Compaq 6005 Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model
Compaq 6005 - Pro Microtower PC Manual
View all Compaq 6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 6005 manual content summary:
- Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 1
Hardware Reference Guide HP Compaq 6005 Pro Microtower Business PC - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 2
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP . Hardware Reference Guide HP Compaq 6005 Pro Microtower Business PC First Edition (September 2009) - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 3
About This Book This guide provides basic information for upgrading this computer model. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 4
iv About This Book ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 5
the Windows Logo Key 6 Serial Number Location ...7 2 Hardware Upgrades Serviceability Features ...8 Warnings and Cautions ...8 Removing the Computer Access Panel 9 Replacing the Computer Access Panel 10 Removing the Front Bezel ...11 Removing Bezel Blanks ...12 Replacing the Front Bezel ...12 - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 6
Appendix B Battery Replacement Appendix C External Security Devices Installing a Security Lock ...47 Cable Lock ...47 Padlock ...48 HP Business PC Security Lock 48 Front Bezel Security ...50 Appendix D Electrostatic Discharge Preventing Electrostatic Damage ...52 Grounding Methods ...52 Appendix E - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 7
The HP Compaq Microtower features may vary depending on the model. For a complete listing of the hardware and software installed in the computer, run the diagnostic utility (included on some computer models only). Instructions for using the utility are provided in the Troubleshooting Guide. Figure - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 8
Reader (optional)2 3 Hard Drive Activity Light 8 Dual-State Power Button 4 Microphone/Headphone Connector 9 Power On flashing red, there is a problem with the computer and it is displaying a diagnostic code. Refer to the Troubleshooting Guide to interpret the code. 1 Some models have bezel - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 9
I/II ● CompactFlash Card ● CompactFlash Card ● MicroDrive Type 1 Type 2 7 MS PRO/MS PRO DUO ● Memory Stick (MS) ● Memory Stick Select ● Memory Stick PRO ● MagicGate Memory Stick (MG) ● Memory Stick Duo (MS Duo) Duo (MS PRO Duo) ● Memory Stick PRO- ● MagicGate Memory ● Memory Stick PRO HG - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 10
Monitor Connector 5 RJ-45 Network Connector 10 Universal Serial Bus (USB) NOTE: Arrangement and number of connectors may vary by model. An optional second serial port and an optional parallel port are available from HP the Computer Setup (F10) Utility Guide. 4 Chapter 1 Product Features ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 11
Keyboard Table 1-4 Keyboard Components 1 Function Keys Perform special functions depending on the software application being used. 2 Editing Keys Includes the following: Insert, Home, Page Up, Delete, End, and Page Down. 3 Status Lights Indicate the status of the computer and keyboard - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 12
Logo Key functions are available in Microsoft Windows XP and Microsoft Windows Vista. Windows Logo Key Displays or hides the Start menu Windows Logo Key + d Displays the Desktop Windows Logo Key + m Minimizes all open applications Shift + Windows Logo Key + m Undoes Minimize All Windows - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 13
serial number and product ID number that are located on the top cover of the computer. Keep these numbers available for use when contacting customer service for assistance. Figure 1-3 Serial Number and Product ID Location ENWW Serial Number Location 7 - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 14
that make it easy to upgrade and service. No tools are needed for most of the installation procedures described in this chapter. Warnings and Cautions Before performing upgrades be sure to carefully read all of the applicable instructions, cautions, and warnings in this guide. WARNING! To reduce the - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 15
any security devices that prohibit opening the computer. 2. Remove all removable media, such as compact discs or USB flash power cord to avoid damage to the internal components of the computer. 5. Loosen the two captive thumbscrews (1) that secure the access panel to the computer chassis. 6. Use the - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 16
back end of the access panel onto the unit (2). Figure 2-2 Replacing the Computer Access Panel 2. Ensure that the panel is completely closed (1) and tighten the two thumbscrews that secure the access panel to the chassis (2). Figure 2-3 Tightening the Access Panel Thumbscrews 10 Chapter 2 Hardware - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 17
the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. Remove the computer access panel. 6. Lift up the three tabs on the side of the bezel (1), then rotate the bezel off the chassis (2). Figure - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 18
drive bays that need to be removed before installing a drive. To remove a bezel blank: 1. Remove the access panel and front bezel. 2. To remove a bezel blank, push the two retaining tabs that hold the bezel it into place. Figure 2-6 Replacing the Front Bezel 12 Chapter 2 Hardware Upgrades ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 19
dynamic random access memory (DDR3SDRAM) dual inline memory modules (DIMMs). DIMMs The memory sockets on the system board can be populated with up to four industry-standard DIMMs. These memory sockets are populated with at least one preinstalled DIMM. To achieve the maximum memory support, you can - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 20
two sockets per channel. The sockets are labeled XMM1, XMM2, XMM3, and XMM4. Sockets XMM1 and XMM3 operate in memory channel A. Sockets XMM2 and XMM4 operate in memory display a POST error message indicating that a memory module must be installed in the wrong socket. 14 Chapter 2 Hardware Upgrades - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 21
AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system board. If you see an LED light on the system board, voltage is still present. The memory module sockets have gold-plated metal contacts. When upgrading the memory, it is - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 22
