D-Link DIR-882 User Manual

D-Link DIR-882 Manual

Get D-Link DIR-882 PDF manuals and user guides View all D-Link DIR-882 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR-882 manual content summary:

  • D-Link DIR-882 | User Manual - Page 1
    Version 1.01| 2018/10/19 User Manual AC2600 MU-MIMO Wi-Fi Gigabit Router DIR-882
  • D-Link DIR-882 | User Manual - Page 2
    other countries. App StoreSM is a service mark of Apple Inc. Chrome™ browser mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 4.87 watts Switched Off: 0.06 watts D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 3
    Hardware Setup 11 Completing Setup 14 D-Link Wi-Fi App 15 Setup Wizard 17 Configuration 22 Home 23 Internet 23 DIR-882 24 VPN 72 Management 74 Time & Schedule 74 Time 74 Schedule 75 System Log 76 System Admin 78 System 79 User 80 Upgrade 82 Statistics 83 D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 4
    WPS 120 Windows Vista 124 WPA/WPA2 125 Troubleshooting 127 Wireless Basics 131 What is Wireless 132 Tips 134 Wireless Modes 135 Networking Basics 136 Check your IP address 136 Statically Assign an IP address 137 D-Link DIR-882 User Manual Wireless Security 138 What is WPA 138 Technical
  • D-Link DIR-882 | User Manual - Page 5
    above items are missing or damaged, please contact your local reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-882 will cause damage and void the warranty for this product. D-Link DIR-882 User Manual 1
  • D-Link DIR-882 | User Manual - Page 6
    latest version. • iPhone®/iPad®, Android™, or Windows smartphone or tablet. (Please refer to the mobile app's store page to check whether your device is compatible) D-Link DIR-882 User Manual 2
  • D-Link DIR-882 | User Manual - Page 7
    , such as logins, passwords, and credit card numbers. When traveling, Quick VPN lets you watch sports and use video streaming services without experiencing blackouts or filtering. You can surf the whole Internet unfiltered and unblocked, just as you would at home. D-Link DIR-882 User Manual 3
  • D-Link DIR-882 | User Manual - Page 8
    throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. D-Link DIR-882 User Manual 4
  • D-Link DIR-882 | User Manual - Page 9
    DIR-882 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-882 can access corporate networks through encrypted channels. • User-friendly Setup Wizard - Through its easy-to-use web-based user interface or the D-Link Wi-Fi App, the DIR
  • D-Link DIR-882 | User Manual - Page 10
    enabled. 5 Super Speed USB LED A solid green light indicates a USB storage device is connected to the USB 3.0 port on the front of the router. 6 USB LED A solid green light indicates a USB storage device is connected to the USB 2.0 port on the back of the router. D-Link DIR-882 User Manual 6
  • D-Link DIR-882 | User Manual - Page 11
    connect your broadband modem to this port. 4 Reset Button Insert a paperclip in the hole, wait for 10 seconds, and release to reset the router to default settings. 5 WPS Button Press to start the Power Button Press the power button to power the device on or off. D-Link DIR-882 User Manual 7
  • D-Link DIR-882 | User Manual - Page 12
    Section 1 - Product Overview Front Panel 1 1 USB 3.0 Port Connect a USB storage device to share files over the network. D-Link DIR-882 User Manual 8
  • D-Link DIR-882 | User Manual - Page 13
    of your existing setup before making any changes. • If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump, or EnterNet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-882 User Manual 9
  • D-Link DIR-882 | User Manual - Page 14
    range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum each wall or ceiling can reduce your adapter's range from 3- base transmits a signal even if the phone is not in use. D-Link DIR-882 User Manual 10
  • D-Link DIR-882 | User Manual - Page 15
    . Place it in an open area for better wireless coverage. DIR-882 Modem 3. Turn off and unplug the power and Ethernet cable to your cable or DSL broadband modem. This is required. In some cases, you may need to turn it off for up to five minutes. DIR-882 Modem D-Link DIR-882 User Manual 11
  • D-Link DIR-882 | User Manual - Page 16
    proceeding onward. DIR-882 Modem 6. Connect the supplied power adapter to the router and a power outlet, press the power button, and wait approximately one minute until the LED indicator on the front of the device changes from orange to solid white. DIR-882 Modem D-Link DIR-882 User Manual 12
  • D-Link DIR-882 | User Manual - Page 17
    . DIR-882 Modem 8. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web browser and connecting to a website. If the website does not load, proceed to Completing Setup on page 14. D-Link DIR-882 User Manual 13
  • D-Link DIR-882 | User Manual - Page 18
    D-Link Wi-Fi App on page 15. • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to Setup Wizard on page 17. • Manual Setup - Log in to the router and manually configure your router. Refer to Configuration on page 22. D-Link DIR-882 User Manual 14
  • D-Link DIR-882 | User Manual - Page 19
    directly. Step 2 Launch the D-Link Wi-Fi App from the Home screen of your device. Step 3 Click on the Install New Device button at the middle of the screen (or click on the Menu button on the top left corner of the app to do the same). D-Link Wi-Fi D-Link DIR-882 User Manual 15
  • D-Link DIR-882 | User Manual - Page 20
    to Router and select DIR-882 from the list of available devices. Click Next to continue. Step 6 You will now be guided through a step-by-step process for setting up your device. Simply follow the on-screen instructions to complete the installation and DIR-882 configuration process. D-Link DIR-882
