D-Link AC1300 User Manual
D-Link AC1300 Manual
 |
View all D-Link AC1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link AC1300 manual content summary:
- D-Link AC1300 | User Manual - Page 1
Document Created by Nick Schuster - D-Link AC1300 | User Manual - Page 2
D-Link DAP-2610 User Manual Table of Contents Product Overview 4 Introduction 4 Features 5 Package Contents 6 System Requirements 6 Hardware Overview 7 LEDs...7 Connections 7 Basic Installation 8 Hardware Setup 8 Method 1 - PoE with PoE Switch or Router 8 Method 2 - PoE without PoE - D-Link AC1300 | User Manual - Page 3
D-Link DAP-2610 User Manual Login Page Upload 60 IP Filter Settings 61 MAC Bypass System 88 System Settings 89 Help 90 Knowledge Base 91 Wireless Basics 91 Wireless Installation Considerations 92 Troubleshooting 93 Why can't I access the web-based configuration utility 93 What can I do if - D-Link AC1300 | User Manual - Page 4
Manual Product Overview Introduction D-Link, an industry pioneer in wireless networking, introduces a solution for businesses seeking to deploy next generation 802.11ac LANs. D-Link support for Wi-Fi Multimedia™ (WMM) Quality of Service within 5.15 ~ 5.35GHz frequency range, it is restricted to indoor - D-Link AC1300 | User Manual - Page 5
Link DAP-2610 User Manual transmission range yy Web-based configuration and management yy Supports 802.3af PoE yy Supports 802.3az yy Supports one Gigabit Mode yy Supports SNMP v1,v2,v3 yy Support Trap server (SNMP v1, v2c) yy Support Central WiFiManager yy Support AP Array and AP Array Setup Tool * - D-Link AC1300 | User Manual - Page 6
D-Link DAP-2610 User Manual • DAP-2610 Access Point • Power Adapter • Mounting Plate and Hardware • Ethernet Cable Package Contents Note: Using a power supply with a different voltage rating than the one - D-Link AC1300 | User Manual - Page 7
D-Link DAP-2610 User Manual LEDs Hardware Overview Connections 4 23 1 Solid Red Indicates the access supplied power adapter. 3 LAN (PoE) Port Connect to a Power over Ethernet (PoE) switch or router via an Ethernet cable. Press and hold for five seconds to reset the access point to 4 Reset - D-Link AC1300 | User Manual - Page 8
D-Link DAP-2610 User Manual Basic Installation Hardware Setup To power the access point, you can use one of the following 3 methods: Method 1 - Use if you have a PoE switch or router. Method 2 - Use if you do not have a PoE switch or router and do not have a power outlet near the location of the - D-Link AC1300 | User Manual - Page 9
D-Link DAP-2610 User Manual Method 2 - PoE without PoE Switch or Router 1. Connect one end of an Ethernet cable into the Data In port on the PoE base unit and the other end into one port on your switch, router, or computer. power outlet. PoE Base Unit Power Adapter DAP-2610 PC Switch or Router 9 - D-Link AC1300 | User Manual - Page 10
D-Link DAP-2610 User Manual Method 3 - No PoE 1. Connect one end of your Ethernet cable into the LAN (PoE) port and then connect the other end to a switch, router, or computer. 2. Use the supplied power adapter. Connect the power adapter to the Power receptor on the Access Point. 3. Connect the - D-Link AC1300 | User Manual - Page 11
D-Link DAP-2610 User Manual Web User Interface The DAP-2610 supports an elaborate web user interface where the user can configure and monitor the device. Launch a web browser, type the IP address of the access point ( - D-Link AC1300 | User Manual - Page 12
D-Link DAP-2610 User Manual Wireless On the wireless settings page, you can setup the basic wireless configuration for the menu. Mode: Select Access Point from the drop-down menu. Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network ( - D-Link AC1300 | User Manual - Page 13
D-Link DAP-2610 User Manual Channel: To change the channel, first toggle the Auto Channel Selection setting to Disable, and then use the drop-down menu to make the desired - D-Link AC1300 | User Manual - Page 14
Link DAP-2610 User Manual WDS with AP Mode Wireless Band: Select either 2.4GHz or 5GHz from the drop-down menu. Mode: WDS with AP mode is selected from the drop-down menu. Network Name (SSID): Service the best wireless performance. This feature is not supported in WDS with AP mode. The channel - D-Link AC1300 | User Manual - Page 15
D-Link DAP-2610 User Manual Remote AP MAC Address: Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks. Site - D-Link AC1300 | User Manual - Page 16
Link DAP-2610 User Manual WDS Mode Wireless Band: Select either 2.4GHz or 5GHz from the drop-down menu. Mode: WDS is selected from the drop-down menu. Network Name (SSID): Service provide the best wireless performance. This feature is not supported in WDS mode. Channel: All devices on the network - D-Link AC1300 | User Manual - Page 17
