D-Link DCS-3511 User Manual
D-Link DCS-3511 Manual
 |
View all D-Link DCS-3511 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DCS-3511 manual content summary:
- D-Link DCS-3511 | User Manual - Page 1
Version 1.20 | 10/16/2015 User Manual DCS-3511 HD PoE Network Camera DCS-3511 - D-Link DCS-3511 | User Manual - Page 2
herein are trademarks or registered trademarks of their respective companies. Copyright © 2015 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. D-Link DCS-3511 User Manual 2 - D-Link DCS-3511 | User Manual - Page 3
Storage 64 PTZ Control 65 Digital PTZ 65 Mechanical PTZ 66 System 67 User Settings 67 Device Settings 68 Time and Date 69 Maintenance 70 D-Link DCS-3511 User Manual 3 - D-Link DCS-3511 | User Manual - Page 4
Parameter List 72 Logs 73 Appendix A - Technical Specifications 74 Technical Specifications 74 D-Link DCS-3511 User Manual 4 - D-Link DCS-3511 | User Manual - Page 5
Manual and Software on CD-ROM Accessory Wrench, lens ring fixture, I/O connectors Quick Install Guide CAT5 Ethernet Cable Video Cable *Depending on your region, a power adapter may not be included. If any of the above items are missing, please contact your reseller. D-Link DCS-3511 User Manual - D-Link DCS-3511 | User Manual - Page 6
plus processor with 512MB memory and a 32MB video card is required for multiple camera viewing and recording in IP surveillance program) ƒƒ An available Ethernet connection D-Link DCS-3511 User Manual 6 - D-Link DCS-3511 | User Manual - Page 7
most detail of the video which is useful to identify any suspected object. DCS-3511 provide multiple streaming and flexible viewing window settings for different purpose of surveillance, premises where cameras are located, further simplifying the management process. D-Link DCS-3511 User Manual 7 - D-Link DCS-3511 | User Manual - Page 8
" can also simulate wide area surveillance by digital zoom and pan, tilt control. Flexible Connectivity The DCS-3511 incorporates Power over Ethernet (PoE), allowing it to be easily installed in a variety of locations without the need for supplemental power cabling. D-Link DCS-3511 User Manual 8 - D-Link DCS-3511 | User Manual - Page 9
Product Overview Hardware Overview Front Panel D-Link DCS-3511 User Manual ICR Sensor The IR-Cut Removable sensor judges lighting conditions and switches from color to infrared accordingly 9 - D-Link DCS-3511 | User Manual - Page 10
Product Overview LED Power and network indicator Rear Panel DC Power 12V DC 12V 1.5A RESET ETHERNET (PoE) AUDIO IN/OUT Reset Press and hold this button for 10 for Ethernet which can also be used to power the camera using PoE (PoE only available on the DCS-3511) D-Link DCS-3511 User Manual 10 - D-Link DCS-3511 | User Manual - Page 11
Product Overview Side Panel microSD Card Slot Local microSD card for storing recorded images and video D-Link DCS-3511 User Manual DC-Iris Connector Connector for DC iris lens Focus Manually adjust focus Focal Length Manually adjust the focal length 11 - D-Link DCS-3511 | User Manual - Page 12
Product Overview Wire Clip Cable management Button Panel Built-in MIC Internal microphone I/O Connector I/O connectors for external devices Mounting Nut 1/4' x 20 nut for affixing camera to mounting bracket D-Link DCS-3511 User Manual 12 - D-Link DCS-3511 | User Manual - Page 13
power has been established, the LED will turn red. When the device has obtained an IP address and is accessible, the LED will turn green. D-Link DCS-3511 User Manual 13 - D-Link DCS-3511 | User Manual - Page 14
of your CD-ROM drive. Click Setup Wizard to begin the installation. After clicking Setup Wizard, the following window will open. Click Next to continue. D-Link DCS-3511 User Manual 14 - D-Link DCS-3511 | User Manual - Page 15
Installation Click Yes to accept the License Agreement. To start the installation process, click Next. Note: The installation may take several minutes to finish. D-Link DCS-3511 User Manual 15 - D-Link DCS-3511 | User Manual - Page 16
Installation Click Finish to complete the installation. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE D-Link DCS-3511 User Manual 16 - D-Link DCS-3511 | User Manual - Page 17
