D-Link DIR-822 User Manual

D-Link DIR-822 Manual

Get D-Link DIR-822 PDF manuals and user guides View all D-Link DIR-822 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR-822 manual content summary:

  • D-Link DIR-822 | User Manual - Page 1
    Version 3.00 | 12/9/2015 User Manual AC1200 Wi-Fi Router DIR-822
  • D-Link DIR-822 | User Manual - Page 2
    and other countries. App StoreSM is a service mark of Apple Inc. Chrome™ browser mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 2.8 watts Switched Off: 0.08 watts D-Link DIR-822 User Manual
  • D-Link DIR-822 | User Manual - Page 3
    Filter 58 Static Routes 59 IPv6 60 Dynamic DNS 61 IPv6 Host 62 Management 63 Time & Schedule 63 Time 63 Schedule 64 System Log 65 Admin 66 System 67 Upgrade 68 Statistics 69 Connect a Wireless Client to your Router 70 WPS Button 70 D-Link DIR-822 User Manual ii
  • D-Link DIR-822 | User Manual - Page 4
    Wireless 91 Tips...93 Wireless Modes 94 Networking Basics 95 Check your IP address 95 Statically Assign an IP address 96 Wireless Security 97 What is WPA 97 Technical Specifications 98 Safety Statements 99 Contacting Technical Support 105 Registration 106 D-Link DIR-822 User Manual iii
  • D-Link DIR-822 | User Manual - Page 5
    DIR-822 AC1200 Wi-Fi Router Ethernet Cable Power Adapter Wi-Fi Configuration Note WI-FI Configuration Note If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-822
  • D-Link DIR-822 | User Manual - Page 6
    higher • Safari 5.1 or higher • Chrome 25 or higher Windows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. • iPhone®/iPad®/iPod Touch® (iOS 6.0 or higher) • Android™ device (2.33 or higher) D-Link DIR-822 User Manual 2
  • D-Link DIR-822 | User Manual - Page 7
    . Support for WPA™ and WPA2™ standards ensure that you will be able to use the best possible encryption regardless of your client devices. In addition, this router is equipped with a dual-active firewall (SPI and NAT) to prevent potential attacks over the Internet. D-Link DIR-822 User Manual 3
  • D-Link DIR-822 | User Manual - Page 8
    DIR-822 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-822 can securely access corporate networks. • User-friendly Setup Wizard . Environmental conditions will adversely affect wireless signal range. D-Link DIR-822 User Manual 4
  • D-Link DIR-822 | User Manual - Page 9
    . 4 Power Button Press the power button to power the DIR-822 on and off. 5 Reset Button Insert a paperclip in the hole on the bottom of the device and wait for several seconds to reset the router to default settings. 6 WPS Button Press to start the WPS process. D-Link DIR-822 User Manual 5
  • D-Link DIR-822 | User Manual - Page 10
    The light will blink while the device is in recovery mode. 2 Internet LED A solid light indicates that an Internet link is established. 3 WPS LED A solid light indicates that light indicates a connection to an Ethernet-enabled computer on ports 1-4 respectively. D-Link DIR-822 User Manual 6
  • D-Link DIR-822 | User Manual - Page 11
    USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your Internet Service Provider (ISP) to change connection types (USB to or you will not be able to connect to the Internet. D-Link DIR-822 User Manual 7
  • D-Link DIR-822 | User Manual - Page 12
    . A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials The base transmits a signal even if the phone is not in use. D-Link DIR-822 User Manual 8
  • D-Link DIR-822 | User Manual - Page 13
    service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web browser and connecting to a website. If the Internet LED indicator is lit, indicating a connection on the Internet/WAN port, then the router should be able to connect to the Internet. D-Link DIR-822
  • D-Link DIR-822 | User Manual - Page 14
    iPad, or iPod touch to configure your router. Refer to page 11. • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to page 16. • Manual Setup - Log into the router and manually configure your router. Refer to page 19 D-Link DIR-822 User Manual 10
  • D-Link DIR-822 | User Manual - Page 15
    SSID) as listed on the supplied info card. Select and then enter your Wi-Fi password. Step 3 Once you connect to the router, launch the QRS Mobile app from the Home screen of your device. Note: The following to that of the screenshots, but the process is the same. D-Link DIR-822 User Manual 11
  • D-Link DIR-822 | User Manual - Page 16
    password and tap Log In. Tap Next once the Operation Mode screen appears. Step 5 At this point, please ensure that you the router is connected to a modem. Plug one end of the provided Ethernet cable into your DSL or cable modem, and plug the other end into the port marked INTERNET on the DIR-822
