D-Link DIR-2680-US User Manual

D-Link DIR-2680-US Manual

Get D-Link DIR-2680-US PDF manuals and user guides View all D-Link DIR-2680-US manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DIR-2680-US manual content summary:

  • D-Link DIR-2680-US | User Manual - Page 1
    Version 1.00 2019/03/12 D-Fend AC2600 Wi-Fi Router User Manual DIR-2680
  • D-Link DIR-2680-US | User Manual - Page 2
    StoreSM is a service mark of Apple Link Corporation, Inc. Power Usage This device is an Energy Related Product (ErP) designed to be always on. It can be turned off through a power switch to save energy when it is not needed. Network Standby: 7.15 W Switched Off: 0.25 W D-Link DIR-2680 User Manual
  • D-Link DIR-2680-US | User Manual - Page 3
    IPv6 Host 71 Quick VPN 72 Management 74 Time & Schedule 74 Time 74 Schedule 75 System Log 76 System Admin 78 System 79 User 80 Firmware Upgrade 82 Statistics 84 Voice Assistants 85 D-Link DIR-2680 User Manual ii
  • D-Link DIR-2680-US | User Manual - Page 4
    140 Troubleshooting 142 Wireless Basics 146 What is Wireless 147 Tips 149 Wireless Modes 150 Networking Basics 151 Check your IP address 151 Statically Assign an IP address 152 Wireless Security 153 What is WPA 153 Technical Specifications 154 Regulatory Information 155 D-Link DIR-2680
  • D-Link DIR-2680-US | User Manual - Page 5
    Install Card Setup Guide If any of the above items are missing or damaged, please contact your local reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-2680 will cause damage and void the warranty for this product. D-Link DIR-2680 User Manual 1
  • D-Link DIR-2680-US | User Manual - Page 6
    • Firefox 28 or higher • Safari 6 or higher • Chrome 28 or higher D-Link Wi-Fi Requirements D-Fend App Requirements • iPhone®/iPad®, Android™, or Windows smartphone. (Please refer to the mobile the mobile app's store page to check whether your device is compatible) D-Link DIR-2680 User Manual 2
  • D-Link DIR-2680-US | User Manual - Page 7
    All this is part of the comprehensive parental controls offered by D-Fend. With D-Fend you can also take control of your devices and be the first , and gaming consoles. The built-in Quality of Service (QoS) engine allows you to prioritize important traffic to rate. D-Link DIR-2680 User Manual 3
  • D-Link DIR-2680-US | User Manual - Page 8
    available to share media from a storage device. • Voice Assistant Compatibility - Command D-Fend and your router's functionality4 with your voice through Amazon Alexa and control your Wi- is valid for 2 years. 4 Not all functionality is supported for voice control. D-Link DIR-2680 User Manual 4
  • D-Link DIR-2680-US | User Manual - Page 9
    light indicates a proper connection to the power supply. The light will be solid yellow during the power on process, undergoing factory reset process, or under firmware upgrade process. D-Link DIR-2680 User Manual 5
  • D-Link DIR-2680-US | User Manual - Page 10
    . 4 WPS Button Press to start the WPS process and automatically create an encrypted connection to a WPS client. 5 Power Connector Connector for the supplied power adapter. D-Link DIR-2680 User Manual 6
  • D-Link DIR-2680-US | User Manual - Page 11
    ). • If connecting to a DSL modem, make sure to have your DSL service information provided by your Internet Service Provider handy. This information is likely to include your DSL account's username and take a picture of your existing setup before making any changes. D-Link DIR-2680 User Manual 7
  • D-Link DIR-2680-US | User Manual - Page 12
    wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum each wall or ceiling can reduce your adapter's range from transmits a signal even if the phone is not in use. D-Link DIR-2680 User Manual 8
  • D-Link DIR-2680-US | User Manual - Page 13
    . Place it in an open area for better wireless coverage. DIR-2680 Modem 3. Turn off and unplug the power and Ethernet cable to your cable or DSL broadband modem. This is required. In some cases, you may need to turn it off for up to five minutes. DIR-2680 Modem D-Link DIR-2680 User Manual 9
  • D-Link DIR-2680-US | User Manual - Page 14
    onward. DIR-2680 Modem 6. Connect the supplied power adapter to the router and a power outlet, press the power button, and wait approximately one minute until the LED indicator on the front of the device changes from orange to solid white. DIR-2680 Modem D-Link DIR-2680 User Manual 10
  • D-Link DIR-2680-US | User Manual - Page 15
    end into your computer's Ethernet port. DIR-2680 Modem 8. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE Link Wi-Fi App with the given QR code on the QIC for setup in order to gain full functionality of D-Fend and the DIR-2680. D-Link DIR-2680 User Manual
  • D-Link DIR-2680-US | User Manual - Page 16
    Refer to D-Link Wi-Fi App on page 13. • D-Link Setup Wizard - This wizard will launch when you log in to the router for the first time. Refer to Setup Wizard on page 17. • Manual Setup - Log in to and manually configure your router. Refer to Configuration on page 22. D-Link DIR-2680 User Manual 12
  • D-Link DIR-2680-US | User Manual - Page 17
    Fi App allows you to install and configure your DIR-2680 D-Fend AC2600 Wi-Fi Router from your compatible mobile device. Note: The screenshots may be different depending on your mobile device's OS version. The following steps show the iOS interface of the D-Link Wi-Fi app. If you are using an Android
  • D-Link DIR-2680-US | User Manual - Page 18
    select DIR-2680 from the list of available devices. Tap Next to continue. Step 6 You will now be guided through a step-by-step process for setting up your device. Simply follow the on-screen instructions to complete the installation and DIR-2680 configuration process. D-Link DIR-2680 User Manual
  • D-Link DIR-2680-US | User Manual - Page 19
    D-Link Wi-Fi App (continued) Step 7 In order to use 3rd party services such as D-Fend and Amazon Alexa to control and manage your device, please register your device with D-Link Cloud Service. Step 8 Agree to the Terms of Service and Privacy Notice to use D-Fend. D-Link DIR-2680 User Manual 15