  • D-Link DIR-882 | User Manual - Page 21
    and password. If the router does not detect a valid Internet connection, a list of connection types to choose from will be displayed. Select your Internet connection type (this information can be obtained from your Internet Service Provider) and click Next to continue. D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 22
    continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. D-Link DIR-882 User Manual 18
  • D-Link DIR-882 | User Manual - Page 23
    configure 2.4 GHz and 5 GHz networks, refer to Wireless on page 54. In order to secure the router, please enter a new password. You will be prompted for this password every time you want to use the router's web configuration utility. Click Next to continue. D-Link DIR-882 User Manual 19
  • D-Link DIR-882 | User Manual - Page 24
    Next to continue. DIR-882 Keeping your DIR-882 firmware up to date provides you with the latest protection and new features over the air. Choose whether to keep your device up to date automatically or to manage the device updates by yourself. Click Next to continue. D-Link DIR-882 User Manual 20
  • D-Link DIR-882 | User Manual - Page 25
    Installation Setup Wizard (continued) You will be presented with a summary of your settings. Click Next to finalize the settings or Back to make changes. DIR-882 882test Click OK to close the Setup Wizard. Congratulations, your device has been successfully configured! D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 26
    The router's home page will open displaying its current connection status. The bar at the top of the page has quick access to Settings and Management functions. You may quickly jump back Home at any time. Note: The system will automatically log out after a period of inactivity. D-Link DIR-882 User
  • D-Link DIR-882 | User Manual - Page 27
    Home page displays whether or not the router is currently connected to the Internet. If it is disconnected, click Click to repair to bring up the setup wizard, refer to Setup Wizard on page 17 for more reconfigure the Internet settings, refer to Internet on page 27. D-Link DIR-882 User Manual 23
  • D-Link DIR-882 | User Manual - Page 28
    Configuration DIR-882 Click on the DIR-882 icon to view details about the router and its wireless settings. Here you can see the router's current Wi-Fi network name and password, as well as the router's MAC appears. Refer to Wireless on page 54 for more information. D-Link DIR-882 User Manual 24
  • D-Link DIR-882 | User Manual - Page 29
    current IP address of this client. Reserve IP: Enable to reserve this IP address for this client. IP Address Specify an IP address for the DIR-882's DHCP server to assign. (Reserved): Parental Control: Allow or Block access to the router. Click Save when you are done. D-Link DIR-882 User Manual 25
  • D-Link DIR-882 | User Manual - Page 30
    (at the top of the page) and then USB Sharing on the menu that appears. Refer to USB Sharing on page 67 for more information. D-Link DIR-882 User Manual 26
  • D-Link DIR-882 | User Manual - Page 31
    of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you start the router for the first time. Refer to Setup Wizard on page 17 for details. Internet 36. To configure an IPv6 connection, click the IPv6 link. Refer to page 37. D-Link DIR-882 User Manual 27
  • D-Link DIR-882 | User Manual - Page 32
    Internet Service default MAC address is set to the Internet port's physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 33
    . MAC Address The default MAC address is set to the Internet port's physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-882 User Manual 29
  • D-Link DIR-882 | User Manual - Page 34
    Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On Demand, or Manual. Maximum Idle Enter a maximum idle time for optimal performance with your ISP. The recommended setting is Auto. D-Link DIR-882 User Manual 30
  • D-Link DIR-882 | User Manual - Page 35
    . MAC Address The default MAC address is set to the Internet port's physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-882 User Manual 31
  • D-Link DIR-882 | User Manual - Page 36
    if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password. PPTP Server IP ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum . D-Link DIR-882 User Manual 32
  • D-Link DIR-882 | User Manual - Page 37
    Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. Click Save when you are done. D-Link DIR-882 User Manual 33
  • D-Link DIR-882 | User Manual - Page 38
    if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide you with a username and password. L2TP Server: your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum . D-Link DIR-882 User Manual 34
  • D-Link DIR-882 | User Manual - Page 39
    Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. Click Save when you are done. D-Link DIR-882 User Manual 35
  • D-Link DIR-882 | User Manual - Page 40
    the router allocate the AFTR Configuration: IPv6 address automatically. Select Manual Configuration to enter the AFTR IPv6 address manually. DS WAN Default Once connected, the IPv6 WAN default gateway address will be Gateway: displayed here. Click Save when you are done. D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 41
    Section 4 - Configuration IPv6 To configure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4. My Internet Choose your IPv6 connection type from the to page 45. For 6rd refer to page 49. For Local Connectivity Only refer to page 51. D-Link DIR-882 User Manual 37
