D-Link DCS-6004L User Manual

D-Link DCS-6004L Manual

Get D-Link DCS-6004L PDF manuals and user guides View all D-Link DCS-6004L manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DCS-6004L manual content summary:

  • D-Link DCS-6004L | User Manual - Page 1
    Version 1.00 | 11/26/2013 User Manual HD PoE/Wireless Mini Dome Network Camera DCS-6004L/DCS-6005L
  • D-Link DCS-6004L | User Manual - Page 2
    as our services and websites develop and change. Please refer to the www.mydlink.com website for the most current information. Revision 1.0 Manual Revisions Date October 25, 2013 Description DCS-6004L/DCS-6005L Revision A1 with firmware version 1.00 Trademarks D-Link and the D-Link logo are
  • D-Link DCS-6004L | User Manual - Page 3
    Preset 33 Motion Detection 35 Time and Date 37 Event Setup 38 SD Card 46 ICR 47 HTTPS 48 Access List 49 Maintenance 50 Device Management 50 System 52 Firmware Upgrade 53 Status 54 Device Info 54 Logs 55 Help 56 Technical Specifications 57 D-Link DCS-6004L/DCS-6005L User Manual 3
  • D-Link DCS-6004L | User Manual - Page 4
    Overview Package Contents DCS-6004L/DCS-6005L HD PoE/Wireless Mini Dome Network Camera CAT5 Ethernet Cable Power Adapter Camera Accessories (Audio extension cable, female Ethernet connector, and mounting alignment guide) CD-ROM with User Manual and Software Quick Installation Guide If any of
  • D-Link DCS-6004L | User Manual - Page 5
    with Java installed and enabled • Existing 10/100 Ethernet-based network or 802.11n wireless network • A MicroSD memory card (optional) is required for recording to onboard storage. SDHC Class 6 or above is recommended. • Broadband Internet connection D-Link DCS-6004L/DCS-6005L User Manual 5
  • D-Link DCS-6004L | User Manual - Page 6
    features include image monitoring, recording images to a hard drive, viewing up to 32 cameras on one screen, and taking snapshots. IR LED for Day and Night Functionality The built-in infrared LEDs enables night time viewing of up to 16 feet (5 meters). D-Link DCS-6004L/DCS-6005L User Manual 6
  • D-Link DCS-6004L | User Manual - Page 7
    2 microSD Card Slot Used to add storage for recording 3 Status LED Indicates the camera's current status 4 WPS LED Indicates the current status of WPS 5 WPS Button Used to initialize WPS mode on the camera 6 Camera Sensor HD-capable CMOS sensor D-Link DCS-6004L/DCS-6005L User Manual 7
  • D-Link DCS-6004L | User Manual - Page 8
    Minimize the number of walls and ceilings between your adapter and other network devices (such as your Network Camera) - each wall or ceiling can reduce your adapter's range from 3-90 feet (1-30 meters). 2. transmits a signal even if the phone in not in use. D-Link DCS-6004L/DCS-6005L User Manual 8
  • D-Link DCS-6004L | User Manual - Page 9
    installation process from connecting your hardware to configuring your camera and registering it with your mydlink account. Note: If the Autorun program does not open, go to My Computer, browse to your CD drive, and double-click on the autorun.exe file. D-Link DCS-6004L/DCS-6005L User Manual 9
  • D-Link DCS-6004L | User Manual - Page 10
    connecting your hardware to configuring your camera and registering it with your mydlink account. Note: mydlink Web portal requires JavaTM to function correctly. For more guidelines, please refer to mydlink FAQ pages at https://www.mydlink.com/faq/mydlink D-Link DCS-6004L/DCS-6005L User Manual 10
  • D-Link DCS-6004L | User Manual - Page 11
    or power strip. Reattach the Camera Housing Reattach the camera housing by lining up the housing so that the access port on the housing matches the access port on the camera base. Firmly push down until the camera housing snaps back onto the camera base. D-Link DCS-6004L/DCS-6005L User Manual 11
  • D-Link DCS-6004L | User Manual - Page 12
    With the D-Link logo facing you, reattach the camera to the mounting plate by sliding the camera towards you until it locks into position. 4 5. Adjust the angle of the camera as desired, then tighten the collar on the camera stem to lock it in place. 5 D-Link DCS-6004L/DCS-6005L User Manual 12
  • D-Link DCS-6004L | User Manual - Page 13
    on the housing 6 matches the access port on the camera base. Firmly push down until the camera housing snaps back onto the camera base. 7. Refer to "Mounting the Camera" on page 12 to learn how to correctly mount the camera to its permenant location. D-Link DCS-6004L/DCS-6005L User Manual 13
  • D-Link DCS-6004L | User Manual - Page 14
    similar to the following: For more details on using your camera with mydlink, go to the Support section of the mydlink website and check the User Manual section for your product to find the latest instruction guide for your camera's mydlink features. D-Link DCS-6004L/DCS-6005L User Manual 14
