Internet. Click Next to continue. Connect the router and the modem with an Ethernet cable. D-Link R12 User Manual 14
  • D-Link R12 | User Manual - Page 20
    will be displayed. Select your Internet connection type (this information can be obtained from your Internet Service Provider). Click Next to continue. If the router detects or you select PPPoE, enter your software is no longer needed and will not work through a router. D-Link R12 User Manual 15
  • D-Link R12 | User Manual - Page 21
    your Wi-Fi network. Your wireless clients will need this network password to be able to connect to the wireless network. Click Next to continue. D-Link R12 User Manual 16
  • D-Link R12 | User Manual - Page 22
    be 8-15 characters and contains both numbers and letters. Note: It is strongly recommended that you change the default device password for accessing the web configuration page. Click Next to continue. Select your time zone from the drop-down menu. Click Next to continue. D-Link R12 User Manual 17
  • D-Link R12 | User Manual - Page 23
    Section 2 - Installation Keeping your router's firmware up-to-date provides you with the latest protection and new features over the air. Choose whether to keep You will be presented with a summary of your settings. Click Next to apply the settings or Back to make changes. D-Link R12 User Manual 18
  • D-Link R12 | User Manual - Page 24
    router during this time. Your new settings have been saved and your router is now configured. Click OK to close the Setup Wizard. Congratulations, your device has been successfully configured! You can log in to the web configuration interface with the Admin Password. D-Link R12 User Manual 19
  • D-Link R12 | User Manual - Page 25
    Section 3 - Configuration Configuration If this is your first time installing the router, open your web browser and enter the default management Fi Optimizer to receive messages. Note: The system will automatically log out after a period (180 seconds) of inactivity. D-Link R12 User Manual 20
  • D-Link R12 | User Manual - Page 26
    Section 3 - Configuration Home The Home page displays the status of the router in the form of an interactive diagram. You can click each icon is disconnected, click Click to repair to bring up the setup wizard, refer to the Setup Wizard on page 13 for more information. D-Link R12 User Manual 21
  • D-Link R12 | User Manual - Page 27
    Section 3 - Configuration Internet To bring up more details about your Internet connection, click on the Internet icon. Click IPv4 or IPv6 to the Internet. To reconnect, click Renew IP Address. To reconfigure the Internet settings, refer to Internet - IPv4 on page 27. D-Link R12 User Manual 22
  • D-Link R12 | User Manual - Page 28
    Section 3 - Configuration R12 Click on the R12 icon to view details about the router and its wireless settings. Here you can see the router's current Wi-Fi lower right, or click Settings > Wireless menu (in the left pane). Refer to Wireless on page 53 for more information. D-Link R12 User Manual 23
  • D-Link R12 | User Manual - Page 29
    Section 3 - Configuration Connected Clients Click on the Connected Clients icon to obtain information about the connected clients of the router. On this a client or edit a client's settings such as IP reservation and parental control, click on the client you want to edit. D-Link R12 User Manual 24
  • D-Link R12 | User Manual - Page 30
    Section 3 - Configuration Edit Rule Name Enter a custom name for this client. Vendor Displays the vendor of the client. MAC Address Displays the to unwanted websites. Refer to Features > Parental Control on page 64 for more information. Click Save when you are done. D-Link R12 User Manual 25
  • D-Link R12 | User Manual - Page 31
    the first time. Refer to Setup Wizard on page 13 for details. Note: When the Wizard is opened, the router will disconnect from the Internet. D-Link R12 User Manual 26
  • D-Link R12 | User Manual - Page 32
    network connection details, click the IPv6 tab. Refer to Internet - IPv6 on page 37. To configure VLAN connection details, click the VLAN link. Refer to Internet - VLAN on page 51. Click Save at any time to save the L2TP refer to page 34 For IPv4 - DS-Lite refer to page 36 D-Link R12 User Manual 27
  • D-Link R12 | User Manual - Page 33
    Section 3 - Configuration IPv4 - Dynamic IP (DHCP) Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not port's MAC address with the MAC address of a connected client. D-Link R12 User Manual 28
  • D-Link R12 | User Manual - Page 34
    Section 3 - Configuration IPv4 - Static IP Select Static IP if your IP information is provided by your Internet Service Provider (ISP). Click Save at any time to save the changes you replace the INTERNET port's MAC address with the MAC address of a connected client. D-Link R12 User Manual 29
  • D-Link R12 | User Manual - Page 35
