D-Link DSA-3100P Manual

D-Link DSA-3100P - B/W Thermal Line Printer Manual

Get D-Link DSA-3100P - B/W Thermal Line Printer PDF manuals and user guides
UPC - 790069262906
View all D-Link DSA-3100P manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DSA-3100P manual content summary:

  • D-Link DSA-3100P | Manual - Page 1
    D-Link Airspot DSA-3100 Public/Private Gateway Manual March 2006 Rev. B Building Networks for People
  • D-Link DSA-3100P | Manual - Page 2
    Contents Package Contents 3 Introduction 4 Front Panel 5 Rear Panel 6 Features 7 Sample Scenarios 8 Installation 10 Setting Up the DSA-3100 11 Configure PCs on your LAN 12 TCP/IP Network Setting 12 Internet Access Configuration 13 Using the Configuration Utility 15 Networking Basics 56
  • D-Link DSA-3100P | Manual - Page 3
    Package Contents Contents of Package: 1 D-Link DSA-3100 Airspot Gateway 2 CD-ROM (containing Manual and Warranty) 3 Quick Installation Guide 4 Two (2) CAT5 UTP/Straight-through (Ethernet) cables 5 One (1) CAT5 UTP/Cross-over cable 6 One (1) Console cable 7 5V DC, 3A Power Adapter If any of the above
  • D-Link DSA-3100P | Manual - Page 4
    Link DSA-3100 Airspot Gateway is a simple-to-use network access control system supporting Ethernet, Fast Ethernet or an IEEE 802.11 wireless LAN (WLAN) separately and simultaneously. The DSA-3100 2000/2002. The DSA-3100 allows the operator to offer wired or wireless networking services and access to
  • D-Link DSA-3100P | Manual - Page 5
    power supply. WAN LED Link: A solid light indicates a connection on the WAN port. Act: This LED blinks during data transmission. Private Network - A solid light indicates a connection on the Private Network. This LED blinks during data transmission. Status LED - A solid LED indicates the DSA-3100
  • D-Link DSA-3100P | Manual - Page 6
    Rear Panel Console Port For resetting to factory defaults, or reconfiguring the device. For Advanced users only! Authentication Port (Public LAN or WLAN with Access Point) Connects to a switch or AP. Receptor for Power Adapter. Local Area Network Port (Private LAN)Connects to a switch for a
  • D-Link DSA-3100P | Manual - Page 7
    to 250 user accounts with an internal database. Supports at least 50 users accessing the Internet at any given time. Allows ID/Password-based (promotions, alerts, additional usage time/services with corresponding fees). Supports NAT for managed clients. Supports static IP, DHCP client and PPPoE
  • D-Link DSA-3100P | Manual - Page 8
    Sample Scenarios 8
  • D-Link DSA-3100P | Manual - Page 9
    Sample Scenarios (continued) 3 9
  • D-Link DSA-3100P | Manual - Page 10
    Installation Requirements Standard 10/100Base-T network (UTP/Cat5 Ethernet) cable with RJ45 connectors. TCP/IP network protocol must be installed on all networked computers and related devices. T1 10
  • D-Link DSA-3100P | Manual - Page 11
    or an access point for Hotspot access. All ports are auto-mdix, which means that you can use a straight-through or a crossover cable for connections. Power ON Connect the supplied power adapter to the DSA-3100 and insert the plug on the other end into an electric outlet. Check the LEDs The
  • D-Link DSA-3100P | Manual - Page 12
    Configure PCs on your LAN After installing the DSA-3100, each computer's TCP/IP network settings and Internet access configuration may need to be re-configured: TCP/IP network settings If your PC uses the default Windows XP/2000/Me/98SE setting, no changes need to be made. Just restart your PC. If
  • D-Link DSA-3100P | Manual - Page 13
    Internet Access Configuration To configure your PCs to use the DSA-3100 for Internet access, follow this procedure. For Windows 98SE/2000 Please select Start Menu - Control Panel Internet Options. Select the Connection tab, and click the Setup button. 13
  • D-Link DSA-3100P | Manual - Page 14
    the Setup button. Click Next on the New Connection Wizard screen. Select Connect to the Internet and click Next. Select Set up my connection manually and click Next. Check Connect using a broadband connection this always on and click Next. Click Finish to close the New Connection Wizard. Setup is
  • D-Link DSA-3100P | Manual - Page 15
    in the same subnet. https://192.168.0.40 Login Screen Log-in Screen You can log in as admin or as manager. admin - the administrator of the DSA-3100. User Name: admin Password: admin manager - access to the manager user account only. User Name: manager Password: manager After you log in, click Enter
  • D-Link DSA-3100P | Manual - Page 16
    the Configuration Utility in which you have made changes. Restart the DSA-3100 after completing any changes to its configuration. Home > Wizard The Installation Guide, included with your purchase. You can access the configuration features from this window. Home > User Manager The Home>User Manager
  • D-Link DSA-3100P | Manual - Page 17