  • D-Link DIR-822 | User Manual - Page 17
    tap Next to proceed. Step 7 Enter the administrator password of your choice. Unlike the Wi-Fi password, this password is only required when you need to configure the router. See "Configuration" on page 19 for details of when this password is used. Tap Next to proceed. D-Link DIR-822 User Manual 13
  • D-Link DIR-822 | User Manual - Page 18
    notifications whenever a new firmware update is available, check the Notify me when new firmware is available box and tap Next. Otherwise, just tap Next to proceed. Step 10 You will be presented with a summary of your chosen settings. Tap Save to complete the setup. D-Link DIR-822 User Manual 14
  • D-Link DIR-822 | User Manual - Page 19
    Section 3 - Getting Started Congratulations, your device has been successfully configured! You can share this information by tapping Share By E-mail, or tap Finish to exit the app. D-Link DIR-822 User Manual 15
  • D-Link DIR-822 | User Manual - Page 20
    your new D-Link router and connect to the Internet. Click Next to continue. Please wait while your router detects your Internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password. D-Link DIR-822 User Manual 16
  • D-Link DIR-822 | User Manual - Page 21
    Internet Service Provider) and click Next to continue. If the router detected or you selected PPPoE, enter your PPPoE username and password router. If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. D-Link DIR-822 User Manual
  • D-Link DIR-822 | User Manual - Page 22
    a new password. You will be prompted for this password every time you want to use the router's web configuration utility. Click Next to continue. At the end of the wizard, you will be presented with a final summary of your settings. Click Finish to close the wizard. D-Link DIR-822 User Manual 18
  • D-Link DIR-822 | User Manual - Page 23
    connect by typing the IP address of the router (by default this is http://192.168.0.1) in the address bar. Enter your password. If you previously followed the setup wizard, please use the admin password you entered during the wizard. Otherwise, leave the password blank. Click Log In to proceed. Note
  • D-Link DIR-822 | User Manual - Page 24
    Internet The Home page displays whether or not the router is currently connected to the Internet. If it is disconnected, click Click to repair to bring up the setup wizard (see page 16). To bring up more Renew. To reconfigure the Internet settings, refer to page 23. D-Link DIR-822 User Manual 20
  • D-Link DIR-822 | User Manual - Page 25
    Section 4 - Configuration DIR-822 Click on the DIR-822 icon to view details about the router and its wireless settings. Here you can see the router's current wireless settings, as well as its MAC address and the menu that appears. For more information refer to page 47. D-Link DIR-822 User Manual 21
  • D-Link DIR-822 | User Manual - Page 26
    device. IP Address: Enter a specific IP address for this client. Reserve IP: Enable to reserve this IP address for this client. Parental Allow or Block access to the router. Control: Click Save when you are done. D-Link DIR-822 User Manual 22
  • D-Link DIR-822 | User Manual - Page 27
    on the top of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you start the router for the first time. Refer to page 16 for details. Internet page 31.v To configure an IPv6 connection, click the IPv6 link. Refer to page 32. D-Link DIR-822 User Manual 23
  • D-Link DIR-822 | User Manual - Page 28
    Internet Service default MAC address is set to the Internet port's physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-822 User Manual
  • D-Link DIR-822 | User Manual - Page 29
    ISP. MAC Address The default MAC address is set to the Internet port's physical interface Clone: MAC address on the router. You can use drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-822 User Manual 25
  • D-Link DIR-822 | User Manual - Page 30
    MAC Address The default MAC address is set to the Internet port's physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-822 User Manual 26
  • D-Link DIR-822 | User Manual - Page 31
    Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password . Password: Enter the password provided by your ISP. Reconnect Select either Always-on, On-Demand, or Manual. Mode: Link DIR-822 User Manual 27
  • D-Link DIR-822 | User Manual - Page 32
    Section 4 - Configuration Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-822 User Manual 28