logging in for the first time, the default Admin ID is admin with the password left blank. Click Next, to proceed to the next page. D-Link DCS-3511 User Manual 17 - D-Link DCS-3511 | User Manual - Page 18
same IP address each time it is started. Click Next, to proceed to the next page. Take a moment to confirm your settings and click Restart. D-Link DCS-3511 User Manual 18 - D-Link DCS-3511 | User Manual - Page 19
SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Select the camera and click the button labeled "Link" to access the web configuration. The Setup Wizard will automatically open your web browser to the IP address of the camera. D-Link DCS-3511 User Manual 19 - D-Link DCS-3511 | User Manual - Page 20
's live video. You can select your video profile and view or operate the camera. For additional information about web configuration, please refer to the user manual included on the CD-ROM or the D-Link website. D-Link DCS-3511 User Manual 20 - D-Link DCS-3511 | User Manual - Page 21
D-ViewCam Setup Wizard D-ViewCam software is included for the administrator to manage multiple D-Link IP cameras remotely. You may use the software to configure all the advanced settings will appear as shown below. Follow the Installation Wizard to install D-ViewCam. D-Link DCS-3511 User Manual 21 - D-Link DCS-3511 | User Manual - Page 22
Installation Click Finish to complete the installation. To start D-ViewCam, select Start > All Programs > D-Link D-ViewCam > Main Console. For more information about D-ViewCam, please refer to the documentation on the D-ViewCam CD-ROM. D-Link DCS-3511 User Manual 22 - D-Link DCS-3511 | User Manual - Page 23
functions using the icons on the screen. Please refer to the tables on the following pages for detailed information about the icons on this screen. D-Link DCS-3511 User Manual 23 - D-Link DCS-3511 | User Manual - Page 24
for entry-level users. Click this button to turn the digital output device on or off. This camera supports multiple streams (stream 1 ~ 4) simultaneously. You may select one for live viewing. Click on this item video stream, please refer to Video settings on page 31. D-Link DCS-3511 User Manual 24 - D-Link DCS-3511 | User Manual - Page 25
Configuration PTZ Control ePT Direction Focus Zoom Patrol Auto Pan Go Preset Speed Control This camera supports both "digital" (e-PTZ) and "mechanical" pan/tilt/ zoom control. Please refer to Speed Control Digital PTZ Control Panel Mechanical PTZ Control Panel D-Link DCS-3511 User Manual 25 - D-Link DCS-3511 | User Manual - Page 26
50% 25%: Keep the video zoom ratio at 25% Help Click the Help button to learn the detailed information regarding camera setup and solve any problems you encounter. D-Link DCS-3511 User Manual 26 - D-Link DCS-3511 | User Manual - Page 27
in milliseconds. The buffer will cause a slight delay between live activity and the video of the live stream but may increase the quality of video. D-Link DCS-3511 User Manual 27 - D-Link DCS-3511 | User Manual - Page 28
Settings Event Management - Motion Detection, Tamper Detection, DI and DO PTZ Control - Digital PTZ, Mechanical PTZ. System - User Settings, Device Settings, Time and Date, Maintenance D-Link DCS-3511 User Manual 28 - D-Link DCS-3511 | User Manual - Page 29
, Event Settings Recording - Recording Settings, Local Storage PTZ Control - Digtal PTZ, Mechanical PTZ System - User Settings, Device Settings, Time and Date, Maintenance, Parameter List, Logs D-Link DCS-3511 User Manual 29 - D-Link DCS-3511 | User Manual - Page 30
Configuration System Overview The system overview page contains a summary of the camera's current settings. For more information about adjusting these settings, please consult the subsequent instructions found in this manual. D-Link DCS-3511 User Manual 30 - D-Link DCS-3511 | User Manual - Page 31
rate to optimize the bandwidth utilization and video quality. Video Options Viewing Window: The camera supports multiple streams with frame size ranging from 176x144 to 1280x800. Click Viewing Window to open the "Output Frame Rate" (size of the live view window). D-Link DCS-3511 User Manual 31 - D-Link DCS-3511 | User Manual - Page 32