    by your ISP. Select either Always on, On Demand, or Manual. Configurable when On Demand is selected. Enter a maximum idle time during which Service Name Enter the ISP service name (optional) Primary DNS Server Enter the primary DNS server IP address assigned by your ISP. D-Link R12 User Manual 30
  • D-Link R12 | User Manual - Page 36
    Section 3 - Configuration Secondary DNS Server Enter the secondary mode. IP Address Enter the IP address provided by your ISP. Service Name Enter the ISP service name (optional). Primary DNS Server Enter the primary DNS server IP the MAC address of a connected client. D-Link R12 User Manual 31
  • D-Link R12 | User Manual - Page 37
    Section 3 - Configuration IPv4 - PPTP Choose PPTP (Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username Primary DNS Server Enter the primary DNS server IP address assigned by your ISP. D-Link R12 User Manual 32
  • D-Link R12 | User Manual - Page 38
    Section 3 - Configuration Secondary DNS Server Enter the secondary DNS server IP address assigned by your ISP. MTU Maximum Transmission Unit (1280~1460) - Unit (1280~1460) - you may need to change the MTU for optimal performance with your ISP. The default is 1400. D-Link R12 User Manual 33
  • D-Link R12 | User Manual - Page 39
    Section 3 - Configuration IPv4 - L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses an L2TP connection. Your ISP will provide you with a username Secondary DNS Server Enter the secondary DNS server IP address assigned by your ISP. D-Link R12 User Manual 34
  • D-Link R12 | User Manual - Page 40
    Section 3 - Configuration MTU Maximum Transmission Unit (1280~1460) - you may need to change the MTU for optimal performance with your ISP. The default Unit (1280~1460) - you may need to change the MTU for optimal performance with your ISP. The default is 1400. D-Link R12 User Manual 35
  • D-Link R12 | User Manual - Page 41
    , the IPv6 WAN default gateway address will be displayed here. Advanced Settings... - Manual Configuration Option AFTR IPv6 Address Enter the Address FamilyTransition Router (AFTR) IPv6 address. This the IPv6 WAN default gateway address will Gateway be displayed here. D-Link R12 User Manual 36
  • D-Link R12 | User Manual - Page 42
    . For IPv6 - Auto Detection refer to page 38 For IPv6 - Static IPv6 refer to page 40 For IPv6 - Auto Configuration (SLAAC/DHCPv6) refer to page 42 For IPv6 - PPPoE refer to page 45 For IPv6 - 6rd refer to page 48 For IPv6 - Local Connectivity Only refer to page 50 D-Link R12 User Manual 37
  • D-Link R12 | User Manual - Page 43
    the router's LAN link-local address, which is used only Address within the local network. If Enable DHCP-PD is disabled, enter the following: LAN IPv6 Address Enter a valid LAN IPv6 address. LAN IPv6 Link-Local Displays the router's LAN link-local address. Address D-Link R12 User Manual 38
  • D-Link R12 | User Manual - Page 44
    Section 3 - Configuration Advanced Settings... - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment Enable or disable the Automatic IPv6 for the DHCP server's IPv6 assignment. Enter the dynamic IP's retention time. The default is 10080 minutes. D-Link R12 User Manual 39
  • D-Link R12 | User Manual - Page 45
    your IPv6 connection. Enter the primary DNS server address. Enter the secondary DNS server address. LAN IPv6 Address LAN IPv6 Link-Local Address LAN IPv6 Address Settings Enter the LAN (local) IPv6 address for the router. Displays the router's LAN link-local address. D-Link R12 User Manual 40
  • D-Link R12 | User Manual - Page 46
    Section 3 - Configuration Advanced Settings... - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment Enable or disable the Automatic IPv6 (End) assignment. IPv6 Address Lifetime Enter the dynamic IP's retention time. The default is 10080 minutes. D-Link R12 User Manual 41
  • D-Link R12 | User Manual - Page 47
    IPv6 Link-Local Displays the router's LAN link-local address. Address If Enable DHCP-PD is disabled, configure the following: LAN IPv6 Address Enter a valid LAN IPv6 address. LAN IPv6 Link-Local Displays the router's LAN link-local address for the local Address network only. D-Link R12 User Manual
  • D-Link R12 | User Manual - Page 48
    Section 3 - Configuration Advanced Settings... - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment Enable or disable the Automatic IPv6 ) assignment. IPv6 Address Enter the end IPv6 address for the DHCP server's IPv6 Range (End) assignment. D-Link R12 User Manual 43
  • D-Link R12 | User Manual - Page 49
    Section 3 - Configuration Advanced Settings... - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment Enable or disable the Automatic . IPv6 Address Lifetime Enter the IP address retention period in minutes. The default is 10080 minutes. D-Link R12 User Manual 44
  • D-Link R12 | User Manual - Page 50