  • D-Link DIR-822 | User Manual - Page 33
    ) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide you with a username and password. L2TP Server IP your ISP. Password: Enter the password provided by your ISP. Reconnect Select either Always-on, On-Demand, or Manual. Mode: Maximum D-Link DIR-822 User Manual 29
  • D-Link DIR-822 | User Manual - Page 34
    Section 4 - Configuration Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-822 User Manual 30
  • D-Link DIR-822 | User Manual - Page 35
    router allocate the AFTR IPv6 Configuration: address automatically. Select Manual Configuration to enter the AFTR IPv6 address manually. AFTR IPv6 If you selected Manual WAN default gateway address will be Default displayed here. Gateway: Click Save when you are done. D-Link DIR-822 User Manual 31
  • D-Link DIR-822 | User Manual - Page 36
    Section 4 - Configuration IPv6 To configure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4. My Internet Choose your IPv6 connection type from refer to page 43. For 6rd refer to page 44. For Local Connectivity Only refer to page 46. D-Link DIR-822 User Manual 32
  • D-Link DIR-822 | User Manual - Page 37
    Enable or disable DHCP-PD for other IPv6 routers connected to the Automatic LAN interface. DHCP-PD in LAN: Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. D-Link DIR-822 User Manual 33
  • D-Link DIR-822 | User Manual - Page 38
    Section 4 - Configuration Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual 34
  • D-Link DIR-822 | User Manual - Page 39
    address. Server: LAN IPv6 Enter the LAN (local) IPv6 address for the router. Address: LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: Enable Check to enable the Automatic IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: D-Link DIR-822 User Manual 35
  • D-Link DIR-822 | User Manual - Page 40
    Section 4 - Configuration Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual 36
  • D-Link DIR-822 | User Manual - Page 41
    Enable or disable DHCP-PD for other IPv6 routers connected to the Automatic LAN interface. DHCP-PD in LAN: Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. D-Link DIR-822 User Manual 37
  • D-Link DIR-822 | User Manual - Page 42
    Section 4 - Configuration Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6 Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual 38
  • D-Link DIR-822 | User Manual - Page 43
    address. Enable DHCP- Enable or disable DHCP-PD for other IPv6 routers connected to the PD: LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. D-Link DIR-822 User Manual 39
  • D-Link DIR-822 | User Manual - Page 44
    allocation), such as /63. Contact your ISP for more information. Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6 Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual 40
  • D-Link DIR-822 | User Manual - Page 45
    to run in IPv4 Tunnel mode. IPv6 over IPv4 tunneling encapsulates routers connected to the PD: LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. D-Link DIR-822 User Manual
  • D-Link DIR-822 | User Manual - Page 46
    allocation), such as /63. Contact your ISP for more information. Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6 Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual 42
  • D-Link DIR-822 | User Manual - Page 47
    IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6 Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual 43
  • D-Link DIR-822 | User Manual - Page 48
    minimize the number of routes to the Spoke Mode: destination by using a hub and spoke manual configuration only). Address: LAN IPv6 Enter the LAN (local) IPv6 address for the router. Address: LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: D-Link DIR-822 User Manual
  • D-Link DIR-822 | User Manual - Page 49
    IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual 45
  • D-Link DIR-822 | User Manual - Page 50
    automatically configure the ULA prefix for ULA Prefix: the default setting. ULA Prefix: If you wish to choose your own ULA prefix, enter it here. Current IPv6 This section will display the current settings for your IPv6 ULA. ULA Settings: Click Save when you are done. D-Link DIR-822 User Manual 46
  • D-Link DIR-822 | User Manual - Page 51
    802.11n and non-802.11n wireless devices, or select 20 MHz if you are not using any 802.11n wireless clients. Visibility Status: The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. D-Link DIR-822 User Manual 47
  • D-Link DIR-822 | User Manual - Page 52
