D-Link DCS-900W Product Manual

D-Link DCS-900W - Wireless Internet Camera Manual

Get D-Link DCS-900W - Wireless Internet Camera PDF manuals and user guides
UPC - 588888888885
View all D-Link DCS-900W manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DCS-900W manual content summary:

  • D-Link DCS-900W | Product Manual - Page 1
    DCS-900W Internet Camera Manual Version 1.40 Building Networks for People (10/04/04)
  • D-Link DCS-900W | Product Manual - Page 2
    9 Security 10 Using the Setup Wizard 11 DCS-900W Configuration 17 Installing the DCS-900W Behind a Router 27 IPView Lite Application Installation 41 IPView Lite 46 Uninstall IPView Lite Application 78 Appendix (FAQ, Troubleshooting, How to Ping Your IP Address Time Zone Table, Active
  • D-Link DCS-900W | Product Manual - Page 3
    Package Contents Package Contents: One DCS-900W Internet Camera One Installation CD-ROM One 802.11b Antenna One AC power adapter One Camera Stand One Category 5 Ethernet Cable If any of the above items are missing, please contact your reseller. System Requirements: Local Area Network: 10Base-T
  • D-Link DCS-900W | Product Manual - Page 4
    as PC frame grabber cards. The DCS-900W supports both ActiveX mode for Internet Explorer and Java mode for Internet Explorer and Netscape Navigator. All that is required is a computer with current Web browser software. Supports a Variety of Platforms Supporting TCP/IP networking, HTTP, and other
  • D-Link DCS-900W | Product Manual - Page 5
    the Internet Camera directly from its own Web page via the Intranet or Internet. This means you can access your DCS-900W at updating firmware, viewing up to 4 cameras on one screen, and taking snapshots. Broad Range of Applications With today's high-speed Internet services, the Internet Camera
  • D-Link DCS-900W | Product Manual - Page 6
    continuously for three seconds or when the Power LED begins to light up. Release the reset button and the Power LED will begin to flash indicating that the DCS-900W's settings are reverting back to the factory settings. The IP address will also return to the default setting of 192.168.0.20. 6
  • D-Link DCS-900W | Product Manual - Page 7
    Connections (continued) Bottom Panel view Stand Mount 7
  • D-Link DCS-900W | Product Manual - Page 8
    is positioned on the right side of the DCS-900W lens. Steady green confirms that the DCS-900W is powered ON. Note: There are three settings for the Power LED for monitoring purposes: Normal / Off / Dummy. Please refer to the DCS-900W Camera Configuration section on P. 24 for detailed information and
  • D-Link DCS-900W | Product Manual - Page 9
    Hardware Installation Attach the Antenna Locate the antenna included with your DCS-900W and attach it to the antenna connector located on the back of the DCS-900W. Attach the Swivel Stand Locate the stand mount on the bottom of the DCS900W and screw on the swivel stand. Connect the Ethernet Cable
  • D-Link DCS-900W | Product Manual - Page 10
    the Administrator set the Admin ID and Admin Password to constrain user access to the DCS-900W since the Default settings are Null String (no password). Once the ID and Password are defined, only the Administrator has access to the management of the DCS-900W. This procedure should be done as soon as
  • D-Link DCS-900W | Product Manual - Page 11
    Using the Setup Wizard Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the D-Link DCS-900W CD into your CD-ROM drive. Click Install Software Click Install Wizard Click Next 11
  • D-Link DCS-900W | Product Manual - Page 12
    Using the Setup Wizard (continued) Click Yes Click Next Click Finish 12
  • D-Link DCS-900W | Product Manual - Page 13
    ) To run the Setup Wizard, click on Start->Programs->DCS-900W Series Setup Wizard. Your camera's IP Address will be displayed here if it is valid. Click Wizard to begin You must change the Admin ID and Password immediately to protect your camera against unauthorized access. By default, the Admin ID
  • D-Link DCS-900W | Product Manual - Page 14
    Using the Setup Wizard (continued) The IP Address, Subnet Mask of your camera, Gateway, and DNS addresses must correspond with your network settings for you to access the camera. If you are unsure of what these settings should be, please check with your network administrator. Click Next The
  • D-Link DCS-900W | Product Manual - Page 15
    Using the Setup Wizard (continued) If you need to make any changes, click Back to modify your camera settings. Otherwise, click Restart to save and apply your settings. Your setup is now complete! Click Link to launch your Web browser and view your images. Click Link Your camera is now displayed in
  • D-Link DCS-900W | Product Manual - Page 16
    not correspond with your local area network settings. You must assign an IP address for your camera that corresponds to your network's IP addressing scheme. Click Yes By default, the Admin ID and Password are blank. If you are running this Setup Wizard for the first time, leave both Admin ID and