    IP. Configurable if Static IP is chosen. Enter the IP address provided by your ISP. Enter the ISP service name (optional). Select either Always On or Manual. Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The default is 1492 bytes. D-Link R12 User
  • D-Link R12 | User Manual - Page 51
    Link-Local Address LAN IPv6 Address Settings Enable or disable prefix delegation. This option is only available if the Dynamic IP is used for Address Mode. Enter the IPv6 address provided by your ISP. Displays the router's LAN link-local address for the local network only. D-Link R12 User Manual
  • D-Link R12 | User Manual - Page 52
    Section 3 - Configuration Advanced Settings... - Address Autoconfiguration Settings Enable Automatic IPv6 Address Assignment Enable or disable the Automatic IPv6 ) assignment. IPv6 Address Enter the end IPv6 address for the DHCP server's IPv6 Range (End) assignment. D-Link R12 User Manual 47
  • D-Link R12 | User Manual - Page 53
    the 6rd Configuration: 6rd IPv6 Prefix Enter the 6rd IPv6 network address and prefix length (1~128) supplied by your ISP. WAN IPv4 Address Enter the IPv4 network prefix. 6rd Border Relay IPv4 Enter the 6rd border relay IPv4 address settings supplied by Address your ISP. D-Link R12 User Manual 48
  • D-Link R12 | User Manual - Page 54
    Section 3 - Configuration LAN IPv6 Address LAN IPv6 Link-Local Address LAN IPv6 Address Settings Displays the router's LAN IPv6 address. Displays the router's LAN link-local address. Lifetime Enter the IPv6 address lifetime (in minutes). The default is 10080 minutes. D-Link R12 User Manual 49
  • D-Link R12 | User Manual - Page 55
    Section 3 - Configuration IPv6 - Local Connectivity Only Local Connectivity Only allows you to set up an IPv6 connection that will not connect to ... - Current IPv6 ULA Settings Current ULA Prefix Displays the current ULA prefix. LAN IPv6 ULA Displays the LAN's IPv6 ULA. D-Link R12 User Manual 50
  • D-Link R12 | User Manual - Page 56
    details, click the IPv6 link. Refer to Internet - IPv6 on page 37 Click Save at any time to save the changes you have made on this page. Status Click to enable or disable the Triple-Play VLAN feature. More configuration options will be available if the Status is enabled. D-Link R12 User Manual 51
  • D-Link R12 | User Manual - Page 57
    Port 1-4 Interface Traffic Type Setting Select the type of connection (Internet, IPTV, or VoIP) coming from the Internet connection to each interface on the router. D-Link R12 User Manual 52
  • D-Link R12 | User Manual - Page 58
    Section 3 - Configuration Wireless Go to Settings > Wireless to see your wireless network settings for your router. Click Save at any time Create a Wi-Fi password. Wireless clients will need to enter this password (8-63 characters) to successfully connect to the network. D-Link R12 User Manual 53
  • D-Link R12 | User Manual - Page 59
    Section 3 - Configuration Wireless - Advanced Settings... Security Mode Choose None, WPA/WPA2-Personal, WPA2-Personal, WPA2/ WPA3-Personal, or WPA3-Personal. . Password Create a Wi-Fi password. Wireless clients will need to enter this password to connect to the network. D-Link R12 User Manual 54
  • D-Link R12 | User Manual - Page 60
    Section 3 - Configuration Security Mode 2.4GHz - Advanced Settings... Choose None, WPA/WPA2-Personal, WPA2-Personal, WPA2/ WPA3-Personal, or WPA3-Personal. WPA3 time and drag to the end time. You can add multiple days and multiple periods per day to the schedule. D-Link R12 User Manual 55
  • D-Link R12 | User Manual - Page 61
    Section 3 - Configuration Security Mode 5GHz - Advanced Settings... Choose None, WPA/WPA2-Personal, WPA2-Personal, WPA2/ WPA3-Personal, or WPA3-Personal. WPA3 provides time and drag to the end time. You can add multiple days and multiple periods per day to the schedule. D-Link R12 User Manual 56
  • D-Link R12 | User Manual - Page 62
    wireless devices to the router is with Wi-Fi Protected Setup (WPS). WPS-PBC Status Enable or disable WPS-PBC (Push Button Configuration) functionality. Press to establish a connection with another WPS compatible device. Note that WPS will be disabled if WPA3 is used. D-Link R12 User Manual 57
  • D-Link R12 | User Manual - Page 63
    Zone Go to Settings > Wireless, then click the Guest Zone tab to configure your guest Wi-Fi. The Guest Zone feature allows you to create a temporary zone that can be used by and drag to the end time. You can add multiple days and multiple periods per day to the schedule. D-Link R12 User Manual 58
  • D-Link R12 | User Manual - Page 64
    Section 3 - Configuration Security Mode Advanced Settings Choose None, WPA/WPA2-Personal, WPA2-Personal, WPA2/ WPA3-Personal, or WPA3-Personal. Enabling this option will confine connectivity to the Internet and prevent guests from accessing other local network devices. D-Link R12 User Manual 59
