D-Link DAP-3320 User Manual

D-Link DAP-3320 Manual

Get D-Link DAP-3320 PDF manuals and user guides View all D-Link DAP-3320 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DAP-3320 manual content summary:

  • D-Link DAP-3320 | User Manual - Page 1
  • D-Link DAP-3320 | User Manual - Page 2
    trademarks or registered trademarks of their respective companies. Copyright © 2016 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. D-Link DAP-3320 User Manual i
  • D-Link DAP-3320 | User Manual - Page 3
    32 Wireless Resource Control 34 Multi-SSID 36 VLAN 37 VLAN List 37 Port List 38 Add/Edit VLAN 39 PVID Setting 40 Intrusion 41 Schedule 42 Internal RADIUS Server 43 ARP Spoofing Prevention Settings 44 Bandwidth Optimization 45 AP Array 47 AP Array Scan 47 D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 4
    62 Current IP Mapping List 63 Filters 64 Wireless MAC ACL 64 WLAN Partition 65 Traffic Control 66 Uplink/Downlink Settings 66 QoS 67 Traffic Manager 68 Status 69 Device Information 69 Client Information 70 WDS Information 71 Channel Analyze 72 D-Link DAP-3320 User Manual Statistics 73
  • D-Link DAP-3320 | User Manual - Page 5
    ® 7 103 Troubleshooting 106 Wireless Basics 110 What is Wireless 111 Tips 113 Wireless Modes 114 Networking Basics 115 Check your IP address 115 Statically Assign an IP address 116 Technical Specifications 117 Antenna Pattern 119 Central WiFiManager 138 D-Link DAP-3320 User Manual iv
  • D-Link DAP-3320 | User Manual - Page 6
    Wall mounting bracket with mounting kit with two plastic mounting ties Quick Installation Guide Grounding Wire Note: A PoE Injector is not included with this Access Point. To power this device we suggest using a D-Link PoE Switch or a D-Link DPE-301GI PoE Injector. D-Link DAP-3320 User Manual 1
  • D-Link DAP-3320 | User Manual - Page 7
    Network Requirements • An Ethernet-based Network • IEEE 802.11n/g wireless clients (AP Mode) • IEEE 802.11n/g wireless network (AP Mode) Web-based Configuration Utility Requirements Computer with of Java installed. Visit www.java.com to download the latest version. D-Link DAP-3320 User Manual 2
  • D-Link DAP-3320 | User Manual - Page 8
    adapt to many situations. As a standard wireless Access Point (AP) the DAP-3320 can connect to a wide range of devices that are 802.11 n/g/b compliant. In WDS mode it can expand current wireless coverage without the need for a wired backbone link. As a wireless client it can connect to an existing
  • D-Link DAP-3320 | User Manual - Page 9
    operation modes - Capable of operating in one of four different operation modes to meet your wireless networking needs: Access Point, WDS with AP, WDS, and Wireless Client. • Power over Ethernet - The DAP-3320 supports IEEE 802.3af PoE (Power over Ethernet) which enables it to be supplied with power
  • D-Link DAP-3320 | User Manual - Page 10
    the reset button for at least 5 seconds to reset the device back to the 1 Reset button factory default settings. The LED will turn on for 2 seconds and then begin the reboot process. 2 LED A wire to help prevent device damage due to shorts and lightning strikes. D-Link DAP-3320 User Manual 5
  • D-Link DAP-3320 | User Manual - Page 11
    about local regulations. 2. This product is distributed through distributors and system installers with professional technicians and is not to be sold directly through retail stores. D-Link DAP-3320 User Manual 6
  • D-Link DAP-3320 | User Manual - Page 12
    when selecting your installation site, especially when there are electric power and phone lines. 3. When installing your access point, note the following: • Do not use a metal ladder. • Do not work on a wet as to whether your outdoor installation is properly grounded. D-Link DAP-3320 User Manual 7
  • D-Link DAP-3320 | User Manual - Page 13
    Section 2 - Installation Physical Installation Remove the bottom cover Lift the release tab in the middle of the cover, then pull the cover off. Connect an Ethernet cable Connect an Ethernet cable (not included) to the Ethernet port. D-Link DAP-3320 User Manual 8
  • D-Link DAP-3320 | User Manual - Page 14
    Section 2 - Installation Connect the grounding wire Use the grounding screw to attach the grounding wire. Reattach the bottom cover. You may need to break off one of the plastic port covers to allow your cables to exit the AP. D-Link DAP-3320 User Manual 9
  • D-Link DAP-3320 | User Manual - Page 15
    , or weatherproof container in severe weather environments. It is highly recommended that you configure and test your access point before mounting it. Mounting the AP to a Pole Thread the plastic mounting ties through the back of the DAP-3320 and around the pole. D-Link DAP-3320 User Manual 10
  • D-Link DAP-3320 | User Manual - Page 16
    Section 2 - Installation Mounting the AP to a Wall Screw the wall mounting bracket into the wall, then attach the DAP-3320 to it. For extra security, you can thread the plastic mounting ties through the back of the DAP-3320 and the wall mounting bracket as shown. D-Link DAP-3320 User Manual 11
  • D-Link DAP-3320 | User Manual - Page 17
