D-Link DWR-960 Product Manual
D-Link DWR-960 Manual
 |
View all D-Link DWR-960 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DWR-960 manual content summary:
- D-Link DWR-960 | Product Manual - Page 1
Version 1.00 | 27/10/2021 User Manual Wireless AC1200 4G LTE Router DWR-960 - D-Link DWR-960 | Product Manual - Page 2
trademarks or registered trademarks of their respective companies. Copyright © 2021 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. D-Link DWR-960 User Manual i - D-Link DWR-960 | Product Manual - Page 3
Access 14 Setup Wizard 15 Internet Settings 16 Network Status 16 Failover 17 D-Link DWR-960 User Manual Internet Settings 18 APN Settings 20 Connection Mode Settings 22 PIN Management 23 My 43 Date & Time 44 Settings Profile 46 Reset / Reboot 48 Firmware Upgrade 49 System Logs 50 ii - D-Link DWR-960 | Product Manual - Page 4
a Wireless Network 55 Using Windows 10 55 Using Windows 8 57 Using Windows 7 59 Using Windows® XP 62 Troubleshooting 63 Networking Basics 65 Check your IP address 65 Statically Assign an IP address 66 Technical Specifications 67 Regulatory Information 68 D-Link DWR-960 User Manual iii - D-Link DWR-960 | Product Manual - Page 5
Section 1 - Product Overview Product Overview Package Contents D-Link DWR-960 Wireless AC1200 4G LTE Router Power Adapter 3G/4G Antennas RJ45 Cable If any of the above items are missing or damaged, please contact your reseller. D-Link DWR-960 User Manual 1 - D-Link DWR-960 | Product Manual - Page 6
®, Macintosh, or Linux-based operating system Browser Requirements: • Internet Explorer 9 or higher • Firefox 12 or higher • Safari 4 or higher • Chrome 20 or higher 1 Subject to services and service terms available from your carrier. D-Link DWR-960 User Manual 2 - D-Link DWR-960 | Product Manual - Page 7
in LTE antenna provides a reliable connection to your mobile service provider, and separate internal Wi-Fi antenna give extended coverage to the computers and wireless devices connected to the DWR-960. signal strength, network activity, and environmental conditions. D-Link DWR-960 User Manual 3 - D-Link DWR-960 | Product Manual - Page 8
and then off except the Power LED which will remain on during the reset. 4 LED Indicators Status display. Please refer to LED Indicators on page 6. D-Link DWR-960 User Manual 4 - D-Link DWR-960 | Product Manual - Page 9
as NAS (Network Attached Storage) or switch. Use a RJ-45 Ethernet cable to connect the device to an Ethernet-based cable, DSL or fiber modem. D-Link DWR-960 User Manual 5 - D-Link DWR-960 | Product Manual - Page 10
. Traffic is being transmitted over LTE/Ethernet WAN. Connected to a 2G/3G network. Traffic is being transmitted over 2G/3G. No SIM/UICC card inserted or no Internet service. Indicates mobile connection signal strength. The stronger the signal, the more the lit bars. D-Link DWR-960 User Manual 6 - D-Link DWR-960 | Product Manual - Page 11
guide you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in an attic or garage. Initial Setup Ensure that your DWR-960 , please refer to LED Indicators on page 6. D-Link DWR-960 User Manual 7 - D-Link DWR-960 | Product Manual - Page 12
Section 2 - Installation Wireless Installation Considerations The DWR-960 can be accessed using a wireless connection from anywhere within the operating range of ceiling fans, fluorescent lights, and home security systems may dramatically degrade wireless connectivity. D-Link DWR-960 User Manual 8 - D-Link DWR-960 | Product Manual - Page 13
utility that can be accessed via your web browser. Initial Connection to the Router By default, the DWR-960 comes configured to work with most 4G SIM/UICC cards. If you wish to configure the router, , and the other end into the Ethernet port on your computer. Modem D-Link DWR-960 User Manual 9 - D-Link DWR-960 | Product Manual - Page 14
-Fi interface's MAC address). Note that the default SSID and password can be found on the device label on the bottom of the device . dlink_DWR-960-5G_xxxx Once you have located your DWR-960's wireless network, select it and click Connect. dlink_DWR-960-5G_xxxx D-Link DWR-960 User Manual 10 - D-Link DWR-960 | Product Manual - Page 15
configuration process. You can also set up a connection using the Windows built-in WPS feature. Please see Connecting to a Wireless Network on page 55. dlink_DWR-960-5G_xxxx D-Link DWR-960 User Manual 11 - D-Link DWR-960 | Product Manual - Page 16