    Enable, or you can create your own schedules in the Schedules section. Refer to page 64 for more information. Click Save when you are done. D-Link DIR-822 User Manual 48
  • D-Link DIR-822 | User Manual - Page 53
    clients will need to enter this password to successfully connect to the guest zone. Internet Access Enabling this option will confine connectivity to the Internet, Only: disallowing guests from accessing other local network devices. Click Save when you are done. D-Link DIR-822 User Manual 49
  • D-Link DIR-822 | User Manual - Page 54
    IP Enter the starting and ending IP addresses for the DHCP server's IP Address Range: assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. D-Link DIR-822 User Manual 50
  • D-Link DIR-822 | User Manual - Page 55
    peripherals. WAN Port You may set the port speed of the Internet port to 10 Mbps, 100 Speed: Mbps, router from Stream: the Internet. IPv6 Multicast Enable to allow IPv6 multicast traffic to pass through the router from Stream: the Internet. Click Save when you are done. D-Link DIR-822 User Manual
  • D-Link DIR-822 | User Manual - Page 56
    those clients receive higher bandwidth. For example, if one client is streaming a movie and another is downloading a non-urgent file, you might wish to assign the former device a higher priority than the latter right of the device card. Click Save when you are done. D-Link DIR-822 User Manual 52
  • D-Link DIR-822 | User Manual - Page 57
    Section 4 - Configuration Firewall Settings The router's firewall protects your network from malicious attacks over the Internet. In the Features menu on the bar : PPTP: Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol. D-Link DIR-822 User Manual 53
  • D-Link DIR-822 | User Manual - Page 58
    support traversal of IPSec through NAT. This Application Level Gateway (ALG) may interfere with the operation of such VPN clients. If you are having trouble connecting If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link DIR-822 User Manual 54
  • D-Link DIR-822 | User Manual - Page 59
    IP Enter the destination IP address range that the rule will apply to, and Address Range: using the drop-down menu, specify whether it is a WAN or LAN IP address. Port Range: Select the protocol of the traffic more information. Click Apply when you are done. D-Link DIR-822 User Manual 55
  • D-Link DIR-822 | User Manual - Page 60
    Configuration Port Forwarding Port forwarding allows you to specify a port or range of ports to open for specific devices on the network. This might be necessary for certain applications to connect through the router. In the Features menu on the bar on the top of the page, click Port Forwarding. If
  • D-Link DIR-822 | User Manual - Page 61
    port on your router for redirection to an internal LAN IP Address and Private LAN port. To configure the virtual server, from the Port Forwarding page click Virtual Server. To return to the main Port Forwarding page, click Port Forwarding the incoming service to. Link DIR-822 User Manual 57
  • D-Link DIR-822 | User Manual - Page 62
    block, select DENY computers access to ONLY these sites from the drop-down menu. All other sites will be accessible. If you want to specify a list of sites to allow, select ALLOW computers access to ONLY these sites the URL or domain. Click Save when you are done. D-Link DIR-822 User Manual 58
  • D-Link DIR-822 | User Manual - Page 63
    1 is the lowest cost and 15 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link DIR-822 User Manual 59
  • D-Link DIR-822 | User Manual - Page 64
    Name: Enter a name for the rule. DestNetwork: This is the IP address of the router used to reach the specified destination. PrefixLen: Enter the IPv6 address prefix length of the to transit out of the router when this route is used. Click Apply when you are done. D-Link DIR-822 User Manual 60
  • D-Link DIR-822 | User Manual - Page 65
    Name: Enter your dynamic DNS username. Password: Enter your dynamic DNS password. Time Out: Enter a timeout time (in hours). Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to page 62. D-Link DIR-822 User Manual 61
  • D-Link DIR-822 | User Manual - Page 66
    will appear: Host Name: Enter the host name that you registered with your dynamic DNS service provider. IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Apply when you are done. D-Link DIR-822 User Manual 62
  • D-Link DIR-822 | User Manual - Page 67
    from the drop-down menu. To configure the router'stime and date manually, disable this option and use the drop-down menus that appear to input the time and date. Click Save when you are done. To configure and manage your schedules, click Schedule and refer to page 64. D-Link DIR-822 User Manual 63