  • D-Link DCS-900W | Product Manual - Page 17
    IP address that you assigned to your DCS-900W. Home Screen After the camera's IP address is entered in the Browser, the DCS-900W Home screen will appear with a still image from your camera. There will be three options to choose from to set up and view your Internet Camera: ƒ ActiveX ƒ Java ƒ Setup
  • D-Link DCS-900W | Product Manual - Page 18
    continued) Configuration Click on Setup from the Home screen to access the settings required for the DCS900W. There will be several options in the Configuration page to choose from to setup your DCS-900W and they are as follows: Advanced • System • Video Tools • Admin • Time • Default Status Help 18
  • D-Link DCS-900W | Product Manual - Page 19
    Configuration (continued) Advanced > System The System menu allows you to configure and set up your DCS-900W for operation. If you already set up your camera using the Setup Wizard, you may view/change your settings here. To access the System menu, click on the Advanced Tab in the menu bar, then
  • D-Link DCS-900W | Product Manual - Page 20
    for the camera. The default setting for the Camera Name is DCS-900W. The maximum length is 32 characters (Printable ASCII). Location: This field is used for entering a descriptive name for the location used by the DCS900W. IP Assignment: Important Information Access to the Internet Camera is gained
  • D-Link DCS-900W | Product Manual - Page 21
    application requires direct connection from an ADSL modem through the DCS900W's RJ-45 LAN port and you also have an ISP PPPoE account, click on PPPoE and enter the Service Name, User ID and Password into the respective fields. The DCS-900W will get an IP Address from the ISP each time it starts up
  • D-Link DCS-900W | Product Manual - Page 22
    Internet service that translates domain names (ie. www.dlink.com) into IP Addresses (ie. 192.168.0.20). The DNS IP Address can be obtained from your ISP. Dynamic DNS The DCS-900W supports Dynamic DNS which means that you can obtain and assign an easy to remember static address for your camera like
  • D-Link DCS-900W | Product Manual - Page 23
    DCS-900W Configuration (continued) Advanced > System Wireless Interface: Connection Mode: Use the Connection Mode to determine the type of wireless communication for the Internet Camera. There are three choices: Infrastructure mode, 802.11 Adhoc mode and Adhoc mode. The default setting for the
  • D-Link DCS-900W | Product Manual - Page 24
    DCS-900W Configuration (continued) Advanced > System HEX input format HEX format interprets match the encryption code used by the Internet Camera in either Infrastructure mode or Ad-hoc mode. By default, an Encryption key is not assigned to the DCS-1000W. Therefore, to secure the wireless
  • D-Link DCS-900W | Product Manual - Page 25
    's DNS server. Instructions for installing ActiveX from the driver CD is included in this manual. Please refer to the Appendix. Open Second Port: The Open Second Port option is used when multiple cameras are being installed on a network OR if you need to use a port other than the default Port 80. If
  • D-Link DCS-900W | Product Manual - Page 26
    Configuration (continued) Advanced > System Note: If you are installing multiple DCS-900W and wish to use the default 192.168.0.20 address, remember to assign this address to the LAST camera that you plan to install to avoid conflict of IP Address. IMPORTANT: You MUST also set up your router/gateway
  • D-Link DCS-900W | Product Manual - Page 27
    Installing the DCS-900W Behind a Router Single Camera Installation If you are installing a single camera on your network the installation is an easy 4-step procedure: 1) Identify Your Camera on the Network 2) Assign a Local IP Address for Your Camera 3) Determine Your Router's WAN IP Address (Enable
  • D-Link DCS-900W | Product Manual - Page 28
    default camera IP Address of 192.168.0.20. If you wish to use a different IP Address, be sure that the camera settings correspond to your network settings. The Default Gateway will be the IP Address of your router's Local IP Address(i.e.192.168.0.1 if you are using a DLink router) Enter a valid IP
  • D-Link DCS-900W | Product Manual - Page 29
    Behind a Router Assigning and opening second port in the DCS-900W ( For Installing Multiple Cameras) Opening ports will allow users to view the camera via the Internet. The ports that are opened must be unique for each camera in order to successfully view the images remotely. 3) Open Second Port
  • D-Link DCS-900W | Product Manual - Page 30
    Configuration (continued) Installing the DCS-900W Behind a Router ROUTER SET-UP AND INSTALLATION The following steps generally apply to any router that you have on your network. The D-Link DI-614+ is used as an example to clarify the configuration process. Your WAN IP Address information will be