access panel. 10. Reconnect the power cord and turn on the computer. 11. Lock any security devices that were disengaged when the access panel was removed. The computer should automatically recognize the additional memory the next time you turn on the computer. 16 Chapter 2 Hardware Upgrades ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 23
Removing or Installing an Expansion Card The computer has one PCI expansion slot, two PCI Express x1 expansion slots, and one PCI the power cord to avoid damage to the internal components of the computer. 5. Remove the access panel. 6. Locate the correct vacant expansion socket on the system board - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 24
installing an expansion card, remove the expansion slot cover or the existing expansion card. NOTE: Before removing an installed expansion card, . a. If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot cover on the back of the chassis. Pull the - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 25
the chassis to release it from the chassis frame. Be sure not to scrape the card against the other components. Figure 2-12 Removing a Standard PCI Expansion Card c. If you are removing a PCI Express x16 card, pull the retention arm on the back of the expansion socket away from the card and carefully - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 26
installing a new expansion card, install an expansion slot cover to close the open slot. CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of seats properly in the expansion card slot. 20 Chapter 2 Hardware Upgrades ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 27
computer. 16. Lock any security devices that were disengaged when the access panel was removed. 17. Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide for instructions on using Computer Setup. Drive Positions Figure 2-16 Drive Positions ENWW Drive Positions 21 - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 28
1 Two 5.25-inch external drive bays for optional drives (optical drives shown) 2 One 3.5-inch external drive bay for optional the storage devices installed in the computer, run Computer Setup. Refer to the Computer Setup (F10) Utility Guide for more information. 22 Chapter 2 Hardware Upgrades ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 29
hard drive) use M3 metric screws. The HP-supplied metric screws are black and the HP-supplied isolation mounting screws are silver and blue. If you are replacing the primary hard drive, you must remove the four silver and blue 6-32 isolation mounting guide screws from the old hard drive and install - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 30
are inserting or removing a drive, shut down the operating system properly, turn off the computer, and unplug the power cord. Do not remove a drive while the liquids, temperature extremes, or products that have magnetic fields such as monitors or speakers. If a drive must be mailed, place the drive - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 31
if you are installing an eSATA adapter. Select Storage > Storage Options > eSATA Port to reconfigure the SATA3 connector. Refer to the Computer Setup (F10) Utility Guide for more information. ENWW Installing and Removing Drives 25 - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 32
removable media should be taken out of a drive before removing the drive from the computer. 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable computer. 5. Remove the access panel and front bezel. illustrations. a. If you are removing a 5.25-inch optical drive - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 33
b. If you are removing a media card reader, disconnect the USB cable from the system board. If the media card reader has a 1394 port, disconnect 2-20 Disconnecting the Media Card Reader USB Cable Figure 2-21 Disconnecting the Media Card Reader 1394 Cable ENWW Installing and Removing Drives 27 - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 34
drive bracket (1) for the drive you want to remove, then slide the drive from its drive bay (2). Figure 2-22 Removing the External Drives 8. Remove the four guide screws (two on each side) from the old drive. You will need these screws to install a new drive. 28 Chapter 2 Hardware Upgrades ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 35
the front bezel then remove the bezel blank. See Removing Bezel Blanks on page 12 for more information. 6. Remove the access panel and front bezel. 7. Install four M3 metric guide screws in the lower holes on each side of the drive. HP has provided eight extra M3 metric guide screws on the front - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 36
8. Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until the drive snaps into place. Figure 2-24 Sliding the External Drives into the Drive than a 30 mm (1.18 in) radius. A sharp bend can break the internal wires. 30 Chapter 2 Hardware Upgrades ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 37
Connections on page 25 for an illustration of the system board drive connectors. 11. Replace the front bezel and computer access panel. ENWW Installing and Removing Drives 31 - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 38
12. Reconnect the power cord and any external devices, then turn on the computer. 13. Lock any security devices that were disengaged when the access panel was removed. 32 Chapter 2 Hardware Upgrades ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 39
system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. Remove the access panel. 6. Disconnect the power cable (1) and data cable (2) from the back of the hard drive. Figure 2-28 Disconnecting the Hard Drive Cables - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 40
7. Release the drive by pulling the release tab away from the drive (1) and sliding the drive out of the bay (2). Figure 2-29 Removing a Hard Drive 8. Remove the four guide screws (two on each side) from the old drive. You will need these screws to install a new drive. 34 Chapter 2 Hardware - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 41
support Parallel ATA (PATA) hard drives. 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable Remove the access panel. 6. Install the four guide screws (two on each side) that were removed from the old drive into the new drive. The screws help guide - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 42
drive bay, making sure to align the guide screws with the guide slots, until the drive snaps into place cable to the dark blue connector labeled SATA0 to avoid any hard drive performance problems. If you are adding a second hard drive, connect the data cable to 36 Chapter 2 Hardware Upgrades ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 43