D-Link DAP-2610 User Manual Site Survey: Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. - D-Link AC1300 | User Manual - Page 18
Link DAP-2610 User Manual Wireless Client Mode Wireless Band: Select either 2.4 GHz or 5 GHz from the drop-down menu. Mode: Wireless Client is selected from the drop-down menu. Network Name (SSID): Service best wireless performance. This feature is not supported in Wireless Client mode. Channel: The - D-Link AC1300 | User Manual - Page 19
D-Link DAP-2610 User Manual Wireless Security Wireless security is a key concern for any wireless network installed. Unlike any other and the letters A-F. *ASCII (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging from 0-127. 19 - D-Link AC1300 | User Manual - Page 20
D-Link DAP-2610 User Manual Wi-Fi Protected Access (WPA / WPA2) WPA was created by the Wi-Fi Alliance to address the limitations and weaknesses found in WEP. This protocol - D-Link AC1300 | User Manual - Page 21
D-Link DAP-2610 User Manual WPA Mode: When WPA-Enterprise is selected, you must also select a WPA mode from the drop-down menu: AUTO (WPA or WPA2), WPA2 Only, or - D-Link AC1300 | User Manual - Page 22
Link DAP-2610 User Manual and cannot be seen on the Internet. Get IP From: Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP .168.0.50. Assign a static IP address that is within the IP address range of your network. Subnet Mask: Enter the subnet mask. All devices in - D-Link AC1300 | User Manual - Page 23
D-Link DAP-2610 User Manual IPv6 Enable IPv6: Check to enable the IPv6 Get IP From: Auto is chosen here. Choose this option the DAP-2610 can get IPv6 address automatically or use Static to set IPv6 address manually. When Auto is selected, the other fields here will be grayed out. IP Address: Enter - D-Link AC1300 | User Manual - Page 24
D-Link DAP-2610 User Manual Advanced Settings In the Advanced Settings Section the user can configure advanced settings concerning Performance, Multiple SSID, VLAN, Security, Quality of Service, AP Array, Web Redirection, DHCP Server, Filters and Scheduling. The following pages will explain settings - D-Link AC1300 | User Manual - Page 25
D-Link DAP-2610 User Manual Performance On the Performance Settings page the users can configure more to turn the wireless function On or Off. Wireless Mode: The different combination of clients that can be supported include Mixed 802.11n, 802.11g and 802.11b, Mixed 802.11g and 802.11b and 802.11n - D-Link AC1300 | User Manual - Page 26
Link DAP-2610 User Manual allows the AP to recognize IGMP queries and reports sent between routers and an IGMP host (wireless STA). When IGMP snooping is Multicast Rate: Adjust the multicast packet data rate here. The multicast rate is supported in AP mode, (2.4 GHZ and 5 GHZ) and WDS with AP mode, - D-Link AC1300 | User Manual - Page 27
D-Link DAP-2610 User Manual Wireless Resource Control The Wireless Resource Control window is . Band Steering: Use the drop-down menu to Enable the 5G Preferred function. When the wireless clients support both 2.4GHz and 5GHz and the 2.4GHz signal is not strong enough, the device will use 5G as - D-Link AC1300 | User Manual - Page 28
D-Link DAP-2610 User Manual 11n Preferred: Use the drop-down menu to Enable the 11n Preferred function. The wireless clients with 802.11n protocol will have higher priority to connect to the device. Network Utilization: Set the maximum utilization of this access point for service. The DAP-2610 - D-Link AC1300 | User Manual - Page 29
D-Link DAP-2610 User Manual Multi-SSID The device supports up to four multiple Service Set Identifiers. You can set the Primary SSID in the Basic > Wireless section. The SSID's factory default setting is dlink. The SSID can be easily - D-Link AC1300 | User Manual - Page 30
D-Link DAP-2610 User Manual Encryption: When you select Open System, toggle between Enable and Disable. If Enable is selected, the Key Type, Key Size, Key Index (1~4), Key, and Confirm - D-Link AC1300 | User Manual - Page 31
D-Link DAP-2610 User Manual VLAN VLAN List The DAP-2610 supports VLANs. VLANs can be created with a Name and VID. Mgmt (TCP stack), LAN, Primary/Multiple SSID, and WDS connection can be assigned to VLANs as - D-Link AC1300 | User Manual - Page 32
D-Link DAP-2610 User Manual Port List The Port List tab displays the current ports. If you want to configure the guest and internal networks on a Virtual LAN (VLAN), the switch and DHCP server you are using must also support VLANs. As a prerequisite step, configure a port on the switch for handling - D-Link AC1300 | User Manual - Page 33