  • D-Link DIR-822 | User Manual - Page 68
    schedule, but only one period per day. To remove a time period from the schedule, click on the cross icon. Click Apply when you are done. D-Link DIR-822 User Manual 64
  • D-Link DIR-822 | User Manual - Page 69
    settings for your email account. These are obtained from your email service provider. Send When Log If email notification is enabled, this option will set the router to send Full: the log by email when the log is 64 for more information. Click Save when you are done. D-Link DIR-822 User Manual 65
  • D-Link DIR-822 | User Manual - Page 70
    ./ in order to connect to the router. Enable Remote Remote management allows the DIR-822 to be configured from the Management: Internet by a web browser. A password is still required to access the web management interface. Remote Admin The port number used to access the DIR-822 is used in the URL
  • D-Link DIR-822 | User Manual - Page 71
    reboot the router immediately. Device: Auto Reboot: You may select Never, Daily, or Weekly. Day of the Choose the day of the week to automatically reboot the router. week: Time: Choose the time of day to automatically reboot the router. Click Save when you are done. D-Link DIR-822 User Manual 67
  • D-Link DIR-822 | User Manual - Page 72
    If you wish to upgrade manually, first download the firmware file you Firmware: wish to upgrade to. Next, click the Upgrade Firmware button and browse to the file to install the new firmware. You can also browse to a language pack file to install a new language pack. D-Link DIR-822 User Manual 68
  • D-Link DIR-822 | User Manual - Page 73
    Statistics On the Statistics page you can view the amount of packets that pass through the router on the WAN, LAN, and wireless segments. In the Management menu on the bar information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DIR-822 User Manual 69
  • D-Link DIR-822 | User Manual - Page 74
    Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-822 router. Please refer to your user manual . D-Link DIR-822 User Manual 70
  • D-Link DIR-822 | User Manual - Page 75
    WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join . Select the desired network by clicking on the network name. D-Link DIR-822 User Manual 71
  • D-Link DIR-822 | User Manual - Page 76
    the router, you can also press the WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DIR-822 User Manual
  • D-Link DIR-822 | User Manual - Page 77
    WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will display any available wireless networks in your area. Wireless Icon D-Link DIR-822 User Manual 73
  • D-Link DIR-822 | User Manual - Page 78
    you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-822 User Manual 74
  • D-Link DIR-822 | User Manual - Page 79
    by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-822 User Manual 75
  • D-Link DIR-822 | User Manual - Page 80
    Wireless Network WPS The WPS feature of the DIR-822 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-822 User Manual 76
  • D-Link DIR-822 | User Manual - Page 81
    Section 5 - Connecting to a Wireless Network 3. Double-click the DIR-822. DIR-822 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router's Web UI) and click Next. D-Link DIR-822 User Manual 77
  • D-Link DIR-822 | User Manual - Page 82
    Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-822 User Manual 78
  • D-Link DIR-822 | User Manual - Page 83
    8. The following window informs you that WPS on the router has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-822 User Manual 79
  • D-Link DIR-822 | User Manual - Page 84
    area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-822 User Manual 80
  • D-Link DIR-822 | User Manual - Page 85
    WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will -Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-822 User Manual 81
  • D-Link DIR-822 | User Manual - Page 86
    -Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-822 User
  • D-Link DIR-822 | User Manual - Page 87
    instructions are for Service Pack 2 users. If you are using another company's utility, please refer to the user manual access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-822 User Manual
  • D-Link DIR-822 | User Manual - Page 88
    to a Wireless Network WPA/WPA2 It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will Fi network (SSID) you would like to connect to and click Connect. D-Link DIR-822 User Manual 84