applied mode: Day mode, Night mode, or schedule mode. Please manually enter a range of time if you choose Schedule mode. 3. Configure Exposure setting Configure Image setting in the third column. 4. Click Save to enable the setting and click Close to exit the page. D-Link DCS-3511 User Manual 32 - D-Link DCS-3511 | User Manual - Page 33
quality: To optimize the bandwidth utilization and video quality. The video quality can be adjusted to the following setting: Medium, Standard, Good, Detailed and Excellent. D-Link DCS-3511 User Manual 33 - D-Link DCS-3511 | User Manual - Page 34
setting defaults to Auto and works well in most situations. • Fixed: Follow the steps below to manually set the white balance to compensate for the ambient lighting conditions 1. Set the White balance to : Adjust the image brightness level, which ranges from -5 to +5 D-Link DCS-3511 User Manual 34 - D-Link DCS-3511 | User Manual - Page 35
on the same screen. • If you want to delete the privacy mask window, please click the 'x' at the upper right-hand corner of the window. D-Link DCS-3511 User Manual 35 - D-Link DCS-3511 | User Manual - Page 36
: Select an G711 bit rate from the drop-down list. Higher bit rate means higher audio quality but it takes more network bandwidth to transmit. D-Link DCS-3511 User Manual 36 - D-Link DCS-3511 | User Manual - Page 37
time of day mode are set to 06:00 and 18:00. Light Sensor Sensitivity: Select Low, Normal, or High sensitivity for the light sensor. D-Link DCS-3511 User Manual 37 - D-Link DCS-3511 | User Manual - Page 38
the database of computer name and IP address. Secondary WINS Server: The secondary WINS server that maintains the database of computer name and IP address. D-Link DCS-3511 User Manual (DHCP) 38 - D-Link DCS-3511 | User Manual - Page 39
a LAN. To utilize this feature, make sure that your router supports UPnP and it is activated. How does UPnP work? UPnP networking dynamic discovery of devices added to a network. Services and capabilities offered by networked devices, such as the LAN environment. D-Link DCS-3511 User Manual 39 - D-Link DCS-3511 | User Manual - Page 40
Configuration D-Link DCS-3511 User Manual 40 - D-Link DCS-3511 | User Manual - Page 41
to 80 and the secondary HTTP port is set to 8080. You can login camera as example link as below: Http://192.168.0.20 or Http://192.168.0.20:8080 Authentication: Depending on your access. Access name for stream 1 ~ 4: This Network Camera supports multiple streams D-Link DCS-3511 User Manual 41 - D-Link DCS-3511 | User Manual - Page 42
Camera supports multiple streams simultaneously. The access name is used to differentiate the streaming source. If you want to use an RTSP player to access the Network Camera, you have to set the video mode to H.264 / MPEG-4 and use the following RTSP URL command to D-Link DCS-3511 User Manual 42 - D-Link DCS-3511 | User Manual - Page 43
will change accordingly. Multicast TTL [1~255]: The multicast TTL (Time To Live) is the value that tells the router the range a packet can be forwarded. D-Link DCS-3511 User Manual 43 - D-Link DCS-3511 | User Manual - Page 44
Dynamic DNS This section explains how to configure the dynamic domain name service for the camera. DDNS is a service that allows your camera, especially when assigned with a dynamic IP address : Indicate the connection status, automatically determined by the system. D-Link DCS-3511 User Manual 44 - D-Link DCS-3511 | User Manual - Page 45
. 2. The Certificate Information will automatically be displayed in the third column as shown below. You can click Property to see detailed information about the certificate. D-Link DCS-3511 User Manual 45 - D-Link DCS-3511 | User Manual - Page 46
one. To remove the signed certificate, deselect Enable HTTPS secure connection in the first column and click Save. Then click Remove to erase the certificate. D-Link DCS-3511 User Manual 46 - D-Link DCS-3511 | User Manual - Page 47
. The user name will be displayed in the User ID column. If the administrator allows client to link to the webpage without a user name and password, the User ID column will be empty. There Streaming. • Refresh: Click this button to refresh all current connections. D-Link DCS-3511 User Manual 47 - D-Link DCS-3511 | User Manual - Page 48