  • D-Link DCS-900W | Product Manual - Page 31
    proceed as follows: • Select Enabled to enable virtual server settings. • Select a camera name. • Enter your camera's Local IP Address in the Private IP field. • Select TCP under Protocol Type. • If you are using the default camera port settings, enter 80 in to the Public and Private Port section
  • D-Link DCS-900W | Product Manual - Page 32
    the DCS-900W Behind manual for specific instructions on how to forward ports. Viewing Your Camera After all settings have been entered correctly, a user inside or outside your network will have access to the camera through a standard Web browser. To access from the Internet, simply type in the IP
  • D-Link DCS-900W | Product Manual - Page 33
    DCS-900W Configuration (continued) Advanced > Video The Video menu allows you to control and adjust the image settings for your DCS900W. Click on with higher video quality. The default setting is Medium. Frame Rate: Select the frame rate desired. Use the default setting of Auto for optimal results
  • D-Link DCS-900W | Product Manual - Page 34
    to monitor the DCS-900W from a remote site. Click on Tools, then Admin in the left hand panel to access the Admin menu. Enter the Admin Password with a maximum length of 8 (Printable ASCII) characters. To confirm the Admin Password, type in your password again. 34 The default setting for Admin
  • D-Link DCS-900W | Product Manual - Page 35
    , however each user name must be different. Each user name can be used as a group. For example, if the Username is Guest and the User Password is Guest, anyone can access the DCS-900W using this information. The maximum length for the User Name is 12 characters (Printable ASCII). User
  • D-Link DCS-900W | Product Manual - Page 36
    or Set Manually. Click on Time in the left hand panel and this screen will appear as illustrated below: DateTime: Select Synchronized with Time Server and the time will be based on the GMT setting. This is the default setting for the DCS-900W. Using a time server with your camera is recommended
  • D-Link DCS-900W | Product Manual - Page 37
    DCS-900W Configuration (continued) Tools > Time Protocol: Two options are available for linking with the Time Server. The default setting is in the respective field manually. When Set Manually is selected, each time the DCS-900W is powered off, the time must be reset manually at reboot. Apply/Cancel
  • D-Link DCS-900W | Product Manual - Page 38
    a Factory Reset! Status The Status menu displays information about your DCS-900W. Click on Status and the Information screen will appear as illustrated below: The Information table provides detailed information about the DCS-900W such as the Model Name, Firmware Version, Mac Address, and IP Address
  • D-Link DCS-900W | Product Manual - Page 39
    field is changed in the Web Configuration settings under Advanced > System. Date/Time - The date/time of the DCS-900W will be displayed according to your time server settings or from settings you have made manually. Note: Please refer to the Appendix for instructions on how to install ActiveX. 39
  • D-Link DCS-900W | Product Manual - Page 40
    DCS-900W Configuration (continued) Java Click on Java from the Home screen to access the video images from the Internet Explorer or Netscape browser as illustrated below: Camera Name - The Camera name will be displayed when the Camera Name field is changed in the Web Configuration setting under
  • D-Link DCS-900W | Product Manual - Page 41
    to hard drive, and configure advanced settings for the DCS-900W. IPView Lite is a complete software management tool for the DCS-900W and includes all configurable settings available in the web configuration utility. Insert the CD-ROM into the CD-ROM drive. A menu screen will appear as shown below
  • D-Link DCS-900W | Product Manual - Page 42
    IPView Lite Application Installation (continued) Click Next Click Yes Click Next 42
  • D-Link DCS-900W | Product Manual - Page 43
    IPView Lite Application Installation (continued) Click Next If your sound card or video card has not passed Windows Logo testing, this window will appear. Click Continue Anyway If there are previously installed target files that are newer than the source files, do NOT overwrite them. Click No 43
  • D-Link DCS-900W | Product Manual - Page 44
    installing the IPView Lite, the application program for the DCS900W is automatically installed to \Programs\IPViewLite Directory. To start running the IPView Lite click on windows Start > Programs > IPViewLite > IPViewLite. Enter the default User Name: admin into the respective field and click
  • D-Link DCS-900W | Product Manual - Page 45
    IPView Lite Application Installation (continued) Once logged in, the IPView Lite application is executed and the IPView Lite interface will appear in the default List View format: 45
