D-Link DE 850 Installation Guide
D-Link DE 850 - Transceiver - External Manual
 |
UPC - 790069200472
View all D-Link DE 850 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DE 850 manual content summary:
- D-Link DE 850 | Installation Guide - Page 1
D-Link Ethernet Transceiver Installation Guide Model DE-850 Piercing Tap Third Edition (March 25, 1993) Document No. M-DE850-3 - D-Link DE 850 | Installation Guide - Page 2
This installation guide tells you how to install the D-Link piercing tap Ethernet transceiver model DE-850 for the thick cable. The D-Link Ethernet transceiver is an IEEE 802.3 Attachment Unit Interface (AUI) that provides connection from a host to the network trunk cable through a 15-pin D-type - D-Link DE 850 | Installation Guide - Page 3
beat" function, set the switch to "Disabled" so that the transceiver will not send any SQE to the host. 4 SQE Disable sa 00 / SQE switch 2 DE-850 Transceiver - D-Link DE 850 | Installation Guide - Page 4
Connect Thick Coaxial Cable to Transceiver Connect the thick coaxial cable to the transceiver as illustrated below. 0 Remove screws on cover. Then, pull to remove tap. DE-850 Transceiver 3 - D-Link DE 850 | Installation Guide - Page 5
Braid terminator 7 Place braid terminator in tap body. 4 DE-850 Transceiver - D-Link DE 850 | Installation Guide - Page 6
Thick coaxial cable Thick coaxial cable u Place cable in tap body, then tighten screw. Thick coaxial cable 0 Probe assembly Use tool to thread probe assembly into tap body. DE-850 Transceiver 5 - D-Link DE 850 | Installation Guide - Page 7
0 ) es Place tap back in transceiver body and secure it with screws. 6 DE-650 Transceiver - D-Link DE 850 | Installation Guide - Page 8
Connect Transceiver to Host A transceiver cable is used to connect the transceiver to the host. After connecting to the host, if the power of the host is ON, the Power LED on the transceiver should illuminate. Thick coaxial cable Transceiver cable DE-850 Transceiver To host 7 - D-Link DE 850 | Installation Guide - Page 9
Specifications • IEEE 802.3 standard Attachment Unit Interface (AUI) • Connector supported: 1 15-pin D-type connector for connection to host • Connectable cable: 0.4 " LED indicator • Operating temperature: 0 - 55 C (standard operating) • Humidity: 10 - 90% (non-condensing) 8 DE-850 Transceiver
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
D
-Link
Ethernet
Transceiver
Installation
Guide
Model
DE
-850
Piercing
Tap
Third
Edition
(March
25,
1993)
Document
No.
M-DE850-3