D-Link ANT24-0801 Installation Guide
D-Link ANT24-0801 Manual
UPC - 790069243158
View all D-Link ANT24-0801 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link ANT24-0801 manual content summary:
- D-Link ANT24-0801 | Installation Guide - Page 1
CAUTION!! Please always put the surge protector indoors and near the device side, if you cannot keep it indoors, use the tapes to wrap all the connectors as pictures showed below. Option: Ultra low-loss cable LMR400 Length options: 3M/6M/9M Option: Surge protector Connectors: N-plug to N-jack - D-Link ANT24-0801 | Installation Guide - Page 2
- D-Link ANT24-0801 | Installation Guide - Page 3
ANT24-SP Surge protector Installation guide for outdoor antenna-kit Step 1 loosen the screw from the surge protector. surges into the grounding. Ground Step 3 find a conductive material nearby the antenna installation sites, connect another end of the wire into position, there are several options - D-Link ANT24-0801 | Installation Guide - Page 4
- D-Link ANT24-0801 | Installation Guide - Page 5
- D-Link ANT24-0801 | Installation Guide - Page 6
To have correct connection of the attached extension cable (Based on connector color management) Silver to Antenna Golden to Device - D-Link ANT24-0801 | Installation Guide - Page 7
- D-Link ANT24-0801 | Installation Guide - Page 8
- D-Link ANT24-0801 | Installation Guide - Page 9
- D-Link ANT24-0801 | Installation Guide - Page 10
To have correct connection of the attached extension cable (Based on connector color management) Silver to Antenna Golden to Device - D-Link ANT24-0801 | Installation Guide - Page 11
- D-Link ANT24-0801 | Installation Guide - Page 12
- D-Link ANT24-0801 | Installation Guide - Page 13
Pole mounting th d 2 - D-Link ANT24-0801 | Installation Guide - Page 14
- D-Link ANT24-0801 | Installation Guide - Page 15
- D-Link ANT24-0801 | Installation Guide - Page 16
50AT Omni D-Link's Omni Directional Antenna offers the most cost effective solution for extending the wireless LAN coverage area. The antenna is fully compatible with all products and can be used with any 2.40 to 2.4835 GHz products. Installation: 1. Remove the original antenna from your wireless - D-Link ANT24-0801 | Installation Guide - Page 17
- D-Link ANT24-0801 | Installation Guide - Page 18
with any 2.40 to 2.4835 GHz products. Installation: 1. Remove the original antenna from your wireless device. 2. Screw the DWL-R60AT RP- SMA connector into your wireless device. 3. Adjust the antenna to the suitable direction for extending the wireless coverage area. 6.0dBi Typical 2.0:1 Max. 90 - D-Link ANT24-0801 | Installation Guide - Page 19
DWL-1500 Outdoor Omni Antenna - D-Link ANT24-0801 | Installation Guide - Page 20
DWL-2100 Outdoor Grid Antenna N male/RP-SMA) - D-Link ANT24-0801 | Installation Guide - Page 21
ANT24-0400 Omni-directional Indoor only 4dBi 800M 300M H360 V40 150cm RP-SMA plug --NA Wall/ desktop 320g ANT24-JC For DWL-660 links *1.Extended range reference based on RF-Output Power 14dbm with default cable loss *2.The transmission distance range might depend on the two same spec antennas - D-Link ANT24-0801 | Installation Guide - Page 22
Range at 1 Mbps * Approximate Range at 11 Mbps * Half power Beam width ** Pigtail cable length Antenna fixed connector Surge protector for outdoors Default Extension Cable Length Default mounting configuration Antenna-kit weight (kg) Optional accessories ANT24-0800 Omni-directional Outdoor 8dBi - D-Link ANT24-0801 | Installation Guide - Page 23
at 1 Mbps * Approximate Range at 11 Mbps * Half power Beam width ** Pigtail cable length Antenna fixed connector Surge protector for outdoors Default Extension Cable Length Default mounting configuration Antenna-kit weight (Kg) Optional accessories ANT24-1800 Directional Outdoor 18dBi 8Km 3Km H15
CAUTION!!
Please always put the surge protector
indoors and near the device
side, if you cannot keep it indoors,
use the tapes to wrap all the connectors
as pictures showed below.
Option: Ultra low-loss cable LMR400
Length options: 3M/6M/9M
Option: Surge protector
Connectors: N-plug to N-jack