  • D-Link DIR-2680-US | User Manual - Page 20
    Section 3 - Installation D-Link Wi-Fi App (continued) Step 9 Congratulations! You can now connect to your Wi-Fi network using the Wi-Fi name and password you have set up. Tap on the FINISH button to end setup. D-Link DIR-2680 User Manual 16
  • D-Link DIR-2680-US | User Manual - Page 21
    to gain full functionality of D-Fend and the DIR-2680. The wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet can be obtained from your Internet Service Provider) and click Next to continue. D-Link DIR-2680 User Manual 17
  • D-Link DIR-2680-US | User Manual - Page 22
    work through a router. If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. D-Link DIR-2680 User Manual 18
  • D-Link DIR-2680-US | User Manual - Page 23
    to be able to connect to your wireless network. Click Next to continue. Note: The DIR-2680's Smart Connect feature presents a single wireless network. When connecting clients to an extension network, the router's web configuration utility. Click Next to continue. D-Link DIR-2680 User Manual 19
  • D-Link DIR-2680-US | User Manual - Page 24
    to continue. Choose whether to keep your device up to date automatically or if you want to manage device updates yourself. Click Next to continue. D-Link DIR-2680 User Manual 20
  • D-Link DIR-2680-US | User Manual - Page 25
    Section 3 - Installation Setup Wizard (continued) You will be presented with a summary of your settings. Click Next to finalize the settings or Back to make changes. Congratulations, your device has been successfully configured! Click OK finish. D-Link DIR-2680 User Manual 21
  • D-Link DIR-2680-US | User Manual - Page 26
    of the device for longer than 10 seconds to restore the router to its default settings. DIR-2680 comes with pre-configured device password. The password is located on both the Quick Installation Card The system will automatically log out after a period of inactivity. D-Link DIR-2680 User Manual 22
  • D-Link DIR-2680-US | User Manual - Page 27
    disconnect from the Internet. If you do this and wish to reconnect, click Renew. To reconfigure the Internet settings, refer to Internet on page 27. D-Link DIR-2680 User Manual 23
  • D-Link DIR-2680-US | User Manual - Page 28
    Section 4 - Configuration DIR-2680 Click on the DIR-2680 icon to view details about the router and its wireless settings. Here you can see the router's current Wi the page) and then Wireless on the menu that appears. Refer to Wireless on page 54 for more information. D-Link DIR-2680 User Manual 24
  • D-Link DIR-2680-US | User Manual - Page 29
    current IP address of this client. Reserve IP: Enable to reserve this IP address for this client. IP Address Specify an IP address for the DIR-2680's DHCP server to assign. (Reserved): Click Save when you are done. D-Link DIR-2680 User Manual 25
  • D-Link DIR-2680-US | User Manual - Page 30
    (at the top of the page) and then USB Sharing on the menu that appears. Refer to USB Sharing on page 67 for more information. D-Link DIR-2680 User Manual 26
  • D-Link DIR-2680-US | User Manual - Page 31
    refer to page 32. For L2TP refer to page 34. For DS-Lite refer to page 36. To configure an IPv6 connection, click the IPv6 link. Refer to page 37. D-Link DIR-2680 User Manual 27
  • D-Link DIR-2680-US | User Manual - Page 32
    IP (DHCP) Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not specify an IP address to use. the MAC address of a connected client. Click Save when you are done. D-Link DIR-2680 User Manual 28
  • D-Link DIR-2680-US | User Manual - Page 33
    4 - Configuration Static IP Select Static IP if your IP information is provided by your Internet Service Provider (ISP). IP Address: Enter the IP address provided by your ISP. Subnet Mask: with the MAC address of a connected client. Click Save when you are done. D-Link DIR-2680 User Manual 29
  • D-Link DIR-2680-US | User Manual - Page 34
    gateway, and DNS server addresses. In most cases, select Dynamic IP. Dynamic IP Service Name: Enter the ISP service name (optional). Primary DNS Enter the primary DNS server IP address assigned by your performance with your ISP. The recommended setting is Auto. D-Link DIR-2680 User Manual 30
  • D-Link DIR-2680-US | User Manual - Page 35
    connected client. Static IP IP Address: Enter the IP address provided by your ISP. Service Name: Enter the ISP service name (optional). Primary DNS Enter the primary DNS server IP address assigned by your ISP. of a connected client. Click Save when you are done. D-Link DIR-2680 User Manual 31
  • D-Link DIR-2680-US | User Manual - Page 36
    4 - Configuration PPTP Choose PPTP (Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username change the MTU for optimal performance with your ISP. The recommended setting is Auto. D-Link DIR-2680 User Manual 32
  • D-Link DIR-2680-US | User Manual - Page 37
    Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. Click Save when you are done. D-Link DIR-2680 User Manual 33
  • D-Link DIR-2680-US | User Manual - Page 38
    Section 4 - Configuration L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide you with a username change the MTU for optimal performance with your ISP. The recommended setting is Auto. D-Link DIR-2680 User Manual 34
  • D-Link DIR-2680-US | User Manual - Page 39
    Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto. Click Save when you are done. D-Link DIR-2680 User Manual 35
  • D-Link DIR-2680-US | User Manual - Page 40
    IPv6 WAN Default Once connected, the IPv6 WAN default gateway address will be Gateway: displayed here. Manual Configuration AFTR IPv6 Enter the AFTR IPv6 address used here. Address: B4 IPv6 Address: Enter the be Gateway: displayed here. Click Save when you are done. D-Link DIR-2680 User Manual 36
  • D-Link DIR-2680-US | User Manual - Page 41
    Section 4 - Configuration IPv6 To configure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4. My Internet Choose your IPv6 connection type from the to page 45. For 6rd refer to page 49. For Local Connectivity Only refer to page 51. D-Link DIR-2680 User Manual 37