  • D-Link DIR-882 | User Manual - Page 42
    the router's LAN link-local address. Local Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 43
    Assignment feature. IPv6 Address Assignment: Enable Automatic Enable or disable DHCP-PD for other IPv6 routers connected to the DHCP-PD in LAN: LAN interface. Note: This feature requires a smaller server's IPv6 assignment. Range (End): Click Save when you are done. D-Link DIR-882 User Manual 39
  • D-Link DIR-882 | User Manual - Page 44
    by your Internet Service Provider (ISP). Use Link-Local Enable or disable link-local address use. Address: Default Gateway: Enter the default gateway for your ) IPv6 address for the router. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: D-Link DIR-882 User Manual 40
  • D-Link DIR-882 | User Manual - Page 45
    you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type: Router Enter the router advertisement lifetime (in minutes). Advertisement Lifetime: If you selected Stateful DHCPv6 (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-882 User Manual 41
  • D-Link DIR-882 | User Manual - Page 46
    the router's LAN link-local address. Local Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 47
    is enabled in LAN IPv6 Address Settings: Enable Automatic Enable or disable DHCP-PD for other IPv6 routers connected to the DHCP-PD in LAN: LAN interface. Note: This feature requires a smaller subnet IPv6 address for the DHCP server's IPv6 assignment. Range (End): D-Link DIR-882 User Manual 43
  • D-Link DIR-882 | User Manual - Page 48
    Settings and SLAAC+Stateless DHCP or SLAAC+RDNSS is chosen as the Autoconfiguration Type: Router Enter the router advertisement lifetime (in minutes). Advertisement Lifetime: If DHCP-PD is disabled in (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-882 User Manual 44
  • D-Link DIR-882 | User Manual - Page 49
    your ISP. Address Mode: Select either Dynamic IP or Static IP. Service Name: Enter the ISP service name (optional). Reconnect Mode Select either Always On or Manual. MTU Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. D-Link DIR-882 User Manual 45
  • D-Link DIR-882 | User Manual - Page 50
    DNS server address. Server: LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. This option is only available if you selected Dynamic IP for address mode. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: D-Link DIR-882 User Manual 46
  • D-Link DIR-882 | User Manual - Page 51
    static address mode is selected, enter the LAN (local) IPv6 address for the router. LAN IPv6 Link- Displays the router's LAN link-local address. DHCP as the Autoconfiguration Type: Router Enter the router advertisement lifetime (in minutes). Advertisement Lifetime: D-Link DIR-882 User Manual 47
  • D-Link DIR-882 | User Manual - Page 52
    address for the DHCP server's IPv6 assignment. Range (End): IPv6 Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-882 User Manual 48
  • D-Link DIR-882 | User Manual - Page 53
    . Server: 6rd Manual Configuration Enable Hub and Enable this option if you want to minimize the number of routes to Spoke Mode: the destination by router's LAN IPv6 Address link-local address. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 54
    you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type: Router Enter the router advertisement lifetime (in minutes). Advertisement Lifetime: If you selected Stateful DHCPv6 (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-882 User Manual 50
  • D-Link DIR-882 | User Manual - Page 55
    prefix. Prefix: If you selected Enable ULA and disabled Default ULA Prefix: ULA Prefix: Enter your own ULA prefix. Current IPv6 ULA Settings Current ULA Displays the current ULA prefix. Prefix: LAN IPv6 ULA: Displays the LAN's IPv6 ULA. Click Save when you are done. D-Link DIR-882 User Manual 51
  • D-Link DIR-882 | User Manual - Page 56
    your Internet connection, as provided by your ISP. IPTV VLAN ID Enter the VLAN ID for your IPTV service, as provided by your ISP. VOIP VLAN ID: Enter the VLAN ID for your VoIP network, as provided ID traffic takes precedence over traffic with a low priority ID tag. D-Link DIR-882 User Manual 52
  • D-Link DIR-882 | User Manual - Page 57
    , you can select the type of connection Guest Zone: (Internet, IPTV, or Voice over IP) coming from the WAN connection to each interface on the DIR-882. Click Save when you are done. D-Link DIR-882 User Manual 53
  • D-Link DIR-882 | User Manual - Page 58
    by default due to security vulnerabilities. WPS-PBC Status: Enable or disable WPS-PBC (Push Button Configuration) fuctionality. WPS-PIN Status: Enable or disable WPS-PIN fuctionality. Refer to the next page if you wish to disable Smart Connect or click Save when you are done. D-Link DIR-882 User
  • D-Link DIR-882 | User Manual - Page 59
    Password: Create a password to use for wireless security. Advanced Settings Security Mode: Choose None or WPA/WPA2-Personal (recommended). 802.11 Mode Wi-Fi Channel: Select the desired channel. The default is Auto (recommended). Transmission Select the desired wireless Link DIR-882 User Manual 55
  • D-Link DIR-882 | User Manual - Page 60
    Wi-Fi Protected Setup (WPS). Using WPS-PIN disabled by default due to security vulnerabilities. WPS-PBC Status: Enable or disable WPS-PBC (Push Button Configuration) fuctionality. WPS-PIN Status: Enable or disable WPS-PIN fuctionality. Click Save when you are done. D-Link DIR-882 User Manual 56
  • D-Link DIR-882 | User Manual - Page 61