    Succeed Page: DSA-3100 is the default system name. You may wish to rename it to indicate your company, department, or the service you would like to provide. You can edit the System Administrator's information here (e.g., name, phone number, and e-mail). If a user encounters a problem connecting to
  • D-Link DSA-3100P | Manual - Page 18
    . Subnet mask: Enter the subnet mask provided to you by your ISP. All devices on the network must have the same netmask. Default Gateway: Enter the IP address of the gateway, provided to you by your ISP. Dynamic IP Make this selection if there is a DHCP server in the network. Address: (See the
  • D-Link DSA-3100P | Manual - Page 19
    option to obtain an IP address automatically from your ISP. Renew Click Renew to renew the IP configuration. Most DSL users will select this option. Home > WAN > PPPoE User Name & Password: Enter the user name and password that is assigned by your ISP. Dial on demand: This field is optional. 19
  • D-Link DSA-3100P | Manual - Page 20
    Using the Configuration Utility (continued) Home > Public Network The DSA-3100 allows the gateway to be set to one of three Authentication modes. Mode: Select NAT; NAT_IP_PNP or Router NAT: This mode protects the identity of the devices within
  • D-Link DSA-3100P | Manual - Page 21
    present on the network. Primary DNS Server: Enter the IP address of the preferred DNS server. Secondary DNS Server: Enter the IP address of the alternate DNS server. Enable DHCP Relay: Select this mode to specify another DHCP server's IP address. 21
  • D-Link DSA-3100P | Manual - Page 22
    Using the Configuration Utility (continued) Home > Private Network NAT and Router are the two local network port modes. Nat mode: All outbound IP addresses on the local network port will be translated to the IP address of the WAN port to proceed. Router mode: All outbound IP addresses on the local
  • D-Link DSA-3100P | Manual - Page 23
    1~1440. 10 minutes of time is the default value. Bandwidth Limitation: Limit the outbound traffic bandwidth for each session established by a Guest Account. Enable Multiple Login: General Login Schedule: Check this function to allow a single user account to log into the system multiple times
  • D-Link DSA-3100P | Manual - Page 24
    Using the Configuration Utility (continued) Home > User Manager > General Account Define the login time and duration here. 24
  • D-Link DSA-3100P | Manual - Page 25
    the Configuration Utility (continued) Home > User Manager > Guest Account Guest Account: Select Enable or Disable. Guest Account List Up to 10 guest accounts can be defined. To activate a particular Guest Account, simply enter the corresponding password in the Password column and click Apply. Guest
  • D-Link DSA-3100P | Manual - Page 26
    Address Control: When MAC address control is enabled, users connected to the Authentication Port can not login to the DSA-3100 unless they have registered their MAC Address at MAC Address Control. In other words, only 40 users will be allowed to login when this function is enabled. Please refer to
  • D-Link DSA-3100P | Manual - Page 27
    ) for the login page. WAN Fail Function: Enter a URL, if you enable this function. The DSA-3100 detects the WAN port connection by linking the URL defined here. It will pop up the alarm page when the WAN port fails to connect. Authentication Server: Supports multiple user Public LAN methods
  • D-Link DSA-3100P | Manual - Page 28
    List: A list of all local user accounts stored in the embedded database for user account management.You can add, edit, and delete users. A sample list is shown here. Delete User: Click the box next to the user name and click Delete. Add Users: Click Add User to create new accounts. The screen
  • D-Link DSA-3100P | Manual - Page 29
    it on your hard drive and then upload it to the DSA-3100. Each line of the text file can be in one of the following two formats: Please note that there must be no space or other characters between the user ID, password, the MAC address and the group number. The MAC address
  • D-Link DSA-3100P | Manual - Page 30
    > On-demand User Configuration On-demand User: When you connect the DSA-3100P (the plug and play receipt printer) to the DSA-3100's console port, you can create a database of up to 2000 on-demand users. By default, the on-demand user database is empty. While you press the DSA-3100P's button, the
  • D-Link DSA-3100P | Manual - Page 31
    D-Link). You can specify the maximum user amount which cannot exceed 2000. You can configure the receipt's header in this field. Receipt Footer You can configure the receipt's footer in this field. Printer Baud Rate You can specify the baud rate to support a specific printer The default setting
  • D-Link DSA-3100P | Manual - Page 32