  • D-Link DIR-2680-US | User Manual - Page 42
    router's LAN link-local address. Local Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: D-Link DIR-2680 User Manual 38
  • D-Link DIR-2680-US | User Manual - Page 43
    's IPv6 assignment. Range (Start): IPv6 Address Enter the ending IPv6 address for the DHCP server's IPv6 assignment. Range (End): Click Save when you are done. D-Link DIR-2680 User Manual 39
  • D-Link DIR-2680-US | User Manual - Page 44
    if your IPv6 information is provided by your Internet Service Provider (ISP). Use Link-Local Enable or disable link-local address use. Address: Default Gateway: Enter address for the router. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: D-Link DIR-2680 User Manual 40
  • D-Link DIR-2680-US | User Manual - Page 45
    address for the DHCP server's IPv6 assignment. Range (End): IPv6 Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-2680 User Manual 41
  • D-Link DIR-2680-US | User Manual - Page 46
    router's LAN link-local address. Local Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: D-Link DIR-2680 User Manual 42
  • D-Link DIR-2680-US | User Manual - Page 47
    IPv6 address for the DHCP server's IPv6 assignment. Range (Start): IPv6 Address Enter the ending IPv6 address for the DHCP server's IPv6 assignment. Range (End): D-Link DIR-2680 User Manual 43
  • D-Link DIR-2680-US | User Manual - Page 48
    address for the DHCP server's IPv6 assignment. Range (End): IPv6 Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-2680 User Manual 44
  • D-Link DIR-2680-US | User Manual - Page 49
    selected Static IP as the Address Mode and Create a new session as the PPPoE Session: IP Address: Enter the IP address provided by your ISP Service Name: Enter the ISP service name (optional). D-Link DIR-2680 User Manual 45
  • D-Link DIR-2680-US | User Manual - Page 50
    the router's LAN link-local address. Local Address: If Enable DHCP-PD is disabled these additional parameters are available for configuration: LAN IPv6 Address: If DHCP-PD disabled or static address mode is selected, enter the LAN (local) IPv6 address for the router. D-Link DIR-2680 User Manual 46
  • D-Link DIR-2680-US | User Manual - Page 51
    Section 4 - Configuration PPPoE (continued) LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: Advanced Settings - Address Autoconfiguration Settings Router Enter the router advertisement lifetime (in minutes). Advertisement Lifetime: D-Link DIR-2680 User Manual 47
  • D-Link DIR-2680-US | User Manual - Page 52
    address for the DHCP server's IPv6 assignment. Range (End): IPv6 Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-2680 User Manual 48
  • D-Link DIR-2680-US | User Manual - Page 53
    Server: Secondary DNS Enter the secondary DNS server address. Server: 6rd Manual Configuration Enable Hub and Enable this option if you want to minimize LAN IPv6 Address link-local address. LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: D-Link DIR-2680 User Manual 49
  • D-Link DIR-2680-US | User Manual - Page 54
    address for the DHCP server's IPv6 assignment. Range (End): IPv6 Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-2680 User Manual 50
  • D-Link DIR-2680-US | User Manual - Page 55
    IPv6 ULA Settings Current ULA Displays the current ULA prefix. Prefix: LAN IPv6 ULA: Displays the LAN's IPv6 ULA. Click Save when you are done. D-Link DIR-2680 User Manual 51
  • D-Link DIR-2680-US | User Manual - Page 56
    your Internet connection, as provided by your ISP. IPTV VLAN ID Enter the VLAN ID for your IPTV service, as provided by your ISP. VOIP VLAN ID: Enter the VLAN ID for your VoIP network, as provided ID traffic takes precedence over traffic with a low priority ID tag. D-Link DIR-2680 User Manual 52
  • D-Link DIR-2680-US | User Manual - Page 57
    , you can select the type of connection Guest Zone: (Internet, IPTV, or Voice over IP) coming from the WAN connection to each interface on the DIR-2680. Click Save when you are done. D-Link DIR-2680 User Manual 53
  • D-Link DIR-2680-US | User Manual - Page 58
    WPS-PBC (Push Button Configuration) functionality. Refer to the next page if you wish to disable Smart Connect or click Save when you are done. D-Link DIR-2680 User Manual 54
  • D-Link DIR-2680-US | User Manual - Page 59
    Auto 20/40 if you are using 802.11n and 802.11a devices, or select 20 MHz if you are only using 802.11a devices. D-Link DIR-2680 User Manual 55
  • D-Link DIR-2680-US | User Manual - Page 60
    disabled by default due to security vulnerabilities. WPS-PBC Status: Enable or disable WPS-PBC (Push Button Configuration) functionality. Click Save when you are done. D-Link DIR-2680 User Manual 56
  • D-Link DIR-2680-US | User Manual - Page 61
    wireless bands. In the Settings menu on the bar on the top of the page, click Wireless, then click the Guest Zone link. 2.4 GHz / 5 GHz Status: Enable or disable the 2.4 GHz / 5 GHz wireless network. Wi-Fi Name (SSID for more information. Click Save when you are done. D-Link DIR-2680 User Manual 57
  • D-Link DIR-2680-US | User Manual - Page 62
    default subnet mask is 255.255.255.0. Management The default address to access the router's configuration is Link: http://dlinkrouter.local/. Here, you can replace dlinkrouter with a name of your choice. Local , your computers will use the router for a DNS server. D-Link DIR-2680 User Manual 58
  • D-Link DIR-2680-US | User Manual - Page 63
    starting and ending IP addresses for the DHCP server's IP Range: assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range Stream: the Internet. Click Save when you are done. D-Link DIR-2680 User Manual 59
  • D-Link DIR-2680-US | User Manual - Page 64
    port number of FTP server. Idle Time: Enter the time (in minutes) before connected clients will be considered idle. Click Save when you are done. D-Link DIR-2680 User Manual 60
  • D-Link DIR-2680-US | User Manual - Page 65