D-Link DAP-2610 User Manual Add/Edit VLAN The Add/Edit VLAN tab is used to configure VLANs. Once you have made the desired changes, click the Save button to - D-Link AC1300 | User Manual - Page 34
D-Link DAP-2610 User Manual PVID Settings The PVID Setting tab is used to enable/disable the Port VLAN Identifier Auto Assign Status as well as to configure various types - D-Link AC1300 | User Manual - Page 35
D-Link DAP-2610 User Manual Intrusion The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your - D-Link AC1300 | User Manual - Page 36
D-Link DAP-2610 User Manual Schedule The Wireless Schedule Settings window is used to add and modify scheduling rules on the device. Click the Save button to let your changes - D-Link AC1300 | User Manual - Page 37
D-Link DAP-2610 User Manual Internal RADIUS Server The DAP-2610 features a built-in RADIUS server. Once you have finished adding a RADIUS account, click the Save button to let your - D-Link AC1300 | User Manual - Page 38
D-Link DAP-2610 User Manual ARP Spoofing Prevention The ARP Spoofing Prevention feature allows users to add IP/MAC address mapping to prevent arp spoofing attack. ARP Spoofing Prevention: This - D-Link AC1300 | User Manual - Page 39
D-Link DAP-2610 User Manual Bandwidth Optimization The Bandwidth Optimization window allows the user to manage the bandwidth of the device and arrange the bandwidth for various wireless clients. When - D-Link AC1300 | User Manual - Page 40
D-Link DAP-2610 User Manual Band: Use the drop-down menu to toggle the wireless band between 2.4GHz and 5GHz. SSID Index: Use the drop-down menu to select the - D-Link AC1300 | User Manual - Page 41
D-Link DAP-2610 User Manual AP Array AP Array Scan The AP Array window is used to create up to 32 APs on a local network to Backup Master, Slave, and Total. Current Members: This table displays all the current array members. The DAP-2610 AP array feature supports up to eight AP array members. 41 - D-Link AC1300 | User Manual - Page 42
D-Link DAP-2610 User Manual Configuration Settings In the AP array configuration settings windows, users can specify which settings all the APs in the group will inherit from the master - D-Link AC1300 | User Manual - Page 43
D-Link DAP-2610 User Manual Wireless Basic Settings Network Name (SSID): Select this option to use the same SSID. SSID Visibility: Select this option to enable SSID visibility. Auto Channel - D-Link AC1300 | User Manual - Page 44
2610 User Manual Short GI: Select this option to use the same short GI settings. Link Integrity: Select this option to use the same link integrity settings. QoS Settings: Select this option to use the same Quality of Service settings. Log Settings: Select this option to use the same log settings - D-Link AC1300 | User Manual - Page 45
D-Link DAP-2610 User Manual ARP Spoofing Select this option to use the same ARP spoofing prevention settings. Prevention: Bandwidth Select this option to use the same bandwidth optimization settings. - D-Link AC1300 | User Manual - Page 46
D-Link DAP-2610 User Manual Auto-RF In this windows, users can view and configure the automatic radio frequency settings as well as configure the the auto-initiate period and - D-Link AC1300 | User Manual - Page 47
D-Link DAP-2610 User Manual Load Balance In this window, users can view and configure the AP array's load balancing settings. Click the Save button to accept the changes made. - D-Link AC1300 | User Manual - Page 48
D-Link DAP-2610 User Manual Captive Portal Authentication Settings-Web Redirection Only The Captive Portal is interface feature here. VLAN Group : Enter the VLAN Group ID here Get IP From : Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or - D-Link AC1300 | User Manual - Page 49
D-Link DAP-2610 User Manual IP Address : Assign a static IP address that is within the IP address range of your network. Subnet Mask : Enter the subnet mask. All devices in the network must share the same subnet mask. Gateway : Enter the IP address of the gateway/router in your network. DNS : Enter - D-Link AC1300 | User Manual - Page 50
D-Link DAP-2610 User Manual Authentication Settings- Username/Password The Captive Portal is a built-in IP interface feature here. VLAN Group : Enter the VLAN Group ID here Get IP From : Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or - D-Link AC1300 | User Manual - Page 51
D-Link DAP-2610 User Manual IP (DHCP) is selected, the other fields here will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. IP Address : Assign a static IP address that is within the IP address range of your network. Subnet Mask : Enter - D-Link AC1300 | User Manual - Page 52