    access point, you can use one of the following 2 methods: Method 1 - Powered by PoE Switch Method 2 - Powered by PoE Injector Method 1 - Powered by PoE Switch 1. Connect one end of your Ethernet cable into the LAN (PoE) port on the DAP-3320 and then connect the other end to your PoE switch. D-Link
  • D-Link DAP-3320 | User Manual - Page 18
    Ethernet cable into the P+DATA OUT port on the PoE injector and the other end into the LAN (PoE) port on the DAP-3320 access point. 3. Connect the supplied power adapter to the POWER IN connector on the PoE Injector. 4. Plug the power adapter into a power outlet. D-Link DAP-3320 User Manual 13
  • D-Link DAP-3320 | User Manual - Page 19
    Section 2 - Installation Wireless Installation Considerations The D-Link DAP-3320 Wireless PoE Outdoor Access point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness
  • D-Link DAP-3320 | User Manual - Page 20
    ) Access Point (AP) WDS with AP WDS Wireless Client Function Create a wireless LAN Wirelessly connect multiple networks while still functioning as a wireless AP Wirelessly connect multiple networks AP acts as a wireless network adapter for your Ethernet-enabled device D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 21
    will show you how to configure your new D-Link Wireless PoE Outdoor Access point using the web-based configuration utility. Web-based Configuration Utility If you wish to change the default settings or optimise the performance of the DAP-3320, you may use the webbased configuration utility. To
  • D-Link DAP-3320 | User Manual - Page 22
    Section 3 - Configuration After successfully logging into the DAP-3320, the following screen will appear: Save and Activate Settings When making changes on most of the click the Configuration button located at the top of the page and then click Save and Activate. D-Link DAP-3320 User Manual 17
  • D-Link DAP-3320 | User Manual - Page 23
    the channel, first toggle the Auto Channel Selection setting to Disable, and then use the drop-down menu to make the desired selection. Note: The wireless adapters will automatically scan and match the wireless settings. D-Link DAP-3320 User Manual 18
  • D-Link DAP-3320 | User Manual - Page 24
    : 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g wireless devices on your network. Authentication: Use the drop-down menu . Select 802.1x to secure your network using 802.1x authentication. D-Link DAP-3320 User Manual 19
  • D-Link DAP-3320 | User Manual - Page 25
    , the DAP-3320 wirelessly connects multiple networks while still functioning as a wireless AP. Wireless Select 2.4 Ghz from the drop-down menu. Band: Mode: WDS with AP mode is selected from the drop-down menu. The other three choices are Access Point, WDS, and wireless Client. Network Service Set
  • D-Link DAP-3320 | User Manual - Page 26
    to communicate the key across the network. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-3320 User Manual 21
  • D-Link DAP-3320 | User Manual - Page 27
    , the DAP-3320 wirelessly connects multiple networks, without functioning as a wireless AP. Wireless Select 2.4 Ghz from the drop-down menu. Band: Mode: WDS is selected from the drop-down menu. The other three choices are Access Point, WDS with AP, and wireless Client. Network Service Set Identifier
  • D-Link DAP-3320 | User Manual - Page 28
    to communicate the key across the network. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-3320 User Manual 23
  • D-Link DAP-3320 | User Manual - Page 29
    wireless settings.) Channel Indicates whether the device is capable of 20 MHz operation only or both Width: 20 MHz and 40 MHz operation. Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 30
    . This feature will allow you to change the MAC Clone Enable: address of the access point to the MAC address of a client. MAC Source: Select the MAC source from the drop-down menu. MAC Address: Enter the MAC address that you would like to assign to the access point. D-Link DAP-3320 User Manual 25
  • D-Link DAP-3320 | User Manual - Page 31
    wireless modes on the DAP-3320 support different types of wireless encryption security standards. Not every mode supports all types of encryption. Open System/Shared Key Authentication All wireless modes on the DAP-3320 support using numbers ranging from 0-127. D-Link DAP-3320 User Manual 26
  • D-Link DAP-3320 | User Manual - Page 32
    Personal Authentication can be enabled for Access Point, WDS with AP, WDS, and Wireless Client modes. WPA Mode: When default value Update: of 3600 is recommended. Select Manual to enter your key (PassPhrase). You can select Periodical Key Change to have the access point Link DAP-3320 User Manual 27
  • D-Link DAP-3320 | User Manual - Page 33
    Enterprise Authentication can only be enabled for Access Point mode. WPA Mode: When WPA-Enterprise Access Protection. Access Protection: RADIUS Enter the IP address of the RADIUS server. Server: RADIUS Enter the RADIUS port. Port: RADIUS Enter the RADIUS secret. Secret: D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 34