  • D-Link R12 | User Manual - Page 65
    R12-xxxx with a name of your choice. Enter the domain name (optional). Disable this option to transfer the DNS server information from your ISP to network clients for setting DNS server. If enabled, network clients will then set the router's IP address as the DNS server. D-Link R12 User Manual
  • D-Link R12 | User Manual - Page 66
    Section 3 - Configuration Status DHCP IP Address Range DHCP Lease Time Always Broadcast WAN Port Speed UPnP IPv4 Multicast Streams IPv6 Multicast default. Allow or disallow IPv6 multicast traffic to pass through the router from the Internet. This is enabled by default. D-Link R12 User Manual 61
  • D-Link R12 | User Manual - Page 67
    This page lists whether you are registered with D-Link Cloud Service and email address associated with the account. It enables you to manage your device anytime, anywhere and check the status of your router. Use EAGLE PRO AI to find out more about D-Link Cloud's features. D-Link R12 User Manual 62
  • D-Link R12 | User Manual - Page 68
    configure the router to function as one of the following types of network device: router or extender. Router Mode: In this mode, the R12 directly connects to the Internet provided by your ISP (Internet Service manage the extender through the main router under this mode. D-Link R12 User Manual 63
  • D-Link R12 | User Manual - Page 69
    Demand. Edit Edit this access profile. Delete Remove this access profile. To add a profile, configure the following: Schedule Profile Name Enter a name for this profile. Allow Internet Access Time Click , all devices in this profile will be denied Internet access. D-Link R12 User Manual 64
  • D-Link R12 | User Manual - Page 70
    Section 3 - Configuration Block Internet Access During Bedtime Allow Limited Access Click Enabled and define the schedule to block Internet access during for a selected profile, you can click Internet access to specified devices of the profile immediately. to pause D-Link R12 User Manual 65
  • D-Link R12 | User Manual - Page 71
    3 - Configuration Click Settings to view the messages displayed to the device users whose Internet access has been restricted. Blocked Webpage Message For these access controls: Manual Pause Control, default. Display the presentation of the message on a new webpage. D-Link R12 User Manual 66
  • D-Link R12 | User Manual - Page 72
    the upload and download speeds of your Internet service. Determining Internet speed helps the QoS engine to distribute Wi-Fi bandwidth to prioritized devices (configured in the device cards below). AI Traffic the Speed Test to automatically fill in the above information. D-Link R12 User Manual 67
  • D-Link R12 | User Manual - Page 73
    Section 3 - Configuration This Quality of Service (QoS) Engine allows you to prioritize particular clients over others, so that these clients receive higher 4 Hours, for 2 Hours, or for 1 Hour; Low: Always Enable, for 1 Day, for 4 Hours, for 2 Hours, or for 1 Hour. D-Link R12 User Manual 68
  • D-Link R12 | User Manual - Page 74
    from certain kinds of "spoofing" attacks. Enable or disable IPv6 simple security. A simple firewall configuration that denies access directly to computers behind the router. Enable or disable IPv6 ingress filtering for incoming packets to prevent suspicious senders. D-Link R12 User Manual 69
  • D-Link R12 | User Manual - Page 75
    Application Level Gateway (ALG) Configuration Different ALGs provide special to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This Application Level Gateway (ALG trouble making VoIP calls, try turning this ALG off. D-Link R12 User Manual 70
  • D-Link R12 | User Manual - Page 76
    or the IPv6 Rules tab to configure rules for traffic filtering based on parameters like IP addresses with port numbers. To configure the Firewall Advanced settings, click the Advanced link. Refer to Firewall on page wish to create a new rule, click the Add Rule button. D-Link R12 User Manual 71
  • D-Link R12 | User Manual - Page 77
    Section 3 - Configuration If you click Edit or Add Rule, the following options will appear: Name Enter a name for the rule. Source IP section. Refer to Management > Time & Schedule - Schedule on page 82 for more information. A maximum of 24 rules can be defined. D-Link R12 User Manual 72
  • D-Link R12 | User Manual - Page 78
    from the Internet can be redirected to a DMZ host using Port Forwarding. To configure the Virtual Server settings, click the Virtual Server link. Refer to Port Forwarding - Virtual Server on page 75. Click Save at you want to create a new rule, click the Add Rule button. D-Link R12 User Manual 73
  • D-Link R12 | User Manual - Page 79
    Configuration If you click Edit or Add Rule, the following options will appear: Name Enter a name for the rule. Local IP Enter the IP address of the computer on your local network to which you want to direct the incoming service Schedule on page 82 for more information. D-Link R12 User Manual 74