  • D-Link DIR-822 | User Manual - Page 89
    . Enter the WPAPSK Wi-Fi password and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. D-Link DIR-822 User Manual 85
  • D-Link DIR-822 | User Manual - Page 90
    . Software firewalls such as ZoneAlarm, BLACKICE, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-822 User Manual 86
  • D-Link DIR-822 | User Manual - Page 91
    powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, leave the password box empty. D-Link DIR-822 User Manual 87
  • D-Link DIR-822 | User Manual - Page 92
    Section 6 - Troubleshooting 3. Why can't I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-822 User Manual 88
  • D-Link DIR-822 | User Manual - Page 93
    • Click on Setup and then click Manual Configure. • To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-822 User Manual 89
  • D-Link DIR-822 | User Manual - Page 94
    cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DIR-822 User Manual 90
  • D-Link DIR-822 | User Manual - Page 95
    point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-822 User Manual
  • D-Link DIR-822 | User Manual - Page 96
    devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DIR-822 User Manual
  • D-Link DIR-822 | User Manual - Page 97
    Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. Security D-Link DIR-822 User Manual 93
  • D-Link DIR-822 | User Manual - Page 98
    an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-hoc network contains only clients, such as laptops with wireless CardBus adapters. All the adapters must be in Ad-hoc mode to communicate. D-Link DIR-822 User Manual
  • D-Link DIR-822 | User Manual - Page 99
    the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-822 User Manual 95
  • D-Link DIR-822 | User Manual - Page 100
    the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-822
  • D-Link DIR-822 | User Manual - Page 101
    on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-822 User Manual 97
  • D-Link DIR-822 | User Manual - Page 102
    condensing Wireless Frequency Range • IEEE Link Green • CSA • CCC Dimensions & Weight • 190 x 133 x 38 mm (7.48 x 5.23 x 1.49 inches) • 263.1 g (9.28 oz) Wireless Bandwidth Rate • IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps • IEEE 802.11b: 11, 5.5, 2, and 1 Mbps D-Link DIR-822 User Manual
  • D-Link DIR-822 | User Manual - Page 103
    radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that marketed in the USA must be fixed to USA operational channels only. D-Link DIR-822 User Manual 99
  • D-Link DIR-822 | User Manual - Page 104
    This device is for indoor use only when using all channels in the 5.150 to 5.250 GHz frequency range. High power radars are allocated as primary users of the 5.150 to 5.250 GHz bands. These radar with minimum distance 20 cm between the radiator and your body. D-Link DIR-822 User Manual 100
  • D-Link DIR-822 | User Manual - Page 105
    be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; (iii) pour les dispositifs munis d'antennes amovibles, utilise avec une source de courrant, modele WA-36A12R ou 2AAR006F. D-Link DIR-822 User Manual 101
  • D-Link DIR-822 | User Manual - Page 106
    the device and other equipment, observe the following precautions: Power Sources • Observe and follow service markings. • Do not push any objects into the openings of your device unless consistent with rated to operate with the power available in your location. D-Link DIR-822 User Manual 102
  • D-Link DIR-822 | User Manual - Page 107
    or liquids on your system components, and never operate the device in a wet environment. If the device gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider. • Use the device only with approved equipment. D-Link DIR-822 User Manual 103
  • D-Link DIR-822 | User Manual - Page 108
    strap. Environmental This product may contain a battery. Recycle or dispose of batteries in accordance with the battery manufacturer's instructions and local/national disposal and recycling regulations. For more information, please refer to the warranty guide. D-Link DIR-822 User Manual 104
  • D-Link DIR-822 | User Manual - Page 109
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (866) 354-6599 Internet Support: http://support.dlink.ca D-Link DIR-822 User Manual 105
  • D-Link DIR-822 | User Manual - Page 110
    Appendix F - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 3.0 December 9, 2015 D-Link DIR-822 User Manual 106
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
Version 3.00 | 12/9/2015
User Manual
DIR-822
AC1200 Wi-Fi Router