blank on the login page. You will be required to change the password when logging in for the first time. Click Sign in to continue. D-Link DWR-960 User Manual 12 - D-Link DWR-960 | Product Manual - Page 17
to view system information, change your login information, and upgrade the firmware. SMS From the SMS tab, you can send and receive SMS text messages, as well as send USSD (Unstructured Supplementary Service Data) codes, also known as "Quick Codes" or "Feature Codes." D-Link DWR-960 User Manual 13 - D-Link DWR-960 | Product Manual - Page 18
Always Connect and Manual Connect. Wi-Fi The Wi-Fi section displays the number of devices currently connected to the router wirelessly via the 2.4 GHz and 5 GHz band. Short Messages This area displays the number of SMS messages in your inbox and your draft messages. D-Link DWR-960 User Manual 14 - D-Link DWR-960 | Product Manual - Page 19
. APN For LTE/3G On this page, you can configure your Access Point Name (APN) settings. Depending on your mobile service provider, you may have to configure the optional settings manually. Please consult to click Apply for the configurations to take effective. D-Link DWR-960 User Manual 15 - D-Link DWR-960 | Product Manual - Page 20
Received Power (RSRP), which measures the power level in the LTE cell network. LTE Cat Indicates the category of the LTE. Band Indicates the LTE frequency band. Network Status IP Address (IPV4) Displays your may be reset when the battery or SIM/UICC card is removed. D-Link DWR-960 User Manual 16 - D-Link DWR-960 | Product Manual - Page 21
fails. Failover Failover Select either one of the following to be the preferred connection method if both are connected: • Ethernet WAN Preference • Cellular WAN Preference D-Link DWR-960 User Manual 17 - D-Link DWR-960 | Product Manual - Page 22
. Select Keep Alive, On Demand, or Manual. Idle Time Configurable when On Demand is selected. Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Keep Alive or Manual as the operation mode. D-Link DWR-960 User Manual 18 - D-Link DWR-960 | Product Manual - Page 23
WAN Connection Type: Host Name The host name is optional but may be required by some ISPs. Leave it blank if you are not sure. D-Link DWR-960 User Manual 19 - D-Link DWR-960 | Product Manual - Page 24
after it has been powered on, or has been disconnected from its current mobile network. Manual - Enter the Access Point Name (APN) for the connection. If you do not know this information, please contact your service provider. Click Apply to save your changes. D-Link DWR-960 User Manual 20 - D-Link DWR-960 | Product Manual - Page 25
from the drop-down list. If no options are available, use the manual configuration on the previous page. User Name Enter the username to be your service provider. For more information refer to Connection Mode Settings on page 22. Click Apply to save your changes. D-Link DWR-960 User Manual 21 - D-Link DWR-960 | Product Manual - Page 26
3G mobile network. LTE mode - Only connects to a LTE/4G mobile network. Manual for Internet connection. If you select Manual Connection Mode: Connect/Disconnect Toggle the switch to enable or disable your Internet manually connection. Click Apply to save your changes. D-Link DWR-960 User Manual - D-Link DWR-960 | Product Manual - Page 27
Configuration PIN Management This section allows you to lock the SIM/UICC card currently inserted into the DWR-960. SIM No. of Retry The number of retries left to access your SIM/UICC. Note: If Enter your SIM/UICC pin code here. Click Apply to save your changes. D-Link DWR-960 User Manual 23 - D-Link DWR-960 | Product Manual - Page 28
the current mode the DWR-960 is operating in. Select Automatic to allow the DWR-960 to automatically connect to the first available network when roaming. Select Manual to choose your preferred roaming network from the list below. Click Apply to save your changes. D-Link DWR-960 User Manual 24 - D-Link DWR-960 | Product Manual - Page 29
the Search box to find your desired network. Note: You will need to manually disconnect from the current mobile data service before selecting a network using PLMN. Available Operators ID ID number assigned to 's access technology. Click Apply to save your changes. D-Link DWR-960 User Manual 25 - D-Link DWR-960 | Product Manual - Page 30