    characters. Password: Create a password to use for wireless security. Home Network Access Internet Access Enabling this option will confine connectivity to the Internet, Only: preventing guests from accessing other local network devices. Click Save when you are done. D-Link DIR-882 User Manual 57
  • D-Link DIR-882 | User Manual - Page 62
    see all of the options. Network Settings LAN IP Address: Enter the IP address of the router.The default IP address is 192.168.0.1. If you change the IP address, once you click Save, you your computers. If enabled, your computers will use the router for a DNS server. D-Link DIR-882 User Manual 58
  • D-Link DIR-882 | User Manual - Page 63
    multicast traffic to pass through the router from Stream: the Internet. This is enabled by default. IPv6 Multicast Enable to allow IPv6 multicast traffic to pass through the router from Stream: the Internet. This is enabled by default. Click Save when you are done. D-Link DIR-882 User Manual 59
  • D-Link DIR-882 | User Manual - Page 64
    access to files stored Sharing on a USB device plugged into the router through a web browser. FTP Server Port Enter the port number of FTP server. Idle Time Enter the time (in minutes) before connected clients will be considered idle. Click Save when you are done. D-Link DIR-882 User Manual 60
  • D-Link DIR-882 | User Manual - Page 65
    Section 4 - Configuration Features QoS Engine This Quality of Service (QoS) Engine will allow you to prioritize particular clients over others, so that those clients receive higher bandwidth cross icon in the top right of the device card. Click Save when you are done. D-Link DIR-882 User Manual 61
  • D-Link DIR-882 | User Manual - Page 66
    Section 4 - Configuration Firewall The router's firewall protects your network from malicious attacks over the Internet. In the Features menu on Simple Enable or disable IPv6 simple security. Security: IPv6 Ingress Enable or disable IPv6 ingress filtering. Filtering: D-Link DIR-882 User Manual 62
  • D-Link DIR-882 | User Manual - Page 67
    the PPTP protocol. IPSec (VPN): Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link DIR-882 User Manual 63
  • D-Link DIR-882 | User Manual - Page 68
    create your own schedules in the Schedules section. Refer to Refer to Schedule on page 75 for more information. Click Save when you are done. D-Link DIR-882 User Manual 64
  • D-Link DIR-882 | User Manual - Page 69
    . This might be necessary for certain applications to connect through the router. In the Features menu on the bar on the top of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu. TCP Link DIR-882 User Manual 65
  • D-Link DIR-882 | User Manual - Page 70
    you to specify a single public port on your router for redirection to an internal LAN IP address and of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu. Protocol: Select D-Link DIR-882 User Manual 66
  • D-Link DIR-882 | User Manual - Page 71
    trash can icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain. Click Save when you are done. D-Link DIR-882 User Manual 67
  • D-Link DIR-882 | User Manual - Page 72
    15. This value indicates the cost of using this route. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Save when you are done. D-Link DIR-882 User Manual 68
  • D-Link DIR-882 | User Manual - Page 73
    Name: Enter a name for the rule. DestNetwork: This is the IP address of the router used to reach the specified destination. PrefixLen: Enter the IPv6 address prefix length of the to transit out of the router when this route is used. Click Save when you are done. D-Link DIR-882 User Manual 69
  • D-Link DIR-882 | User Manual - Page 74
    your dynamic DNS username. Password: Enter your dynamic DNS password. Time Out: Enter a time out time (in hours). Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to IPv6 Host on page 71. D-Link DIR-882 User Manual 70
  • D-Link DIR-882 | User Manual - Page 75
    options will appear: Host Name: Enter the host name that you registered with your dynamic DNS service provider. IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Save when you are done. D-Link DIR-882 User Manual 71
  • D-Link DIR-882 | User Manual - Page 76
    Quick VPN setup. If your router is VPN server. If Quick VPN is enabled, the following options are available: Username: Enter a username between 1 and 20 characters. Password Enter a username between 1 and 20 characters. PSK Enter a passkey between 6 and 64 characters. D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 77
    Autoconfiguration Settings Authentication Choose the authentication protocol type: MSCHAPv2, PAP, or CHAP. Protocol: MSCHAPv2 is the default. MPPE: Select the encryption cipher strength: None, RC4-40, or RC4-128. RC4-128 is the default. Click Save when you are done. D-Link DIR-882 User Manual 73
  • D-Link DIR-882 | User Manual - Page 78
    to either use the D-Link NTP Server Server: to synchronize the time and date for your router, or choose Manual to set the NTP server's IP address. Click Save when you are done. To configure and manage your schedules, click Schedule and refer to Schedule on page 75. D-Link DIR-882 User Manual 74
  • D-Link DIR-882 | User Manual - Page 79
    Section 4 - Configuration Schedule Some router functions can be controlled through a pre-configured schedule. To create, edit, or delete schedules, from the Time page . To remove a time period from the schedule, click on the cross icon. Click Save when you are done. D-Link DIR-882 User Manual 75
  • D-Link DIR-882 | User Manual - Page 80