  • D-Link R12 | User Manual - Page 80
    a mapped port. This might be necessary if you are hosting services behind the router. To configure the Port Forwarding settings, click the Port Forwarding link. Refer to Port Forwarding on page 73 Click Save at any you wish to create a new rule, click the Add Rule button. D-Link R12 User Manual 75
  • D-Link R12 | User Manual - Page 81
    Configuration If you click on Edit or Add Rule, the following options will appear: Name Enter a name for the rule. Alternatively, select the protocol/ Application Name from the drop-down menu. Depending on the requested service, the router redirects the external service D-Link R12 User Manual 76
  • D-Link R12 | User Manual - Page 82
    Go to Features > Static Routes to define custom routes to control how traffic moves around your network. To configure the Static Route IPv6 settings, click the IPv6 tab. Refer to Static Routes - IPv6 on page 78 will use to transit out of the router when this route is used. D-Link R12 User Manual 77
  • D-Link R12 | User Manual - Page 83
    Static Routes - IPv6 Go to Features > Static Routes, then click IPv6 to configure the IPv6 Static Routes. To configure the Static Route IPv4 settings, click the IPv4 tab. Refer to Static Routes - IPv4 packet will use to transit out of the router when this route is used. D-Link R12 User Manual 78
  • D-Link R12 | User Manual - Page 84
    menu. Enter the host name that you registered with your dynamic DNS service provider. Enter your dynamic DNS account name. Enter your dynamic DNS account password. Enter a time-out value (in hours) to indicate how often the router should update its Dynamic DNS settings. D-Link R12 User Manual 79
  • D-Link R12 | User Manual - Page 85
    you registered with your dynamic DNS service provider. IPv6 Address Enter the IPv6 address of your host or server for DDNS configuration. Alternatively, select the network interface from client devices for DDNS configuration. A maximum of 10 records can be defined. D-Link R12 User Manual 80
  • D-Link R12 | User Manual - Page 86
    time. Automatic Time Configuration NTP Server Select from the drop-down menu to use one of the following servers to synchronize the time and date for your router: D-Link NTP Server or Google NTP Server. Choose Manual to set the NTP server's IP address or server name. D-Link R12 User Manual 81
  • D-Link R12 | User Manual - Page 87
    Settings in Features > Firewall as well as sending system logs via email in Management > System Log. To configure the Time settings, click the Time tab. Refer to Time & Schedule - Time on page 81 Click Save the page. Then click Save when you are done creating schedules. D-Link R12 User Manual 82
  • D-Link R12 | User Manual - Page 88
    this box to send system logs to a SysLog Server. Configurable if Enable Logging to Syslog Server is enabled. Enter the IP address of the Syslog server. If the Syslog server is connected to the router, select it from the drop-down menu to automatically populate the field. D-Link R12 User Manual 83
  • D-Link R12 | User Manual - Page 89
    is always up to date on the operation of the router. The email account for sending logs is configured in the above section. Schedule If you enable Send On Schedule, use the drop-down menu to select to Time & Schedule - Schedule on page 82 for more information. D-Link R12 User Manual 84
  • D-Link R12 | User Manual - Page 90
    Remote Enable remote management over the Internet using an Management encrypted HTTP connection. Remote Admin Port Specify the port number for accessing the web configuration interface. The default is 8081. LED Control Status LED Turn the LED status lights on or off. D-Link R12 User Manual 85
  • D-Link R12 | User Manual - Page 91
    Auto Reboot Configuration Click this button to reboot the router immediately. You may set the router to automatically reboot at a set time. The options are Never, Daily, or Weekly. You may set the day, as well as the hour and minute of the day for automatic reboot. D-Link R12 User Manual 86
  • D-Link R12 | User Manual - Page 92
    automatically upgrade to the latest firmware every day at 3:30-4:00 AM. Enable this function to set the router to automatically upgrade its firmware at a set time every day. Configurable if Choose Upgrade Time is enabled. Set the hour and minute for automatic upgrade. D-Link R12 User Manual 87
  • D-Link R12 | User Manual - Page 93
    Section 3 - Configuration Statistics Go to Management > Statistics. On the Statistics page you can view the amount of traffic that passes through the and data that are sent and received through the interface. The traffic counter will reset if the device is rebooted. D-Link R12 User Manual 88