is enabled. IP Address Your router's IP address. Subnet Your router's subnet mask. MAC Address The MAC address of the respective Wi-Fi network interface. D-Link DWR-960 User Manual 26 - D-Link DWR-960 | Product Manual - Page 31
Clients will only be able to associate with the router using the WPA2 standard. Clients that do not support WPA2 will not be able to associate with the router. AES - A newer encryption with stronger protection . Select this option for compatibility with old devices. D-Link DWR-960 User Manual 27 - D-Link DWR-960 | Product Manual - Page 32
buttons next to the keys. Each key allows you to use either 64 bit or 128 bit characters. Click Apply to save the current settings. D-Link DWR-960 User Manual 28 - D-Link DWR-960 | Product Manual - Page 33
for your wireless environment. Note that not all channels are available in all regions. If you cannot see your SSID from your client device, try manually setting a low-numbered channel. Click Apply to save your changes. D-Link DWR-960 User Manual 29 - D-Link DWR-960 | Product Manual - Page 34
recommended. To use this feature: 1. Click the Start Via PIN to start the WPS process. 2. Follow the user manual of the client device for entering the PIN for WPS. On Windows 7, select the network name you want to connect, then you will be prompted to enter the PIN. D-Link DWR-960 User Manual 30 - D-Link DWR-960 | Product Manual - Page 35
in the MAC Filter on page 34. You can delete the entry to permit its access on that page. Click Apply to save your changes. D-Link DWR-960 User Manual 31 - D-Link DWR-960 | Product Manual - Page 36
with the following information: Host Name: The host name of the client computer. IP Address: The client's IP address that is assigned by the DHCP service. MAC Address: The MAC address of the client device. Click Apply to save your changes. D-Link DWR-960 User Manual 32 - D-Link DWR-960 | Product Manual - Page 37
your router's DHCP service, configure the IP address for the DWR-960, and set the range of IP addresses assigned by the DHCP server. DHCP Service DHCP Service Enable or disable the DHCP Service. IP Address Click by the DHCP server. Click Apply to save your changes. D-Link DWR-960 User Manual 33 - D-Link DWR-960 | Product Manual - Page 38
button and manually enter the MAC address of the client that you want to deny access to your network. Note: You can view the current list of clients connected to your network and their MAC addresses in Wi-Fi Clients on page 31. Click Apply to save your changes. D-Link DWR-960 User Manual 34 - D-Link DWR-960 | Product Manual - Page 39
this client from the list. MAC Address Specify the MAC address of the computer to be filtered. Add New Click the Add New button and manually enter the MAC address of the client that you want to deny access to your network. Click Apply to save your changes. D-Link DWR-960 User Manual 35 - D-Link DWR-960 | Product Manual - Page 40
Allows clients to connect to their corporate network or VPN using the IPsec protocol. L2TP Pass Through Allows clients to connect to their corporate network or VPN using the L2TP protocol. WAN Ping Blocking When enabled the DWR-960 will not respond to pings from WAN. D-Link DWR-960 User Manual 36 - D-Link DWR-960 | Product Manual - Page 41
Section 3 - Configuration Remote Management Clicking this toggle allows access to web configuration over the Internet. This setting may open your router to external security threats and is not recommended for most users. Click Apply to save your changes. D-Link DWR-960 User Manual 37 - D-Link DWR-960 | Product Manual - Page 42
firewall settings. Please refer to Firewall Settings on page 36. The DWR-960 supports a maximum of 50 filters. If you turn on Firewall Enable: service. Destination Port The destination port number for the associated Number service. Click Apply to save your changes. D-Link DWR-960 User Manual 38 - D-Link DWR-960 | Product Manual - Page 43
Numbers. Destination IP The destination IP address of virtual server. Private Port The internal port to open for this service. Global Port The public port to open for this service. Click Add New to add a new virtual server. Then click Apply to save your changes. D-Link DWR-960 User Manual 39 - D-Link DWR-960 | Product Manual - Page 44