  • D-Link DCS-6004L | User Manual - Page 15
    of your camera into a web browser, such as Mozilla Firefox. To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your password, click OK. D-Link DCS-6004L/DCS-6005L User Manual 15
  • D-Link DCS-6004L | User Manual - Page 16
    (FOV) of the camera. The red box indicates the visible region of interest (ROI). Language: You may select the interface language using this menu. Go To: If any presets have been defined, selecting a preset from this list will (Preset List) display it. D-Link DCS-6004L/DCS-6005L User Manual 16
  • D-Link DCS-6004L | User Manual - Page 17
    page 23. To quickly configure your Network Camera's motion detection settings, click Motion Detection Setup Wizard. If you want to enter your settings without running the wizard, click Manual Motion Detection Setup and skip to"Motion Detection" on page 35. D-Link DCS-6004L/DCS-6005L User Manual 17
  • D-Link DCS-6004L | User Manual - Page 18
    Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the Internet. Click Next to continue. Note: Select DHCP if you are unsure of which settings to choose. Click Next to continue. D-Link DCS-6004L/DCS-6005L User Manual
  • D-Link DCS-6004L | User Manual - Page 19
    password, otherwise click Next to continue. If you have a Dynamic DNS account and would like the camera to update your IP address automatically, select Enable DDNS and enter your host information. Click Next to continue. Enter a name for your camera and click Next to continue. D-Link DCS-6004L/DCS
  • D-Link DCS-6004L | User Manual - Page 20
    Click Next to continue. If you have selected DHCP, you will see a summary of your settings, including the camera's IP address. Please write down all of this information as you will need it in order to access your camera. Click Apply to save your settings. D-Link DCS-6004L/DCS-6005L User Manual 20
  • D-Link DCS-6004L | User Manual - Page 21
    configure motion detection. Click Next to continue. Step 2 This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record whenever motion is detected. Click Next to continue. D-Link DCS-6004L/DCS-6005L User Manual 21
  • D-Link DCS-6004L | User Manual - Page 22
    you will receive event notifications from your camera. You may choose not to receive notifications Motion Detection Wizard. Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-6004L/DCS-6005L User Manual
  • D-Link DCS-6004L | User Manual - Page 23
    a different subnet. Invalid gateway settings may cause the failure of transmissions to a different subnet. Primary DNS: The primary domain name server translates names to IP addresses. Secondary DNS: The secondary DNS acts as a backup to the primary DNS. D-Link DCS-6004L/DCS-6005L User Manual 23
  • D-Link DCS-6004L | User Manual - Page 24
    . For instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1. sdp where the x.x.x.x represents the ip address of your camera. Enable CoS: Enabling the Class of Service setting implements a best-effort policy without making any bandwidth reservations. D-Link DCS-6004L/DCS-6005L User Manual 24
  • D-Link DCS-6004L | User Manual - Page 25
    override the QoS settings of the camera. Enable IPV6: Enable the IPV6 setting to use the IPV6 protocol. Enabling the option allows you to manually set up the address, specify an optional IP address, specify an optional router and an optional primary DNS. D-Link DCS-6004L/DCS-6005L User Manual 25
  • D-Link DCS-6004L | User Manual - Page 26
    Enable Multicast The DCS-6004L/DCS-6005L allows you to multicast for stream each of the available streams via group address and specify the TTL value for each stream. Enter the port and TTL settings you wish to use if you do not want to use the defaults. D-Link DCS-6004L/DCS-6005L User Manual
  • D-Link DCS-6004L | User Manual - Page 27
    Section 4: Configuration Wireless Setup (DCS-6005L Only) This section allows you to set up and configure the wireless settings on your camera. After making any changes, click , enter the Key (also known as password) used for your wireless network. D-Link DCS-6004L/DCS-6005L User Manual 27
  • D-Link DCS-6004L | User Manual - Page 28
    used to connect to your DDNS account. Password: Enter the password used to connect to your DDNS server account. Timeout: Enter the DNS timeout values you wish to use. Status: Indicates the connection status, which is automatically determined by the system. D-Link DCS-6004L/DCS-6005L User Manual 28
  • D-Link DCS-6004L | User Manual - Page 29
    over the camera image to draw a mask area. Right clicking on the camera image brings up the following menu options: Disable All: Disables all mask areas Enable All: Enables all mask areas Reset All: Clears Auto, Outdoor, Indoor, Flourescent and Push Hold. D-Link DCS-6004L/DCS-6005L User Manual 29