  • D-Link DCS-900W | Product Manual - Page 46
    User Interface with detailed procedures for using the application. IPView Lite IPView Lite allows you to manage your cameras by enabling you to search, configure and preview all the DCS-900Ws from one location. It is designed with a user-friendly interface for ease of control and navigation. List
  • D-Link DCS-900W | Product Manual - Page 47
    IPView Lite is used for the first time, it is highly recommended that the Administrator change the User Name and Password for security purposes. Once the User Name and Password are defined, only the Administrator has access to the management of IPView Lite applications. This procedure should be done
  • D-Link DCS-900W | Product Manual - Page 48
    IPView Lite (continued) How to Change the IP Address Changing the IP Address To change an IP Address for a camera, select Camera > Add. An Add Camera dialog box will appear (see below). Click on Browse. The Browse Camera dialog box will appear with a blank screen (see below). 48
  • D-Link DCS-900W | Product Manual - Page 49
    you will be prompted to enter your admin ID and password before IPView Lite will allow you to change the IP Address for the DCS-900W. Enter the new IP Address, the Subnet Mask and the Default gateway into the respective fields and click OK. IPView Lite will apply the new IP Address to the camera. 49
  • D-Link DCS-900W | Product Manual - Page 50
    by a colon, then the port number that is assigned to your camera, i.e. 10.10.10.80:800, where 10.10.10.80 is your router's WAN IP and :800 is the port that your camera is using. Please refer to the DCS-900W Configuration, Installation Behind a Router section of this manual for details on P.27. 50
  • D-Link DCS-900W | Product Manual - Page 51
    will automatically be added into the IPView Lite list view. Alternatively, you can double-click on the camera you wish to add and the Add Camera dialog box will appear once again with the IP Address entered. Click on Add, and the camera will automatically be added into the IPView Lite list view. 51
  • D-Link DCS-900W | Product Manual - Page 52
    appears, make sure to enter the correct Username and Password. Click OK. The camera will be added into IPView Lite, in list format. If the Username and Password are entered incorrectly, the camera will not be added into IPView Lite. The Login Camera dialog box will appear only if your have already
  • D-Link DCS-900W | Product Manual - Page 53
    below.) The icon on the upper left corner of the screen will appear with the camera number that is being displayed. To return to the IPView Lite list view, right List and the viewing image will return to the list view format. A maximum of 4 cameras can be viewed simultaneously with IPView Lite. 53
  • D-Link DCS-900W | Product Manual - Page 54
    > Snap shot. A Save Image dialog box will appear for you to save the snap shot picture. Alternatively, select from the viewing mode either 1 or 4 cameras. Click on the icon located on the upper left corner of the screen. A case sensitive menu will appear. Select the Snap shot icon. A Save Image
  • D-Link DCS-900W | Product Manual - Page 55
    > Start. An AVI file will appear in your IPView Lite folder to save the recorded videos. Alternatively, in the viewing mode (using either 1 or 4 cameras), right-click on the icon located on the upper left corner of the screen. A case sensitive menu will appear. Select the Start icon. An AVI
  • D-Link DCS-900W | Product Manual - Page 56
    firmware. The Camera Property dialog box will appear. Select the desired options from the tab selections to configure the camera. General Allows settings for the camera name, location and administrator information such as administrator ID and password. Please refer to the DCS-900W Configuration
  • D-Link DCS-900W | Product Manual - Page 57
    IPView Lite (continued) Camera Property Settings > IP Assignment IP Assignment If you need to change your IP Address, select the IP Address tab in the Camera property window. There are two options: Manually Assign or Assign Automatically Using. Please refer to theDCS-900W Configuration section:
  • D-Link DCS-900W | Product Manual - Page 58
    IPView Lite (continued) Camera Property Settings > DNS DNS DNS (Domain Name System) server is an Internet service that translates domain names into IP Addresses. Please refer to the DCS-900W Configuration section under Advanced - System on P.19 for further details. 58
  • D-Link DCS-900W | Product Manual - Page 59
    IPView Lite (continued) Camera Property Settings > Wireless Wireless Your camera's wireless settings must correspond to your network settings for a proper and successful connection to the DCS-900W. Please refer to the DCS-900W Configuration section under Advanced- System on P.19 for further details.