    during which the group key will be valid (300 is the Interval: recommended value). A lower interval may reduce data transfer rates. RADIUS Enter the IP address of the RADIUS server. Server: RADIUS Enter the RADIUS port. Port: RADIUS Enter the RADIUS secret. Secret: D-Link DAP-3320 User Manual 29
  • D-Link DAP-3320 | User Manual - Page 35
    in the network must share the same Mask: subnet mask. Default Enter the IP address of the gateway in your network. If there is a gateway in Gateway: your network, please enter an IP address within the range of your network. DNS: Enter the DNS IP address used here. D-Link DAP-3320 User Manual 30
  • D-Link DAP-3320 | User Manual - Page 36
    address manually. When Auto is selected, the other fields here will be grayed out. IP Address: Enter the LAN IPv6 address used here. Prefix: Enter the LAN subnet prefix length value used here. Default Enter the LAN default gateway IPv6 address used here. Gateway: D-Link DAP-3320 User Manual 31
  • D-Link DAP-3320 | User Manual - Page 37
    the wireless function On or Off. Wireless The different combination of clients that can be supported Beacons are packets sent by an access point to synchronize a Interval (25- wireless network. Specify a value in milliseconds. The default (100) is 500): recommended. Link DAP-3320 User Manual 32
  • D-Link DAP-3320 | User Manual - Page 38
    -lapping and causing interference, the Access Point will automatically change to 20 MHz. Transfer Enable to transfer the DHCP Offer to Unicast from LAN to WLAN, it is DHCP Offer recommended to enable this function if stations number is larger than 30. to Unicast : D-Link DAP-3320 User Manual 33
  • D-Link DAP-3320 | User Manual - Page 39
    specified wireless band. The default setting is 20. 11n Use the drop-down menu to Enable the 11n Preferred function. The wirePreferred: less clients with 802.11n protocol will have higher priority to connect to the device. Network Set the maximum utilization of this access point. The DAP-3320 will
  • D-Link DAP-3320 | User Manual - Page 40
    the wireless clients. ACL RSSI: Use the drop-down menu to Enable the function. When enabled, the device denies the connection request from the wireless clients with the RSSI lower than the specified threshold below. ACL RSSI Set the ACL RSSI Threshold. Threshold: D-Link DAP-3320 User Manual 35
  • D-Link DAP-3320 | User Manual - Page 41
    supports up to four multiple Service Set Identifiers. In the Basic > Wireless section, you can set the Primary SSID. The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless Select Enable or Disable. Multimedia): D-Link DAP-3320 User Manual 36
  • D-Link DAP-3320 | User Manual - Page 42
    DAP-3320 without a VLAN tag will have a VLAN tag inserted with a PVID. The VLAN List tab displays the current VLANs. VLAN Use the radio button to toggle between Enable or Disable. Next, go to the Status: Add/Edit VLAN tab to add or modify an item on the VLAN List tab. D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 43
    and internal networks on a Virtual LAN (VLAN), the switch and DHCP server you are using must also support VLANs. As a prerequisite step, configure a port on the switch for handling VLAN tagged packets as : The Port VLAN Identifier is displayed in this column. D-Link DAP-3320 User Manual 38
  • D-Link DAP-3320 | User Manual - Page 44
    to Enable. Status: VLAN ID: Provide an ID number between 1 and 4094 for the Internal VLAN. VLAN Enter the VLAN to add or modify. Name: D-Link DAP-3320 User Manual 39
  • D-Link DAP-3320 | User Manual - Page 45
    the radio button to toggle between Enable and Disable. PVID Auto Use the radio button to toggle PVID auto assign status to Enable. Assign Status: D-Link DAP-3320 User Manual 40
  • D-Link DAP-3320 | User Manual - Page 46
    Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes take effect. AP List: The choices include All, Valid, Neighbor, Rogue, and New. Detect: Click this button to initiate a scan of the network. D-Link DAP-3320
  • D-Link DAP-3320 | User Manual - Page 47
    the SSID the schedule will apply to from the drop-down menu. SSID: Enter the name of your wireless network (SSID). Day(s): Toggle the radio button between All Week and Select Day(s). If the second option List: Save: Click the Save button to save your created rules. D-Link DAP-3320 User Manual 42
  • D-Link DAP-3320 | User Manual - Page 48
    internal RADIUS server. Password: Enter a password to authenticate user access to the internal RADIUS server. The length of your password should be 8~64. Status: Toggle the drop-down menu between Enable and Disable. RADIUS Displays the list of users. Account List: D-Link DAP-3320 User Manual 43
  • D-Link DAP-3320 | User Manual - Page 49
    users to add IP/MAC address mapping to prevent ARP spoofing attacks. ARP This check box allows you to enable the ARP spoofing prevention function. Spoofing Prevention: Gateway Enter a gateway IP address. IP Address: Gateway Enter a gateway MAC address. MAC Address: D-Link DAP-3320 User Manual 44
  • D-Link DAP-3320 | User Manual - Page 50
    allows the user to manage the bandwidth of the access point and adjust the bandwidth for various wireless clients. After inputting a Bandwidth Optimization rule, click the will distribute different different BW bandwidth for 11 b/g/n clients. for b/g/n stations: D-Link DAP-3320 User Manual 45