    or Google AssistantTM for your device through Cloud. You can view the account information that is currently registered with your device's D-Link Cloud account. Registration is done through the D-Link Wi-Fi app which can be found in the App Store or Google PlayTM. D-Link DIR-2680 User Manual 61
  • D-Link DIR-2680-US | User Manual - Page 66
    Section 4 - Configuration Features QoS Engine The Quality of Service (QoS) Engine will allow you to prioritize particular clients over others, so that those clients receive . Upload Speed Set maximum upload rate limit to apply to the QoS Engine (Mbps): configuration. D-Link DIR-2680 User Manual 62
  • D-Link DIR-2680-US | User Manual - Page 67
    return it to the All Devices list, click the cross icon in the top right of the device card. Click Save when you are done. D-Link DIR-2680 User Manual 63
  • D-Link DIR-2680-US | User Manual - Page 68
    from certain kinds Checking: of "spoofing" attacks. IPv6 Simple Enable or disable IPv6 simple security. Security: IPv6 Ingress Enable or disable IPv6 ingress filtering. Filtering: D-Link DIR-2680 User Manual 64
  • D-Link DIR-2680-US | User Manual - Page 69
    clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This Application Level Gateway (ALG) may interfere you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link DIR-2680 User Manual 65
  • D-Link DIR-2680-US | User Manual - Page 70
    create your own schedules in the Schedules section. Refer to Refer to Schedule on page 75 for more information. Click Save when you are done. D-Link DIR-2680 User Manual 66
  • D-Link DIR-2680-US | User Manual - Page 71
    Local IP: Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu. TCP Port: Enter the TCP ports that you 75 for more information. Click Save when you are done. D-Link DIR-2680 User Manual 67
  • D-Link DIR-2680-US | User Manual - Page 72
    the interface that the IP packet must use to transit out of the router when this route is used. Click Save when you are done. D-Link DIR-2680 User Manual 68
  • D-Link DIR-2680-US | User Manual - Page 73
    the interface that the IP packet must use to transit out of the router when this route is used. Click Save when you are done. D-Link DIR-2680 User Manual 69
  • D-Link DIR-2680-US | User Manual - Page 74
    from the drop-down menu. Host Name: Enter the host name that you registered with your dynamic DNS service provider. User Name: Enter your dynamic DNS username. Password: Enter your dynamic DNS password. Time Out: Enter dynamic DNS host, refer to IPv6 Host on page 71. D-Link DIR-2680 User Manual 70
  • D-Link DIR-2680-US | User Manual - Page 75
    will appear: Host Name: Enter the host name that you registered with your dynamic DNS service provider. IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Save when you are done. D-Link DIR-2680 User Manual 71
  • D-Link DIR-2680-US | User Manual - Page 76
    Quick VPN. Click User to create, manage, and delete user accounts with user-defined access to certain router services. Refer to User on page 87. Configure the following options: L2TP over IPsec: Enable or disable the for Device and Mac iOS device and Mac OS X. OS X: D-Link DIR-2680 User Manual 72
  • D-Link DIR-2680-US | User Manual - Page 77
    the default. MPPE: Select the encryption cipher strength: None, RC4-40, or RC4-128. RC4-128 is the default. Click Save when you are done. D-Link DIR-2680 User Manual 73
  • D-Link DIR-2680-US | User Manual - Page 78
    menu. To configure the router's time and date manually, disable this option and use the drop-down menus that appear to input the time and date. Click Save when you are done. To configure and manage your schedules, click Schedule and refer to Schedule on page 75. D-Link DIR-2680 User Manual 74
  • D-Link DIR-2680-US | User Manual - Page 79
    schedule, but only one period per day. To remove a time period from the schedule, click on the cross icon. Click Save when you are done. D-Link DIR-2680 User Manual 75
  • D-Link DIR-2680-US | User Manual - Page 80
    sent from. Address: To E-mail Address: Enter the email address your SysLog messages will be sent to. SMTP Server Enter your SMTP server address. Address: D-Link DIR-2680 User Manual 76
  • D-Link DIR-2680-US | User Manual - Page 81
    you can create your own schedules in the Schedules section. Refer to Schedule on page 75 for more information. Click Save when you are done. D-Link DIR-2680 User Manual 77
  • D-Link DIR-2680-US | User Manual - Page 82
    a new password for the administrator account. You will need to enter this password whenever you configure the router using a web browser or using the D-Link Wi-Fi app. LED Control Status LED: Click to enable/disable status LED of device. Click Save when you are done. D-Link DIR-2680 User Manual 78
  • D-Link DIR-2680-US | User Manual - Page 83
    Reboot: You may set the DIR-2680 to automatically reboot at a set time. The options are Never, Daily, and Weekly. You may set the hour using a 24 hour format, the minute, and the day you wish to have the DIR-2680 automatically reboot. Click Save when you are done. D-Link DIR-2680 User Manual 79
  • D-Link DIR-2680-US | User Manual - Page 84
    User section is used to create, manage, and delete user accounts with user-defined access to certain router services. In the Management menu on the bar on the top of the page, click User. If you permission. Folder: Click Browse to select the folder you want to share. D-Link DIR-2680 User Manual 80
  • D-Link DIR-2680-US | User Manual - Page 85
    the folder you want to share. VPN Status: Enable or disable Virtual Private Network (VPN) functionality for this user. Click Save when you are done. D-Link DIR-2680 User Manual 81
  • D-Link DIR-2680-US | User Manual - Page 86
    . Upgrade: Choose Upgrade Enable this function to set the router to automatically upgrade its Time: firmware at a set time. Upgrade Time: Configurable if Choose Upgrade Time is enabled. Set the hour and minute to automatically upgrade by using the drop-down menus. D-Link DIR-2680 User Manual 82
  • D-Link DIR-2680-US | User Manual - Page 87