  • D-Link DCS-900W | Product Manual - Page 60
    section under Advanced- System on P.19 for further details. Image Brightness, contrast, hue, resolution, compression, frame rate, and light frequency can be adjusted for your camera. Please refer to the DCS-900W Configuration section under Advanced - Video on P.33 for further details. 60
  • D-Link DCS-900W | Product Manual - Page 61
    Property Settings > Users Users Set up user accounts with user name and password for camera access. Please refer to the DCS-900W Configuration Setting under Tools-Admin on P.34 for more detailed information. To add a user click on the Add icon and the Add User dialog box
  • D-Link DCS-900W | Product Manual - Page 62
    IPView Lite (continued) Camera Property Settings > Date/Time Date/Time Set the camera's time and date to provide correct time information for remote users by selecting Synchronized with Time Server or Set Manually. Please refer to the DCS-900W Configuration section under Tools-Time on P.36 for
  • D-Link DCS-900W | Product Manual - Page 63
    IPView Lite (continued) Camera Property Settings > Information Information Displays information about the camera such as the model, firmware version, MAC address, and IP address. Please refer to the DCS-900W Configuration section under Status on P.38 for further details. 63
  • D-Link DCS-900W | Product Manual - Page 64
    Property Settings > Tools Tools Reset the camera and update firmware in this section. Please refer to the DCS-900W Configuration section under Tools-Default on P.38 for further details. Upgrade Firmware Enter the full path of the firmware binary file name in the Update Firmware field or you can
  • D-Link DCS-900W | Product Manual - Page 65
    (continued) Camera Property Settings > Recording Recording Options Manual Recording If the Manual Recording option is chosen, you must manually start recording in the List view of the DCS-900W in the Menu Bar or by clicking on the Record Icon. Choose Round the Clock to enable the DCS-900W to record
  • D-Link DCS-900W | Product Manual - Page 66
    By Date and enter in the dates, Start, and Stop Times. The camera will start to record according to the specified date and time period entered. the time period. Larger files will be generated if Round-the-Clock Manual Recording is chosen. The Dynamic Recording option records more video frames based
  • D-Link DCS-900W | Product Manual - Page 67
    (continued) Camera Property Settings > Recording Motion Trigger Recording The Motion Trigger Recording option can be used to record based on motion. The DCS-900W will begin to record any time it detects motion. Click on Sensitivity Setting to set the sensitivity levels for the DCS-900W. Moving the
  • D-Link DCS-900W | Product Manual - Page 68
    continued) Camera Property click OK to exit this screen. Note: If you are using Windows Media Viewer to view your recorded videos, make sure that you have date version in order to view the videos correctly. File Path The software will create a folder in the Recording File Path specified and record
  • D-Link DCS-900W | Product Manual - Page 69
    functions can be accessed from the menu bar. Menu Bar > File . New > Opens a new camera list. Cameras must then be added to the list for configuration Open > Opens saved camera lists. Save/Save As > Saves your current list of cameras and configurations. Exit > Exits the IPView Lite Application. 69
  • D-Link DCS-900W | Product Manual - Page 70
    Lite (continued) Menu Bar > View View on the menu bar provides users with management capabilities for Columns, List, Camera and Refresh. You can view the Camera in 1 Camera or 4 Camera mode. The View menu bar is pictured below. Columns When Columns is launched, a dialog box will appear displaying
  • D-Link DCS-900W | Product Manual - Page 71