  • D-Link DAP-3320 | User Manual - Page 51
    Index: Use the drop-down menu to select the SSID for the specified wireless band. Downlink Enter the downlink speed limit in either Kbits/sec or Mbits/sec for the rule. Speed: Uplink Enter the upload speed limit in either Kbits/sec or Mbits/sec for the rule. Speed: D-Link DAP-3320 User Manual 46
  • D-Link DAP-3320 | User Manual - Page 52
    current AP array status for the following parameters: List: Array Name, Master IP, MAC, Master, Backup Master, Slave, and Total. Current This table displays all the current array members. The DAP-3320 AP array Members: feature supports up to eight AP array members. D-Link DAP-3320 User Manual 47
  • D-Link DAP-3320 | User Manual - Page 53
    Configuration: Wireless Select this option to specify the basic wireless settings that the APs in the Basic group will inherit. Settings: Wireless Select this option to specify the advanced wireless settings settings that the APs in the Settings: group will inherit. D-Link DAP-3320 User Manual 48
  • D-Link DAP-3320 | User Manual - Page 54
    listed in the drop-down Threshold: menu in increments of 10% from 10% to 100%. RF Report Enter the RF report frequency value here. Frequency: D-Link DAP-3320 User Manual 49
  • D-Link DAP-3320 | User Manual - Page 55
    accept the changes made. Enable Load Select to Enable or Disable the load balance feature here. Balance: Active Enter the active threshold value here. Threshold: D-Link DAP-3320 User Manual 50
  • D-Link DAP-3320 | User Manual - Page 56
    admininstrators can configure the redirection website URL that each wireless client will be redirected to upon connection to the here. This value can be from 1 to 1440 timeout minutes. By default, this value is 60 minutes. (1-1440): Band: Select 2.4 Ghz. provided. D-Link DAP-3320 User Manual 51
  • D-Link DAP-3320 | User Manual - Page 57
    the Username and Password that each wireless client will be prompted for when requesting access to the network. Session Enter Username/Password, Passcode, Remote RADIUS, LDAP and POP3. Web Default is Disable or select Enable to enable the website redirection feature. D-Link DAP-3320 User Manual 52
  • D-Link DAP-3320 | User Manual - Page 58
    configure the Passcode that each wireless client will be prompted for when requesting access to the network. A passcode , Username/Password, Passcode, Remote RADIUS, LDAP and POP3. Web Default is Disable or select Enable to enable the website redirection feature. time D-Link DAP-3320 User Manual 53
  • D-Link DAP-3320 | User Manual - Page 59
    RADIUS, LDAP and POP3. Web Default is Disable or select Enable to IP address here Server: Radius Port: Enter the RADIUS server's port number here Radius Port: Enter the RADIUS server's shared secret here Remote Select the remote RADIUS server type here. Radius Type: D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 60
    are Type: Web Redirection, Username/Password, Passcode, Remote RADIUS, LDAP and POP3. Web Default is Disable or select Enable to enable the website redirection feature. Redirection State: URL Path username here. Password: Enter the LDAP server account's password here. D-Link DAP-3320 User Manual 55
  • D-Link DAP-3320 | User Manual - Page 61
    's full path string here. Alternatively, select the Auto Copy checkbox to automatically add the generic full path of the web page in the identity field. D-Link DAP-3320 User Manual 56
  • D-Link DAP-3320 | User Manual - Page 62
    , Passcode, Remote RADIUS, LDAP and POP3. Web Default is Disable or select Enable to enable the website IP address or domain name here. Port: Port: Enter the POP server's port number here. Connection Select the connection type here; either None or SSL/TLS. Type: D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 63
    the path can be manually entered here. from file: Login Page Select the wireless band and login style that will be used for each SSID. Style List: Click the Download button to download the login page template file and Click the Del button to delete the template file. D-Link DAP-3320 User Manual 58
  • D-Link DAP-3320 | User Manual - Page 64
    Mask: Upload IP To upload an IP filter list file, click Browse and navigate to the IP filter list Filter File: file saved on your computer, and then click Upload. Download To download IP Filter list file, click Download and to save the IP Filter list. IP Filter File: D-Link DAP-3320 User Manual 59
  • D-Link DAP-3320 | User Manual - Page 65
    is finished adjusting these settings, click the Save button to have the changes take effect. Wireless Select the wireless band for MAC Bypass. Band: SSID Index: Select the SSID for MAC Bypass. MAC Enter the MAC bypass list file. File to Local Hard Drive: D-Link DAP-3320 User Manual 60
  • D-Link DAP-3320 | User Manual - Page 66
    .dlink.com into IP addresses. Domain Enter the domain name of the network, if applicable. (An example of a Name: domain name is: www.dlink.com.) Lease Time : The lease time is the period of time before the DHCP server will assign new IP addresses. (60-31536000 sec) D-Link DAP-3320 User Manual 61