. Please note that the selected connections will only be disconnected temporarily and will automatically try to re-link again (IE Explore or Quick Time Player). If you want to enable the denied list, please make sure the Administrator can always connect to the device. D-Link DCS-3511 User Manual 48 - D-Link DCS-3511 | User Manual - Page 49
devices. It helps network administrators to remotely manage network devices and find, solve network problems with ease. The SNMP consists of the following three key components: 1. Manager: this function if your network environment uses IEEE 802.1x which is a port- D-Link DCS-3511 User Manual 49 - D-Link DCS-3511 | User Manual - Page 50
switch/access point/hub, and RADIUS server must support and enable 802.1x setting. The 802.1x Service) Quality of Service refers to a resource reservation control mechanism, which guarantees a certain quality to different services on the network. Quality of service D-Link DCS-3511 User Manual 50 - D-Link DCS-3511 | User Manual - Page 51
• All network switches and routers in the network must include support for QoS. • The network video devices used in the network the CoS setting is incorrect. • Class of Service technologies do not guarantee a level of service in terms of bandwidth and delivery time. They Link DCS-3511 User Manual 51 - D-Link DCS-3511 | User Manual - Page 52
network. Quality of service guarantees are important if the network capacity is insufficient, especially for real-time streaming multimedia applications. Quality can be defined as, for instance, a maintained level of bit rate, low latency, no packet dropping, etc. D-Link DCS-3511 User Manual 52 - D-Link DCS-3511 | User Manual - Page 53
: You can configure two sets of sensor setting: one for normal situations(Profile1), the other for special situations(Profile2), such as day/night/schedule mode. D-Link DCS-3511 User Manual 53 - D-Link DCS-3511 | User Manual - Page 54
> Server Settings (how to send alarm message)/ Media Settings (send what type of alarm message)/Event Settings/. Please refer to Event settings for detailed information. D-Link DCS-3511 User Manual 54 - D-Link DCS-3511 | User Manual - Page 55
of external alarm devices to the camera such as IR-Sensors and alarm relays. Once triggered images will be taken and e-mailed. DI/DO Schematics D-Link DCS-3511 User Manual 55 - D-Link DCS-3511 | User Manual - Page 56
if necessary. • Server port: The default mail server port is set to 25. You can also manually set another port. If your SMTP server requires a secure connection (SSL), select This server requires a secure Enter the domain name or IP address of the FTP server. D-Link DCS-3511 User Manual 56 - D-Link DCS-3511 | User Manual - Page 57
: Most firewalls do not accept new connections initiated from external requests. If the FTP server supports passive mode, select this option to enable passive mode FTP and allow data transmission to pass is activated. A total of 5 media settings can be configured. D-Link DCS-3511 User Manual 57 - D-Link DCS-3511 | User Manual - Page 58
temporarily holds data up to a certain limit. Enter a number to decide the duration of recording before a trigger is activated. Up to 9 seconds can be set. D-Link DCS-3511 User Manual 58 - D-Link DCS-3511 | User Manual - Page 59
arrange three elements -- Trigger, Schedule, and Action to set an event. A total of 3 event settings can be configured. Event name: Enter a name for the event. D-Link DCS-3511 User Manual 59 - D-Link DCS-3511 | User Manual - Page 60
display the detailed configuration options. The input type that triggers the event. Video motion detection: This option makes use of the built-in motion detection D-Link DCS-3511 User Manual 60 - D-Link DCS-3511 | User Manual - Page 61
take (i.e. the server to send the media files to) when a trigger is activated. • Add Server: same as Server Settings • Add Media: same as Media Settings D-Link DCS-3511 User Manual 61 - D-Link DCS-3511 | User Manual - Page 62
larger than the reserved amount for cyclic recording. File name prefix: Enter the text that will be appended to the front of the file name. D-Link DCS-3511 User Manual 62 - D-Link DCS-3511 | User Manual - Page 63
