Crucial CT32SSDN125P05 Installation Guide
Crucial CT32SSDN125P05 - 32 GB Hard Drive Manual
 |
View all Crucial CT32SSDN125P05 manuals
Add to My Manuals
Save this manual to your list of manuals |
Crucial CT32SSDN125P05 manual content summary:
- Crucial CT32SSDN125P05 | Installation Guide - Page 1
Install Guide Crucial® mSATA Solid State Drive Equipment Needed • Crucial® mSATA SSD • Non-magnetic tip screwdriver • Your system's owner's manual Special Considerations If your Crucial mSATA SSD is intended for use as a primary storage device, we recommend the use of data migration (cloning) - Crucial CT32SSDN125P05 | Installation Guide - Page 2
Installation Instructions (Desktops and Laptops) 1. Make sure you're working in a static-safe on the motherboard (consult your owner's manual for the exact location). 7. Insert your Crucial mSATA SSD into the mSATA socket according to the illustrations in this guide. Align the notches on the mSATA - Crucial CT32SSDN125P05 | Installation Guide - Page 3
Figure 1: Installation with screws Figure 2: Installation with clips 3 - Crucial CT32SSDN125P05 | Installation Guide - Page 4
Troubleshooting Tips If your mSATA SSD won't fit into the mSATA socket, don't apply similar to others, but should be clearly labeled in your owner's manual). If your Crucial mSATA SSD still won't fit into the socket, contact Crucial Technical Support. If your system won't boot once you've finished the - Crucial CT32SSDN125P05 | Installation Guide - Page 5
and New Zealand only) www.crucial.com/support/ssd ©2013 Micron Technology, Inc. All rights reserved. Information is subject to change without notice. Crucial and the Crucial logo are trademarks or registered trademarks of Micron Technology, Inc. All other trademarks and service marks are property of
-
1 -
2 -
3 -
4 -
5
 |
 |
Install Guide
Crucial
®
mSATA Solid State Drive
Equipment Needed
•
Crucial
®
mSATA SSD
•
Non-magnetic tip screwdriver
•
Your system’s owner’s manual
Special Considerations
If your Crucial mSATA SSD is intended for use as a primary storage
device, we recommend the use of data migration (cloning)
software to move old files from your existing drive onto your new
Crucial mSATA SSD. Data migration software is available from a
variety of third-party vendors.
1