  • D-Link DAP-3320 | User Manual - Page 67
    a dynamically assigned IP address, if applicable. DNS: Enter the Domain Name System (DNS) server address for the wireless network. The DNS server translates domain names such as www.dlink.com into IP addresses. Domain Specify the domain name for the network. Name: D-Link DAP-3320 User Manual 62
  • D-Link DAP-3320 | User Manual - Page 68
    that is assigned an IP address from the DHCP dynamic pool. Binding The MAC address of a device on the network that is within the DHCP static MAC IP address pool. Address: Assigned IP The current corresponding DHCP-assigned static IP address of the device. Address: D-Link DAP-3320 User Manual 63
  • D-Link DAP-3320 | User Manual - Page 69
    an ACL list and upload it to the access point instead of manually entering the information. Once created, click the Browse button and locate your file. Select it and then click Upload. Download Click Download to export the ACL to a file on your computer. ACL File: D-Link DAP-3320 User Manual 64
  • D-Link DAP-3320 | User Manual - Page 70
    . Wireless devices can still send Access: data to the Ethernet port. Internal The default value is Enable, which allows stations to inter-communicate by Station connecting to a target AP. When disabled, wireless stations cannot exchange Connection: data through the AP. D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 71
    button to let your changes take effect. Downlink The downlink bandwidth in Mbits per second. Bandwidth: Uplink The uplink bandwidth in Mbits per second. Bandwidth: D-Link DAP-3320 User Manual 66
  • D-Link DAP-3320 | User Manual - Page 72
    de-prioritize streams that exhibit bulk transfer characteristics, such as file transfers, while leaving interactive traffic, such as gaming or VoIP, running at a normal priority. D-Link DAP-3320 User Manual 67
  • D-Link DAP-3320 | User Manual - Page 73
    the Bandwidth: Uplink/Downlink Setting window. Uplink The uplink bandwidth in Mbits per second. This value is entered in the Uplink/ Bandwidth: Downlink Setting window. D-Link DAP-3320 User Manual 68
  • D-Link DAP-3320 | User Manual - Page 74
    Section 3 - Configuration Status Device Information This read-only window displays the configuration settings of the DAP-3320, including the firmware version and the device's MAC address. D-Link DAP-3320 User Manual 69
  • D-Link DAP-3320 | User Manual - Page 75
    address of the client. Band: Displays the wireless band that the client is connected to. Authentication: Displays the type of authentication being used. Signal: Displays the client's signal strength. Power Displays the status of the power saving feature. Saving Mode: D-Link DAP-3320 User Manual 70
  • D-Link DAP-3320 | User Manual - Page 76
    the DAP-3320. Name: Displays the SSID of the client. MAC: Displays the MAC address of the client. Authentication: Displays the type of authentication being used. Signal: Displays the client's signal strength. Status: Displays the status of the power saving feature. D-Link DAP-3320 User Manual 71
  • D-Link DAP-3320 | User Manual - Page 77
    Section 3 - Configuration Channel Analyze Wireless 2.4 Ghz Band: Detect: Click the Detect button to scan. AP List: This will list the transmitting channels and quality. D-Link DAP-3320 User Manual 72
  • D-Link DAP-3320 | User Manual - Page 78
    Section 3 - Configuration Statistics Ethernet This page displays transmitted and received count statistics for packets and bytes. D-Link DAP-3320 User Manual 73
  • D-Link DAP-3320 | User Manual - Page 79
    Section 3 - Configuration WLAN Traffic This page displays wireless network statistics for data throughput, transmitted and received frames, and frame errors. D-Link DAP-3320 User Manual 74
  • D-Link DAP-3320 | User Manual - Page 80
    and network messages including a time stamp and message type. The log information includes but is not limited to the following items: cold start AP, upgrading firmware, client associate and disassociate with AP, and web login. The web page holds up to 500 logs. D-Link DAP-3320 User Manual 75
  • D-Link DAP-3320 | User Manual - Page 81
    IP address of the server you would like to send the DAP-3320 log to. IP Address: Log Type: Check the box for the type of activity you want to log. There are three types: System Activity, Wireless Port: Enter the SMTP port. Username: Enter your email username. D-Link DAP-3320 User Manual 76
  • D-Link DAP-3320 | User Manual - Page 82
    Section 3 - Configuration Password: Enter your email password. Confirm Enter your email password again. Password: Schedule: Select when to send the log to your email (in hours). You will receive an email when the log is full too. D-Link DAP-3320 User Manual 77
  • D-Link DAP-3320 | User Manual - Page 83
    Section 3 - Configuration Maintenance Administration Settings Check one or more of the five main categories to view the various hidden administrator parameters and settings displayed on the next five pages. D-Link DAP-3320 User Manual 78
  • D-Link DAP-3320 | User Manual - Page 84