D-Link DAP-2610 User Manual Authentication Settings- Passcode The Captive Portal is a built-in web interface feature here. VLAN Group : Enter the VLAN Group ID here Get IP From : Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or - D-Link AC1300 | User Manual - Page 53
Link DAP-2610 User Manual grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. IP Address : Assign a static IP address that is within the IP address range the local IP address of your gateway/router. Passcode Quantity: Enter the number of ticket - D-Link AC1300 | User Manual - Page 54
D-Link DAP-2610 User Manual Authentication Settings- Remote RADIUS The Captive Portal is a built-in web IP interface feature here. VLAN Group : Enter the VLAN Group ID here Get IP From : Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if - D-Link AC1300 | User Manual - Page 55
D-Link DAP-2610 User Manual IP Address : Assign a static IP address that is within the IP address range of your network. Subnet Mask : Enter the subnet mask. All devices in the network must share the same subnet mask. Gateway : Enter the IP address of the gateway/router in your network. DNS : Enter - D-Link AC1300 | User Manual - Page 56
D-Link DAP-2610 User Manual Authentication Settings- LDAP The Captive Portal is a built-in web authentication server. When a station connects to an AP, the be functional once this selection is made. IP Address : Assign a static IP address that is within the IP address range of your network. 56 - D-Link AC1300 | User Manual - Page 57
D-Link DAP-2610 User Manual Subnet Mask : Enter the subnet mask. All devices in the network must share the same subnet mask. Gateway : Enter the IP address of the gateway/router in your network. DNS : Enter a DNS server IP address. This is usually the local IP address of your gateway/router. Server: - D-Link AC1300 | User Manual - Page 58
D-Link DAP-2610 User Manual Authentication Settings- POP3 The Captive Portal is a built-in web authentication interface feature here. VLAN Group : Enter the VLAN Group ID here Get IP From : Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or - D-Link AC1300 | User Manual - Page 59
Link DAP-2610 User Manual (DHCP) is selected, the other fields here will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. IP Address : Assign a static IP address that is within the IP address range of your gateway/router. Server: Enter the - D-Link AC1300 | User Manual - Page 60
D-Link DAP-2610 User Manual Login Page Upload In this window, users can upload a custom file, that will From Local Hard Drive: be uploaded, will be displayed. Alternatively, the path can be manually entered here. Login Page Style List : Select the wireless band and login style that will be used in - D-Link AC1300 | User Manual - Page 61
D-Link DAP-2610 User Manual IP Filter Settings Enter the IP address or network address that will be used in the IP filter rule. For example, an IP address like - D-Link AC1300 | User Manual - Page 62
D-Link DAP-2610 User Manual MAC Bypass The DAP-2610 features a wireless MAC Bypass. Once a user is finished with these settings, click the Save computer, and then click Upload. Load MAC File to Local To download MAC bypass list file, click Download Hard Driver: and to save the MAC bypass list. 62 - D-Link AC1300 | User Manual - Page 63
D-Link DAP-2610 User Manual DHCP Server Dynamic Pool Settings The DHCP address pool defines the range of the IP address that IP address of the gateway on the network. WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the - D-Link AC1300 | User Manual - Page 64
D-Link DAP-2610 User Manual Static Pool Setting The DHCP address pool defines the range of IP addresses that can be assigned the Gateway address for the wireless network. WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines - D-Link AC1300 | User Manual - Page 65
D-Link DAP-2610 User Manual Current IP Mapping List This window displays information about the current assigned DHCP dynamic and static IP address pools. This information is available when you - D-Link AC1300 | User Manual - Page 66
D-Link DAP-2610 User Manual Filters Wireless MAC ACL This page allows the user to configure Wireless MAC ACL settings for access control. Wireless Band: Displays the current wireless band - D-Link AC1300 | User Manual - Page 67
2610 User Manual This page allows the user to configure a WLAN Partition. WLAN Partition Wireless Band: Displays the current wireless band. Link Integrity: Select Enable or Disable. If the Ethernet connection between the LAN and the AP is disconnected, enabling this feature will cause the wireless - D-Link AC1300 | User Manual - Page 68