    screen above and the screen below will appear showing a list of the on-demand users. You can delete users in this window. Local > Local User Group Configuration The DSA-3100 provides 5 local user groups; each group can designate a different outbound traffic bandwidth. The Logout Timer will logout
  • D-Link DSA-3100P | Manual - Page 33
    recommended that you restart the DSA-3100 after these changes if there are any online users. Home > User Manager > Authentication Server service and public LAN method function. The settings will take effect immediately after you click the Apply button. It is recommended that you restart the DSA-3100
  • D-Link DSA-3100P | Manual - Page 34
    points. By using the integrated RADIUS proxy function in the DSA-3100, users can use the EAP methods such as EAP-MD5 or EAP-TLS to login and get the service depending on the authentication methods which the backend RADIUS server and APs support. The assumption, for this scenario, is that the network
  • D-Link DSA-3100P | Manual - Page 35
    Using the Configuration Utility (continued) Home > User Manager > Authentication Server > RADIUS > 802.1x (continued) Input the IP addresses and DSA3100. Except for the idle timer, there is no way for the user to logoff from 802.1x Access Point in the current 802.1x implementation by Microsoft. 35
  • D-Link DSA-3100P | Manual - Page 36
    . It is recommended that you restart the DSA-3100 after these changes, if there are any online users. Home > User Manager > Authentication Server > External Web Server The DSA-3100 can support an external web server which enables the user to put the login page on the external web server and change
  • D-Link DSA-3100P | Manual - Page 37
    . The DSA-3100 Administrator must have a roaming user agreement with Airpath Wireless in order to use this feature. Users who registered Airpath Wireless's service may login to the local public network via roaming. Within the system default login page, users are provided with a link redirected to
  • D-Link DSA-3100P | Manual - Page 38
    . The DSA-3100 Administrator must have a roaming user agreement with Pronto Wireless in order to use this feature. Users who registered Pronto Wireless's service may login to the local public network via roaming. You can configure related function here including server IP, default group, login URL
  • D-Link DSA-3100P | Manual - Page 39
    Using the Configuration Utility (continued) Advanced > Port and IP Redirect Up to 10 sets of traffic redirection criteria can be defined through this interface. Clients who try to access a specific destination that matches one of the defined destinations will be forced to a matching redirection
  • D-Link DSA-3100P | Manual - Page 40
    servers to enable access to servers connected to the authentication and local network port from outside of the managed network. Depending on the service provided, the service might run on TCP ports, UDP ports or both. Click Enable to activate the rule. Changes to the settings of virtual servers will
  • D-Link DSA-3100P | Manual - Page 41
    ) If you have multiple IP addresses available to assign to the DSA-3100's WAN interface, you could define up to 10 pairs of Ethernet or appropriate for public viewing could be listed in the Free Surfing Area. Guest users of the network cannot access other parts of the network but could still connect
  • D-Link DSA-3100P | Manual - Page 42
    subnet mask. In the example, we use the subnet mask 255.255.255.0. Gateway IP Address: Specifies the IP address of the next hop router. In the example a static route to forward all 192.168.100.0/24 IP packets to the DSA-3100. After clicking the Apply button, you will see the added route is shown
  • D-Link DSA-3100P | Manual - Page 43
    Using the Configuration Utility (continued) Advanced > Firewall . Click the Filter Rule number to enter the firewall page for each filter. The chart on the following page explains each configurable item in detail. Edit the filter rule Filter rule is a set of fil- ters that determine whether
  • D-Link DSA-3100P | Manual - Page 44
    Using the Configuration Utility (continued) Advanced > Firewall (continued) Filter Name Check to enable this rule Action Protocol Description Gives a name to the IP Filter rule Enables this rule if it is marked Specifies the action to be taken when packets match the rule Block: Packets matching
  • D-Link DSA-3100P | Manual - Page 45
    at 1:00, 1:30, 2:00, 2:30, 3:00 etc., until the problem is fixed. Tools > Change Password The DSA-3100 provides 2 built-in user accounts: Admin: This user is the administrator of the DSA-3100. Manager: This user has the right to manage a user account, the admin functions are denied. The Admin and
  • D-Link DSA-3100P | Manual - Page 46