    Section 4 - Configuration Upgrade Manually Upgrade To upgrade manually, download the firmware file you wish to upgrade Firmware: to. Click the Upgrade Firmware button and browse to the file to install the new firmware. Click Save when you are done. D-Link DIR-2680 User Manual 83
  • D-Link DIR-2680-US | User Manual - Page 88
    graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DIR-2680 User Manual 84
  • D-Link DIR-2680-US | User Manual - Page 89
    party services such as D-Fend, Amazon Alexa and the Google Assistant to control and manage your device, please register your device with D-Link Cloud Service. This section will go through how to set up and link Amazon Alexa or Google Assistant to D-Link Wi-Fi account. D-Link DIR-2680 User Manual
  • D-Link DIR-2680-US | User Manual - Page 90
    the same. Step 1 Launch the Amazon Alexa app. Step 2 Tap the menu icon on the top left-hand corner of the home screen. Amazon Alexa D-Link DIR-2680 User Manual 86
  • D-Link DIR-2680-US | User Manual - Page 91
    Section 4 - Voice Assistants Step 3 Tap on Skills & Games. Step 4 Search for "D-Link Wi-Fi". Tap on the search result. D-Link DIR-2680 User Manual 87
  • D-Link DIR-2680-US | User Manual - Page 92
    Section 4 - Voice Assistants Step 5 Tap Enable to link the skill. Step 6 Sign in using your D-Link account details. D-Link DIR-2680 User Manual 88
  • D-Link DIR-2680-US | User Manual - Page 93
    ! D-Link Wi-Fi has been successfully linked as a skill for your Amazon device. Close the window by tapping Done on the top left corner of the screen. Refer to Amazon Alexa Voice Commands on page 90 for tasks that you can ask your Amazon Alexa to perform. D-Link DIR-2680 User Manual 89
  • D-Link DIR-2680-US | User Manual - Page 94
    "Alexa, ask D-Link Wi-Fi to enable my guest zone." "Alexa, ask D-Link Wi-Fi to disable my guest zone." "Alexa, ask D-Link Wi-Fi what are my guest network credentials." "Alexa, ask D-Link Wi-Fi to reboot the router." "Alexa, ask D-Link Wi-Fi to upgrade my router." D-Link DIR-2680 User Manual 90
  • D-Link DIR-2680-US | User Manual - Page 95
    different from that of the screenshots, but the process is the same. Step 1 Launch the Google Assistant app. Step 2 Tell your Assistant to "Talk to D-Link Wi-Fi." Assistant D-Link DIR-2680 User Manual 91
  • D-Link DIR-2680-US | User Manual - Page 96
    Section 4 - Voice Assistants Step 3 Tap Yes. Step 4 Sign in using your D-Link account details. D-Link DIR-2680 User Manual 92
  • D-Link DIR-2680-US | User Manual - Page 97
    Section 4 - Voice Assistants Step 5 Congratulations! D-Link Wi-Fi has been successfully linked to your Google Assistant Refer to Google Assistant Voice Commands on page 94 for tasks that you can ask your Google Home to perform. D-Link DIR-2680 User Manual 93
  • D-Link DIR-2680-US | User Manual - Page 98
    enable my guest zone." "OK Google, ask D-Link Wi-Fi to disable my guest zone." "OK Google, talk to D-Link Wi-Fi to tell me my guest network credentials." "OK Google, talk to D-Link Wi-Fi to reboot the router." "OK Google, talk to D-Link Wi-Fi to upgrade my router." D-Link DIR-2680 User Manual 94
  • D-Link DIR-2680-US | User Manual - Page 99
    to your network. D-Fend also works with Amazon Alexa to give you a new way to command and monitor your home network using your voice. You can scan your network, block devices, and get up to speed on your network notifications - all without lifting a finger. D-Link DIR-2680 User Manual 95
  • D-Link DIR-2680-US | User Manual - Page 100
    Android device, the appearance may be different from that of the screenshots, but the process is the same. Step 1 Launch the D-Link Wi-Fi app from the home screen of your device. Step 2 Tap the settings gear icon on the top right corner of the screen. D-Link Wi-Fi D-Link DIR-2680 User Manual 96
  • D-Link DIR-2680-US | User Manual - Page 101
    Section 5 - D-Fend Step 3 Tap the D-Fend icon. Step 4 Tap the Download App button. The link will direct you to download the app from Google Play or the App Store. D-Link DIR-2680 User Manual 97
  • D-Link DIR-2680-US | User Manual - Page 102
    Section 5 - D-Fend Step 5 You can now launch the D-Fend app from within the D-Link Wi-Fi app or from your home screen. D-Fend D-Link DIR-2680 User Manual 98
  • D-Link DIR-2680-US | User Manual - Page 103
    Alexa app, an Amazon account and an Amazon Alexa device to use this feature. Note: D-Fend to Alexa linking is only available on Android devices. Step 1 Launch the Amazon Alexa app. Step 2 Tap the menu icon on the top left corner of the home screen. Amazon Alexa D-Link DIR-2680 User Manual 99
  • D-Link DIR-2680-US | User Manual - Page 104
    Section 5 - D-Fend Step 3 Tap on Skills. Step 4 Search for "D-Fend". Tap on the search result. D-Link DIR-2680 User Manual 100
  • D-Link DIR-2680-US | User Manual - Page 105
    Section 5 - D-Fend Step 5 Tap Enable to link the skill. Step 6 Sign in using your D-Link account details. D-Link DIR-2680 User Manual 101
  • D-Link DIR-2680-US | User Manual - Page 106
    Section 5 - D-Fend Step 7 Congratulations! D-Fend has been successfully linked as a skill for your Amazon device. D-Link DIR-2680 User Manual 102
  • D-Link DIR-2680-US | User Manual - Page 107
    internet for Jim." "Alexa, ask D-Fend to start a vulnerability scan." "Alexa, ask D-Fend to assign web time for Jim." "Alexa, ask D-Fend to switch to home router." "Alexa, ask D-Fend to unblock Jim's iPhone." "Alexa, ask D-Fend which router am I currently managing." D-Link DIR-2680 User Manual 103
  • D-Link DIR-2680-US | User Manual - Page 108
    you set for that child. Block, Unblock and Forget a Device The D-Fend app makes it easy to block, unblock, or forget an individual device on by using well-known default usernames and passwords. If your firmware is out of date, your device could be exposed to security Link DIR-2680 User Manual 104
  • D-Link DIR-2680-US | User Manual - Page 109