  • D-Link DCS-6004L | User Manual - Page 30
    Changes the exposure mode. Use the drop-down box to set the camera for Auto, Indoor, Outdoor, Night Environments, or to Moving to how much sharpening to apply to the image. Reset Default: Click this button to reset the image to factory default settings. D-Link DCS-6004L/DCS-6005L User Manual 30
  • D-Link DCS-6004L | User Manual - Page 31
    you may also configure the two-way audio settings for your camera. After making any changes, click the Save Settings button to motion for rate: videos, and requires more bandwidth. Lower frame rates will result in stuttering motion, and requires less bandwidth. D-Link DCS-6004L/DCS-6005L User Manual
  • D-Link DCS-6004L | User Manual - Page 32
    of the video recorded rate: by the camera. Higher bit rates result in higher video quality. Fixed quality: Select the image quality level for the camera to try to maintain. High quality levels will to volume level: outgoing audio to increase its volume. D-Link DCS-6004L/DCS-6005L User Manual 32
  • D-Link DCS-6004L | User Manual - Page 33
    box to see a list of all the presets that have been created. You can select one, then click the GoTo button to change the displayed camera view to the preset. Clicking the Remove button will delete the currently selected preset. D-Link DCS-6004L/DCS-6005L User Manual 33
  • D-Link DCS-6004L | User Manual - Page 34
    drop-down box at the bottom of this window, set the Dwell time to determine how long the camera view will stay at that preset, then click the Add button. The preset name will appear in the from the list, enter a new dwell time, then click the Update button. D-Link DCS-6004L/DCS-6005L User Manual 34
  • D-Link DCS-6004L | User Manual - Page 35
    indicate motion. Please enter a value between 0 and 100. Percentage: Specifies the amount of motion in the window being monitored that is required to initiate an alert. If this is set to 100%, motion is detected within the whole window will trigger a snapshot. D-Link DCS-6004L/DCS-6005L User Manual
  • D-Link DCS-6004L | User Manual - Page 36
    , or Snapshot should also be selected. Enable Sound Select this box to enable the sound detection Detection: feature of your camera. Time: Specify the day and hours the more sensitive the camera will be to sound. Click Save Settings to save your changes. D-Link DCS-6004L/DCS-6005L User Manual 36
  • D-Link DCS-6004L | User Manual - Page 37
    DCS-6004L/DCS-6005L with an Internet time server. Choose the one that is closest to your location. Set the Date and This option allows you to set the time and date Time Manually: manually. Copy Your This will synchronize the time information from Computer's Time your PC. Settings: D-Link DCS-6004L
  • D-Link DCS-6004L | User Manual - Page 38
    (where to send) ex. Email, FTP To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what action shall be performed when a trigger is activated. D-Link DCS-6004L/DCS-6005L User Manual 38
  • D-Link DCS-6004L | User Manual - Page 39
    Section 4: Configuration The Event Setup page includes 4 different sections. • Server • Media • Event • Recording 1. To add a new item - "event, server or media," click or media, click Delete. 3. Click on the item name in the drop-down menu for modifying. D-Link DCS-6004L/DCS-6005L User Manual 39
  • D-Link DCS-6004L | User Manual - Page 40
    e-mail server account. FTP: Enter the configuration for the target FTP server account. Network Specify a network storage device. Only one network Storage: storage device is supported. SD Card: Use the camera's onboard SD card storage. D-Link DCS-6004L/DCS-6005L User Manual 40
  • D-Link DCS-6004L | User Manual - Page 41
    will be added on the file name. Add date and Check it to add timing information as file name time suffix to file suffix. name: D-Link DCS-6004L/DCS-6005L User Manual 41
  • D-Link DCS-6004L | User Manual - Page 42
    filename of saved video clips. System log: Select this option to set the media type to system logs. This will save the event to the camera system log, but will not record any snapshots or video. D-Link DCS-6004L/DCS-6005L User Manual 42
  • D-Link DCS-6004L | User Manual - Page 43
    save your changes. Event name: Enter a name for the event. Enable this Select this box to activate this event. event: Priority: Set of motion detection and digital input trigger. Trigger: Specify the input type that triggers the event. Video Motion Motion is Link DCS-6004L/DCS-6005L User Manual 43
  • D-Link DCS-6004L | User Manual - Page 44
    to save your changes. Recording entry The unique name of the entry. name: Enable this Select this to enable the recording function. recording: Priority: Set the priority for this entry. The entry : Select the folder where the recording file will be stored. D-Link DCS-6004L/DCS-6005L User Manual 44