    Administrator administrator will be allowed to log in from. VLAN ID: Limit Check to enable the Limit Administrator IP address. Administrator IP: IP Range: Enter the IP address range that the administrator will be allowed to log in from and then click the Add button. D-Link DAP-3320 User Manual 79
  • D-Link DAP-3320 | User Manual - Page 85
    System Name Settings Each of the five main categories display various hidden administrator parameters and settings. System The name of the device. The default name is D-Link DAP-3320. Name: Location The physical location of the device, e.g. 72nd Floor, D-Link HQ. D-Link DAP-3320 User Manual 80
  • D-Link DAP-3320 | User Manual - Page 86
    categories display various hidden administrator parameters and settings. Login Enter a user name. The default is admin. Name: Old When changing your password, enter the old password here. Enter the new password a second time for confirmation purposes. Password: D-Link DAP-3320 User Manual 81
  • D-Link DAP-3320 | User Manual - Page 87
    administrator parameters and settings. Status: Status is enabled by default. Uncheck the box to disable the console. Console Select the type of protocol you would like to use, Telnet or SSH. Protocol: Timeout: Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never. D-Link DAP-3320 User Manual 82
  • D-Link DAP-3320 | User Manual - Page 88
    This option is disabled by default. Public Enter the public SNMP community string. Community String: Private Enter the private SNMP community string. Community String: Trap Status: Check the box to enable Trap Status. Trap Server IP: Enter the Trap Server IP address. D-Link DAP-3320 User Manual 83
  • D-Link DAP-3320 | User Manual - Page 89
    box to enable Ping control. Ping works by sending ICMP "echo request" packets to the target host and listening for ICMP echo response replies. The default is enabled. If not enabled, the access point will not reply to pings. D-Link DAP-3320 User Manual 84
  • D-Link DAP-3320 | User Manual - Page 90
    order to simplify management. Central WiFiManager and AP Array may not be used simultaneously. Enable Central Select to enable or disable the Central WiFiManager. WiFiManager: D-Link DAP-3320 User Manual 85
  • D-Link DAP-3320 | User Manual - Page 91
    the file, click Upload to upload the file to the DAP-3320. Upload SSL Click Browse to locate the SSL Certification file on your local computer. Certification After selecting and opening the file, click Upload to upload the file to the From Local DAP-3320. Hard Drive: D-Link DAP-3320 User Manual 86
  • D-Link DAP-3320 | User Manual - Page 92
    a previously saved configuration file on your local computer. After selecting the file, click Upload to apply the configuration settings to the DAP-3320. Download Click Download to save the current DAP-3320 configuration to your local Configuration computer. File: D-Link DAP-3320 User Manual 87
  • D-Link DAP-3320 | User Manual - Page 93
    NTP server URL or IP address. Time Zone: Use manually set the time for your AP here, or you can click the and Time Copy Your Computer's Time Settings button to copy the time from the Manually: computer you are using (Make sure that the computer's time is set correctly). D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 94
    Section 3 - Configuration System System Settings Restart the Click Restart to restart the DAP-3320. Device: Restore Click Restore to restore the DAP-3320 back to factory default settings. to Factory Default Settings: D-Link DAP-3320 User Manual 89
  • D-Link DAP-3320 | User Manual - Page 95
    Section 3 - Configuration Help Help: Scroll down the Help page for topics and explanations. D-Link DAP-3320 User Manual 90
  • D-Link DAP-3320 | User Manual - Page 96
    will show you the different levels of security you can use to protect your data from intruders. The DAP-3320 offers the following types of security: • WEP (Wired Equivalent Privacy) • WPA-Personal (Wi-Fi Protected Access) • WPA-Enterprise (Wi-Fi Protected Access) D-Link DAP-3320 User Manual 91
  • D-Link DAP-3320 | User Manual - Page 97
    that is not believed to be as effective anymore. WEP uses a passphrase or key to authenticate your wireless connection. For 64-Bit WEP, the key is an alpha-numeric password that is 10 hex digits or is 26 hex digits or an ASCII password with 13 text characters. D-Link DAP-3320 User Manual 92
  • D-Link DAP-3320 | User Manual - Page 98
    the IP address of the access point (dlinkap. local). Click on Setup and then click Wireless Setup on access point with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the access point. D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 99
    on your wireless bridge or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DAP-3320 User Manual 94
  • D-Link DAP-3320 | User Manual - Page 100
    the IP address of the access point (dlinkap. local). Click on Setup and then click Wireless Setup access point with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the access point. D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 101