drop-down list on the recording page. To remove a recording setting from the list, select a recording name from the drop-down list and click Delete. D-Link DCS-3511 User Manual 63 - D-Link DCS-3511 | User Manual - Page 64
Results column. File attributes: Select one or more items as your search criteria. Trigger time: Manually enter the time range you want to search. Click Search and the recorded data corresponding to the and down arrow to sort the search results in either direction. D-Link DCS-3511 User Manual 64 - D-Link DCS-3511 | User Manual - Page 65
the Source list. 3. Set the Dwelling time for the preset location during auto patrol. You can also manually enter a value in the blank and click Update. 4. Repeat step 1 and 3 to select additional to rearrange the patrol order. 7. Click Save to enable the setting. D-Link DCS-3511 User Manual 65 - D-Link DCS-3511 | User Manual - Page 66
. PTZ Driver: The camera supports Pelco D & P protocol PTZ driver. If your PTZ scanner does not support above driver, please select Custom camera (scanner). Please refer to the user's manual of your PTZ scanner to up to five custom commands for your PTZ scanner. D-Link DCS-3511 User Manual 66 - D-Link DCS-3511 | User Manual - Page 67
account. Privilege: Select the access rights for the new user. Manage user: Manage the accounts for existing users. Authentication: The access rights for existing users. D-Link DCS-3511 User Manual 67 - D-Link DCS-3511 | User Manual - Page 68
Configuration Device Settings Turn off the LED indicator: Select this option to turn off the LED next to the lens. This will prevent anyone from observing the operation of the network camera. Camera Name: Create a unique name for your camera. D-Link DCS-3511 User Manual 68 - D-Link DCS-3511 | User Manual - Page 69
Update Interval: The time interval for updating the time information from NTP server. Set the date and time manually: This option allows you to set the time and date manually. Copy Your Computer's Time Setting: This will synchronize the time information from your PC. D-Link DCS-3511 User Manual 69 - D-Link DCS-3511 | User Manual - Page 70
The following message will be displayed during the reboot process. If the connection fails after rebooting, manually enter the IP address of the camera in the address field to resume the connection. Restore to . Note: Do not power off the camera during the upgrade! D-Link DCS-3511 User Manual 70 - D-Link DCS-3511 | User Manual - Page 71
Follow the steps below to upgrade the firmware: 1. Download the latest firmware file from the D-Link website. The file is in .pkg file format. 2. Click Browse... and specify the firmware system now!! This connection will close". After that, re-access the camera. D-Link DCS-3511 User Manual 71 - D-Link DCS-3511 | User Manual - Page 72
Configuration Parameter List The Parameters List page lists the entire system's parameters in alphabetical order. If you need technical assistance, please provide the information listed on this page. D-Link DCS-3511 User Manual 72 - D-Link DCS-3511 | User Manual - Page 73
displays the system log in chronological order. The system log is stored in the camera's buffer area and will be overwritten when reaching a certain limit. D-Link DCS-3511 User Manual 73 - D-Link DCS-3511 | User Manual - Page 74
Appendix A - Technical Specifications Technical Specifications Camera Hardware Profile DCS-3511 ƒƒ 1/4" 1 Megapixel CMOS sensor ƒƒ 2.8~12mm fixed lens ƒƒ ƒƒ Multicast ƒƒ IGMP ƒƒ ONVIF compliant ƒƒ HTTP and RTSP digest encryption ƒƒ Remote client access control D-Link DCS-3511 User Manual 74 - D-Link DCS-3511 | User Manual - Page 75
of up to 32 cameras on one screen ƒƒ Scheduled motion triggered, or manual recording options ƒƒ Supports all management functions in web interface 200 g (0.44lb) 12V DC 1.5 A, 802.3af PoE (for DCS-3511 only) 2.4W (12V DC), 2.88W (PoE). ƒƒ Operating: 0 to 40 °C (32 to 104 °F) ƒƒ Operating: 20% to 80 - D-Link DCS-3511 | User Manual - Page 76
Appendix A - Technical Specifications Order Information Part Number DCS-3511 Description HD PoE Network Camera D-Link DCS-3511 User Manual 76
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
 |
 |
User Manual
DCS-3511 HD PoE Network Camera
DCS-3511
Version 1.20 | 10/16/2015