  • D-Link DCS-6004L | User Manual - Page 45
    example, if each recording file is 6MB, and the total cyclical recording size is 600MB, then the camera will record 100 files in the specified location (folder) and will then delete the oldest file and be added on the file name of the recording file(s). D-Link DCS-6004L/DCS-6005L User Manual 45
  • D-Link DCS-6004L | User Manual - Page 46
    not available or not formatted correctly, you camera will display the screen to the right. If you insert a new SD card, : Video link and choose the video file you would like to view. Refresh: Reloads the file and folder information from the SD card. D-Link DCS-6004L/DCS-6005L User Manual 46
  • D-Link DCS-6004L | User Manual - Page 47
    . Day Mode: Day mode enables the IR Cut Filter. Night Mode: Night mode disables the IR Cut Filter. Schedule Mode: Set up the Day/Night mode using a schedule. The camera will enter Day mode at the starting time and return to Night mode at the ending time. D-Link DCS-6004L/DCS-6005L User Manual 47
  • D-Link DCS-6004L | User Manual - Page 48
    access to your camera. After making any changes, click the Save Settings button to save your changes. Enable Enable the HTTPS service. HTTPS Secure the HTTPS is still enabled. To remove the certificate, you must first uncheck Enable HTTPS secure connection. D-Link DCS-6004L/DCS-6005L User Manual 48
  • D-Link DCS-6004L | User Manual - Page 49
    set from 1.1.1.0 to 192.255.255.255 and the range of the Denied List is set from 1.1.1.0 to 170.255.255.255. Only users with IPs located between 171.0.0.0 and 192.255.255.255 can access the Network Camera. Alowed List Denied List D-Link DCS-6004L/DCS-6005L User Manual 49
  • D-Link DCS-6004L | User Manual - Page 50
    Enable OSD: Select this option to enable the On-Screen Display feature for your camera. Label: Enter a label for the camera, which will be shown on the OSD when it is enabled. Show Time: Select this option to enable the time-stamp display on the video screen. D-Link DCS-6004L/DCS-6005L User Manual
  • D-Link DCS-6004L | User Manual - Page 51
    Section 4: Configuration LED: You may specify whether or not to illuminate the status LED on the camera. D-Link DCS-6004L/DCS-6005L User Manual 51
  • D-Link DCS-6004L | User Manual - Page 52
    need to set up your camera again. Reboot Device: Clicking the Reboot button will reboot your device. Schedule Select this option to schedule a time for the device Reboot: to reboot. After making any changes, click the Save button to save your changes. D-Link DCS-6004L/DCS-6005L User Manual 52
  • D-Link DCS-6004L | User Manual - Page 53
    The camera's current firmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available firmware version. To upgrade the firmware on your DCS-6004L/DCS-6005L, please download and save the latest firmware version from the D-Link Support Page
  • D-Link DCS-6004L | User Manual - Page 54
    Section 4: Configuration Status Device Info This page displays detailed information about your device and its network connection. D-Link DCS-6004L/DCS-6005L User Manual 54
  • D-Link DCS-6004L | User Manual - Page 55
    Section 4: Configuration Logs This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-6004L/DCS-6005L User Manual 55
  • D-Link DCS-6004L | User Manual - Page 56
    Section 4: Configuration Help This page provides helpful information regarding camera operation. D-Link DCS-6004L/DCS-6005L User Manual 56
  • D-Link DCS-6004L | User Manual - Page 57
    up to 30 fps recording1 ƒƒ AAC: 64kbps ƒƒ MicroSD/SDHC card slot2 ƒƒ HTTP / HTTPS ƒƒ Samba client ƒƒ PPPoE ƒƒ UPnP port forwarding ƒƒ RTP / RTSP/ RTCP ƒƒ IP filtering ƒƒ QoS ƒƒ CoS ƒƒ Multicast ƒƒ IGMP ƒƒ ONVIF compliant ƒƒ HTTP and RTSP authentication D-Link DCS-6004L/DCS-6005L User Manual 57
  • D-Link DCS-6004L | User Manual - Page 58
    ƒƒ Protocol: Standard TCP/IP ƒƒ Supports all management functions in web interface ƒƒ Scheduled motion triggered, or manual recording options ƒƒ DCS-6005L: 135g (Without Stand) External Power Adaptor Power Consumption ƒƒ Input: 100 to 240 V AC, 50/60 Hz ƒƒ DCS-6004L: 3.5 watts max. Temperature
  • D-Link DCS-6004L | User Manual - Page 59
    HD Wireless Mini Dome Network Camera Black Exterior Casing White Exterior Casing 1 Frame rates when streaming video may vary depending on network conditions and method used. 2 A SDHC Class 6 card or above is recommended. Supports card capacities up to 32GB. D-Link DCS-6004L/DCS-6005L User Manual
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
User Manual
HD PoE/Wireless Mini Dome Network Camera
Version 1.00 | 11/26/2013
DCS-6004L/DCS-6005L