    Port, enter the port you are using with your RADIUS server. 1812 is the default port. 7. Next to RADIUS Server Shared Secret, enter the security key. 8. Click Advanced to enter settings for a secondary RADIUS Server. 9. Click Save Settings to save your settings. D-Link DAP-3320 User Manual 96
  • D-Link DAP-3320 | User Manual - Page 102
    . Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal, but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DAP-3320 User Manual 97
  • D-Link DAP-3320 | User Manual - Page 103
    Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DAP-3320 User Manual 98
  • D-Link DAP-3320 | User Manual - Page 104
    the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless access point. D-Link DAP-3320 User Manual 99
  • D-Link DAP-3320 | User Manual - Page 105
    menu, go to Control Panel, and then click on Network and Sharing Center. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) under Select a network to connect to and then click the Connect button. D-Link DAP-3320 User Manual 100
  • D-Link DAP-3320 | User Manual - Page 106
    Section 5 - Connecting to a Wireless Network Click Connect Anyway to continue. The utility will display the following window to indicate a connection connection. The next two pages display the windows used to connect to either a WEP or a WPA-PSK wireless network. D-Link DAP-3320 User Manual 101
  • D-Link DAP-3320 | User Manual - Page 107
    Network Configure WPA-PSK It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter. If you are joining an existing network, you will need to passphrase in the field provided and then click the Connect button. D-Link DAP-3320 User Manual 102
  • D-Link DAP-3320 | User Manual - Page 108
    If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DAP-3320 User Manual 103
  • D-Link DAP-3320 | User Manual - Page 109
    get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DAP-3320 User Manual 104
  • D-Link DAP-3320 | User Manual - Page 110
    connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DAP-3320 User Manual 105
  • D-Link DAP-3320 | User Manual - Page 111
    . Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DAP-3320 User Manual 106
  • D-Link DAP-3320 | User Manual - Page 112
    button down for 10 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is Admin and leave the password box empty. D-Link DAP-3320 User Manual 107
  • D-Link DAP-3320 | User Manual - Page 113
    Section 6 - Troubleshooting 3. Why can't I connect to certain sites or send and receive emails when connecting through my access point? If you are having a problem sending or receiving email, or : ping [url] [-f ] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DAP-3320 User Manual 108
  • D-Link DAP-3320 | User Manual - Page 114
    Click on Setup and then click Manual Configure. • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DAP-3320 User Manual 109
  • D-Link DAP-3320 | User Manual - Page 115
    Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Access point is a device used to provide this link. D-Link DAP-3320 User Manual 110
  • D-Link DAP-3320 | User Manual - Page 116
    , the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DAP-3320 User Manual 111
  • D-Link DAP-3320 | User Manual - Page 117
    up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it Remotely access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DAP-3320 User Manual 112
  • D-Link DAP-3320 | User Manual - Page 118
    home appliances such as cordless telephones, microwaves, wireless speakers, and televisions as far away as possible from the bridge/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. D-Link DAP-3320 User Manual 113
  • D-Link DAP-3320 | User Manual - Page 119
    an Access Point or wireless bridge. All the wireless devices, or clients, will connect to the wireless bridge or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 120
    the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 121
    Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DAP-3320 User
  • D-Link DAP-3320 | User Manual - Page 122
    ƒƒ WEP 64/128 bit Encryption ƒƒ 802.1X ƒƒ Access Point ƒƒ Wireless Distribution System ƒƒ SSID Broadcast disable ƒƒ MAC Address Control ƒƒ Network Access Protection (NAP) ƒƒ Internal Radius Server ƒƒ Wireless Distribution System with AP ƒƒ Wireless Client D-Link DAP-3320 User Manual 117
  • D-Link DAP-3320 | User Manual - Page 123
    Certified 1Range will vary depending on country's maximum transmit power output regulation. Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual rate. Environmental conditions will adversely affect wireless signal range. D-Link DAP-3320 User Manual 118
  • D-Link DAP-3320 | User Manual - Page 124
    Appendix D - Antenna Pattern Antenna Pattern Orientation 2.4 GHz Antenna Pattern E-Plane H-Plane D-Link DAP-3320 User Manual 119
  • D-Link DAP-3320 | User Manual - Page 125
    radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that transmitter except in accordance with FCC multi-transmitter product procedures. D-Link DAP-3320 User Manual 120
  • D-Link DAP-3320 | User Manual - Page 126
    limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. D-Link DAP-3320 User Manual 121
  • D-Link DAP-3320 | User Manual - Page 127