    a text file containing the system log. SysLog Settings Enable Logging to Check this box to send the router logs to a SysLog Server. Syslog Server: If Logging to the Syslog Server is Enabled: Syslog Server sent to. SMTP Server Enter your SMTP server address. Address: D-Link DIR-882 User Manual 76
  • D-Link DIR-882 | User Manual - Page 81
    Name: Enter your SMTP account name. Password: Enter your SMTP account's password E-mail Log When Full or On Schedule Send When Log If enabled, this option will set the router to send the log when it is on page 75 for more information. Click Save when you are done. D-Link DIR-882 User Manual 77
  • D-Link DIR-882 | User Manual - Page 82
    the DIR-882 is used in the URL. Example: Port: https://x.x.x.x:8081 wherex.x.x.xistheInternetIPaddressoftheDIR-882 and 8081 is the port used for the web management interface. LED Control: Turn on or off to configure the LED status lights. Click Save when you are done. D-Link DIR-882 User Manual 78
  • D-Link DIR-882 | User Manual - Page 83
    : Auto Reboot: You may set the DIR-882 to automatically reboot at a set time.The options are Never, Daily, Weekly. You may set the hour using a 24 hour format, the minute, and the day you wish to have the DIR-882 automatically reboot. Click Save when you are done. D-Link DIR-882 User Manual 79
  • D-Link DIR-882 | User Manual - Page 84
    manage, and delete user accounts with user-defined access to certain router services. In the Management menu on the bar on the top of User Name: Enter a username for the new user account. Password: Enter a password for the new user account. SAMBA Status: Enable or disable Link DIR-882 User Manual 80
  • D-Link DIR-882 | User Manual - Page 85
    : If FTP is enabled, choose to assign either Read Only or Read/Write permission. Folder: Click Browse to select the folder you want to share. VPN Status: Enable or disable Virtual Private Network (VPN) functionality for this user. Click Save when you are done. D-Link DIR-882 User Manual 81
  • D-Link DIR-882 | User Manual - Page 86
    automatically upgrade by using the drop-down menus. Upgrade Manually Upgrade If you wish to upgrade manually, first download the firmware file you wish Firmware: to upgrade to. Next, click the Upgrade Firmware button and browse to the file to install the new firmware. D-Link DIR-882 User Manual 82
  • D-Link DIR-882 | User Manual - Page 87
    Statistics On the Statistics page you can view the amount of packets that pass through the router on the WAN, LAN, and wireless segments. In the Management menu on the bar information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DIR-882 User Manual 83
  • D-Link DIR-882 | User Manual - Page 88
    as you would at home. Without Quick VPN Your Laptop Potential Hacker Stealing Data Public Unsecured Wi-Fi Hotspot With Quick VPN Internet Your Laptop Public Unsecured Wi-Fi Hotspot Internet Your Network with Quick VPN Server Unencrypted Data Encrypted Data D-Link DIR-882 User Manual 84
  • D-Link DIR-882 | User Manual - Page 89
    connecting via Quick VPN. • If your Internet connection uses DHCP, it is strongly recommended that you first set up Dynamic DNS (DDNS), such as D-Link DDNS, to eliminate the need to reconfigure client devices in the event your ISP assigns you a new WAN IP address. D-Link DIR-882 User Manual 85
  • D-Link DIR-882 | User Manual - Page 90
    file for iOS devices or Device and Mac Mac OS X. OS X: Authentication Choose the authentication protocol type: MSCHAPv2, PAP, or CHAP. Protocol: MSCHAPv2 is the default. MPPE: Select the encryption cipher strength: None, RC4-40, or RC4-128. None is the default. D-Link DIR-882 User Manual 86
  • D-Link DIR-882 | User Manual - Page 91
    Settings Authentication Choose the authentication protocol type: MSCHAPv2, PAP, or CHAP. Protocol: MSCHAPv2 is the default. MPPE: Select the encryption cipher strength: None, RC4-40, or RC4-128. None is the default. Click Save and proceed to client setup pages. D-Link DIR-882 User Manual 87
  • D-Link DIR-882 | User Manual - Page 92
    on setting up the router for Quick VPN. 1. Touch Settings on your iPhone or iPad. Scroll to and tap General. Scroll to and tap VPN. 2. Click on Add VPN Configuration... You should see a pop up window asking you to fill out the details of your VPN connection. D-Link DIR-882 User Manual 88
  • D-Link DIR-882 | User Manual - Page 93
    between multiple VPN connections. Server: Enter the IP/DDNS address of your Quick VPN server. Account: Enter the Username used to authenticate login to VPN server Password: Enter Password used to authenticate login to VPN server Secret: Enter your Passkey (PSK). D-Link DIR-882 User Manual 89
  • D-Link DIR-882 | User Manual - Page 94
    Section 5 - Quick VPN VPN Setup Instructions (Continued) 5. Click Done to save and return to the main VPN Configurations page. Your iOS device is now configured to connect to your Quick VPN server. D-Link DIR-882 User Manual 90
  • D-Link DIR-882 | User Manual - Page 95
    or Disconnect To connect or disconnect from to your Quick VPN server, open Settings and tap the button next to VPN. The VPN icon will appear in the notification area at the top of your screen indicating that your device is currently connected to the Quick VPN server. D-Link DIR-882 User Manual 91
  • D-Link DIR-882 | User Manual - Page 96
    profile. The Install Profile dialog will appear; click Continue and Install. Enter your user account password when prompted. Close the Profiles dialog.  Go to > System Preferences... > Network and select the Quick VPN connection and click Authentication Settings. D-Link DIR-882 User Manual 92
  • D-Link DIR-882 | User Manual - Page 97