D-Link DAP-2610 User Manual Traffic Control Uplink/Downlink Setting The uplink/downlink setting allows users to customize the downlink and uplink interfaces including specifying downlink/uplink bandwidth rates in - D-Link AC1300 | User Manual - Page 69
D-Link DAP-2610 User Manual QoS Quality of Service (QoS) enhances the experience of using a network by prioritizing the traffic of different applications. The DAP-2610 supports four priority levels. Once the desired QoS settings are finished, click the Save button to let your changes take effect. - D-Link AC1300 | User Manual - Page 70
D-Link DAP-2610 User Manual Traffic Manager The traffic manager feature allows users to create traffic management rules that specify how to deal with listed client traffic and specify downlink/ - D-Link AC1300 | User Manual - Page 71
D-Link DAP-2610 User Manual Status In the Status Section the user can monitor and view configuration settings of the access point. Here the user can also view statistics about - D-Link AC1300 | User Manual - Page 72
D-Link DAP-2610 User Manual Device Information This page displays the current information like firmware version, Ethernet and wireless parameters, as well as the information regarding CPU and memory utilization. - D-Link AC1300 | User Manual - Page 73
D-Link DAP-2610 User Manual Client Information This page displays the associated clients SSID, MAC, band, authentication method, signal strength, and power saving mode for the DAP-2610 network. Client - D-Link AC1300 | User Manual - Page 74
D-Link DAP-2610 User Manual WDS Information Page This page displays the access points SSID, MAC, band, authentication method, signal strength, and status for the DAP-2610's Wireless Distribution System - D-Link AC1300 | User Manual - Page 75
D-Link DAP-2610 User Manual Channel Analyze Wireless Band: Select either 2.4Ghz or 5GHz. Detect: Click the Detect button to scan. AP List: This will list the transmitting channels and quality. 75 - D-Link AC1300 | User Manual - Page 76
D-Link DAP-2610 User Manual Stats Page Ethernet Traffic Statistics Displays wired interface network traffic information. Ethernet Traffic Statistics: This page displays transmitted and received count statistics for packets and bytes. 76 - D-Link AC1300 | User Manual - Page 77
D-Link DAP-2610 User Manual WLAN Traffic Statistics Displays throughput, transmitted frame, received frame, and WEP frame error information for the AP network. WLAN Traffic Statistics: This page displays wireless - D-Link AC1300 | User Manual - Page 78
D-Link DAP-2610 User Manual Log View Log The AP's embedded memory holds logs here. The log information includes but is not limited to the following items: cold start AP, - D-Link AC1300 | User Manual - Page 79
D-Link DAP-2610 User Manual Log Settings Enter the log server's IP address to are three types: System Activity, Wireless Activity, and Notice. Support Simple Mail Transfer Protocol for log schedule and periodical change key. It can not support Gmail SMTP port 465. Please set to Gmail SMTP port 25 - D-Link AC1300 | User Manual - Page 80
D-Link DAP-2610 User Manual Maintenance Section In the Status Section the user can monitor and view configuration settings of the access point. Here the user can also view statistics - D-Link AC1300 | User Manual - Page 81
D-Link DAP-2610 User Manual Administration Limit Administrator Check one or more of the five main Limit Administrator IP: Check to enable the Limit Administrator IP address. IP Range: Enter the IP address range that the administrator will be allowed to log in from and then click the Add button. 81 - D-Link AC1300 | User Manual - Page 82
DAP-2610 User Manual System Name Settings Each of the five main categories display various hidden administrator parameters and settings. System Name: The name of the device. The default name is D-Link DAP-2610. Location: The physical location of the device, e.g. 72nd Floor, D-Link HQ. Login Settings - D-Link AC1300 | User Manual - Page 83
D-Link DAP-2610 User Manual SNMP Settings Each of the five main categories display various hidden administrator parameters and settings. Status: Check the box to enable the SNMP functions. This - D-Link AC1300 | User Manual - Page 84
D-Link DAP-2610 User Manual Administration Central WiFiManager Settings The Central WiFiManager section is used to create a set of APs on the Internet to be organized into a single group in - D-Link AC1300 | User Manual - Page 85
D-Link DAP-2610 User Manual Firmware and SSL Upload This page allows the user to perform a future bugs and allows for new features to be added to this product. Please go to your local D-Link website to see if there is a newer version firmware available. Firmware and SSL You can upload files - D-Link AC1300 | User Manual - Page 86