name that is supported on the router. Host Name Enter the host name that you registered with your dynamic DNS service provider. Username / E-mail Enter your dynamic DNS username. Password / Key Enter your dynamic DNS password. Click Apply to save your changes. D-Link DWR-960 User Manual 40 - D-Link DWR-960 | Product Manual - Page 45
devices. Model Name The model name of your D-Link router. System Uptime The length of time since last restart. Note: The FW version number displayed on the image above may differ from the model you have purchased due to firmware updates or regional variation. D-Link DWR-960 User Manual 41 - D-Link DWR-960 | Product Manual - Page 46
on the drop-down arrow to select the elapsed time before being automatically logged out of the web configuration. Click Apply to save your changes. D-Link DWR-960 User Manual 42 - D-Link DWR-960 | Product Manual - Page 47
Section 3 - Configuration Language This tab allows you to change the default language setting. Language Select your desired language of the web configuration interface. Click Apply to save your changes. D-Link DWR-960 User Manual 43 - D-Link DWR-960 | Product Manual - Page 48
(in hours) how frequently the Cycle DWR-960 will update the time from an SNTP server. Daylight Saving Enable this option if your region uses Daylight Saving Time. If you have selected Enable, enter the start date and end date. Click Apply to save your changes. D-Link DWR-960 User Manual 44 - D-Link DWR-960 | Product Manual - Page 49
AM/ PM) manually. Current Time The current time for the time zone you have selected is displayed here. Daylight Saving Enable this option if your region uses Daylight Saving Time. Enter the start date and end date after it is enabled. Click Apply to save your changes. D-Link DWR-960 User Manual 45 - D-Link DWR-960 | Product Manual - Page 50
tab you can export your current configuration to a computer. To Get Current Profile Click the Click Me button to download the current settings of your DWR-960. It will be in .sav file format and will be saved in your browser's download directory. D-Link DWR-960 User Manual 46 - D-Link DWR-960 | Product Manual - Page 51
Section 3 - Configuration Import Profiles On the Import Profiles tab, you can import previously saved settings for the router. Select Browse your computer for previously exported settings. Click Apply Import to restore the router to a previously configured state. D-Link DWR-960 User Manual 47 - D-Link DWR-960 | Product Manual - Page 52
paperclip to press and hold the reset button on the router for 5 seconds. Reset to Default Select the Reset to Default button to reset the DWR-960 to factory default settings. Reboot Select the Reboot button to reboot the DWR-960. D-Link DWR-960 User Manual 48 - D-Link DWR-960 | Product Manual - Page 53
differ from your router due to firmware updates or regional variation. Note: Do not unplug the device or interrupt the upgrade process (upgrade in progress is shown on the right) until the process is complete. Interrupting The upgrade process may corrupt the device. D-Link DWR-960 User Manual 49 - D-Link DWR-960 | Product Manual - Page 54
Section 3 - Configuration System Logs The System Logs page displays all of the router's logs. Here you can view, refresh and clear system logs. D-Link DWR-960 User Manual 50 - D-Link DWR-960 | Product Manual - Page 55
the client device. Note: Devices not on the Configured rules list will not be affected by the control policies. Click Apply to save your changes. D-Link DWR-960 User Manual 51 - D-Link DWR-960 | Product Manual - Page 56
Short Message Service (SMS) DWR-960 device. Current Short The current number of messages in the Inbox and Messages Drafts. SMS Center Your SIM/UICC card's contact number, which should Number be preset by your wireless network operator. Click Apply to save your changes. D-Link DWR-960 User Manual - D-Link DWR-960 | Product Manual - Page 57
) allows ISP-specific applications to be activated using instant messaging services. USSD USSD Code Enter an application activation code and click the Send button. This allows you to activate applications or information services by sending a message to your ISP. D-Link DWR-960 User Manual 53 - D-Link DWR-960 | Product Manual - Page 58
utility with WPS) that you can press to connect to the router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once the LEDs stop blinking, you will be connected using WPA2 encryption. D-Link DWR-960 User Manual 54 - D-Link DWR-960 | Product Manual - Page 59