    Section 5 - Quick VPN VPN Setup Instructions (Continued) Enter your Passkey in the Shared Secret text box and click OK, Apply, then OK. Your Mac is now configured to connect to your Quick VPN server. D-Link DIR-882 User Manual 93
  • D-Link DIR-882 | User Manual - Page 98
    Section 5 - Quick VPN Connect or Disconnect  To connect to or disconnect from your Quick VPN server, go to > System Preferences... > Network. Select the Quick VPN connection and click on the Connect or Disconnect button. D-Link DIR-882 User Manual 94
  • D-Link DIR-882 | User Manual - Page 99
    up a virtual private network (VPN) connection. Enter the IP/DDNS address of your Quick VPN server in the Internet address box, create a name for your connection in the Destination Name, check Don't Connect now; just set it up so I can connect later, and click Next. D-Link DIR-882 User Manual 95
  • D-Link DIR-882 | User Manual - Page 100
    your password, enter your Password and check Remember this password. Click Create to continue. Do not click Connect Now. Click Close. Click the Start button and type view network connections into the Search programs and files text box. Select View network connections. D-Link DIR-882 User Manual 96
  • D-Link DIR-882 | User Manual - Page 101
    your Passkey in the Key text box under Use preshared key for authentication. Click OK to close Advanced Properties and click OK to close Quick VPN Connection Properties. Your Windows 7 system is now configured to connect to your Quick VPN server. D-Link DIR-882 User Manual 97
  • D-Link DIR-882 | User Manual - Page 102
    Disconnect To connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notification area of the Windows taskbar and from the Dial Up and VPN section click on your Quick VPN connection and click on the Connect or Disconnect button. D-Link DIR-882 User Manual 98
  • D-Link DIR-882 | User Manual - Page 103
    Section 5 - Quick VPN Windows 8.1/8 VPN Setup Instructions This section provides Quick VPN setup instructions for Windows 8.1/8 Click the Start button and type vpn. Select Manage virtual private networks. From the Network Settings page, click Add a VPN Connection. D-Link DIR-882 User Manual 99
  • D-Link DIR-882 | User Manual - Page 104
    3 Enter your IP/DDNS address of your Quick VPN server. 4 Select User name and password from Type of sign-in info. 5 If you would like windows to remember your sign-in information, enter your User name, Password, and select Remember my sign-in info 6 Choose Save. D-Link DIR-882 User Manual 100
  • D-Link DIR-882 | User Manual - Page 105
    Section 5 - Quick VPN VPN Setup Instructions (Continued) Right-click on the Quick VPN Connection you just created and left-click on Properties. Select the Security tab. For the Type of VPN, select Layer 2 Tunneling with IPsec (L2TP/IPSec). D-Link DIR-882 User Manual 101
  • D-Link DIR-882 | User Manual - Page 106
    Setup Instructions (Continued) Click the Start button and type view network connections. Select View network connections. Right-click your Quick VPN Connection and left-click Properties. Select the Security tab. For the Type of VPN, select Layer 2 Tunneling with IPsec (L2TP/IPSec). D-Link DIR-882
  • D-Link DIR-882 | User Manual - Page 107
    your Passkey in the Key text box under Use preshared key for authentication. Click OK to close Advanced Properties and click OK to close Quick VPN Properties. Your Windows 8.1/8 system is now configured to connect to your Quick VPN server. D-Link DIR-882 User Manual 103
  • D-Link DIR-882 | User Manual - Page 108
    Section 5 - Quick VPN Connect or Disconnect To connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notification area of the Windows taskbar. Click on your Quick VPN connection and click on the Connect or Disconnect button. D-Link DIR-882 User Manual 104
  • D-Link DIR-882 | User Manual - Page 109
    Section 5 - Quick VPN Windows 10 VPN Setup Instructions This section provides Quick VPN setup instructions for Windows 10. Click Start > Settings > Network & Internet > Network and Sharing Center > VPN > Add a VPN Connection. D-Link DIR-882 User Manual 105
  • D-Link DIR-882 | User Manual - Page 110
    and password from Type of sign-in info. If you would like windows to remember your sign-in information, enter your User name, Password, and select Remember my sign-in info 7 Choose Save. Your Windows 10 system is now configured to connect to your Quick VPN server. D-Link DIR-882 User Manual 106
  • D-Link DIR-882 | User Manual - Page 111
    connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notification area of the Windows taskbar and click on your Quick VPN connection. The Network & Internet Settings page will open. Click on the Connect or Disconnect button. D-Link DIR-882 User Manual 107
  • D-Link DIR-882 | User Manual - Page 112
    Section 5 - Quick VPN Android VPN Setup Instructions This section provides Quick VPN setup instructions for Android devices. Your device's screens may vary. Go to Settings > More from the Wireless & networks > VPN > + D-Link DIR-882 User Manual 108
  • D-Link DIR-882 | User Manual - Page 113
    Enter a name for your VPN connection. 2 Select L2TP/IPSec PSK for Type. 3 Enter the IP/DDNS address of your Quick VPN server. 4 Enter your Passkey in IPSec pre-shared key field. 5 Choose Save. Your Android device is now configured to connect to your Quick VPN server. D-Link DIR-882 User Manual 109
  • D-Link DIR-882 | User Manual - Page 114
    Section 5 - Quick VPN Connect or Disconnect To connect to or disconnect from your Quick VPN server, go to Settings > More from the Wireless & networks > VPN and select the Quick VPN connection you created. D-Link DIR-882 User Manual 110