    non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. D-Link DAP-3320 User Manual 122
  • D-Link DAP-3320 | User Manual - Page 128
    to the Declaration of Conformity. Notice of Wireless Radio LAN Usage in The European Community: Access Point. • Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in 5 Ghz within the EU. D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 129
    Appendix E - Regulatory Information 2.4 GHz Wireless Frequency and Channel Operation in EEC Countries: Region Metropolitan Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte 2454 MHz 100 mW 2454 - 2483.5 MHz 100 mW max. EIRP Außenbereich 100 mW 100 mW 10 mW D-Link DAP-3320 User Manual 124
  • D-Link DAP-3320 | User Manual - Page 130
    iuo D-Link deklaruoja, kad šis DAP-3320 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart D-Link dat het toestel DAP-3320 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. D-Link DAP-3320 User Manual 125
  • D-Link DAP-3320 | User Manual - Page 131
    ES. Suomi [Finnish] D-Link vakuuttaa täten että DAP-3320 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Warning Statement: The power outlet should be near the device and easily accessible. D-Link DAP-3320 User Manual 126
  • D-Link DAP-3320 | User Manual - Page 132
    to the device and other equipment, observe the following precautions: Power Sources • Observe and follow service markings. • Do not push any objects into the openings of your device unless consistent with should be greater than the ratings marked on the device. D-Link DAP-3320 User Manual 127
  • D-Link DAP-3320 | User Manual - Page 133
    access the interior. • Do not spill food or liquids on your system components, and never operate the device in a wet environment. If the device gets wet, see the appropriate section in your troubleshooting guide or contact your trained service with high humidity. D-Link DAP-3320 User Manual 128
  • D-Link DAP-3320 | User Manual - Page 134
    strap. Environmental This product may contain a battery. Recycle or dispose of batteries in accordance with the battery manufacturer's instructions and local/national disposal and recycling regulations. For more information, please refer to the warranty guide. D-Link DAP-3320 User Manual 129
  • D-Link DAP-3320 | User Manual - Page 135
    the household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life Link empfiehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 136
    domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet effet par les Link diseña y fabrica sus productos para que sean lo más ecológicos posible, utilizando materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje. D-Link DAP-3320 User Manual
  • D-Link DAP-3320 | User Manual - Page 137
    imballaggio, si contribuirà a preservare l'ambiente e a salvaguardare la salute umana. D-Link e l'ambiente D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. u het milieu en de gezondheid van de mens te beschermen. D-Link DAP-3320 User Manual 132
  • D-Link DAP-3320 | User Manual - Page 138
    CO2. "Aby dowiedzieć się więcej na temat produktów i opakowań mających wpływ na środowisko prosimy zapoznać się ze stroną Internetową www.dlinkgreen.com." D-Link DAP-3320 User Manual 133
  • D-Link DAP-3320 | User Manual - Page 139
    ki a D-Link termékeket a tápforrásból, ha nem használja azokat. Ezzel segít az energia megtakarításában és a széndioxid kibocsátásának csökkentésében. Környezetbarát termékeinkről és csomagolásainkról további információkat a www.dlinkgreen.com weboldalon tudhat meg. D-Link DAP-3320 User Manual 134
  • D-Link DAP-3320 | User Manual - Page 140
    du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne. Du kan finde flere oplysninger om vores miljømæssigt ansvarlige produkter og emballage på www.dlinkgreen.com D-Link DAP-3320 User Manual 135
  • D-Link DAP-3320 | User Manual - Page 141
    att du alltid stänger av eller kopplar ur dina D-Link produkter när du inte använder dem. Genom att göra detta hjälper du till att spara energi och minska utsläpp av koldioxid. För mer information om våra miljöansvariga produkter och förpackningar www.dlinkgreen.com D-Link DAP-3320 User Manual 136
  • D-Link DAP-3320 | User Manual - Page 142
    que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar energia e reduzir as emissões de CO2. Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite www.dlinkgreen.com D-Link DAP-3320 User Manual 137
  • D-Link DAP-3320 | User Manual - Page 143
    Configure once and apply to multiple Access Points • Install on Windows PC • Access on any device using a web-browser, e.g. smartphone or notebook • Utilise user authentication and access control • Monitor your entire wireless network in real time1 • Access detailed reports • Optimise your bandwidth
  • D-Link DAP-3320 | User Manual - Page 144
    on the following products2: DAP-2695 Wireless AC1750 Indoor Access Point Designed to support small to medium business or enterprise environments. Secure, manageable dual-band wireless LAN options. DAP-2660 Wireless AC1200 Indoor Ceiling Access Point Providing enhanced speeds of Wireless AC as well
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144