  • D-Link R12 | User Manual - Page 94
    Configuration EAGLE PRO AI With the EAGLE PRO AI on your smart devices, you can get the R12 up and running quickly. Just plug in the router, open the app and build your home network by following the easy instructions Monday at 8 AM local time. D-Link R12 User Manual 89
  • D-Link R12 | User Manual - Page 95
    Section 3 - Configuration AI Traffic Optimizer: To enable this function, open the app. From the Home screen, tap the main router, scroll the Internet except during the hours that you specify. Note that bedtime restriction takes precedence over the allowed schedules here. D-Link R12 User Manual 90
  • D-Link R12 | User Manual - Page 96
    Section 3 - Configuration You can also block specific websites on this page to prevent the specified devices from accessing these websites. scheduling also restricts local access by disabling Wi-Fi connectivity. However, remote management through the Internet is allowed. D-Link R12 User Manual 91
  • D-Link R12 | User Manual - Page 97
    and settings: name, IP and MAC address, hardware and firmware version, time zone, and model number. You can also configure the Internet connection method and change the device password on this effective duration for this device: Always, 1 Day, 4 Hours, 2 Hours, or 1 Hour. D-Link R12 User Manual 92
  • D-Link R12 | User Manual - Page 98
    your Wi-Fi guest zone without logging in to the web interface, rebooting the router, and checking your router for firmware upgrades. In order to use third-party services to control and manage your device, please register your device with D-Link Cloud Service first. D-Link R12 User Manual 93
  • D-Link R12 | User Manual - Page 99
    third-party apps to control and manage your device, you will first need to link your D-Link account with the app such as Google Assistant. Step 1 Launch EAGLE PRO AI and go to the Home screen. Step 2 Tap Voice Control from the Home screen. D-Link R12 User Manual 94
  • D-Link R12 | User Manual - Page 100
    Section 4 - Third Party Services Step 3 Choose the cloud service. Step 4 Link your Google account. D-Link R12 User Manual 95
  • D-Link R12 | User Manual - Page 101
    your system, note that if the account link page does not display, please tap "+" on the top left from the above step to add the device manually: Tap + Set up device, choose Works with Google, and search for EAGLE PRO AI. Then sign in using your registered D-Link account. D-Link R12 User Manual 96
  • D-Link R12 | User Manual - Page 102
    Section 4 - Third Party Services Step 7 Choose your device. Step 8 Choose a home. D-Link R12 User Manual 97
  • D-Link R12 | User Manual - Page 103
    Section 4 - Third Party Services Step 9 Choose a location for your device. Step 10 Device is now successfully set up with the Google Home. D-Link R12 User Manual 98
  • D-Link R12 | User Manual - Page 104
    Alexa app, an Amazon account, and a D-Link account to use this feature. Note: The screenshots may be different depending on your mobile device's OS version. However, the process is the same. Step 1 Launch the Amazon Alexa app. Step 2 Tap Browse Skills. Amazon Alexa D-Link R12 User Manual 99
  • D-Link R12 | User Manual - Page 105
    Section 4 - Third Party Services Step 3 Search EAGLE PRO AI for Skills & Games. Step 4 The EAGLE PRO AI page. D-Link R12 User Manual 100
  • D-Link R12 | User Manual - Page 106
    Third Party Services Step 5 Tap LAUNCH to link the skill. Step 6 Congratulations! EAGLE PRO AI has been successfully linked as a skill for your Amazon device. Refer to Amazon Alexa Voice Commands on the next page for tasks that you can ask your Amazon Alexa to perform. D-Link R12 User Manual 101
  • D-Link R12 | User Manual - Page 107
    Section 4 - Third Party Services Amazon Alexa Voice Commands With EAGLE PRO AI enabled as a skill for Alexa, you can ask Alexa to do any of the following AI to enable my guest Wi-Fi." 2. "Alex, talk to EAGLE PRO AI" and wait for Alexa to respond. Then say your command. D-Link R12 User Manual 102
  • D-Link R12 | User Manual - Page 108
    Assistant Setup You will need the Google Assistant app, a Google account, and a D-Link Cloud Service account to use this feature. Note: The screenshots may be different depending on your mobile 2 Tap Edit to customize the pin code or use the randomly generated number. D-Link R12 User Manual 103
  • D-Link R12 | User Manual - Page 109
    4 - Third Party Services Step 3 Launch the Google Assistant app. Assistant Step 4 Say or type in your command and provide the pin code as required. Refer to Google Assistant Voice Commands on the next page for tasks that you can ask your Google Assistant to perform. D-Link R12 User Manual 104
  • D-Link R12 | User Manual - Page 110