- Configuration Connecting to a Wireless Network Using Windows 10 When connecting to the DWR-960 wirelessly for the first time, obtain the default network name (SSID) and security Select the desired network by clicking on the SSID. Wireless Icon dlink_DWR-960-5G_xxxx D-Link DWR-960 User Manual 55 - D-Link DWR-960 | Product Manual - Page 60
connect with the router when your device next detects the SSID, check Connect Automatically. dlink_DWR-960-5G_xxxx You will then be prompted to enter the network security key (Wi-Fi password) for to this wireless network when it is detected. dlink_DWR-960-5G_xxxx D-Link DWR-960 User Manual 56 - D-Link DWR-960 | Product Manual - Page 61
display a list of wireless networks within connecting proximity of your computer. Select the desired network by clicking on the network name. Wireless Icon dlink_DWR-960_xxxx D-Link DWR-960 User Manual 57 - D-Link DWR-960 | Product Manual - Page 62
you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected. D-Link DWR-960 User Manual dlink_DWR-960_xxxx 58 - D-Link DWR-960 | Product Manual - Page 63
network. If you are using another company's utility or Windows 2000, please refer to the user manual of your wireless adapter for help with wireless connection. Most utilities will have a "site survey" wireless networks in your area. Wireless Icon dlink_DWR-960_xxxx D-Link DWR-960 User Manual 59 - D-Link DWR-960 | Product Manual - Page 64
cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to Networking Basics on page 65 for more information. dlink_DWR-960_xxxx D-Link DWR-960 User Manual 60 - D-Link DWR-960 | Product Manual - Page 65
, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one configured on the wireless router. D-Link DWR-960 User Manual 61 - D-Link DWR-960 | Product Manual - Page 66
Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another company's utility or Windows® 2000, please refer to the user manual of your wireless adapter for Basics on page 65 for more information. dlink_DWR-960_xxxx D-Link DWR-960 User Manual 62 - D-Link DWR-960 | Product Manual - Page 67
Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DWR-960. Read the following descriptions if you are having problems. multiple computers, try connecting using a different computer. D-Link DWR-960 User Manual 63 - D-Link DWR-960 | Product Manual - Page 68
Section 5 - Troubleshooting 2. What can I do if I forgot my password? If you forgot your password, you must reset your router. Please note that The default IP address is 192.168.0.1. When logging in, leave the password field blank which is the default admin password. D-Link DWR-960 User Manual 64 - D-Link DWR-960 | Product Manual - Page 69
A - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address . Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DWR-960 User Manual 65 - D-Link DWR-960 | Product Manual - Page 70
Appendix A - Networking Basics Statically Assign an IP address If you are not using the DHCP service on the router, or you need to assign a static IP address, please follow the steps below: Step enter a DNS server from your ISP. Step 5 When you're done, click Save. D-Link DWR-960 User Manual 66 - D-Link DWR-960 | Product Manual - Page 71
10 to 70 ˚C (14 to 158 ˚F) SIM/UICC Slot • Standard mini-SIM/UICC card interface 1 Supported frequency band is dependent upon regional hardware version. 2 Data rates are theoretical. Data transfer rate depends on network capacity, signal strength, and other factors. D-Link DWR-960 User Manual 67 - D-Link DWR-960 | Product Manual - Page 72
G GSM-900 GSM1800 WCDMA FDD I WCDMA FDD VIII LTE Band 1 LTE Band 3 Frequency Band(s) Frequenzband Fréquence bande(s) Bandas MHz TX 1710.7 MHz - 1784.3 MHz RX 1805.7 MHz - 1879.3 MHz D-Link DWR-960 User Manual Max. Output Power (EIRP) Max. Output Power Consommation d'énergie max. Potencia máxima - D-Link DWR-960 | Product Manual - Page 73
Appendix C - Regulatory Information LTE Band 7 LTE Band 8 LTE Band 20 LTE Band 38 TX 2502.5 MHz - 2567.5 MHz RX 2622.5 MHz - 2687.5 MHz TX 880.7 MHz - 914.3 MHz RX 2617.5 MHz 25 dBm (Power class 3) 25 dBm (Power class 3) 25 dBm (Power class 3) 25 dBm (Power class 3) D-Link DWR-960 User Manual 69 - D-Link DWR-960 | Product Manual - Page 74