D-Link DAP-2610 User Manual Configuration File Upload This page allows the user to backup and recover the current configuration of the access point in case of a unit failure. Configuration - D-Link AC1300 | User Manual - Page 87
D-Link DAP-2610 User Manual Time and Date Settings Enter the NTP server IP, choose the drop-down menu to select the Dates: correct Daylight Saving offset. Set the Date and Time Manually: A user can either manually set the time for the AP here, or click the Copy Your Computer's Time Settings button - D-Link AC1300 | User Manual - Page 88
D-Link DAP-2610 User Manual Configuration and System These options are the remaining option to choose from in more about the given options to configure without the need to consult the manual. The following pages will explain settings found in the configuration and system section in more detail. 88 - D-Link AC1300 | User Manual - Page 89
D-Link DAP-2610 User Manual System Settings On this page the user can restart the unit, perform a factory reset of the access point or clear the added language pack. Restart - D-Link AC1300 | User Manual - Page 90
D-Link DAP-2610 User Manual Help The help page is useful to view a brief description of a function available on the access point in case the manual is not present. Help: Scroll down the Help page for topics and explanations. 90 - D-Link AC1300 | User Manual - Page 91
Manual Knowledge Base Wireless Basics D-Link wireless products are based on industry standards to provide high-speed wireless connectivity that is easy to use within your home, business or public access wireless networks. D-Link and desktop systems support the same protocols priced and range from - D-Link AC1300 | User Manual - Page 92
Manual Wireless Installation Considerations The D-Link Access Point lets you access your network using a wireless connection from virtually anywhere within the operating range may have a negative effect on the range. Try to position access points, wireless routers, and computers so that the signal - D-Link AC1300 | User Manual - Page 93
D-Link DAP-2610 User Manual Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-2610. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a different - D-Link AC1300 | User Manual - Page 94
D-Link DAP-2610 User Manual How to check your IP address? After you install your network adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > - D-Link AC1300 | User Manual - Page 95
D-Link DAP-2610 User Manual How to statically assign an IP address? If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1: Windows® 2000: Click on Start > Settings > Control Panel > Network Connections Windows - D-Link AC1300 | User Manual - Page 96
D-Link DAP-2610 User Manual Standards Secure HTTP (HTTPS)) • Central WiFiManager • SNMP Support (Private MIB) • Command Line Interface (Telnet, Personal/Enterprise • WPA2™ Personal/Enterprise • WEP™ 64-/128-bit Wireless Frequency Range • 2.4 to 2.4835 GHz and 5.15 to 5.85 GHz** Certifications • - D-Link AC1300 | User Manual - Page 97
D-Link DAP-2610 User Manual Antenna Pattern Orientation 2.4 GHz Ceiling Mounted Antenna Pattern H-Plane E-Plane 2.4 GHz Wall Mounted 5 GHz Ceiling Mounted 5 GHz Wall Mounted 97 - D-Link AC1300 | User Manual - Page 98
defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part - D-Link AC1300 | User Manual - Page 99
Manual Limited Software Warranty: D-Link warrants that the software portion of the product ("Software") will substantially conform to D-Link Link's functional specifications for the Software or to refund the portion of the actual purchase price ID Number from D-Link Technical Support (USA 1-877-453 - D-Link AC1300 | User Manual - Page 100
outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the hardware, software, firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory - D-Link AC1300 | User Manual - Page 101
Manual While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link Service NONCONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY - D-Link AC1300 | User Manual - Page 102
DAP-2610 User Manual derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there - D-Link AC1300 | User Manual - Page 103
DAP-2610 User Manual For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except - D-Link AC1300 | User Manual - Page 104
D-Link DAP-2610 User Manual Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.01 March 29, 2017 104
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
 |
 |
Document Created by Nick Schuster