    Third Party Services Google Assistant Voice Commands With EAGLE PRO AI linked with the the guest Wi-Fi password Reboot the router Update the router Notes: 1. Only supported on Nest Hub with screen display. 2. Network can be substituted for Wi-Fi saying "Hey Google." D-Link R12 User Manual 105
  • D-Link R12 | User Manual - Page 111
    WPS) that you can press to connect to the router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable 1 minute for your connection to be configured. Once the LEDs stop blinking, you will be connected. D-Link R12 User Manual 106
  • D-Link R12 | User Manual - Page 112
    benefits offered by Wi-Fi 6 and WPA3, please make sure that your operating system and wireless network adapter support Wi-Fi 6. To join an existing network, locate the wireless network icon in the taskbar, next to connect to this wireless network when it is detected. D-Link R12 User Manual 107
  • D-Link R12 | User Manual - Page 113
    Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function. D-Link R12 User Manual 108
  • D-Link R12 | User Manual - Page 114
    Section 6 - Connect a Wireless Client to your Router When you have established a successful connection with a wireless network, the word Connected will appear next to the name of the network to which you are connected. dlink D-Link R12 User Manual 109
  • D-Link R12 | User Manual - Page 115
    recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security Basics on page 118 for more information. Wireless Icon D-Link R12 User Manual 110
  • D-Link R12 | User Manual - Page 116
    fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link R12 User Manual 111
  • D-Link R12 | User Manual - Page 117
    running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate and Norton Personal Firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link R12 User Manual 112
  • D-Link R12 | User Manual - Page 118
    Troubleshooting • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for the web configuration. • If you still cannot access the web configuration printed on the device label. D-Link R12 User Manual 113
  • D-Link R12 | User Manual - Page 119
    supports link. What is Wireless? Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or office network. D-Link R12 User Manual
  • D-Link R12 | User Manual - Page 120
    batteries. Who uses wireless? Wireless technology has become so popular in recent years that almost everyone is using it, whether it's for home, office, business, D-Link has a wireless solution for it. D-Link R12 User Manual 115
  • D-Link R12 | User Manual - Page 121
    to attract people. The wireless connection in public places is usually called "hotspots". Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote tips to help you through the process of setting up a wireless network. D-Link R12 User Manual 116
  • D-Link R12 | User Manual - Page 122
    your next-door neighbors or intruders connect to your wireless network. Encrypt your wireless network with the latest WPA3 security protocol. Refer to the product manual for detail information on how to set it up. D-Link R12 User Manual 117
  • D-Link R12 | User Manual - Page 123
    C - Networking Basics Check your IP address Networking Basics After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link R12 User Manual 118
  • D-Link R12 | User Manual - Page 124
    6 Properties (TCP/IPv6). Then select Use the Following IP Address. 4. Under Edit IP settings, select Manual. If IPv4 is selected, type the IP address settings in IP address, Subnet prefix length (subnet mask a DNS server from your ISP. 5. When you're done, click Save. D-Link R12 User Manual 119
  • D-Link R12 | User Manual - Page 125
    has the strongest encryption among these with the increased cryptographic capability and the requirements of the Protected Management Frames (PMFs) to protect from snooping attack. D-Link R12 User Manual 120
  • D-Link R12 | User Manual - Page 126
    affect wireless signal range. 2 Frequency Range varies depending on country's regulation. 3 The router does not include 5.25-5.35 GHz & 5.47-5.725 GHz in some regions. D-Link R12 User Manual 121
  • D-Link R12 | User Manual - Page 127
    holes into the base of the router over them. The screw head should project out from the wall at 7 mm (0.28 in) as shown below. D-Link R12 User Manual 122
  • D-Link R12 | User Manual - Page 128
    radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that to USA operational channels only. This device is restricted to indoor use. D-Link R12 User Manual 123
  • D-Link R12 | User Manual - Page 129
    mêmes canaux; (ii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. D-Link R12 User Manual 124
  • D-Link R12 | User Manual - Page 130
    not possible. Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection d'autres canaux n'est pas possible. D-Link R12 User Manual 125
  • D-Link R12 | User Manual - Page 131
