Compaq 261615-003 Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550
Compaq 261615-003 - S 9500 - 19" CRT Display Manual
UPC - 720591213633
View all Compaq 261615-003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 261615-003 manual content summary:
- Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 1
CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 Document Part Number: 346224-002 January 2004 This guide provides information on setting up the monitor, installing drivers, using the onscreen display menu, troubleshooting, regulatory notices, and technical specifications. Enhanced for accessibility. - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 2
warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be in damage to equipment or loss of information. Reference Guide CRT Monitors 5500, v72, mx704, 7500, 7550, 9500 Second Edition (January 2004) Document - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 3
Speakers to the Monitor 3-5 Using the JBL Speaker Security Lock 3-6 Connecting Portable Output Devices to the JBL Speakers 3-7 Plugging Headphones into the Computer 3-7 4 Operation Information Files 4-1 Front Panel Controls 4-2 On-Screen Display 4-4 On-Screen Display Functions 4-5 Reference - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 4
Using the Energy Saver Mode 4-12 A Troubleshooting Solving Common Problems A-1 Using the Worldwide Web A-4 Preparing to Call Technical Support A-4 B Technical Specifications 5500/15" Series Korean Notice C-4 EPA Energy Star Compliance C-4 Power Cord Set Requirements C-4 iv Reference Guide - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 5
contains: CRT monitor Monitor Base (pre-attached on select models) Monitor AC power cord (select models) Speakers and power adapter (select models) Documentaion kit Reference Guide 1-1 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 6
disconnect the power to the equipment, unplug the power cord from the power outlet by grasping the plug firmly. Never pull on the cord. Reference Guide 2-1 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 7
or damaged, first unplug from power oulet, then contact your Hewlett Packard authorized dealer, reseller, or service provider. Adjust only those controls that are discussed in the operating instructions. Place your monitor at least 3 inches (76 mm) away from walls or other enclosures. Use only - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 8
with strong magnetic fields. In a two-monior system, place your monitors as far apart from one another as possible to lessen interference between them. Reference Guide 2-3 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 9
panel controls or the monitor screen. Removing the Monitor Base In the event that you need to disassemble the base from the monitor, follow these instructions: 1. If you must remove the base attachment, release the catch and slide the base toward the back of your monitor. 2. Lift the base up and - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 10
3 Installation Attaching the Monitor Base On some monitors, the base must be attached prior to setting up the monitor. To attach the base: 1. Align the hooks on the base with the sockets on the bottom of the monitor and attach the base. Reference Guide 3-1 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 11
: To avoid damaging the video cable, ensure that the cable aligns with the 15-pin connector. Do not force the cable onto the connector. 3-2 Reference Guide - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 12
cord to a power outlet. 4. Power on your computer and monitor. If your monitor fails to function properly, refer to Appendix A, "Troubleshooting." 5. If necessary, adjust the front panel monitor controls according to your personal preference. See "Front Panel Controls" for detailed information - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 13
speakers, this connection is not necessary. 4. Attach the green connector 6 from the control speaker 1 to the green port on the back of the computer. 3-4 Reference Guide - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 14
speaker hook mechanism 2. Align the hooks with the slots in the monitor. 3. Gently insert the hooks into the slots and slide down into place. Reference Guide 3-5 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 15
the security lock screw to secure the speaker to the monitor. 6. Reattach the grill to the speaker. 7. Repeat this process for the other speaker. 3-6 Reference Guide - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 16
labeled Out, Line Out or Speaker. You may need to disconnect the speakers to connect the headphones. The speakers do not have a headphone port. Reference Guide 3-7 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 17
A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord icons to adjust as needed. Move the object f arther away. Reference Guide A-1 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 18
Troubleshooting Problem Possible Cause Solution Monitor may have been moved or inadvertently bumped. Press the SELECT button to access the On-Screen may need adjustment. Press the SELECT button to access the On-Screen Display. Select V. Position to adjust as needed. A-2 Reference Guide - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 19
Troubleshooting Problem Possible Cause Solution "No Signal" is higher than what and enter Safe Mode. your monitor supports. Change your settings to a supported setting (see "Technical Specifications"). Restart your computer so place objects on top of the monitor. Reference Guide A-3 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 20
the Worldwide Web Before contacting customer services, refer to the support Web site at: http://www.hp.com/support. Preparing to Call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. Have the following information - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 21
75 Hz 85 Hz 70 Hz 75 Hz 85 Hz (preferred resolution) 60 Hz (maximum resolution) 30 to 54 KHz 50 to 120 Hz Reference Guide B-1 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 22
C to 60o C 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO'99 Select models meet MPRII Yes B-2 Reference Guide - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 23
30 amps @ 120V 60 amps @ 220V Power Consumption 100 W (Max.) Dimension (W x H x D) 16.6 x 17 x 17.5 inches (maximum) Unpacked w/attached base 410 x 432 x 445 mm (maximum) Reference Guide B-3 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 24
C to 60o C 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO'99 Select models meet MPRII Yes B-4 Reference Guide - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 25
30 amps @ 120V 60 amps @ 220V Power Consumption 100 W (Max.) Dimension (W x H x D) 16.1 x 17 x 17.4 inches (maximum) Unpacked w/attached base 410 x 432 x 442 mm (maximum) Reference Guide B-5 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 26
C to 60o C 20% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO'99 Select models meet MPRII Yes B-6 Reference Guide - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 27
240V AC 50 +3 to 60 +3 Hz 30 amps @ 120V 60 amps @ 220V 100 W (Max.) 16.6 x 17 x 17.5 inches (maximum) 410 x 432 x 445 mm (maximum) Reference Guide B-7 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 28
% to 80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO'99 or TCO'03 Select models meet MPRII Yes B-8 Reference Guide - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 29
30 amps @ 120V 60 amps @ 220V Power Consumption 100 W (Max.) Dimension (W x H x D) 16.1 x 17 x 17.4 inches (maximum) Unpacked w/attached base 410 x 432 x 442 mm (maximum) Reference Guide B-9 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 30
80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO'99 or TCO'03 Select models meet MPRII Yes B-10 Reference Guide - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 31
Analog Sync. TTL Separate 15-pin D-sub connector 100 to 240V AC 50 +3 to 60 +3 Hz 30 amps @ 120V 60 amps @ 220V 130 W (Max.) Reference Guide B-11 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 32
80% (non-condensing) Up to 10,000 ft./3048 meters Select models meet TCO'99 or TCO'03 Select models meet MPRII Yes B-12 Reference Guide - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 33
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference Packard Company may void the user's authority to operate the equipment. User Guide C-1 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 34
, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. C-2 User Guide - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 35
): EN55022 (CISPR 22) - Electromagnetic Interference EN55024 (IEC61000-4-2,3,4,5,6,8,11) - Electromagnetic Immunity EN61000-3-2 (IEC61000-3-2) - Power Line Harmonics EN61000-3-3 (IEC61000-3-3) - Power Line Flicker EN60950 (IEC950) - Product Safety User Guide C-3 - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 36
efficiency. Specific details on using the Energy Saving features can be found in the energy saver or power management section of the computer manual. Power Cord Set Requirements The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on - Compaq 261615-003 | Reference Guide - CRT Monitors 5500, v72, mx704, 7500, 7550 - Page 37
the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact your HP authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against
Reference Guide
CRT Monitors 5500, v72,
mx704, 7500, 7550, 9500
Document Part Number: 346224-002
January 2004
This guide provides information on setting up
the monitor, installing drivers, using the on-
screen display menu, troubleshooting, regulatory
notices, and technical specifications.
Enhanced for accessibility.