    key page in order to support a specific certificate, please click Browse to search for the file name for the customer certificate. Click Apply to upload it onto the DSA-3100. If you want to get back to the default certificate page, simply click the Use Default Certificate button. continued on the
  • D-Link DSA-3100P | Manual - Page 47
    specify the file name to upload onto the DSA-3100. If you want to get back to the default user login page, simply click the Use Default Page button. If you want to display the Login page, simply click the Preview button The uploaded custom login page must contain the following HTML codes to provide
  • D-Link DSA-3100P | Manual - Page 48
    logout page, please click Browse to specify the file name and upload it onto the DSA-3100 by clicking Apply. If you want to get back to the default user logout page, simply click the Use Default Page button. If you want to display the Logout page, simply click the Preview button. The uploaded custom
  • D-Link DSA-3100P | Manual - Page 49
    Page: To provide a Tools > Upload custom error page, please specify the file name to upload it onto the DSA-3100. If you want to get back to the default user login page, simply click the Use Default Page button. If you want to display the Error Page, simply click the Preview button. Tools > Upload
  • D-Link DSA-3100P | Manual - Page 50
    (continued) Tools > Upload Radius Login Succeed Page Upload Radius Login Succeed Page: To provide a Radius user "login ok" page, please specify the file name to upload it onto the DSA-3100. If you want to get back to the default user login page, simply click the Use Default Page button. If you want
  • D-Link DSA-3100P | Manual - Page 51
    be created by the DSA-3100.) Reset To Factory Default: Click Reset to restore the DSA-3100 back to the factory default settings. Please click the link in the configuration screen shown here to check for firmware upgrades on the D-Link website. After you download the new firmware file to your hard
  • D-Link DSA-3100P | Manual - Page 52
    the management station. • Community: Community strings serve as passwords for SNMP messages, DSA-3100 allows Read-only (RO) access. If you select effective immediately after you click Apply. DoS protection for user: The DSA-3100 protects users against various hacker attacks including NMAP FIN/ URG/
  • D-Link DSA-3100P | Manual - Page 53
    (continued) Tools > Restart Reboots the DSA-3100. It takes about 75 seconds for the DSA-3100 to reboot. If you have to turn off the power of the DSA-3100 for some time, please reboot it, and after you hear a beep, remove the power adapter. Note: On-line user sessions will be terminated when the
  • D-Link DSA-3100P | Manual - Page 54
    Version System Name Admin Detail Succeed Page External Syslog Server Displays the current firmware version System name; DSA-3100 is the default Information about the admin The URL that appears after a successful user login-usually a corporation's homepage Shows the IP address and the Port of the
  • D-Link DSA-3100P | Manual - Page 55
    Using the Configuration Utility (continued) With this feature, you can get Interface management information about the WAN port, Authentication port, and Local Network port. For more detail see the following page: Status > Interface 52
  • D-Link DSA-3100P | Manual - Page 56
    Using the Configuration Utility (continued) Status > Interface (continued) 53
  • D-Link DSA-3100P | Manual - Page 57
    user to get off-line by clicking the log out link beside a user's data. Status > Traffic History History E-mail S The DSA-3100 authentication methods, Plain, Login, CRAM-MD5 and Password and Domain. Access History IP Specify an IP address that allows the billing system to connect to the DSA-3100
  • D-Link DSA-3100P | Manual - Page 58
    Using the Configuration Utility (continued) Help This feature provides online instructions for operating the DSA-3100, you can click the hyperlink for a more detailed description. 55
  • D-Link DSA-3100P | Manual - Page 59
    Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about
  • D-Link DSA-3100P | Manual - Page 60
    Networking Basics (continued) Please follow all the instructions in this window: Click Next In the following window, select the best description of your computer. If your computer connects to the internet through a gateway/router, select the second option as shown. Click Next 57
  • D-Link DSA-3100P | Manual - Page 61
    Networking Basics (continued) Enter a Computer description and a Computer name (optional.) Click Next Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next 58
  • D-Link DSA-3100P | Manual - Page 62
    Networking Basics (continued) Please wait while the Network Setup Wizard applies the changes. When the changes are complete, Click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes. 59
  • D-Link DSA-3100P | Manual - Page 63
    Networking Basics (continued) In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A.