from the old hard drive so that you can transfer the data to the new hard drive. 1. Unlock the hard drive carrier with the key provided and slide the carrier out of the enclosure. 2. Remove the screw from the rear of the carrier (1) and slide the top cover off the carrier (2). Figure - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 44
the thermal sensor to the top of the hard drive (1) and move the thermal sensor away from the carrier (2). Figure 2-34 Removing the Thermal Sensor 4. Remove the four screws from the bottom of the hard drive carrier. Figure 2-35 Removing the Security Screws 38 Chapter 2 Hardware Upgrades ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 45
back to disconnect it from the carrier then lift it up and out of the carrier. Figure 2-36 Removing the Hard Drive 6. Place the new hard drive in the carrier then slide the hard drive back so the carrier's circuit board. Figure 2-37 Replacing the Hard Drive ENWW Installing and Removing Drives 39 - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 46
(1) and attach the thermal sensor to the top of the hard drive with the adhesive strip (2). Figure 2-39 Replacing the Thermal Sensor 40 Chapter 2 Hardware Upgrades ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 47
and lock it with the key provided. NOTE: The carrier must be locked for power to be supplied to the hard drive. ENWW Installing and Removing Drives 41 - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 48
A Specifications Table A-1 Specifications Desktop Dimensions Height 14.85 in 37.72 cm Width 6.95 in 17.65 cm Depth 16.85 in 42.80 cm Approximate Weight 23.5 lb - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 49
VAC 2.75A @ 230 VAC EPA 87/89/85% @ 20/50/100% load PS 5.5A @ 115 VAC 2.75A @ 230 VAC 1 This system utilizes an active power factor corrected power supply. This allows the system to pass the CE mark requirements for use in the countries of the European Union. The active power - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 50
or dispose of in fire or water. Replace the battery only with the HP spare designated for this product. CAUTION: Before replacing the battery, it is When the battery is removed or replaced, the CMOS settings will be cleared. Refer to the Computer Setup (F10) Utility Guide for information on backing - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 51
battery. 7. Depending on the type of battery holder on the system board, complete the following instructions to replace the battery. Type 1 a. Lift the battery out of its holder. Figure B-1 Removing a Coin Cell Battery (Type 1) b. Slide the replacement battery into position, positive side up. The - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 52
on power to the computer. 10. Reset the date and time, your passwords, and any special system setups using Computer Setup. Refer to the Computer Setup (F10) Utility Guide. 11. Lock any security devices that were disengaged when the access panel was removed. 46 Appendix B Battery Replacement ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 53
on data security features, refer to the Computer Setup (F10) Utility Guide, the Desktop Management Guide, and the HP ProtectTools Security Manager Guide (some models) at http://www.hp.com. Installing a Security Lock The security locks displayed below and on the following pages can be used to secure - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 54
Padlock Figure C-2 Installing a Padlock HP Business PC Security Lock 1. Fasten the security cable by looping it around a stationary object. Figure C-3 Securing the Cable to a Fixed Object 48 Appendix C External Security Devices ENWW - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 55
2. Thread the keyboard and mouse cables through the lock. Figure C-4 Threading the Keyboard and Mouse Cables 3. Screw the lock to the chassis using the screw provided. Figure C-5 Attaching the Lock to the Chassis ENWW Installing a Security Lock 49 - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 56
The front bezel can be locked in place by installing a security screw provided by HP. To install the security screw: 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as compact discs or USB flash drives, from the computer. 3. Turn off - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 57
6. Remove the security screw from the inside of the front bezel. Figure C-7 Retrieving the Front Bezel Security Screw 7. Replace the front power cord and turn on the computer. 11. Lock any security devices that were disengaged when the access panel was removed. ENWW Installing a Security Lock 51 - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 58
static-free workstations. ● Place parts on a grounded surface before removing them from their containers. ● Avoid touching pins, leads, or HP authorized dealer, reseller, or service provider. NOTE: For more information on static electricity, contact an HP authorized dealer, reseller, or service - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 59
(4-inch) clearance on all vented sides of the computer and above the monitor to permit the required airflow. ● Never restrict the airflow into the desktop unit as this also restricts airflow. ● Never operate the computer with the access panel or any of the expansion card slot covers removed. - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 60
to sudden changes in temperature, as condensation may form inside the unit. If the temperature suddenly changes and have it checked by an authorized HP service provider. Shipping Preparation Follow these suggestions when power is turned off. 2. Remove and store all removable media. 3. Turn off the - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 61
23 expansion card 17 guide screws 23 hard drive 35 media card reader 29 memory 13 optical drive 29 removable hard drive 37 security locks 47 K keyboard components 5 connector 4 L line-in connector 4 line-out connector 4 locks cable lock 47 front bezel 50 HP Business PC Security Lock 48 padlock - Compaq 6005 | Hardware Reference Guide - HP Compaq 6005 Pro Microtower Model - Page 62
Express card 19 S security cable lock 47 front bezel 50 HP Business PC Security Lock 48 padlock 48 serial connector 4 serial number location 7 shipping preparation 54 specifications computer 42 memory 13 system board drive connections 25 U unlocking access panel 47 USB ports front panel 2 rear panel
Hardware Reference Guide
HP Compaq 6005 Pro Microtower Business PC