  • D-Link DIR-882 | User Manual - Page 115
    Section 5 - Quick VPN Connect or Disconnect (Continued) To connect, enter your Username and Password and select CONNECT. To disconnect, select DISCONNECT. D-Link DIR-882 User Manual 111
  • D-Link DIR-882 | User Manual - Page 116
    Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-882 router. Please refer to your user manual . D-Link DIR-882 User Manual 112
  • D-Link DIR-882 | User Manual - Page 117
    DIR-882 wirelessly for the first time, you will need to input the wireless network name (SSID) and Wi-Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi configuration card, you can find the default on the SSID. Wireless Icon D-Link DIR-882 User Manual 113
  • D-Link DIR-882 | User Manual - Page 118
    to the network. Your computer will now automatically connect to this wireless network when it is detected. You can also use Wi-Fi Protected Setup (WPS) to connect to the router. Press the WPS button on your D-Link device and you will be automatically connected. D-Link DIR-882 User Manual 114
  • D-Link DIR-882 | User Manual - Page 119
    WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To . Select the desired network by clicking on the network name. D-Link DIR-882 User Manual 115
  • D-Link DIR-882 | User Manual - Page 120
    the router, you can also press the WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 121
    WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, display any available wireless networks in your area. Wireless Icon D-Link DIR-882 User Manual 117
  • D-Link DIR-882 | User Manual - Page 122
    get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-882 User Manual 118
  • D-Link DIR-882 | User Manual - Page 123
    by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-882 User Manual 119
  • D-Link DIR-882 | User Manual - Page 124
    Wireless Client WPS The WPS feature of the DIR-882 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-882 User Manual 120
  • D-Link DIR-882 | User Manual - Page 125
    Section 6- Connecting a Wireless Client 3. Double-click the DIR-882. DIR-882 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router's Web UI) and click Next. D-Link DIR-882 User Manual 121
  • D-Link DIR-882 | User Manual - Page 126
    Section 6- Connecting a Wireless Client 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-882 User Manual 122
  • D-Link DIR-882 | User Manual - Page 127
    The following window informs you that WPS on the DIR-882 has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-882 User Manual 123
  • D-Link DIR-882 | User Manual - Page 128
    utility. If you are using another company's wireless utility, please refer to the user manual of your wireless adapter for help connecting to a wireless network. Most wireless utilities will to the Networking Basics section in this manual for more information. D-Link DIR-882 User Manual 124
  • D-Link DIR-882 | User Manual - Page 129
    WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-882 User Manual 125
  • D-Link DIR-882 | User Manual - Page 130
    -Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-882 User
  • D-Link DIR-882 | User Manual - Page 131
    Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-882. Read the following descriptions if you are having problems. software for more information on disabling or configuring it. D-Link DIR-882 User Manual 127
  • D-Link DIR-882 | User Manual - Page 132
    powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, leave the password box empty. D-Link DIR-882 User Manual 128
  • D-Link DIR-882 | User Manual - Page 133
    Section 7 - Troubleshooting 3. Why can't I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-882 User Manual 129
  • D-Link DIR-882 | User Manual - Page 134
    Click on Setup and then click Manual Configure. • To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-882 User Manual 130
  • D-Link DIR-882 | User Manual - Page 135
    cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DIR-882 User Manual 131
  • D-Link DIR-882 | User Manual - Page 136
    winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-882 User Manual 132
  • D-Link DIR-882 | User Manual - Page 137
    in recent years that almost everyone is using it, whether it's for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits • Gives everyone at home broadband access • Surf printer with multiple computers • No need to dedicate office space D-Link DIR-882 User Manual 133
  • D-Link DIR-882 | User Manual - Page 138
    quite a task not knowing where to start. That's why we've put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips feature on the router. Refer to the product manual for detail information on how to set it up. D-Link DIR-882 User Manual 134
  • D-Link DIR-882 | User Manual - Page 139
    an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-hoc network contains only clients, such as laptops with wireless USB adapters. All the adapters must be in Ad-hoc mode to communicate. D-Link DIR-882 User Manual 135
  • D-Link DIR-882 | User Manual - Page 140
    the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-882 User Manual 136
  • D-Link DIR-882 | User Manual - Page 141
    Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-882
  • D-Link DIR-882 | User Manual - Page 142
    on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-882 User Manual 138
  • D-Link DIR-882 | User Manual - Page 143