    name, IP Address, user name, and location, will be displayed in the list view. Note: Right click on any camera to bring up a menu of actions you can apply to the selected camera. Double-clicking on the desired camera will bring up the Property dialog box. You can click the Refresh icon to update the
  • D-Link DCS-900W | Product Manual - Page 72
    on the menu bar provides options to manage the camera. Add up to 4 additional Cameras for viewing. The Camera menu also allows you to Delete a camera, manage the Property, Enable real-time video capture, or take a Snap shot image. Enable Function By default, the video image is enabled. There will be
  • D-Link DCS-900W | Product Manual - Page 73
    The account menu is for administrators to change user name and password. System Configuration T. his menu allows you to set overwrite options Lite. It is highly recommended that you select this option to save your camera settings in IPView Lite. In order to allow old video files to be overwritten
  • D-Link DCS-900W | Product Manual - Page 74
    IPView Lite (continued) Menu Bar > Tools overwritten. You can specify between 300MB to 10GB hard drive reserve space. If you reserve 1000MB and you have 3000MB of hard drive space, recording will recycle once the 2000MB limit is reached. Click on By Time to overwrite old files with new files once
  • D-Link DCS-900W | Product Manual - Page 75
    is normally used on a network to more efficiently manage Internet traffic for groups of users. If you are not sure how your LAN connects to the Internet, contact your system administrator. Menu Bar > About Under About on the menu bar, click About for camera details such as software version. 75
  • D-Link DCS-900W | Product Manual - Page 76
    hot key is Del. Property setting to configure the camera. The hot key is F2. Snap shot to capture a single still image. The hot key is F5. Options to modify the User Name and Password for IPView Lite. The hot key is F10. Start recording video image. Alternatively the hot key is
  • D-Link DCS-900W | Product Manual - Page 77
    IPView Lite (continued) Context Sensitive Menu In List View format, highlight a camera and right-click to bring up a context sensitive menu for features such as Add, be available: Enable, Rotate Right, Rotate Left, Snap Shot, Start, Stop, List, 1 Camera or 4 Cameras, Previous Page and Next Page. 77
  • D-Link DCS-900W | Product Manual - Page 78
    Uninstall IPView Lite Application Click on windows Start Menu / Programs / IPView / Uninstall IPView Lite. A new prompt screen will be displayed like the one below confirming the removal. Choose the option that you
  • D-Link DCS-900W | Product Manual - Page 79
    Uninstall IPView Application (continued) The InstallShield Wizard prompt will appear. Click Finish to complete the uninstallation procedure. 79
  • D-Link DCS-900W | Product Manual - Page 80
    application supplied with the Internet Camera CD-ROM. You may also use the first page that shows up when you type in the IP Address of the camera. When viewing this page, press the "refresh" button on your web browser to update the image. Please refer to the User's Guide for detailed information. 80
  • D-Link DCS-900W | Product Manual - Page 81
    as well. Troubleshooting Q: I cannot access the Internet Camera from a web browser. A1: The possible cause might be the IP Address for the Internet Camera is already being used by another device. To correct the possible problem, you need to first disconnect the Internet Camera from the network
  • D-Link DCS-900W | Product Manual - Page 82
    Troubleshooting (continued) Internet Camera Installation Q: Why does the Power LED not light up constantly? A: The power supply used might be at fault. Confirm that you are using the provided power supply, which is DC 5V, for the Internet Camera and verify that the power supply is well connected.