  • D-Link DSA-3100P | Manual - Page 64
    Networking Basics (continued) Please read the information under Here's how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. Click Next. 61
  • D-Link DSA-3100P | Manual - Page 65
    Networking Basics (continued) Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to
  • D-Link DSA-3100P | Manual - Page 66
    Networking Basics (continued) Naming your Computer To name your computer In Windows XP, please follow these directions: Click Start (in the lower left corner of the screen) Right-click on My Computer Select Properties Select the Computer Name Tab in the System Properties window. You may enter a
  • D-Link DSA-3100P | Manual - Page 67
    computers in your network must be in the same IP Address range (see Getting Started in this manual for a definition of IP Address Range.) To check on the IP Address of the adapter, please do the following: Right-click on the Local Area Connection icon in the task bar Click on Status
  • D-Link DSA-3100P | Manual - Page 68
    the Support tab Click Close Assigning a Static IP Address in Windows XP/2000 Note: Residential Gateways/ Gateway/Router you will not need to assign Static IP Addresses. If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these instructions
  • D-Link DSA-3100P | Manual - Page 69
    Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000 (continued) Double-click on Network Connections Right-click on Local Area Connections Click on Properties 66
  • D-Link DSA-3100P | Manual - Page 70
    the computers on the network.) Input your DNS server addresses. (Note: If you are entering a DNS server, you must enter the IP Address of the Default Gateway.) The DNS server information will be supplied by your ISP (Internet Service Provider.) Click OK 67
  • D-Link DSA-3100P | Manual - Page 71
    Macintosh OSX Go to the Apple Menu and select System Preferences cClick on Network Select Built-in Ethernet in the Show pull-down menu Select Manually in the Configure pull-down menu Input the Static IP Address, the Subnet Mask and the Router IP Address in the appropriate fields Click Apply
  • D-Link DSA-3100P | Manual - Page 72
    Networking Basics (continued) Selecting a Dynamic IP Address with Macintosh OSX Go to the Apple Menu and select System Preferences Click on Network Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pull-down menu Click Apply Now The IP Address, Subnet mask, and
  • D-Link DSA-3100P | Manual - Page 73
    Networking Basics (continued) Checking the Wireless Connection by Pinging in Windows XP/2000 Note: The following illustrations are examples only. The IP Address that you are pinging may be different from those in the following examples. Go to Start > Run > type cmd. A window similar to this one will
  • D-Link DSA-3100P | Manual - Page 74
    Manages up to 250 user account data with internal user account database Supports up to 50 on-line users ID/Password based authentication and authorization interface and user authentication interface Customizable user login, logout web interface Customizable target URL for users who successfullly
  • D-Link DSA-3100P | Manual - Page 75
    Ethernet connects to workstations & devices that need authentication Console port: RS-232 (default set to 115200, n, 8, 1, no flow control) Power Supply External Power Adapter Power Input DC 5V/3A Dimensions 45 mm (H) x 163 mm (D) x 215 mm (W) Operating Temperature 0° - 50°C Storage Temperature -25
  • D-Link DSA-3100P | Manual - Page 76
    the Telephone: (877) 453-5465 6:00AM to 6:00PM PST, Monday through Friday D-Link Technical Support over the Internet: http://support.dlink.com email:[email protected] Tech Support for customers within Canada: D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 7:30am to 12
  • D-Link DSA-3100P | Manual - Page 77
    excluding power supplies and fans) One (1) Year • Power Supplies and Fans One (1) Year • Spare parts and spare kits Ninety (90) days D-Link's sole to refund at D-Link's sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement
  • D-Link DSA-3100P | Manual - Page 78
    covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link; Products that have been
  • D-Link DSA-3100P | Manual - Page 79
    as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated and used in accordance with the instructions, may cause harmful interference to turning the equipment off and on, the user is encouraged to try to correct the interference
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
Manual
Building Networks for People
Public/Private Gateway
D-Link Airspot
DSA-3100
M
arch
200
6
Rev. B