    Fréquence bande(s) Bandas de Frecuencia Frequenza/e Frequentie(s) 5.15 - 5.25 GHz 5.25 - 5.35 GHz 5.47 - 5.725 GHz 2.4 - 2.4835 GHz D-Link R12 User Manual Max. Output Power (EIRP) Max. Output Power Consommation d'énergie max. Potencia máxima de Salida Potenza max. Output Max. Output Power 200 mW
  • D-Link R12 | User Manual - Page 132
    dichiara che questo prodotto, i relativi accessori e il software sono conformi alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE e il firmware del prodotto sono disponibili per il download dalla pagina del prodotto su www.dlink.com. D-Link R12 User Manual 127
  • D-Link R12 | User Manual - Page 133
    Slovensky [Slovak] Suomi [Finnish] Svenska[Swedish] D-Link R12 User Manual Ar šo uzņēmums D-Link Corporation apliecina, ka šis produkts, piederumi un . O texto completo da declaração de conformidade da UE e do firmware Podjetje D-Link Corporation s tem izjavlja, da so ta izdelek, dodatna oprema in
  • D-Link R12 | User Manual - Page 134
    heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www. dlink.com. Herved erklærer D-Link Corporation at dette produktet, tilbehøret og programvaren er i samsvar med direktivet 2014/53/EU. Den fullstendige outlet should be near the device and easily accessible. D-Link R12 User Manual 129
  • D-Link R12 | User Manual - Page 135
    -to-peer communication between two client devices without an Access Point. • Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link R12 User Manual 130
  • D-Link R12 | User Manual - Page 136
    de 5 GHz au sein de l'UE. • Merci de vous référer au guide d'utilisation ou de la fiche technique afin de vérifier si votre produit utilise 2.4 el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link R12 User Manual 131
  • D-Link R12 | User Manual - Page 137
    Control) richieste per operare a 5 Ghz nell'Unione europea. • Ti invitiamo a fare riferimento al manuale del prodotto o alla scheda tecnica per verificare se il tuo prodotto utilizza le frequenze 2,4 GHz te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link R12 User Manual 132
  • D-Link R12 | User Manual - Page 138
    Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read and follow the instructions in the user manual. • Do not spill und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link R12 User Manual 133
  • D-Link R12 | User Manual - Page 139
    nunca. Para algunos productos con batería reemplazable por el usuario, lea y siga las instrucciones del manual de usuario. • No derrame comida o líquidos sobre el producto y nunca deje que caigan objetos de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link R12 User Manual 134
  • D-Link R12 | User Manual - Page 140
    Per alcuni prodotti dotati di batteria sostituibile dall'utente, leggere e seguire le istruzioni riportate nel manuale dell'utente. • Non versare cibi o liquidi sul prodotto e non spingere mai alcun voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link R12 User Manual 135
  • D-Link R12 | User Manual - Page 141
    in this manner you help to conserve the environment and protect human health. D-Link and the Environment At D-Link, we understand and are committed to reducing any impact our operations and products Sie entsprechende Informationen im Internet unter www.dlinkgreen.com. D-Link R12 User Manual 136
  • D-Link R12 | User Manual - Page 142
    apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir las emisiones de CO2. Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio www.dlinkgreen.com. D-Link R12 User Manual 137
  • D-Link R12 | User Manual - Page 143
    D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies. Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen. D-Link R12 User Manual 138
  • D-Link R12 | User Manual - Page 144
    ály. Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit energii a snížit emise CO2. Více informací o našich ekologických výrobcích a obalech najdete na adrese www.dlinkgreen.com. D-Link R12 User Manual 139
  • D-Link R12 | User Manual - Page 145
    . D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp. For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til www.dlinkgreen.com. D-Link R12 User Manual
  • D-Link R12 | User Manual - Page 146
    D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin autat säästämään energiaa ja vähentämään hiilidioksiidipäästöjä. Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com. D-Link R12 User Manual 141
  • D-Link R12 | User Manual - Page 147
    que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar energia e reduzir as emissões de CO2. Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite www.dlinkgreen.com. D-Link R12 User Manual 142
  • D-Link R12 | User Manual - Page 148
    Appendix G - Regulatory Information AC1200 R12 單元 鉛 (Pb) 汞 (Hg) 鎘 (Cd Cr+6 PBB) 外殼 - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 線材 - ○ ○ ○ ○ 備考1 2 PBDE D-Link R12 User Manual 143
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148