    credit card numbers. When traveling, Quick VPN lets you watch sports and use video streaming services without experiencing blackouts or filtering. You can surf the whole Internet unfiltered and unblocked, just with Quick VPN Server Unencrypted Data Encrypted Data D-Link DIR-2680 User Manual 105
  • D-Link DIR-2680-US | User Manual - Page 110
    supports up to five concurrent VPN client sessions using the same login and password are supported . If you have trouble using Quick VPN on some Link DDNS, to eliminate the need to reconfigure client devices in the event your ISP assigns you a new WAN IP address. D-Link DIR-2680 User Manual
  • D-Link DIR-2680-US | User Manual - Page 111
    Section 6 - Quick VPN iOS Devices VPN Setup Instructions This section provides Quick VPN setup instructions for iOS devices. Refer to Quick VPN on page 72 for more information on setting see a pop up window asking you to fill out the details of your VPN connection. D-Link DIR-2680 User Manual 107
  • D-Link DIR-2680-US | User Manual - Page 112
    Section 6 - Quick VPN VPN Setup Instructions (Continued) 3. Tap Type and choose IPSec. Tap Back when done. 4. Fill in Description, Server, Account, server. Password: Enter Password used to authenticate login to VPN server. Secret: Enter your Passkey (PSK). D-Link DIR-2680 User Manual 108
  • D-Link DIR-2680-US | User Manual - Page 113
    Section 6 - Quick VPN VPN Setup Instructions (Continued) 5. Tap Done to save and return to the main VPN Configurations page. Your iOS device is now configured to connect to your Quick VPN server. D-Link DIR-2680 User Manual 109
  • D-Link DIR-2680-US | User Manual - Page 114
    icon will appear in the notification area at the top of your screen indicating that your device is currently connected to the Quick VPN server. D-Link DIR-2680 User Manual 110
  • D-Link DIR-2680-US | User Manual - Page 115
    Section 6 - Quick VPN Mac OS X VPN Setup Instructions This section provides Quick VPN setup instructions for OS X using the Export Profile function. Refer to Quick System Preferences... > Network and select the Quick VPN connection and click Authentication Settings. D-Link DIR-2680 User Manual 111
  • D-Link DIR-2680-US | User Manual - Page 116
    Section 6 - Quick VPN VPN Setup Instructions (Continued) Enter your Passkey in the Shared Secret text box and click OK, Apply, then OK. Your Mac is now configured to connect to your Quick VPN server. D-Link DIR-2680 User Manual 112
  • D-Link DIR-2680-US | User Manual - Page 117
    Section 6 - Quick VPN Connect or Disconnect  To connect to or disconnect from your Quick VPN server, go to > System Preferences... > Network. Select the Quick VPN connection and click on the Connect or Disconnect button. D-Link DIR-2680 User Manual 113
  • D-Link DIR-2680-US | User Manual - Page 118
    Section 6 - Quick VPN Windows 7 VPN Setup Instructions Click the Start button and type vpn into the Search programs and files box. Select Set up a virtual private in the Destination Name, check Don't Connect now; just set it up so I can connect later, and click Next. D-Link DIR-2680 User Manual 114
  • D-Link DIR-2680-US | User Manual - Page 119
    Section 6 - Quick VPN VPN Setup Instructions (Continued) Enter your Username. If you would like windows to save your password, enter your Password and and type view network connections into the Search programs and files text box. Select View network connections. D-Link DIR-2680 User Manual 115
  • D-Link DIR-2680-US | User Manual - Page 120
    Section 6 - Quick VPN VPN Setup Instructions (Continued) Click Advanced settings. Enter your Passkey in the Key text box under Use preshared key for Quick VPN Connection Properties. Your Windows 7 system is now configured to connect to your Quick VPN server. D-Link DIR-2680 User Manual 116
  • D-Link DIR-2680-US | User Manual - Page 121
    the Windows taskbar and from the Dial Up and VPN section click on your Quick VPN connection and click on the Connect or Disconnect button. D-Link DIR-2680 User Manual 117
  • D-Link DIR-2680-US | User Manual - Page 122
    Section 6 - Quick VPN Windows 8.1/8 VPN Setup Instructions This section provides Quick VPN setup instructions for Windows 8.1/8 Click the Start button and type vpn. Select Manage virtual private networks. From the Network Settings page, click Add a VPN Connection. D-Link DIR-2680 User Manual 118
  • D-Link DIR-2680-US | User Manual - Page 123
    . 5 If you would like windows to remember your sign-in information, enter your User name, Password, and select Remember my sign-in info 6 Choose Save. D-Link DIR-2680 User Manual 119
  • D-Link DIR-2680-US | User Manual - Page 124
    Section 6 - Quick VPN VPN Setup Instructions (Continued) Right-click on the Quick VPN Connection you just created and left-click on Properties. Select the Security tab. For the Type of VPN, select Layer 2 Tunneling with IPsec (L2TP/IPSec). D-Link DIR-2680 User Manual 120
  • D-Link DIR-2680-US | User Manual - Page 125
    Setup Instructions (Continued) Click the Start button and type view network connections. Select View network connections. Right-click your Quick VPN Connection and left-click Properties. Select the Security tab. For the Type of VPN, select Layer 2 Tunneling with IPsec (L2TP/IPSec). D-Link DIR-2680
  • D-Link DIR-2680-US | User Manual - Page 126
    Section 6 - Quick VPN VPN Setup Instructions (Continued) Click Advanced settings. Enter your Passkey in the Key text box under Use preshared key for close Quick VPN Properties. Your Windows 8.1/8 system is now configured to connect to your Quick VPN server. D-Link DIR-2680 User Manual 122
  • D-Link DIR-2680-US | User Manual - Page 127
    Section 6 - Quick VPN Connect or Disconnect To connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notification area of the Windows taskbar. Click on your Quick VPN connection and click on the Connect or Disconnect button. D-Link DIR-2680 User Manual 123
  • D-Link DIR-2680-US | User Manual - Page 128
    Section 6 - Quick VPN Windows 10 VPN Setup Instructions This section provides Quick VPN setup instructions for Windows 10. Click Start > Settings > Network & Internet > Network and Sharing Center > VPN > Add a VPN Connection. D-Link DIR-2680 User Manual 124