dichiara che questo prodotto, i relativi accessori e il software sono conformi alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE e il firmware del prodotto sono disponibili per il download dalla pagina del prodotto su www.dlink.com. D-Link DWR-960 User Manual 70 - D-Link DWR-960 | Product Manual - Page 75
dlink.com. D-Link Corporation täten vakuuttaa, että tämä tuote, lisävarusteet ja ohjelmisto ovat direktiivin 2014/53/EU vaatimusten mukaisia. Täydellinen EU-vaatimustenmukaisuusvakuutus samoin kuin tuotteen laiteohjelmisto ovat ladattavissa osoitteesta www.dlink.com. D-Link DWR-960 User Manual 71 - D-Link DWR-960 | Product Manual - Page 76
texten med EU-försäkran om överensstämmelse och produkt-firmware kan hämtas från produktsidan på www.dlink.com. Íslenska [Icelandic] Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúna should be near the device and easily accessible. D-Link DWR-960 User Manual 72 - D-Link DWR-960 | Product Manual - Page 77
-to-peer communication between two client devices without an Access Point. • Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link DWR-960 User Manual 73 - D-Link DWR-960 | Product Manual - Page 78
de 5 GHz au sein de l'UE. • Merci de vous référer au guide d'utilisation ou de la fiche technique afin de vérifier si votre produit utilise 2.4 el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link DWR-960 User Manual 74 - D-Link DWR-960 | Product Manual - Page 79
) richieste per operare a 5 Ghz nell'Unione europea. • Ti invitiamo a fare riferimento al manuale del prodotto o alla scheda tecnica per verificare se il tuo prodotto utilizza le frequenze 2,4 GHz te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link DWR-960 User Manual 75 - D-Link DWR-960 | Product Manual - Page 80
Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read and follow the instructions in the user manual. • Do not spill und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link DWR-960 User Manual 76 - D-Link DWR-960 | Product Manual - Page 81
nunca. Para algunos productos con batería reemplazable por el usuario, lea y siga las instrucciones del manual de usuario. • No derrame comida o líquidos sobre el producto y nunca deje que caigan objetos de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link DWR-960 User Manual 77 - D-Link DWR-960 | Product Manual - Page 82
alcuni prodotti dotati di batteria sostituibile dall'utente, leggere e seguire le istruzioni riportate nel manuale dell'utente. • Non versare cibi o liquidi sul prodotto e non spingere mai alcun voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DWR-960 User Manual 78 - D-Link DWR-960 | Product Manual - Page 83
this manner you help to conserve the environment and protect human health. D-Link and the Environment At D-Link, we understand and are committed to reducing any impact our operations and products Sie entsprechende Informationen im Internet unter www.dlinkgreen.com. D-Link DWR-960 User Manual 79 - D-Link DWR-960 | Product Manual - Page 84
apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir las emisiones de CO2. Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio www.dlinkgreen.com. D-Link DWR-960 User Manual 80 - D-Link DWR-960 | Product Manual - Page 85
D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies. Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen. D-Link DWR-960 User Manual - D-Link DWR-960 | Product Manual - Page 86
ly. Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit energii a snížit emise CO2. Více informací o našich ekologických výrobcích a obalech najdete na adrese www.dlinkgreen.com. D-Link DWR-960 User Manual 82 - D-Link DWR-960 | Product Manual - Page 87
Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp. For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til www.dlinkgreen.com. D-Link DWR-960 User Manual - D-Link DWR-960 | Product Manual - Page 88
D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin autat säästämään energiaa ja vähentämään hiilidioksiidipäästöjä. Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com. D-Link DWR-960 User Manual 84 - D-Link DWR-960 | Product Manual - Page 89
que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar energia e reduzir as emissões de CO2. Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite www.dlinkgreen.com. D-Link DWR-960 User Manual 85
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
 |
 |
DWR-960
User Manual
Wireless AC1200 4G LTE Router
Version 1.00 | 27/10/2021