    WPS) • Wi-Fi Multimedia (WMM) Security • WPA/WPA2 (Wi-Fi Protected Access) - Personal • Wi-Fi Protected Setup (WPS) PIN/PBC Dimensions & Weight • L x W x H: 258.8 x 184.1 x 45.5 mm (10 . 3 The DIR-882 does not include 5.25-5.35 GHz & 5.47-5.725 GHz in some regions. D-Link DIR-882 User Manual 139
  • D-Link DIR-882 | User Manual - Page 144
    radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that marketed in the USA must be fixed to USA operational channels only. D-Link DIR-882 User Manual 140
  • D-Link DIR-882 | User Manual - Page 145
    pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. D-Link DIR-882 User Manual 141
  • D-Link DIR-882 | User Manual - Page 146
    non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 44 cm de distance entre la source de rayonnement et votre corps. D-Link DIR-882 User Manual 142
  • D-Link DIR-882 | User Manual - Page 147
    . Output Power (EIRP) Max. Output Power Consommation d'énergie max. Potencia máxima de Salida Potenza max. Output Max. Output Power 200 mW 200 mW 1 W 100 mW D-Link DIR-882 User Manual 143
  • D-Link DIR-882 | User Manual - Page 148
    dichiara che questo prodotto, i relativi accessori e il software sono conformi alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE e il firmware del prodotto sono disponibili per il download dalla pagina del prodotto su www.dlink.com. D-Link DIR-882 User Manual 144
  • D-Link DIR-882 | User Manual - Page 149
    www.dlink.com. Svenska[Swedish] D-Link Corporation försäkrar härmed att denna produkt, tillbehör och programvara överensstämmer med direktiv 2014/53/EU. Hela texten med EU-försäkran om överensstämmelse och produkt-firmware kan hämtas från produktsidan på www.dlink.com. D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 150
    er i samsvar med direktivet 2014/53/EU. Den fullstendige teksten i EU-erklæring om samsvar og produktets fastvare er tilgjengelig for nedlasting fra produktsiden på www.dlink.com. Warning Statement: The power outlet should be near the device and easily accessible. D-Link DIR-882 User Manual 146
  • D-Link DIR-882 | User Manual - Page 151
    in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication between two client devices without an Access Point. • Access points will support DFS (Dynamic Frequency nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link DIR-882 User Manual 147
  • D-Link DIR-882 | User Manual - Page 152
    mode Ad-hoc lorsqu'il fonctionne dans la bande de 5 GHz. Le mode l'UE. • Merci de vous référer au guide d'utilisation ou de la fiche technique afin de manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 153
    zal worden. • Dit toestel kan niet functioneren in Ad-hoc mode wanneer het gebruikt wordt in 5 GHz. Ad-hoc mode is directe peer-to-peer communicatie tussen twee klantenapparaten zonder een om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link DIR-882 User Manual 149
  • D-Link DIR-882 | User Manual - Page 154
    Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read and follow the instructions in the user manual. • Do not und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link DIR-882 User Manual 150
  • D-Link DIR-882 | User Manual - Page 155
    nunca. Para algunos productos con batería reemplazable por el usuario, lea y siga las instrucciones del manual de usuario. • No derrame comida o líquidos sobre el producto y nunca deje que caigan objetos red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link DIR-882 User Manual 151
  • D-Link DIR-882 | User Manual - Page 156
    alcuni prodotti dotati di batteria sostituibile dall'utente, leggere e seguire le istruzioni riportate nel manuale dell'utente. • Non versare cibi o liquidi sul prodotto e non spingere mai alcun voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DIR-882 User Manual 152
  • D-Link DIR-882 | User Manual - Page 157
    this manner you help to conserve the environment and protect human health. D-Link and the Environment At D-Link, we understand and are committed to reducing any impact our operations and products Sie entsprechende Informationen im Internet unter www.dlinkgreen.com. D-Link DIR-882 User Manual 153
  • D-Link DIR-882 | User Manual - Page 158
    apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir las emisiones de CO2. Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio www.dlinkgreen.com. D-Link DIR-882 User Manual 154
  • D-Link DIR-882 | User Manual - Page 159
    D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies. Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen. D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 160
    . Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit energii a snížit emise CO2. Více informací o našich ekologických výrobcích a obalech najdete na adrese www.dlinkgreen.com. D-Link DIR-882 User Manual 156
  • D-Link DIR-882 | User Manual - Page 161
    Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp. For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til www.dlinkgreen.com. D-Link DIR-882 User Manual
  • D-Link DIR-882 | User Manual - Page 162
    D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin autat säästämään energiaa ja vähentämään hiilidioksiidipäästöjä. Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com. D-Link DIR-882 User Manual 158
  • D-Link DIR-882 | User Manual - Page 163
    que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar energia e reduzir as emissões de CO2. Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite www.dlinkgreen.com. D-Link DIR-882 User Manual 159
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
Version 1.01| 2018/10/19
User Manual
DIR-882
AC2600 MU-MIMO Wi-Fi Gigabit Router