  • D-Link DIR-2680-US | User Manual - Page 129
    name, Password, and select Remember my sign-in info 7 Choose Save. Your Windows 10 system is now configured to connect to your Quick VPN server. D-Link DIR-2680 User Manual 125
  • D-Link DIR-2680-US | User Manual - Page 130
    of the Windows taskbar and click on your Quick VPN connection. The Network & Internet Settings page will open. Click on the Connect or Disconnect button. D-Link DIR-2680 User Manual 126
  • D-Link DIR-2680-US | User Manual - Page 131
    Section 6 - Quick VPN Android VPN Setup Instructions This section provides Quick VPN setup instructions for Android devices. Your device's screens may vary. Go to Settings > More from the Wireless & networks > VPN > ADD VPN NETWORK D-Link DIR-2680 User Manual 127
  • D-Link DIR-2680-US | User Manual - Page 132
    . 4 Enter your Passkey (PSK) in IPSec pre-shared key field. 5 Choose Save. Your Android device is now configured to connect to your Quick VPN server. D-Link DIR-2680 User Manual 128
  • D-Link DIR-2680-US | User Manual - Page 133
    Section 6 - Quick VPN Connect or Disconnect To connect to or disconnect from your Quick VPN server, go to Settings > More from the Wireless & networks > VPN and select the Quick VPN connection you created. D-Link DIR-2680 User Manual 129
  • D-Link DIR-2680-US | User Manual - Page 134
    Section 6 - Quick VPN Connect or Disconnect (Continued) To connect, enter your Username and Password and select CONNECT. To disconnect, select DISCONNECT. D-Link DIR-2680 User Manual 130
  • D-Link DIR-2680-US | User Manual - Page 135
    (or a software utility with WPS) that you can press to connect to the DIR-2680 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable and your wireless connection will be secure with WPA2. D-Link DIR-2680 User Manual 131
  • D-Link DIR-2680-US | User Manual - Page 136
    Section 6- Connecting a Wireless Client Windows® 10 When connecting to the DIR-2680 wirelessly for the first time, you will need to input the wireless network name (SSID) range of your computer. Select the desired network by clicking on the SSID. Wireless Icon D-Link DIR-2680 User Manual 132
  • D-Link DIR-2680-US | User Manual - Page 137
    network when it is detected. You can also use Wi-Fi Protected Setup (WPS) to connect to the router. Press the WPS button on your D-Link device and you will be automatically connected. D-Link DIR-2680 User Manual 133
  • D-Link DIR-2680-US | User Manual - Page 138
    icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DIR-2680 User Manual 134
  • D-Link DIR-2680-US | User Manual - Page 139
    have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DIR-2680 User Manual 135
  • D-Link DIR-2680-US | User Manual - Page 140
    . 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-2680 User Manual 136
  • D-Link DIR-2680-US | User Manual - Page 141
    get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-2680 User Manual 137
  • D-Link DIR-2680-US | User Manual - Page 142
    fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-2680 User Manual 138
  • D-Link DIR-2680-US | User Manual - Page 143
    utility. If you are using another company's wireless utility, please refer to the user manual of your wireless adapter for help connecting to a wireless network. Most wireless utilities will to the Networking Basics section in this manual for more information. D-Link DIR-2680 User Manual 139
  • D-Link DIR-2680-US | User Manual - Page 144
    tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-2680 User Manual 140
  • D-Link DIR-2680-US | User Manual - Page 145
    fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-2680 User Manual 141
  • D-Link DIR-2680-US | User Manual - Page 146
    Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-2680. Read the following descriptions if you are having problems. for more information on disabling or configuring it. D-Link DIR-2680 User Manual 142
  • D-Link DIR-2680-US | User Manual - Page 147
    Section 7 - Troubleshooting • Configure your Internet settings: • Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the to access the router. The default IP address is 192.168.0.1. When logging in, leave the password box empty. D-Link DIR-2680 User Manual 143
  • D-Link DIR-2680-US | User Manual - Page 148
    Section 7 - Troubleshooting 3. Why can't I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-2680 User Manual 144
  • D-Link DIR-2680-US | User Manual - Page 149
    7 - Troubleshooting You should Manual Configure. • To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-2680 User Manual
  • D-Link DIR-2680-US | User Manual - Page 150
    . Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DIR-2680 User Manual 146
  • D-Link DIR-2680-US | User Manual - Page 151
    winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-2680 User Manual 147
  • D-Link DIR-2680-US | User Manual - Page 152
    in recent years that almost everyone is using it, whether it's for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits • Gives everyone at home broadband access • Surf printer with multiple computers • No need to dedicate office space D-Link DIR-2680 User Manual 148
  • D-Link DIR-2680-US | User Manual - Page 153
    people. The wireless connection in public places is usually called "hotspots". Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet on the router. Refer to the product manual for detail information on how to set it up. D-Link DIR-2680 User Manual 149
  • D-Link DIR-2680-US | User Manual - Page 154
    -to-peer communication using wireless network adapters on each computer, such as two or more DIR-2680 wireless network USB adapters. An Infrastructure network contains an access point or wireless router. All . All the adapters must be in Ad-hoc mode to communicate. D-Link DIR-2680 User Manual 150
  • D-Link DIR-2680-US | User Manual - Page 155
    B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-2680 User Manual 151
  • D-Link DIR-2680-US | User Manual - Page 156
