D-Link DCH-M225 Quick Install Guide
D-Link DCH-M225 Manual
 |
View all D-Link DCH-M225 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DCH-M225 manual content summary:
- D-Link DCH-M225 | Quick Install Guide - Page 1
or access point does not support WPS, follow the steps under Configure the DCH-M225 Using a Web Browser to connect to the DCH-M225 and run the Setup Wizard. If you are not sure how to enable WPS on your wireless router, please refer to your router user manual. A Range Extender only works as well as - D-Link DCH-M225 | Quick Install Guide - Page 2
extender. * Refer to the documentation of the app for more information. Visit http://support.dlink.com/DCH-M225 to download the user manual for more information. Troubleshooting Why can't I connect to my wireless router or my wireless connection drops? 1. Verify that the DCH-M225 is within range
-
1 -
2
 |
 |
DCH-M225
Wi-Fi Audio Extender
If any of the above items are missing, please contact your reseller.
Package Contents
Product Overview
Recommended Placement
LED
Color
Status
Description
Power/Status LED
Green
Solid
Successfully connected to a wireless router or AP.
Blinking
The device is processing a connection when the WPS
button is pushed.
Amber
Blinking
Not connected to a wireless router or access point.
Red
Solid
The device is booting up.
Blinking
The device is in recovery mode or the device has
malfunctioned.
Off
The device is not receiving power. Try a different
outlet.
Connect to Your Router Using WPS
Thank you for purchasing the DCH-M225 Wi-Fi Audio Extender. Follow
the easy steps in this guide to properly set up your extender.
1
Find an available outlet near your wireless router. Plug the
DCH-M225 in and wait until the LED is blinking amber.
2
Press the WPS button on your wireless router.
Within one minute, press the WPS button on the DCH-M225.
The LED will start to blink.
3
4
When the LED turns solid green, this indicates that the DCH-M225 is
securely connected to your wireless router or access point.
You can now unplug and move the DCH-M225 to a location
between your wireless router and the area that you need
wireless
coverage.
5
Power/Status LED
Wi-Fi Protected Setup
(WPS) Button
6
Your device is now connected to the DCH-M225 and can
connect to your wireless router. If you want to change your
network settings, password, etc., follow the steps under
Configure the DCH-M225 Using a Web Browser
to connect and
configure the DCH-M225. To connect additional devices,
repeat step 5.
Your setup is complete!
Before You Begin
• Make sure the area that you want to plug the extender into has a solid
connection to your router. Use a wireless laptop, tablet, or mobile phone
in that area to test the connection to verify.
• If your wireless router or access point does not support WPS, follow the
steps under
Configure the DCH-M225 Using a Web Browser
to connect
to the DCH-M225 and run the Setup Wizard. If you are not sure how
to enable WPS on your wireless router, please refer to your router user
manual.
Connect Your Wireless Devices
Poor
location
Ideal
location
!
!
!
A Range Extender only works as well as the signal it is extending.
Therefore, proper placement of your DCH-M225 is important in
achieving desired results.
For best performance, place your DCH-M225 in between your
router and your dead zone, making sure it’s placed in a location
where the signal is still strong.
Ideal Placement
Wireless
Router
Wireless
Router
Wi-Fi
Dead Zone
Audio Port
Reset Button
•
DCH-M225 Wi-Fi Audio Extender
• Wi-Fi Configuration Card
• Quick Install Guide
Extended network
Original network
From your wireless device go to the Wireless Utility to display
the available wireless networks.
The SSID on the DCH-M225 will automatically be assigned:
(Your Router’s SSID)-EXT
The Wi-Fi password for the DCH-M225 will be the same as
your router. Repeat step 5 to connect additional devices to
the DCH-M225.