  • D-Link DCS-900W | Product Manual - Page 83
    using Windows XP, please make sure that you have downloaded Java and installed it properly. A3: Make sure that your Web browser supports Java. If you are using Internet Explorer or Netscape Navigator with a version number of lower than 5, then you will need to upgrade your Web browser software in
  • D-Link DCS-900W | Product Manual - Page 84
    for a reply. It is a very useful tool to confirm if the IP Address of the Internet Camera is a valid IP address over the network. Follow the step-by-step procedure below to utilize the PING command. Start a DOS window Start>Program>Accessories>Command Prompt Type ping x.x.x.x, where x.x.x.x is the
  • D-Link DCS-900W | Product Manual - Page 85
    A successful connection to the camera will be indicated by 4 reply statements (above). If you fail to connect to your camera you will see the following: 2) Check to see if you have entered your camera's IP Address correctly and reassign your camera's IP Address to a valid IP address of the network
  • D-Link DCS-900W | Product Manual - Page 86
    Time Zone Table GMT stands for Greenwich Mean Time, which is the global time that all time zones are measured from. 86
  • D-Link DCS-900W | Product Manual - Page 87
    Time Zone Table (continued) 87
  • D-Link DCS-900W | Product Manual - Page 88
    install the Xplug Control application to the Web Server for Internet Explorer 5.0. It must be installed to a Public Domain with a Fixed IP Address. 1. Installation: Copy the "xplug.ocx" file , you should now be able to access the Internet Camera from the web browser by selecting ActiveX mode. 88
  • D-Link DCS-900W | Product Manual - Page 89
    Installation of the X-Plug to a Local PC (continued) Insert the CD-ROM into the CD-ROM drive to initiate the auto-run program. Once completed, a menu screen will appear as follows: Click Install Software. To install Xplug Control click on the "Xplug Control" button to activate the installation
  • D-Link DCS-900W | Product Manual - Page 90
    Installation of the X-Plug to a Local PC (continued) Click Next Click Yes 90
  • D-Link DCS-900W | Product Manual - Page 91
    of the X-Plug to a Local PC (continued) Click Finish Adjusting the Camera Focus To help you get the best image quality, keep in mind that while adjusting the DCS-900W focus you can preview the image quality from your Web browser. Camera Lens Adjust by turning clockwise or counter-clockwise 91
  • D-Link DCS-900W | Product Manual - Page 92
    . Warning Direct exposure to sunlight may cause permanent damage to the CMOS sensor. Therefore do not expose the Internet Camera's lens directly to sunlight. The Internet Camera is designed for indoor usage and if your application requires prolonged exposure to sunlight, a sun visor is recommended
  • D-Link DCS-900W | Product Manual - Page 93
    Technical Specifications Video specification Resolution: Sensor: Gain control: Exposure: White Balance: Shutter: Minimum Illumination: Focal Length: Aperture: 640 x 480 pixel 1/3" color CMOS sensor Automatic Automatic Automatic Electronics 1/60 ~ 1/15000 sec [email protected], 3000K color 6.0 mm F=1.8
  • D-Link DCS-900W | Product Manual - Page 94
    / Off / Dummy) DC 5V/2.5A, switching type 4.5 Watt (900mA x 5V) Communication Support Communication: Communication protocol: 10/100Mbps Ethernet and Fast Ethernet or 802.11b Wireless HTTP, TCP/IP, UDP, ARP, ICMP, BOOTP, RARP, DHCP, PPPoE Web Configuration Requirements: • Internet Explorer 5.0 or
  • D-Link DCS-900W | Product Manual - Page 95
    to Friday 7:30am to 12:00am EST D-Link Technical Support over the Internet: http://support.dlink.ca email:[email protected] When contacting technical support, please provide the following information: • Serial number of the unit • Model number or product name • Software type and version number 95
  • D-Link DCS-900W | Product Manual - Page 96
    to refund at D-Link's sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement to the terms and conditions of the license granted by D-Link for the Software. Software will be warranted for the remainder of the original Warranty
  • D-Link DCS-900W | Product Manual - Page 97
    agrees to pay D-Link's reasonable handling and manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than DLink
  • D-Link DCS-900W | Product Manual - Page 98
    DLINK'S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there
  • D-Link DCS-900W | Product Manual - Page 99
    Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. 99
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
DCS-900W
Internet Camera
Building Networks for People
(10/04/04)
Manual
Version 1.40