    (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-2680 User Manual 152
  • D-Link DIR-2680-US | User Manual - Page 157
    will show you the different levels of security you can use to protect your data from intruders. The DIR-2680 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre that only authorized network users can access the network. D-Link DIR-2680 User Manual 153
  • D-Link DIR-2680-US | User Manual - Page 158
    , and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on country's regulation. 3 The DIR-2680 does not include 5.25-5.35 GHz & 5.47-5.725 GHz in some regions. D-Link DIR-2680 User Manual 154
  • D-Link DIR-2680-US | User Manual - Page 159
    radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee any interference received, including interference that may cause undesired operation. D-Link DIR-2680 User Manual 155
  • D-Link DIR-2680-US | User Manual - Page 160
    non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 50 cm de distance entre la source de rayonnement et votre corps. D-Link DIR-2680 User Manual 156
  • D-Link DIR-2680-US | User Manual - Page 161
    Appendix D - Regulatory Information MPE標準值1 mW/cm2 43 cm。 D-Link DIR-2680 User Manual 157
  • D-Link DIR-2680-US | User Manual - Page 162
    . Output Power (EIRP) Max. Output Power Consommation d'énergie max. Potencia máxima de Salida Potenza max. Output Max. Output Power 200 mW 200 mW 1 W 100 mW D-Link DIR-2680 User Manual 158
  • D-Link DIR-2680-US | User Manual - Page 163
    dichiara che questo prodotto, i relativi accessori e il software sono conformi alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE e il firmware del prodotto sono disponibili per il download dalla pagina del prodotto su www.dlink.com. D-Link DIR-2680 User Manual 159
  • D-Link DIR-2680-US | User Manual - Page 164
    .com. D-Link Corporation täten vakuuttaa, että tämä tuote, lisävarusteet ja ohjelmisto ovat direktiivin 2014/53/EU vaatimusten mukaisia. Täydellinen EU-vaatimustenmukaisuusvakuutus samoin kuin tuotteen laiteohjelmisto ovat ladattavissa osoitteesta www.dlink.com. D-Link DIR-2680 User Manual 160
  • D-Link DIR-2680-US | User Manual - Page 165
    /EU. Hela texten med EU-försäkran om överensstämmelse och produkt-firmware kan hämtas från produktsidan på www.dlink.com. Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru outlet should be near the device and easily accessible. D-Link DIR-2680 User Manual 161
  • D-Link DIR-2680-US | User Manual - Page 166
    -to-peer communication between two client devices without an Access Point. • Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link DIR-2680 User Manual 162
  • D-Link DIR-2680-US | User Manual - Page 167
    de 5 GHz au sein de l'UE. • Merci de vous référer au guide d'utilisation ou de la fiche technique afin de vérifier si votre produit utilise 2.4 el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link DIR-2680 User Manual 163
  • D-Link DIR-2680-US | User Manual - Page 168
    ) richieste per operare a 5 Ghz nell'Unione europea. • Ti invitiamo a fare riferimento al manuale del prodotto o alla scheda tecnica per verificare se il tuo prodotto utilizza le frequenze 2,4 GHz te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link DIR-2680 User Manual 164
  • D-Link DIR-2680-US | User Manual - Page 169
    Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read and follow the instructions in the user manual. • Do not und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link DIR-2680 User Manual 165
  • D-Link DIR-2680-US | User Manual - Page 170
    nunca. Para algunos productos con batería reemplazable por el usuario, lea y siga las instrucciones del manual de usuario. • No derrame comida o líquidos sobre el producto y nunca deje que caigan objetos red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link DIR-2680 User Manual 166
  • D-Link DIR-2680-US | User Manual - Page 171
    alcuni prodotti dotati di batteria sostituibile dall'utente, leggere e seguire le istruzioni riportate nel manuale dell'utente. • Non versare cibi o liquidi sul prodotto e non spingere mai alcun u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DIR-2680 User Manual 167
  • D-Link DIR-2680-US | User Manual - Page 172
    this manner you help to conserve the environment and protect human health. D-Link and the Environment At D-Link, we understand and are committed to reducing any impact our operations and products entsprechende Informationen im Internet unter www.dlinkgreen.com. D-Link DIR-2680 User Manual 168
  • D-Link DIR-2680-US | User Manual - Page 173
    apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir las emisiones de CO2. Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio www.dlinkgreen.com. D-Link DIR-2680 User Manual 169
  • D-Link DIR-2680-US | User Manual - Page 174
    D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies. Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen. D-Link DIR-2680 User Manual
  • D-Link DIR-2680-US | User Manual - Page 175
    . Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit energii a snížit emise CO2. Více informací o našich ekologických výrobcích a obalech najdete na adrese www.dlinkgreen.com. D-Link DIR-2680 User Manual 171
  • D-Link DIR-2680-US | User Manual - Page 176
    at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp. For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til www.dlinkgreen.com. D-Link DIR-2680 User Manual 172
  • D-Link DIR-2680-US | User Manual - Page 177
    D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin autat säästämään energiaa ja vähentämään hiilidioksiidipäästöjä. Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com. D-Link DIR-2680 User Manual 173
  • D-Link DIR-2680-US | User Manual - Page 178
    que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar energia e reduzir as emissões de CO2. Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite www.dlinkgreen.com. D-Link DIR-2680 User Manual 174
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
Version 1.00
2019/03/12
User Manual
DIR-2680
D-Fend AC2600 Wi-Fi Router